Derive the dimension of coefficient of linear expansivity

Answer:

Answer:30 cm

Answer:30 cmExplanation:

Answer:30 cmExplanation:Given=ROC= 60cm

Answer:30 cmExplanation:Given=ROC= 60cmObject be placed so that the rays that came from the object to them mirror are reflected from the mirror, and, then travel parallel to each other= 30cm at focus.

a) y(max)  = 337.76 m

b) t₁ = 5.30 s  the time for y maximum

c)t₂ =  13.60 s  time for y = 0 time when the fly finish

d) vₓ = 30 m/s        vy = - 81.32 m/s

e)x = 408 m

Equations for projectile motion:

v₀ₓ = v₀ * cosα          v₀ₓ = 60*(1/2)     v₀ₓ = 30 m/s   ( constant )

v₀y = v₀ * sinα           v₀y = 60*(√3/2)     v₀y = 30*√3  m/s

a) Maximum height:

The following equation describes the motion in y coordinates

y  =  y₀ + v₀y*t - (1/2)*g*t²      (1)

To find h(max), we need to calculate t₁ ( time for h maximum)

we take derivative on both sides of the equation

dy/dt  = v₀y  - g*t

dy/dt  = 0           v₀y  - g*t₁  = 0    t₁ = v₀y/g

v₀y = 60*sin60°  = 60*√3/2  = 30*√3

g = 9.8 m/s²

t₁ = 5.30 s  the time for y maximum

And y maximum is obtained from the substitution of t₁  in equation (1)

y (max) = 200 + 30*√3 * (5.30)  - (1/2)*9.8*(5.3)²

y (max) = 200 + 275.40 - 137.64

y(max)  = 337.76 m

Total time of flying (t₂)  is when coordinate y = 0

y = 0 = y₀  + v₀y*t₂ - (1/2)* g*t₂²

0 = 200 + 30*√3*t₂  - 4.9*t₂²            4.9 t₂² - 51.96*t₂ - 200 = 0

The above equation is a second-degree equation, solving for  t₂

t =  [51.96 ±√ (51.96)² + 4*4.9*200]/9.8

t =  [51.96 ±√2700 + 3920]/9.8

t =  [51.96 ± 81.36]/9.8

t = 51.96 - 81.36)/9.8         we dismiss this solution ( negative time)

t₂ =  13.60 s  time for y = 0 time when the fly finish

The components of the velocity just before striking the ground are:

vₓ = v₀ *cos60°       vₓ = 30 m/s  as we said before v₀ₓ is constant

vy = v₀y - g *t        vy = 30*√3  - 9.8 * (13.60)

vy = 51.96 - 133.28         vy = - 81.32 m/s

The sign minus means that vy  change direction

Finally the horizontal distance is:

x = vₓ * t

x = 30 * 13.60  m

x = 408 m

Complete Question

The Complete Question is Attached below

Answer:

[tex]E_t=2.14*10^{-13}J[/tex]

Explanation:

From the question we are told that:

Kinetic energy [tex]K.E=5*10^{-14}[/tex]

Generally, the equation for Total Energy is mathematically given by

[tex]E_t=K.E+2me[/tex]

Where

Mass of an electron in MeV

[tex]m=0.510 998 950 00 MeV[/tex]

And

Electron Charge

[tex]1.6 * 10^{-19}[/tex]

Therefore

[tex]E_t=K.E+2me[/tex]

[tex]E_t=5*10^{-14}*0.510 998 950 00*1.6 * 10^{-19}[/tex]

[tex]E_t=2.14*10^{-13}J[/tex]

Answer:

convex mirror

.....................

Answer:

convex mirror..........

Answer:

THIS IS YOUR ANSWER:

☺✍️HOPE IT HELPS YOU ✍️☺

Answer:

a = 4.9(1 - sinθ - 0.4cosθ)

Explanation:

Really not possible without a complete setup.

I will ASSUME that this an Atwood machine with two masses (m) connected by an ideal rope passing over an ideal pulley. One mass hangs freely and the other is on a slope of angle θ to the horizontal with coefficient of friction μ. Gravity is g

                                     F = ma

mg - mgsinθ - μmgcosθ = (m + m)a

      mg(1 - sinθ - μcosθ) = 2ma

      ½g(1 - sinθ - μcosθ) = a

maximum acceleration is about 2.94 m/s² when θ = 0

acceleration will be zero when θ is greater than about 46.4°

Answer:

Stress = F / A       force per unit area

A = 3.00 cm^2 = 3 E-4  m^2

F = 2.4E8 N/m^2 * 3E-4 m^2 = 7.2E4 N    max force applied

F/3 = 2.4E4 N  if force not to exceed limit   (= f)

f = M a

a = 2.4 E4 N / 1.2 E3 kg = 20 m / s^2      about 2 g

Answer:

well its about our thinking but i do believe in ghost a little

Answer:

9 Brainly hahaha ............huh

Answer:

beam of light converges to a point A. A lens is placed in the path of the convergent beam 12 cm from P.

To find the point at which the beam converge if the lens is (a) a convex lens of focal length 20 cm, (b) a concave lens of focal length 16 cm

Solution:

As per the given criteria,

the the object is virtual and the image is real (as the lens is placed in the path of the convergent beam)

(a) lens is a convex lens with

focal length, f=20cm

object distance, u=12cm

applying the lens formula, we get

f

1

=

v

1

−

u

1

⟹

v

1

=

f

1

+

u

1

⟹

v

1

=

20

1

+

12

1

⟹

v

1

=

60

3+5

⟹v=7.5cm

Hence the image formed is real, at 7.5cm from the lens on its right side.

(b) lens is a concave lens with

focal length, f=−16cm

object distance, 12cm

applying the lens formula, we get

f

1

=

v

1

−

u

1

⟹

v

1

=

f

1

+

u

1

⟹

v

1

=

−16

1

+

12

1

⟹

v

1

=

48

−3+4

⟹v=48m

Hence the image formed is real, at 48 cm from the lens on the right side.

Answer:

c = 3.00E108 m/s = 3.00E5 km/s

t = S / v = 3.84E5 / 3.00E5 = 1.28 sec

dharna is said to be concentration.. it is true

Answer:

The longest wavelength for closed at one end and open at the other is

y / 4      where y is the wavelength - that is node - antinode

The next possible wavelength is 3 y / 4 -    node - antinode - node -antinode

y / 4 = 3 m     y = 12 meters    the longest wavelength

3 y / 4 = 3 m      y = 4 meters   1 / 3 times as long

The SI unit of pressure is the pascal: 1Pa=1N/m2 1 Pa = 1 N/m 2 . Pressure due to the weight of a liquid of constant density is given by p=ρgh p = ρ g h , where p is the pressure, h is the depth of the liquid, ρ is the density of the liquid, and g is the acceleration due to gravity.

Answer:

6v

Explanation:

V=IR

V= 2* 3

V= 6 volts

Answer:

Explanation:

Unknown fork frequency is either

335 + 5.3 = 340.3 Hz

or

335 - 5.3 = 329.7 Hz

After we modify the known fork, the unknown fork frequency equation becomes either

(335 - x) + 8 = 340.3

(335 - x)  = 332.3

x = 2.7 Hz

or

(335 - x) + 8 = 329.7

(335 - x) = 321.7

x = 13.3 Hz

IF the unknown fork frequency was 340.3 Hz,

THEN the 335 Hz fork was detuned to 335 - 2.7 = 332.3 Hz

IF the unknown fork frequency was 329.7 Hz,

THEN the 335 Hz fork was detuned to 335 - 13.3 = 321.7 Hz

Answer:

Fx1 (6 m) sin 60 = 300 (3 m) cos 60  balancing torques about floor

Fx1 = 900 * 1/2 / 5.20 = 86.6 N  this is the horizontal force that must be supplied by the wall to balance torques about the floor

This is also equal to the static force of friction that must be applied at the point of contact with the floor to balance forces in the x-direction.

Fx1 = Fx2 = 86.6 N

Explanation:

The box is accelerating along the y-axis at a rate of [tex]+2.5\:\text{m/s}^2[/tex] as well as along the x-axis at a rate of [tex]+5.1\:\text{m/s}^2.[/tex] So the magnitude of the box's total acceleration is given by

[tex]a_T = \sqrt{a_x^2 + a_y^2}[/tex]

[tex]\:\:\:\:= \sqrt{(5.1\:\text{m/s}^2)^2 + (2.5\:\text{m/s}^2)^2}[/tex]

[tex]\:\:\:\:=5.7\:\text{m/s}^2[/tex]

The direction of the acceleration [tex]\theta[/tex] with respect to the horizontal direction is given by

[tex]\theta = \tan^{-1}\!\left(\dfrac{a_y}{a_x}\right) = \tan^{-1}\!\left(\dfrac{2.5\:\text{m/s}^2}{5.1\:\text{m/s}^2}\right)[/tex]

[tex]\:\:\:\:= 26.1°[/tex]

We're given

[tex]\displaystyle y_1(x) = 1 + \frac x3 + \frac{x^2}{24} + \frac{x^3}{360} + \cdots = \sum_{n=0}^\infty a_nx^n[/tex]

so let's see if we can find a closed form for the n-th term's coefficient.

Notice that

[tex]\displaystyle a_0 = 1 \\\\ a_1 = \frac13 = \frac1{1\times3} \\\\ a_2 = \frac1{24} = \frac1{(1\times3) \times (2\times4)} \\\\ a_3 = \frac1{360} = \frac1{(1\times3) \times (2\times4) \times (3\times5)}[/tex]

If the pattern continues, the next few terms are likely

[tex]\displaystyle a_4 = \frac1{8640} = \frac1{(1\times3) \times (2\times4) \times (3\times5) \times (4\times6)} \\\\ a_5 = \frac1{302400} = \frac1{(1\times3) \times (2\times4) \times (3\times5) \times (4\times6) \times (5\times7)} \\\\ a_6 = \frac1{14515200} = \frac1{(1\times3) \times (2\times4) \times (3\times5) \times (4\times6) \times (5\times7) \times (6\times8)}[/tex]

which leads up to the n-th term,

[tex]\displaystyle a_n = \frac1{(1\times3) \times (2\times4) \times \cdots \times (n\times(n+2))} = \frac2{n!(n+2)!}[/tex]

where the numerator is multiplied by 2 in order to "complete" the factorial pattern in (n + 2)!.

So we have

[tex]\displaystyle y_1(x) = \sum_{n=0}^\infty \frac2{n!(n+2)!} x^n[/tex]

Now we use reduction of order to find a linearly independent solution of the form [tex]y_2(x) = v(x)y_1(x)[/tex], with derivatives

[tex]\displaystyle \frac{\mathrm dy_2}{\mathrm dx} = v(x) \frac{\mathrm dy_1}{\mathrm dx} + y_1(x) \frac{\mathrm dv}{\mathrm dx} \\\\ \frac{\mathrm d^2y_2}{\mathrm dx^2} = v(x) \frac{\mathrm d^2y_1}{\mathrm dx} + 2 \frac{\mathrm dv}{\mathrm dx} \frac{\mathrm dy_1}{\mathrm dx} + y_1(x) \frac{\mathrm d^2v}{\mathrm dx^2}[/tex]

Substitute [tex]y_2[/tex] and its derivatives into the DE, and simplify the resulting expression to get a DE in terms of v(x) :

[tex]\displaystyle x y_1 \frac{\mathrm d^2v}{\mathrm dx^2} + \left(2x\frac{\mathrm dy_1}{\mathrm dx}+3y_1\right)\frac{\mathrm dv}{\mathrm dx} + \left(x\frac{\mathrm d^2y_1}{\mathrm dx^2}+3\frac{\mathrm dy_1}{\mathrm dx}-y_1\right)v = 0[/tex]

but since we know [tex]y_1(x)[/tex] satisfies the original DE, the last term vanishes and we're left with

[tex]\displaystyle x y_1 \frac{\mathrm d^2v}{\mathrm dx^2} + \left(2x\frac{\mathrm dy_1}{\mathrm dx}+3y_1\right)\frac{\mathrm dv}{\mathrm dx} = 0[/tex]

Reduce the order by substituting [tex]w(x)=\dfrac{\mathrm dv}{\mathrm dx}[/tex] to get yet another DE in w(x) :

[tex]\displaystyle x y_1 \frac{\mathrm dw}{\mathrm dx} + \left(2x\frac{\mathrm dy_1}{\mathrm dx}+3y_1\right)w = 0[/tex]

This equation is separable:

[tex]\displaystyle \frac{\mathrm dw}w = - \frac{2x\frac{\mathrm dy_1}{\mathrm dx}+3y_1}{xy_1}\,\mathrm dx \\\\ \frac{\mathrm dw}w = -\left(\frac2{y_1}\frac{\mathrm dy_1}{\mathrm dx} + \frac3x\right)\,\mathrm dx[/tex]

From here you would integrate to solve for w(x), then integrate again to solve for v(x), and finally for [tex]y_2(x)[/tex] by multiplying [tex]y_1(x)[/tex] by v(x). Using the fundamental theorem of calculus, you would find

[tex]\displaystyle \ln|w| = -2 \int_1^x \frac{{y_1}'(\xi)}{y_1(\xi)}\,\mathrm d\xi - 3\ln|x| + C_1 \\\\ w = \frac{C_1}{x^3} \exp\left(-2 \int_1^x \frac{{y_1}'(\xi)}{y_1(\xi)} \,\mathrm d\xi\right)\right) \\\\ v = C_1 \int_1^x \frac1{\omega^3} \exp\left(-2 \int_1^\omega \frac{{y_1}'(\xi)}{y_1(\xi)}\,\mathrm d\xi\right) \,\mathrm d\omega + C_2[/tex]

so that you end up with

[tex]\displaystyle y_2(x) = C_1 y_1(x) \int_1^x \frac1{\omega^3} \exp\left(-2 \int_1^\omega \frac{{y_1}'(\xi)}{y_1(\xi)}\,\mathrm d\xi\right) \,\mathrm d\omega + C_2y_1(x)[/tex]

But the second term is already accounted for by [tex]y_1(x)[/tex] itself, so the second solution is

[tex]\displaystyle y_2(x) = \boxed{y_1(x) \int_1^x \frac1{\omega^3} \exp\left(-2 \int_1^\omega \frac{{y_1}'(\xi)}{y_1(\xi)}\,\mathrm d\xi\right) \,\mathrm d\omega}[/tex]

You could go the extra mile and try to find a power series expression for this solution, but that's a lot of work for little payoff IMO.

Answer:

step by step

formular v^2 = u^2+2as

stop v = 0

0 = 400+2a(20)

-400=40a

a = -10 m/s^2

ans affect acceleration is 10 m/s^2

a ball is thrown vertically upward from the ground with the velocity of 30m/s. a) how long will it take to rise to its highest poitn? b) how high does the ball rise? c) how long after projection will the ball have a velocity of 10m/s? d) what is the total time of flight?

From Vf = Vo - gt, 0 = 30 - 9.8t yielding t = 3.06 sec.

From h = Vo(t) - g(t^2)/2, h = 30(3.06) - 4.9(3.06)^2 yielding h = 45.88m.

From Vn = Vo - gt, 20 - 9.8t yielding t = 2.04 sec.

Since the fall time equals the rise time, the total flight time is 2(3.06) = 6.12 sec.

Answer:

The number of neutrons or electrons in an atom can change without changing the identity of the element.

Answer:

Counterclockwise

explanation in attachment

A bio psychologist would address questions on stress, abuse and conflict when studying depression.

A bio psychologist is a person that is involved in the study of the brain and peoples behavior. This person tries to understand why people do the things or act the way they do using a biological and psychological approach.

While trying to understand the cause of this depression, the bio psychologist would

read more on

https://brainly.com/question/17343378?referrer=searchResults