5. How many moles are present in 4.20x10^24 atoms of Pb

Answer:

Quantization is the process of constraining an input from a continuous or otherwise large set of values (such as the real numbers) to a discrete set (such as the integers).

Explanation:

Quantization refers to the situation where an electromagnetic field consists of discrete energy parcels, photons.

In Chemistry , the concept that a system cannot have any possible energy value but instead is limited to certain specific energy values (states). This states depend on the specific system in question.

Under this system, Energy could be gained or lost only in integral multiples of some smallest unit of energy, a quantum (the smallest possible unit of energy).

Hence, Quantization refers to the situation where an electromagnetic field consists of discrete energy parcels, photons.

Learn more about Quantum here ;

https://brainly.com/question/16746749

#SPJ2

Answer:

See explanation

Explanation:

The IUPAC name of aspirin is 2-Acetoxybenzoic acid. It is composed of an acetoxy moiety and a benzoic acid moiety.

The compound can be hydrolysed under prolonged storage conditions to yield acetic acid which causes the vinegar like odour.

Also, one of the products of this hydrolysis bears a phenol group which reacts with FeCl3 to give a purple color.

Answer:

Aerate solution

Explanation:

aerate solution is the best way to remove CO2 from water (Carbon dioxide in the water that does not form bicarbonates is “uncombined” and can be removed by aeration).

Answer:

75

Explanation:

is the answer for your question

Answer:

B

Explanation:

Ammonia is considered a base as it's pH is 11

Answer from Gauthmath

The  compound NH3 (Ammonia) can be classified as a weak Base. Below you can learn more about Ammonia.

Ammonia is a chemical compound which is derived from the combination of Nitrogen and Hydrogen. It is denoted by the chemical formula NH3.

Ammonia is a base and when it reacts with acids to gives out salts. Physically, It is a colorless gas with a distinct characteristic of a pungent smell.

Learn more about Ammonia at  https://brainly.com/question/14445062

#SPJ9

Answer

Accordingly the order of electronegativity of the given elements would be: Fluorine > Chlorine > Bromine > Iodine. ( Fluorine has the highest electronegativity.)

Complete Question  

Complete Question is attached below

Answer:

Option A

[tex]D=A[/tex] And [tex]C>A[/tex]

Explanation:

From the question, we are told that:

The Chemical Reaction

 [tex]2A_{aq}+B_{aq} \leftrightarrow 3C_{aq}+2D_{aq}[/tex]

Generally, the equation for Equilibrium constant is mathematically given by

 [tex]K=\frac{C^c*D^d}{A^a*B^b}[/tex]

Therefore

 [tex]K=\frac{C^3*D^d}{A^2*B^b}[/tex]

Hence we conculde

 [tex]D=A[/tex] And [tex]C>A[/tex]

Therefore Option A

Answer:

22.1

Explanation:

Step 1: Calculate the number of formula units of lithium nitrate

A 5.08 L solution contains 2.68 × 10²¹ formula units per liter.

5.08 L × 2.68 × 10²¹ formula units/1 L = 1.36 × 10²² formula units

Step 2: Calculate the number of nitrate ions

Lithium nitrate dissociates completely in water according to the following equation.

LiNO₃(aq) ⇒ Li⁺(aq) + NO₃⁻(aq)

The molar ratio of LiNO₃ to NO₃⁻ is 1:1. The number of nitrate ions is 1/1 × 1.36 × 10²² = 1.36 × 10²².

Then,

log (1.36 × 10²²) = 22.1

The number of nitrate ions are present in the following aqueous solution is 13.6x10²¹, and log(base 10) value of this is 22.2.

Those salts which are completely dissociate into their ions in the solution form will known as strong electrolyte.

Lithium nitrate is a strong electrolyte and it shows complete dissociation as:

LiNO₃ → Li⁺ + NO₃⁻

Given that,

1 liter of solution containing = 2.68 x 10²¹ formula unit

5.08 L of solution containing = 5.08 x 2.68 x 10²¹ = 13.6x10²¹ formula unit

So, number of nitrate ion in given solution = 13.6x10²¹ formula unit

Log(13.6x10²¹) = 22.1

Hence, required values are 13.6x10²¹ and 22.1.

To know more about strong electrolytes, visit the below link:
https://brainly.com/question/5547666

Answer:

See detailed explanation.

Explanation:

Hey there!

In this case, according to the given information, it turns out possible for us to solve this problem by firstly calculating the moles of each element, assuming those percentages are masses, so that we divide by their molar masses:

[tex]C=\frac{18.63}{12.01}=1.55\\\\H=\frac{1.56}{1.01} =1.55\\\\O=\frac{24.82}{16.00}=1.55\\\\Cl=\frac{54.99}{35.45}=1.55[/tex]

Then, we divide all of them by 1.55 to realize the empirical formula is:

[tex]CHOCl[/tex]

Whose molar mass is 64.47 g/mol, and therefore, since the molar mass of these two is the same, we infer the molecular formula is also CHOCl.

The Lewis structure is shown on the attached document, whereas, the central atom is C and it does complete its octet as well as both O and Cl.

Regards!

Answer:

XCH₄ = 0.461

XCO₂ = 0.539

Explanation:

Step 1: Given data

Step 2: Calculate the total pressure in the container

We will sum both partial pressures.

P = pCH₄ + pCO₂

P = 431 mmHg + 504 mmHg = 935 mmHg

Step 3: Calculate the mole fraction of each gas

We will use the following expression.

Xi = pi / P

XCH₄ = pCH₄/P = 431 mmHg/935 mmHg = 0.461

XCO₂ = pCO₂/P = 504 mmHg/935 mmHg = 0.539

Answer:

0

Explanation:

answer from gauth math

Answer:

information is missing

Explanation

reaction is needed to solve the problem

how many electrons does tin have?

Answer : 2, 8, 18, 18, 4

Therefore, total electrons = 50

The nature of attack on sites in a molecule depends on the nature of such sites. The following are the nature of the sites mentioned in the question:

1) The indicated carbon in compound A is electrophilic.

2) The indicated bond in compound B is nucleophilic.

3) The indicated carbon in compound C is electrophilic.

4) The indicated carbon in compound D is neither electrophilic nor nucleophilic.

5) The indicated oxygen in compound E is nucleophilic.

The terms "electrophilic" and "nucleophilic" are very common in chemistry.

An electrophilic center is usually positively charged, has a positive dipole or is electron deficient hence it attacks negative centers. The term itself means "electron loving". That actually means that it has an affinity for negative charges.

The -I inductive effect of the bromine atom in the carbon in compound A makes that carbon atom to be electrophilic. Also, the carbonyl bond and the O C H 3 attached to the carbon in compound C also makes it electrophilic.

The term "nucleophilic" literately means "nucleus loving". That means a specie that has a high affinity for positive charges. This specie must be electron rich.

The carbon atom in compound B has a double bond which is electron rich and can attack any positive center hence it is nucleophilic. Also, the oxygen atom in E bears two lone pairs of electrons which can attack any positive center in a molecule hence the oxygen atom is also nucleophilic.

In compound D, the carbon atom is bonded to a methyl, two hydrogens and a carbon. There is a nitrogen atom two bonds away. There is no +I or -I inductive effect on this carbon atom because the nitrogen atom is far away. Therefore, the indicated carbon in compound D is neither electrophilic nor nucleophilic.

Learn more: https://brainly.com/question/17150980

Answer:

Explanation:

A balanced chemical equation refers to the reaction taking place whereby the number of atoms associated in the reactants side is equivalent to the number of atoms on the products side.

From the given information, the balanced equations are as follows:

[tex]\mathbf{(a) \ \ \ Ti(s) + O_{2(g)} \to TiO_{2(s)}}[/tex]

[tex]\mathbf{(b) \ \ \ 2Ag_{2}O \to 4Ag_{(s)} + O_{2(g)}}[/tex]

[tex]\mathbf{(c) \ \ \ 2C_3H_7OH + 9O_2 \to 6CO_2+8H_2O}[/tex]

[tex]\mathbf{(d) \ \ \ 2C_5 H_{12}O \to 10 CO_2 + 12 H_2O}[/tex]

Answer:

D

Explanation:

We have to bear in mind that the acid is a weak acid. A weak acid does not dissociate completely in solution. We will have more concentration of undissociated acid than A^- and H3O^+ and OH^- in the system at equilibrium.

Being a weak acid, there is maximum concentration of water molecules followed by that of undissiociated acid.

Hence, for this solution, the concentration of ions in solution follows the order;

[H2O] > [HA] > [A-] ~ [H3O ] > [OH-]

Answer:

A chemical bond is a lasting attraction between atoms, ions or molecules that enables the formation of chemical compounds. The bond may result from the electrostatic force of attraction between oppositely charged ions as in ionic bonds or through the sharing of electrons as in covalent bonds.

Explanation:

You have to put energy into a molecule to break its chemical bonds. The amount needed is called the bond energy. After all, molecules don't spontaneously break

Answer:

A. Cation

B. Ne

Explanation:

The ion is positively charged by 2, making it a cation.

The electron configuration of the nearest noble gas Neon is 1s22s22p6

1. A monatomic ion with a charge of 2 has an electronic configuration of 1s22s22p6 is Neon.

2. chemical symbol of the noble gas is Kr (krypton).

Isoelectronic atom or ion has the same number of valence electrons. Krypton has 36 electrons and 36 protons (atomic number 36).

Neon is a chemical element with the symbol Ne and atomic number 10. It is a noble gas. Neon is a colorless, odorless, inert monatomic gas under standard conditions, with about two-thirds the density of air. It was discovered (along with krypton and xenon) in 1898 as one of the three residual rare inert elements remaining in dry air after nitrogen, oxygen, argon, and carbon dioxide were removed. Neon was the second of these three rare gases to be discovered and was immediately recognized as a new element of its bright red emission spectrum. The name neon is derived from the Greek word, the neuter singular form of  (neos), meaning 'new'. Neon is chemically inert, and no uncharged neon compounds are known. The compounds of neon currently known include ionic molecules, molecules held together by van der Waals forces, and clathrates.

Learn more about Neon

https://brainly.com/question/22129884

#SPJ2

Answer:

a. Decrease

b. Increase

c. Increase

d. No effect

Explanation:

Glycolysis is present in muscle cells which converts glucose to pyruvate, water and NADH. It produces two molecules of ATP. Cellular respiration produces more molecules of ATP from pyruvate in mitochondria. Glycolysis increases in pyruvate kinase.

a. Loss of binding site for fructose 1,6-bisphosphate in pyruvate kinase: Decrease

b. Loss of allosteric binding site for ATP in pyruvate kinase: No effect

c. Loss of allosteric binding site for AMP in phosphofructokinase: Increase

d. Loss of regulatory binding site for ATP in phosphofructokinase: Increase

A. An important substrate in the glycolysis pathway is fructose 1,6-bisphosphate. It stimulates pyruvate kinase, an essential enzyme in glycolysis. The amount of pyruvate kinase that is activated will decrease if the fructose 1,6-bisphosphate binding site in pyruvate kinase is eliminated. As a result the rate of glycolysis in the muscle cells will probably decrease.

B. The allosteric ATP binding site of pyruvate kinase controls how active the enzyme is. However, pyruvate kinase is not significantly regulated by ATP in muscle cells. Therefore, it is unlikely that deletion of the ATP-binding allosteric site in pyruvate kinase would have no effect on the rate of glycolysis in muscle cells.

C. The rate-limiting enzyme in glycolysis, phosphofructokinase, is activated from all forms by AMP. It increases the rate of glycolysis by stimulating the activity of phosphofructokinase. If the allosteric binding site for AMP is eliminated, phosphofructokinase activation will be reduced. As a result, the rate of glycolysis in muscle cells will decrease.

D. Phosphofructokinase is inhibited allosterically by ATP. It regulates the rate of glycolysis by a feedback mechanism. High ATP concentrations cause phosphofructokinase to bind to its regulatory site, limiting its activity and delaying glycolysis. If the regulatory binding site for ATP is eliminated, the inhibitory action of ATP on phosphofructokinase would be lost. As a result, muscle cells will glycolysis at a faster rate.

Learn more about glycolysis, here:

https://brainly.com/question/26990754

#SPJ6

Answer:

A molecular formula consists of the chemical symbols for the constituent elements followed by numeric subscripts describing the number of atoms of each element present in the molecule.

Answer:

Biphenyl

Explanation:

The reaction of bromo benzene with magnesium-ether solution yields a Grignard reagent.

The byproduct of this reaction is biphenyl. It is formed when two unreacted bromobenzene molecules are coupled together.

Hence, It is advised that the bromobenzene solution be added slowly to the magnesium-ether solution so that it isn't present in a high concentration, thus reducing the amount of biphenyl by-product formed.

Answer:

56.5J

Explanation:

To find the heat energy required use the formula for the specific heat capacity which is

c=quantity of heat/mass×change in temperature

in this question c is 0.226j/g,the mass is 50g and the change in temperature is 30-25=5

therefore

0.226=Q/50×5

Q=0.226×250

=56.5J

I hope this helps

Answer:

catenation

Explanation:

Carbon atoms have four electrons to share in bonding environments to get to the ideal octet. To do this, it bonds with other carbon molecules, called catenation. Catenation is the ability of an atom to bond and share electrons with other atoms of its kind.

The question is incomplete, the complete question is shown in the image attached to this answer.

Answer:

a) Br^-

b) FeCl3

c) slower

d) see the first attached image

Explanation:

Aromatic compounds undergo electrophilic substitution sections in the presence of the appropriate electrophile.

In the reaction above, the Br^- nucleophile attacks the Lewis acid FeCl3. Recall that the nitro group is meta directing hence the incoming Br^+ electrophile is directed towards the meta position as shown in the image attached.

Note that the nitro group deactivates the ring towards electrophilic substitution hence the reaction is slower with nitrobenzene than with unsubstituted benzene.

Answer:

a) The energy transferred is 6.91 kJ

b) The internal energy is 4.90 kJ

c) The work done on the gas is - 2.01 kJ

Explanation:

Step 1: Data given

Number of moles of hydrogen gas = 2.00 moles

Pressure = constant

Temperature is heated from 294 K to 414 K

Molar heat capacity of hydrogen gas = 28.8 J/mol*K

Step 2: Calculate the energy transferred to the gas by heat.

Q = n* Cp * ΔT

⇒with Q =the energy transferred

⇒with n = the number of moles = 2.00 moles

⇒with Cp = the Molar heat capacity of hydrogen gas = 28.8 J/mol*K

⇒ with ΔT = Temperature 2 - Temperature 1 = 414 - 294 = 120K

Q = 2.00 * 28.8 * 120

Q = 6912 J = 6.91 kJ

Step 3: Calculate the increase in its internal energy.

ΔEint = n*Cv*ΔT

⇒with ΔEint = the increase in its internal energy.

⇒with n = the number of moles = 2.00 moles

⇒with Cv = The constant volume = 20.4 J/mol*K

⇒with  ΔT = Temperature 2 - Temperature 1 = 414 - 294 = 120K

ΔEint = 2.00 * 20.4 * 120

ΔEint =4896 J = 4.90 kJ

Step 4: Calculate the work done on the gas.

Work done on the gas = -Q + ΔEint

W = -6.91 kJ + 4.90 kJ

W = -2.01 kJ

Answer:

1:Part A.

[tex]\bold{42.2 g C_{12}H_{22}O_{11} \:in \:528 g H₂O}[/tex]

Mass Percent=[tex]\bold{\frac{Mass\: of \:Solute}{Mass\: of \:Solution}×100\%}[/tex]

=[tex]\frac{42.2}{528}*100\%=\bold{\underline{7.99\: or \:8\%}}[/tex]

Part B.

[tex]\bold{198\:m g\: C_{6}H_{12}O_{6} \:in\:4.71 g\: H₂O}[/tex]

mass of solute: 198mg

mass of solvent :4.71g=4710g

Mass Percent=[tex]\bold{\frac{Mass\: of \:Solute}{Mass\: of \:Solution}×100\%}[/tex]

=[tex]\frac{198}{4710}*100\%=\bold{\underline{4.20\%}} [/tex]

Part C.

[tex]\bold{8.85 g NaCl \:in \:190 g\: H₂O}[/tex]

Mass Percent=[tex]\bold{\frac{Mass\: of \:Solute}{Mass\: of \:Solution}×100\%}[/tex]

=[tex]\frac{8.85}{190}*100\%=\bold{\underline{4.66\%}}[/tex]

Answer:

It will help you !!!!!!!!!!

Answer:

[tex]\boxed {\boxed {\sf 0.078 \ L }}[/tex]

Explanation:

We are asked to find the volume of a solution given the moles of solute and molarity.

Molarity is a measure of concentration in moles per liter. It is calculated using the following formula:

[tex]molarity= \frac{moles \ of \ solute}{liters \ of \ solution}[/tex]

We know there are 0.14 moles of potassium chloride (KCl), which is the solute. The molarity of the solution is 1.8 molar or 1.8 moles of potassium chloride per liter.

Substitute these values/variables into the formula.

[tex]1.8 \ mol \ KCl/ L = \frac { 0.14 \ mol \ KCl}{x}[/tex]

We are solving for x, so we must isolate the variable. First, cross multiply. Multiply the first numerator and second denominator, then the first denominator and second numerator.

[tex]\frac {1.8 \ mol \ KCl/L}{1} = \frac{0.14 \ mol \ KCl}{x}[/tex]

[tex]1.8 \ mol \ KCl/ L *x = 1*0.14 \ mol \ KCl[/tex]

[tex]1.8 \ mol \ KCl/ L *x = 0.14 \ mol \ KCl[/tex]

Now x is being multiplied by 1.8 moles of potassium chloride per liter. The inverse operation of multiplication is division, so we divide both sides by 1.8 mol KCl/L.

[tex]\frac {1.8 \ mol \ KCl/ L *x}{1.8 \ mol \ KCl/L} = \frac{0.14 \ mol \ KCl}{1.8 \ mol \ KCl/L}[/tex]

[tex]x= \frac{0.14 \ mol \ KCl}{1.8 \ mol \ KCl/L}[/tex]

The units of moles of potassium chloride cancel.

[tex]x= \frac{0.14 }{1.8 L}[/tex]

[tex]x=0.07777777778 \ L[/tex]

The original measurements of moles and molarity have 2 significant figures, so our answer must have the same. For the number we found, that is the thousandth place. The 7 in the ten-thousandth place tells us to round the 7 up to a 8.

[tex]x \approx 0.078 \ L[/tex]

There are approximately 0.078 liters of solution.

Answer:

Part A

HCOOH(aq) + NaOH(aq) → HCOONa(aq) + H2O(l)

Part B

ClCH2CH2CO2H(aq) + NaOH(aq) ------> ClCH2CH2CO2Na(aq) + H2O(l)

Explanation:

The reaction between an alkanoic acid and a base is a neutralization reaction. The reaction occurs as follows;

RCOOH + NaOH ----> RCOONa + H2O

We have to note the fact that the net ionic reaction still remains;

H^+(aq) + OH^-(aq) ---> H2O(l)

In both cases, the reaction can occur and they actually do occur as written.