Answer:
I think no because the critical properties distinguishing life is adaptation to changing environment and self replication of the information encoding the life process. Fire does not change its process to adapt to its environment, e.g. moving toward more fuel or storing and conserving fuel when it is in short supply.
Hope this help you!:)
On a graph of position vs. time, a negative slope means what about motion of the object?
Answer:
Explanation:
A positive v time graph is a velocity graph. If the position/time is negative, then the slope of the line is negative. If the line is indicative of the velocity, which it is, that means that the velocity is negative (decreasing). The first choice is the one you want.
The net force determines how and if and object will
Answer:
Move. It also determines the total amount of force put on an object
Explanation:
The question is incomplete, the complete question is;
The net force determines how and if an object will?
A) make a balanced force
B) change its mass
C) move or accelerate
When unbalanced forces act on an object, the object moves or accelerates. The correct answer is option C: move or accelerate
Force is considered as a push or pull. Unbalanced forces refers to a system of forces acting in opposite direction and are not equal in magnitude.
Unbalanced forces cause an object to move or accelerate in the direction of the larger force.
Hence, The net or resultant force determines how and if an object will move or accelerate when under the action of unbalanced forces.
For more about an unbalanced forces see:
https://brainly.com/question/19054208
What is the most accurate and precise method to measure the thickness of a coin?
Answer:
The most accurate and precise method to measure the thickness of a coin would be by a micrometer screw guage.
The most accurate and precise method to measure the thickness of a coin is with the help of a screw gauge.
What is a unit of measurement?
A unit of measurement is a specified magnitude of a quantity that is established and used as a standard for measuring other quantities of the same kind.
It is determined by convention or regulation.
Any additional quantity of that type can be stated as a multiple of the measurement unit.
The smallest length that a screw gauge can measure is called its least count.
Thus, if we have to measure the thickness of a coin using a screw gauge to measure a coin is the most exact and precise approach available.
Learn more about the unit of measurement here, refer to the link given below;
brainly.com/question/12629581
#SPJ2
a man does 1500 J of work to pull a box of 150 N. what is the displacement of the box?
We know
[tex]\boxed{\sf Work\:Done=Force\times Displacement}[/tex]
[tex]\\ \sf\longmapsto 1500=150\times Displacement[/tex]
[tex]\\ \sf\longmapsto Displacement=\dfrac{1500}{150}[/tex]
[tex]\\ \sf\longmapsto Displacement=10m[/tex]
difference between uniform motion and non uniform motion
Answer:
Uniform motion is a type of motion that is characterized as the motion of an object wherein the object moves in a straight line and its velocity remains unchanged along that line, regardless of the duration of time, as it occupies equal distances at equal time interval and Non-uniform motion is described as the motion of an object wherein the object moves at different speeds and does not cover the same distance at equal time intervals, regardless of the duration of the time interval.
Answer:
hope it's help you
Explanation:
In Uniform motion, the movement of a body is along the straight line with constant speed. In non uniform motion, the movement of a body is along the straight line with variable speed. In uniform motion, the body covers equal distance in an equal interval of time.
derive an expression for resistivity of conductor of length l and area of cross section A
Answer
Resistivity R = K * L / A where resistivity is constant for material, L the length of the material and A the area of the material
K = R * A / L where R is the resistance of the material
Ella is blowing up balloons in preparation for her sister's birthday. Ella finds some balloons hanging outside the house explode after a few hours. Explain why.
Answer:
they were in the sun for long
Teenagers
when they should stop drinking.
A. tend to know
B. have difficulty bypowing
C. ignore
a box being pushed with a force of 85N right slides along the floor with a constant speed of 0.5m/s. What is the force of sliding friction on the box?
Answer:
[tex]85\; \rm N[/tex].
Explanation:
The box is sliding with a constant speed in a fixed direction (to the right.) In other words the velocity of this box is constant. Hence, this box would be in a translational equilibrium. The acceleration of this box would be zero.
By Newton's Second Law of motion, the net force on this box would be [tex]0[/tex]. In other words, forces on this box are balanced.
The question is asking for the size of the friction on the box. Assuming that the floor is horizontal. The friction on this box would also be horizontal,
The only other force that could balance that friction would be the [tex]85\; \rm N[/tex] push to the right. The direction of this push is horizontal (to the right.) Hence, the entirety of that [tex]85\; \rm N\![/tex] would be in the horizontal direction.
Thus, forces on this box in the horizontal direction would be:
The [tex]85\; \rm N[/tex] push to the right.Friction that opposes the rightward motion of the box (that is, to the left.)Since these two forces must balance each other, the size of the friction would also be [tex]85\; \rm N[/tex].
5. A child rides a pony on a circular track with a radius of 5 m Find the distance traveled and the placement
after the child has gone halfway around the track (8) Does the distance traveled increase, decrease, or stay the
same when the child completes one circuit of the track? Does the displacement increase, decrease, or stay the
same? Explain. (C) Find the distance and displacement ter a complete circuit of the track
The answer are :
A. Distance = 15.71 m , The displacement = 10 m
B. distance traveled will increase, displacement will decrease
C. The distance = 31.42 m , Displacement = 0
Difference between Distance and DisplacementDistance is a scalar quantity, while displacement is a vector quantity. Displacement is the distance travelled in a specific direction.
Given that a child rides a pony on a circular track with a radius of 5 m, after the child has gone halfway around the track
(A)
The distance traveled will be = 2[tex]\pi[/tex]r / 2
The distance = πr
The distance = 22/7 x 5
The distance = 15.71 m
The displacement = 2r
The displacement = 2 x 5
The displacement = 10 m
(B) The distance traveled will increase as the child completes one circle of the track but the displacement will decrease because the displacement in one cycle of a circular motion is zero since it is a vector quantity.
(C) The distance after a complete circuit of the track = 2πr
The distance = 2 × 22/7 × 5
The distance = 31.42 m
The displacement after a complete circuit of the track will be zero.
That is;
Displacement = 0
Therefore, the distance traveled and the displacement after the child has gone halfway around the track are 15.7 m and 10 m respectively. While the distance and displacement after a complete circle of the track are 31.42 m and 0 respectively.
Learn more about Displacement here: https://brainly.com/question/2109763
#SPJ1
How long will it take a 6000W motor to lift a 5000kg load through a height of 2.5m?
Answer:
20.4375 seconds.
Explanation:
Wattage = Work / time
Work = f * d
F = mass * acceleration
mass = 5000 kg
acceleration = force of gravity
acceleration = 9.81
Force = 5000 * 9.81
Force = 49050 N
Work = F * d
d = 2.5
Work = 49050 * 2.5
Work = 122625 Joules
Wattage = Work / time
time = work / wattage
wattage = 6000 watts
time = 122625 / 6000
time = 20.4375 seconds.
There is the more role of the moon than the sun to occur tides in the oceans,why?
Answer:
The ocean tides on earth are caused by both the moon's gravity and the sun's gravity. ... Even though the sun is much more massive and therefore has stronger overall gravity than the moon, the moon is closer to the earth so that its gravitational gradient is stronger than that of the sun.
The moon plays a larger role than the sun in causing tides in the oceans because it is much closer to Earth and has a stronger gravitational pull on our planet. The gravitational force between two objects is directly proportional to their masses and inversely proportional to the square of the distance between them.
Although the sun is much larger than the moon, its gravitational pull on Earth is much weaker because it is much farther away. The moon, on the other hand, is much smaller than the sun, but it is much closer to Earth and exerts a stronger gravitational force on our planet. This gravitational force causes the water in the oceans to bulge towards the moon, causing high tides.
In addition to the gravitational force, the shape of the ocean basins, the rotation of the Earth, and the positions of the sun and moon also play a role in causing tides. However, the moon's gravitational force is the primary factor that causes tides in the oceans.
An observer is standing next to the tracks, watching a train approach. The train travels at 30 m/s and blows its whistle at 8,000 Hz as it approaches and then passes by the observer without slowing down. Assuming the speed of sound is 340 m/s, how much of a frequency change did the observer hear?
7351.35Hz
f0= v-Vo/v-Vs × FSA
= 340-0 /340+30 ×8000
= 340/370× 8000
= 7351.35hz
The number of tickets purchased by an individual for Beckham College's holiday music festival is a uniformly distributed random variable ranging from 4 to 10.
Answer:
The mean is 4.5 and the standard deviation is 1.44. Step-by-step explanation: An uniform probability is a case of probability in which each outcome is equally as likely. For this situation, we have a lower limit of the distribution that we call a and an upper limit that we call b. The mean of the uniform probability distribution is: The standard deviation of the uniform probability distribution is: Uniformly distributed random variable ranging from 2 to 7. This means that . So The mean is 4.5 and the standard deviation is 1.44.
give one example where friction is a hindrance.
Answer:
an example of when friction is a hindrance, is if someone with shorts is sliding down a slide. their skin rubbing on the slide will cause friction and will slow them down. another example is if you're dragging a large wooden box across the floor. the wood and the floor interacting cause friction and will make it more difficult to push the box.
Explanation:
hope this helps :D
The mass of earth 6*10^24kg and radius is 400kg Now find the value of acceleration due to gravity when a object is 3600km from the earth surface
Answer:
Explanation:
the Earth is 6 xx 10^(24) kg and its radius is 6400 km. Find the acceleration due to gravity on the surface of the Earth. Updated On: 7-4-2021
Rearrange this equation so it equals d
v=dt
Answer:
Below
Explanation:
To solve for d rearrange the formula v = (d)(t) to:
d = v / t
I'm not to sure if you are using different variables but usually in physics the formula for velocity is v = d / t not v = dt
If you wanted to solve for displacement you would do:
d = (v)(t)
Hope this helps!
can u please tell and explain
Answer:
ok join me
Meeting ID: 880 8862 2283
Passcode: aU4rN0
Explanation:
help me please i will mark as brainliest
Answer:
you would be paying $1845.26
10 solve the following humeric problem - S. a What is the lift height of salu? T. object energy required to 25 kg to mass of a 10 m.
[tex]\boxed{\sf E_P=mgh}[/tex]
[tex]\\ \sf\longmapsto E_P=25(10)(10)[/tex]
[tex]\\ \sf\longmapsto E_P=25(100)[/tex]
[tex]\\ \sf\longmapsto E_P=2500J[/tex]
What is your wheel and axle
Explanation:
The wheel and axle is a type of simple machine used to make tasks easier in terms of manipulating force by applying the concept of mechanical advantage.
The following arbitrary measurements are made and the errors sited are the aximum errors A = 15.21 +0.01, B = 10.82 +0.05, C = 11.00+ 0.03. If D= A + B + C; (a) Calculate the maximum error in D. (b) if the errors sited are standard errors, calculate the standard error in D.
Maximum error in the result of the sum of measurement is equal to the sum absolute error of the individual observed measurements
(a) The maximum error in D is 0.09
(b) The standard error in D is approximately 0.034
The procedure for arriving at the above values is as follows;
The given measurements and the sited errors are;
A = 15.21 + 0.01
B = 10.82 + 0.05
C = 11.00 + 0.03
D = A + B + C
(a) Required parameter;
To calculate the maximum error in D
The equation for the propagation of error in addition is presented as follows;
Given that we have;
x = a + b
Therefore;
x + ±Δx = (a ± Δa) + (b ± Δb) = a + b ± (Δa + Δb)
∴ Δx = Δa + Δb
From the above formula, we have;
Where;
D = A + B + C
The maximum error in D = The sum of the maximum error in A, B, C
∴ The maximum error in D = 0.01 + 0.05 + 0.03 = 0.09
(b) Required parameter:
To find the standard error in D
The standard error is the sampling distribution's standard deviation, SD
Variance = SD²
The combined variance, SD² = The sum of the squares of individual standard deviations
Given that the standard errors represents the standard deviation, we get;
The combined variance, SD² = 0.01² + 0.05² + 0.03²
The combined variance, SD = √(0.01² + 0.05² + 0.03²) = 0.059
[tex]Standard \ error = \dfrac{SD}{\sqrt{n} }[/tex]
Where n = 3, for the three measurement, we get;
[tex]Standard \ error = \dfrac{\sqrt{0.01^2 + 0.05^2 + 0.03^2} }{\sqrt{3} } \approx 0.034[/tex]
The standard error in D is approximately 0.034
Learn more about maximum error and standard error here:
https://brainly.com/question/13106593
https://brainly.com/question/17164235
what is the kinetic energy of a 2,000-kg car moving at 20m/s
Answer:
400k
Explanation:
Formula for KE = [tex]\frac{1}{2} mv^{2}[/tex]
Plug in:
KE = [tex]\frac{1}{2} mv^{2}[/tex]
KE = [tex]\frac{1}{2}[/tex] × 2000 × 20^2
Solve:
1000 × 400 = 400,000 or 400k
Hope this helped.
Answer : 400000J OR 4×10^4J
Kinetic energy= 1/2mv^2
Here, m=2000kg; V=20m/s
1/2×2000×20×20=400,000J
what is momentum
what is momentum in words
Answer:
It's a strength or force
Explanation:
the quantity of motion of a moving body, measured as a product of its mass and velocity
Answer:
momentum is a quality define as the product of the mass and velocity of an object.
A coin is placed at a depth of 15 cm in a beaker from the surface of water. Therefractive index of water is 4/3.Calculate height through which the image of the coin is raised.
I found this answer on another website.
Impact of Synthetic Materials Discussion
The use of synthetic materials has pros and cons. Do you think the pros of using synthetic materials outweigh the cons? Or, do you think the cons outweigh the pros and synthetic materials should not be used? Explain.
With the below stated fact I think that the pros of using synthetic materials outweighs the cons.
Before we answer the question
If the pros of using synthetic materials outweigh the cons or otherwise, let us first establish the what a synthetic material is and its pros and cons
Synthetic material
Synthetic material is a material in which a substances are changed chemically to produce a material with different characteristics.
Types of Synthetic material
Plastic bag Synthetic fiber/cloth Artificial sweetener Synthetic fuel AspirinPros of Synthetic materials
They are used in construction because of there strong bonding They can be moldedThey can be colored into any shadeThey are cheapCons of Synthetic materials
Sometimes none degradableThey do not absorb water.They are highly flammableMelts easilyIn conclusion
Although Synthetic materials has so very pressing disadvantages to human kind it is unrefusable the importance of Synthetic materials to the day to day live of all humans
Therefore, I think that the pros of using synthetic materials outweighs the cons
For more information on this visit
https://brainly.com/question/21056290
on
when you throw a ball
the
ground
and it
bounces back to your hand,
is it elastic collision ? Explain.
Answer:
The ground hits the ball with same force with which the balls hit the ground. That's why ball bounces back.
Gravity stops it from bouncing forever.
Hope this helps..
If, on a particular day, atmospheric pressure is 730 mm
of mercury, what is this
a) in pascals
b) in atmospheres
c) in millibars?
Answer:
b) in atmostphere
Explanation:
I made lots of research and it should be b.
a. On a particular day, atmospheric pressure is 730 mm of mercury In pascals 97392.2896252, b. On a particular day, atmospheric pressure is 730 mm of mercury in atmospheres 0.960526316 atm, c. on a particular day, atmospheric pressure is 730 mm of mercury in millibars 973.70355547 mb.
a) To convert atmospheric pressure from mm of mercury to pascals, we can use the conversion factor: 1 mm Hg = 133.322387415 pascals.
Pressure in pascals = 730 mm Hg * 133.322387415 = 97392.2896252 pascals.
b) To convert atmospheric pressure from mm of mercury to atmospheres, we can use the conversion factor: 1 atm = 760 mm Hg.
Pressure in atmospheres = 730 mm Hg / 760 = 0.960526316 atm.
c) Atmospheric pressure is often expressed in millibars (mb), where 1 atmosphere is approximately equal to 1013.25 millibars.
Pressure in millibars = 0.960526316 atm * 1013.25 mb/atm = 973.70355547 mb.
Atmospheric pressure is the force exerted by the weight of air molecules in the Earth's atmosphere. It can be measured in various units, including millimeters of mercury, pascals, atmospheres, and millibars.
Converting between these units involves using conversion factors based on established relationships between them.
In this case, the provided pressure of 730 mm Hg was converted to pascals, atmospheres, and millibars using the appropriate conversion factors.
Conversions help express pressure measurements in units that are more suitable for different contexts or calculations.
Know more about atmospheric pressure:
https://brainly.com/question/28310375
#SPJ3
A hypothesis is a(n) ______________
An independent variable is__________
A dependent variable is___________
To determine the independent variable, what question can you ask yourself?
To determine the dependent variable, what questions can you ask yourself?
Answer:
It is an educated guess
Explanation:
let me know if the bottom ones need to be answered too.
Which of the following phenomena can be used to support the particle theory of light? Select all that apply.
The Photoelectric Effect
Polarization
Interference Patterns
Refraction
Reflection
