Arrange the following ions in order of increasing ionic radius.

a. sulfide ion
b. calcium ion
c. phosphide ion
d. potassium ion

Answer:

HClO₃(aq) + NaOH(aq) ⇒ NaClO₃(aq) + H₂O(l)

Explanation:

We have the products of a reaction and we have to predict the reactants. Since the products are salt and water, this must be a neutralization reaction. In a neutralization reaction, an acid reacts with a base. To form NaClO₃, the acid must be HClO₃(aq) and the base NaOH(aq). The balanced chemical equation is:

HClO₃(aq) + NaOH(aq) ⇒ NaClO₃(aq) + H₂O(l)

The pressure of hydrogen gas is 607.7 mmHg

According of Dalton's law of Partial pressure, the total pressure of a mixture of gases is the sum of the partial pressures of the individual gases in the mixture.

We can now write;

The for hydrogen collected over water, we have a mixture of hydrogen gas and water vapour.

Total pressure = pressure of hydrogen gas + vapour pressure of water

Pressure of hydrogen gas = Total pressure - vapour pressure of water

Pressure of hydrogen gas =  636 mmHg - 28.3 mmHg

Pressure of hydrogen gas = 607.7 mmHg

For more information see https://brainly.com/question/14119417

Answer:

See explanation

Explanation:

We must first write the equation of the reaction as follows;

C3H8 + 5O2 ----> 3CO2 + 4H2O

Now;

We obtain the number of moles of C3H8 = 132.33g/44g/mol = 3 moles

So;

1 mole of C3H8 yields 3 moles of CO2

3 moles of C3H8 yields 3 × 3/1 = 9 moles of CO2

We obtain the number of moles of oxygen = 384.00 g/32 g/mol = 12 moles

So;

5 moles of oxygen yields 3 moles of CO2

12 moles of oxygen yields 12 × 3/5 = 7.2 moles of CO2

We can now decide on the limiting reactant to be C3H8

Therefore;

Mass of CO2 produced = 9 moles of CO2 × 44 g/mol = 396 g of CO2

Again;

1 moles of C3H8 yields 4 moles of water

3 moles of C3H8 yields 3 × 4/1 = 12 moles of water

Hence;

Mass of water = 12 moles of water × 18 g/mol = 216 g of water

In order to obtain the percentage yield from the reaction, we have;

b) Actual yield = 269.34 g

Theoretical yield = 396 g

Therefore;

% yield = actual yield/theoretical yield × 100/1

Substituting values

% yield = 269.34 g /396 g × 100

% yield = 68%

Answer:

The concentration of HI in the final solution is 1.3 M.

Explanation:

Dilution is the reduction in concentration of a chemical in a solution. It is achieved by adding more solvent to the same amount of solute.

In other words, in a dilution, the amount of solute does not change, but the volume of the solvent does: as more solvent is added, the concentration of the solute decreases, since the volume (and weight) of the solution increases.

When dealing with dilution you will use the following equation:

C1*V1= C2*V2

In this case:

Replacing:

3 M* 0.065 L= C2*0.15 L

Solving:

[tex]C2=\frac{3 M*0.065 L}{0.15 L}[/tex]

C2= 1.3 M

The concentration of HI in the final solution is 1.3 M.

Explanation:

here's the answer to your question

Iodine's neutral atom has the following electronic configuration: 1 s² 2 s² 2 p⁶ 3 s² 3 p⁶ 4 s² 3 d¹⁰ 4 p⁶ 5 s² 4 d¹⁰ 5 p⁵. The complete ground-state electron configuration of I⁻ is  [Kr]5s² 4d¹⁰ 5p⁶.

Electronic configuration is defined as each electron moves individually within an orbital while being surrounded by an average field produced by all other orbitals. The electron configuration is used to describe an atom's ground state orbitals, but it may also be used to depict an atom that has ionized into a cation or anion by making up for any lost or gained electrons in the orbitals after it.

The ground state electronic configuration is defined as the configuration of lower energy electrons surrounding an atom's nucleus. Ground state is defined as the least energetic state feasible for a physical system.  It is important because permits us to determine the location of the excited electrons' departure and return when they release a photon.

Thus, iodine's neutral atom has the following electronic configuration: 1 s² 2 s² 2 p⁶ 3 s² 3 p⁶ 4 s² 3 d¹⁰ 4 p⁶ 5 s² 4 d¹⁰ 5 p⁵. The complete ground-state electron configuration of I⁻ is  [Kr]5s² 4d¹⁰ 5p⁶.

To learn more about electronic configuration, refer to the link below:

https://brainly.com/question/14283892

#SPJ2

Answer:

See detailed explanation.

Explanation:

Hello there!

In this case, for the given scenario, we will proceed as follows:

1. Here, we infer that the products are iron (III) hydroxide (precipitate) and calcium chloride:

[tex]3Ca(OH)_2+2FeCl_3\rightarrow 3CaCl_2+2Fe(OH)_3[/tex]

2. In this step we firstly calculate the moles of both reactants, by using their molar masses 74.093 and 162.2 g/mol respectively:

[tex]14.0gCa(OH)_2*\frac{1molCa(OH)_2}{74.093gCa(OH)_2}=0.189molCa(OH)_2 \\\\17.0gFeCl_3*\frac{1molFeCl_3}{162.2gFeCl_3}=0.105molFeCl_3[/tex]

Now, we calculate the moles of calcium hydroxide consumed by 0.105 moles of iron (III) chloride by using the 3:2 mole ratio between them:

[tex]0.105molFeCl_3*\frac{3molCa(OH)_2}{2molFeCl_3} =0.157molCa(OH)_2[/tex]

Thus, we infer that calcium hydroxide is in excess as 0.189 moles are available for it but just 0.157 moles react and therefore, iron (III) chloride is the limiting reactant.

3. Here, we use the moles of iron (III) chloride we've just computed, the 2:2 mole ratio with iron (III) hydroxide and its molar mass (106.867 g/mol) as shown below:

[tex]0.105molFeCl_3*\frac{2molFe(OH)_3}{2molFeCl_3} *\frac{106.867gFe(OH)_3}{1molFe(OH)_3} \\\\=11.2gFe(OH)_3[/tex]

Regards!

Explanation:

here's the answer to your question

Answer:

Correct ratio of carbon to hydrogen is 2:1:1

Answer:

Its actually 1:2:1

Explanation:

The molecular formula is C6H12O6 because one molecule actually contains 6 C, 12 H, and 6 O atoms. The simplest whole-number ratio of C to H to O atoms in glucose is 1:2:1, so the empirical formula is CH2O.

Answer:

I don't know ❤️

Answer:

YES STEEL CAN TURN INTO GAS .

Answer: yes it can!

Explanation:

Explanation:

The given balanced chemical equation is:

[tex]2 HI(g) <--> H_2 (g) + I_2 (g)[/tex]

The value of Kc at 445oC is 0.020.

[HI]=1.5M

[H2]=2.50M

[I2]=0.05M

The value of Qc(reaction quotient ) is calculated as shown below:

Qc has the same expression as the equilibrium constant.

[tex]Qc=\frac{[H_2][I_2]}{[HI]^2} \\Qc=(2.50Mx0.05M)/(1.5M)^2\\Qc=0.055[/tex]

Qc>Kc,

Hence, the backward reaction is favored and the formation of Hi is favored.

Among the given options, the correct answer is option d. Qc is greater than Kc; more HI will be produced.

Answer:

[tex]\rho_t=1025000 gmL^{-1}[/tex]

Explanation:

From the question we are told that:

Density of acetic acid [tex]\rho_a=205 gL^{-1}[/tex]

Density of Water [tex]\rho_w=820 gL^{-1}[/tex]

Generally the equation for Solution Density is mathematically given by

[tex]\rho_t= \rho_w+\rho_a[/tex]

[tex]\rho_t=205+820[/tex]

[tex]\rho_t=1025 gL^{-1}[/tex]

[tex]\rho_t=1025000 gmL^{-1}[/tex]

Answer:

2 m/s

Explanation:

Applying the formulae of velocity,

V = d/t............. Equation 1

Where V = Velocity of the body, d = distance, t = time

From the question,

Given: d = 600 m, t = 5 minutes = (5×60) = 300 seconds.

Substitute these values into equation 1

V = 600/300

V = 2 m/s.

Hence the velocity of the body when it travels is 2 m/s

Thermochemistry has to do with  heat evolved or absorbed in a chemical reactions. Thermochemical equations are equations in which the heat of reaction is included in the reaction equation. The reaction of moles and heat of reaction is important here.

This question has to do with thermochemistry and thermochemical equations.

The answers to each of the questions are shown below;

a) 300.52 KJ

b) 11.39 g

c) 5.78 g

The equation of the thermochemical reaction is;

2C12H26 + 37O2-------> 24CO2 + 15026KJ

Number of moles of CO2 released = 21.3g/44g/mol = 0.48 moles

From the reaction equation;

15026KJ is released when 24 moles of CO2 is released

x KJ is released when  0.48 moles of CO2 is released

x = 15026KJ  * 0.48 moles/24 moles

x = 300.52 KJ

b) If 2 moles of C12H26 released 15026KJ of heat

     x moles of C12H26  released 500.00KJ

x = 2 * 500.00KJ/15026KJ

x = 0.067 moles

Mass of C12H26 consumed =  0.067 moles * 170 g/mol = 11.39 g

c) Heat gained by water = heat released by combustion of kerosene

Heat gained by water = 0.75 Kg * 4200  * (90 -10)

Heat gained by water = 252 KJ

If 2 moles of C12H26  produced 15026KJ

x moles of C12H26  produces 252 KJ

x = 2 * 252/15026

x = 0.034 moles

Mass of C12H26   = 0.034 moles *  170 g/mol = 5.78 g

For more information on thermochemical equations see

https://brainly.com/question/21492209

Answer:B) 1s 2s 2p 3s 3p 4s 3d

Explanation:

The ground state electron configuration shows how the electrons in the atomic orbitals of an atom are in their lowest , most stable energy arrangements and since Electrons must be filled following the Aufbau's principle(electrons fill lowest energy shells first)

Now, Titanium lies in period IV and  group 4 of the periodic table with 22 as its atomic number

Thus, the ground-state electron configuration of a neutral atom of titanium is 1s²2s²2p⁶3s²3p⁶4s²3d².  

Answer:

Carbohydrates, proteins, and fats are biological macromolecules that are made up of chemical elements which are inherent to chemistry.

Chemistry explain how these macromolecules are bonded together at the molecular level and give an explanation for their behavior.

Explanation:

Answer:

to the left

Explanation:

If the concentration of products is increased for a reaction that is in equilibrium, the equilibrium would shift to the left side of the reaction (the reactant's side).

For a reaction that is in equilibrium, the reaction is balanced between the reactants and the products. According to Le Cha telier's  principle, if one of the constraints capable of influencing the rate of reactions is applied to such a reaction that is in equilibrium, the equilibrium would shift so as to neutralize the effects created by the constraint.

Hence, in this case, if the concentration of the products of a reaction in equilibrium is increased, the equilibrium would shift in such a way that more reactants are formed so as to annul the effects created by the increase in the concentration of the products. Since reactants are always on the left side of chemical equations, it thus means that the equilibrium would shift to the left.

Answer:

-376 kJ

Explanation:

The first step equation:

[tex]\mathsf{N_{2(g)} + 3H_2{(g)} \to 2NH_3{(g)} \ \ \ \Delta H = -92\ kJ}[/tex]    ---- (1)

The second step equation:

[tex]\mathsf{NH_{3(g)} + 2O_2{(g)} \to HNO_3{(g)} +H_2O_{(g)} \ \ \ \Delta H = -330\ kJ}[/tex]      ---- (2)

To determine the enthalpy of formation for 1 mole of HNO₃ (nitric acid), we have the following.

From the above equations; let multiply equation (1) by 1 and equation (2) by 2.

[tex]\mathsf{N_{2(g)} + 3H_2{(g)} \to 2NH_3{(g)} \ \ \ \Delta H = -92\ kJ}[/tex]     ---- (3)

[tex]\mathsf{2NH_{3(g)} + 4O_2{(g)} \to 2HNO_3{(g)} +2H_2O_{(g)} \ \ \ \Delta H = 2(-330)\ kJ}[/tex]      ----- (4)

adding the above two equations, we have:

[tex]\mathsf{N_{2(g)} + 3H_2{(g)}+ 2NH_{3(g)} + 4O_{2(g)} \to 2HNO_{3(g)} + 2NH_3{(g)} +2H_2O_{(g)} \ \ \ \Delta H = (-660 \ kJ -92\ kJ)}[/tex][tex]\mathsf{N_{2(g)} + 3H_2{(g)} + 4O_{2(g)} \to 2HNO_{3(g)} +2H_2O_{(g)} \ \ \ \Delta H = (-752 \ kJ)}[/tex]

Now, from the recent equation, we have:

2 moles of nitric acid = -752 kJ

∴

1 mole of nitric acid will be: = (1 mole × (-752 kJ)) ÷ 2 moles

1 mole of nitric acid will be: = -376 kJ

This question is incomplete, the complete question is;

Dimethyl ether, a useful organic solvent, is prepared in two steps.

In the first step, carbon dioxide and hydrogen react to form methanol and water:  

CO₂(g) + 3H₂(g)  →  CH₃OH(l) + H₂O(l)                ΔH₁ = -131.kJ

In the second step, methanol reacts to form dimethyl ether and water:

2CH₃OH(l)   →   CH₃OCH₃(g) + H₂O(l)                ΔH₂ = 8.kJ

Calculate the net change in enthalpy for the formation of one mole of dimethyl ether from carbon dioxide and hydrogen from these reactions. Round your answer to the nearest kJ.

Answer:

the net change in enthalpy for the formation of one mole of dimethyl ether is -254 kJ

Explanation:

Given the data in the question;

For the First Step;

CO₂(g) + 3H₂(g)  →  CH₃OH(l) + H₂O(l)                ΔH₁ = -131.kJ

For the First Step;

2CH₃OH(l)   →   CH₃OCH₃(g) + H₂O(l)                ΔH₂ = 8.kJ

Using Hess's Law of Constant Heat Summation;

" regardless of the multiple stages or steps of a reaction, the total enthalpy change for the reaction is the sum of all changes "

we multiply step 1 reaction by the coefficient of 2

2CO₂(g) + 2×3H₂(g)  →  2CH₃OH(l) + 2H₂O(l)                ΔH₁ = 2 × -131.kJ

we have

2CO₂(g) + 6H₂(g)  →  2CH₃OH(l) + 2H₂O(l)                ΔH₁ = -262 kJ

2CH₃OH(l)   →   CH₃OCH₃(g) + H₂O(l)                       ΔH₂ = 8 kJ

{ 2CH₃OH cancels 2CH₃OH }

Hence, we have;

2CO₂ + 6H₂  →  CH₃OCH₃(g) + 3H₂O(l)

So According to Hess's Law;

ΔH[tex]_{sum[/tex] = ΔH₁ + ΔH₂

we substitute

ΔH[tex]_{sum[/tex] = -262 kJ + 8 kJ

ΔH[tex]_{sum[/tex] = -254 kJ

Therefore, the net change in enthalpy for the formation of one mole of dimethyl ether is -254 kJ

Answer:

See explanation

Explanation:

A redox reaction equation shows a gain/loss of electrons from left to right in a reaction. In a redox reaction, a specie looses electrons while another specie gains electrons.

Considering the equation; 2Al(s) + 3Cu(NO3)2(aq) -----> 3Cu(s) + 2Al(NO3)3(aq)

The oxidation state of Al reactant is zero since the oxidation state of all uncombined elements is zero. The oxidation state of All in the product is +3

The oxidation state of the copper in the reactant is +2. The oxidation state of copper in the product is zero.

The oxidation state of N in the reactant and product is +5.

The oxidation state of oxygen in the reactant and product is (-2).

This is a redox reaction because from left to right, Al was oxidized (oxidation number increased from zero to +3) while Cu was reduced (oxidation number decreased from +2 to zero).

Explanation:

here's the answer to your question

Answer:

I say the last option

Explanation:

I hope this help let me know if you have any questions

Answer:

0.886 J/g.°C

Explanation:

Step 1: Calculate the heat absorbed by the water

We will use the following expression

Q = c × m × ΔT

where,

Q(water) = c(water) × m(water) × ΔT(water)

Q(water) = 4.184 J/g.°C × 50.0 g × (34.4 °C - 25.36 °C) = 1.89 × 10³ J

According to the law of conservation of energy, the sum of the energy lost by the solid and the energy absorbed by the water is zero.

Q(water) + Q(solid) = 0

Q(solid) = -Q(water) =  -1.89 × 10³ J

Step 2: Calculate the specific heat capacity of the solid

We will use the following expression.

Q(solid) = c(solid) × m(solid) × ΔT(solid)

c(solid) = Q(solid) / m(solid) × ΔT(solid)

c(solid) = (-1.89 × 10³ J) / 32.53 g × (34.4 °C - 100. °C) = 0.886 J/g.°C

Answer:

[tex]error = 4.0 - 3.5 = 0.5 \\ \\ percent \: error = \frac{0.5}{3.5} \times 100 \\ \\ = 14.29\% [/tex]

Answer:

x= 300m , 38s

answer is 7.9

Answer:

speed=distance/time

Explanation:

speed=300/38

=7.8947368421

to the nearest tenth=7.9

Answer:

a) 4p ⇒ 4s  transition is Allowed

b) 3d ⇒ 4s transition not allowed

Explanation:

a) 4p ⇒ 4s  transition

This transition is allowed because for a 4p state; l = 1 and for a 4s state I = 0

hence Δl = 1 - 0 = 1

Energy of 4p ( Ei ) = 3.75eV

Energy of 4s ( E2 ) = 3.19 eV

where : λ = 1240 eV nm / ( E₂ - E₁ )

                = 2214 nm ≈ 2.214 μm

b) 3d ⇒ 4s transition

This transition is not allowed  

a 3d state , l = 2 while for 4s state l = 0

hence Δl = 2 - 0 = 2

therefore the transition is not allowed

Answer:

all cells are produced from other preexisting cells through cell division

Answer:

a) E2

b) SN2

c) SN2

Explanation:

A substitution reaction involves replacement of an atom or group in a molecule by another atom or group. An elimination reaction is the loss of two atoms from the same molecule leading to the formation of a multiple bond in the molecule.

We must note that primary alkyl halides never undergo SN1/E1 reactions. However, the presence of a strong bulky base such as tert BuO- , E2 reactions predominate. In the presence of strong bases such as OH^- and good nucleophiles such as I^-, SN2 mechanism predominates.