Answer:
The time required to finish the maze
The time required to finish the maze is the outcome variable of this experiment.
WHAT IS AN OUTCOME VARIABLE?
An outcome variable, also known as dependent variable or response variable, is the variable that the experimenter measures or records in the experiment. The outcome variable responds to changes made to the independent variable, hence, the outcome variable is dependent on the independent variable.In this question, a student conducts an experiment to determine the time it will take her pet rabbit to make it through a maze to a carrot.
She records the time it took the rabbit to finish the maze for each of the test. Hence, the outcome variable in this experiment is the time required for the rabbit to finish the maze.Learn more: https://brainly.com/question/19016612
A team of researchers is working on a project to make a new kind of carbonless fuel. During their experiment, there is an explosion tha
the lab. While they are cleaning the debris, they discover three pieces of frozen metal. The researchers were excited to report that they
discovered a fuel that burns so clean it becomes cold. Which statement best explains why this scenario represents "bad" science?
The frozen metal was discovered through biased research practices.
The clean fuel experiment lacks controlled variables due to the explosion.
The experiment is replicable because the testing conditions are included.
The result of clean fuel production, the frozen metal, is not observable.
The correct answer is; "The frozen metal was discovered through biased research practices."
Scientific research is based on standard practices and not on personal bias hence they should not have taken a decision based on the frozen metals. Bias prevents a researcher from taking an objective look at experimental observations before arriving at a conclusion.
The greatest pitfall that must be avoided when conducting a scientific study is bias.
A bias is introduced when there is a disparity between observation and interpretation of data in a scientific study.
In the case of this question, the researchers already wanted to establish the possibility of obtaining a carbonless fuel. Their minds were so clouded with this bias that they forgot to thoroughly investigate the pieces of frozen metal thereby arriving at a lobe-sided, unscientific conclusion. This makes their work, "bad" science.
For more about bias in research, see:
https://brainly.com/question/15160493
Answer:
it would be A The conditions of the experiment are not replicate able or repeatable.
Explanation:
A team of researchers is working on a project to make a new kind of carbonless fuel. During their experiment, there is an explosion that destroys the lab. While they are cleaning the debris, they discover three pieces of frozen metal. The researchers were excited to report that they had discovered a fuel that burns so clean it becomes cold. Other scientists attempt to make the carbonless fuel but are unsuccessful. Which statement best explains why this scenario represents "bad" science?
The conditions of the experiment are not replicable or repeatable.
The process of making clean fuel is known due to the explosion.
The frozen metal was discovered through biased research practices.
The result of clean fuel production, the frozen metal, is not observable.
Determine the kinds of intermolecular forces that are present in each of the following. Part A Xe Check all that apply. dispersion forces dipole-dipole forces hydrogen bonding Request Answer Part B N2 Check all that apply. dispersion forces dipole-dipole forces hydrogen bonding Request Answer Part C CO Check all that apply. dispersion forces dipole-dipole forces hydrogen bonding Request Answer Part D HF Check all that apply. dispersion forces dipole-dipole forces hydrogen bonding
Answer:
Part A
dispersion forces
Part B
dispersion forces
Part C
dispersion forces
dipole-dipole forces
Part D
dispersion forces
dipole-dipole forces
hydrogen bonding
Explanation:
Dispersion forces occur in all molecules. They result from momentary shifts in the electron cloud of molecules which induces a dipole in another molecule. This induced dipole eventually spreads throughout the molecule.
For Xe which is a noble gas and N2 which is a diatomic molecule, dispersion forces is the only kind of intermolecular force present in the molecule.
CO is a polar molecule hence in addition to dispersion forces, dipole-dipole forces also exist in the molecule.
HF is a polar molecule hence it possesses dipole-dipole forces in addition to dispersion forces. In this molecule, hydrogen is bonded to a highly electronegative atom (fluorine). Hence, hydrogen bonding is a dominant intermolecular interaction in the molecule.
which of the following is indicated by the ph value of a solution?
a- it's hydrogen ion concentration
b- its ammonium ion concentration
c- ability to undergo chemical reaction
d- its ratio of solute amount to solvent volume
Answer:
c- ability to undergo chemical reaction
Calculate the volume of a 89.51 g sample of carbon dioxide at 281.8 K and 843.9 torr. Round your answer
to the nearest L. Do not include units.
Answer:
1,000.000
Explanation:
Name the following alkane molecule:
Br
CI
A. 6-bromo-2-chlorodecane
B. 2-chloro-6-bromodecane
C. 5-bromo-9-chlorodecane
Answer:
6- bromo- 2-chlorodecane
The name of molecule is 6- bromo- 2-chlorodecane.
What is 6- bromo- 2-chlorodecane?
It is organic molecule. There are 10 carbon present in this molecule. The bromine atom is attached with C-6 carbon where chlorine is attached with C-2 carbon.
What is molecule?A molecule is a collection of more than one atom bound together by chemical bonds; depending on the context, the phrase may or may not include ions that meet this requirement.
Therefore, the name of the given molecule will be 6- bromo- 2-chlorodecane
To know more about molecule and 6- bromo- 2-chlorodecane.
https://brainly.com/question/19922822
#SPJ2
What is the difference between the chemical formula of water and carbon dioxide?
The chemical formula of water is H2O, and the chemical formula of carbon dioxide is CO2. This means that water has 2 atoms of hydrogen and 1 atom of oxygen, which carbon dioxide has 1 atom of carbon and 2 atoms of oxygen. The only similar atom that the two molecules have in common is oxygen. CO2 has one more atom of oxygen than H2O. Hope this helps!
H2O is water. CO2 is CD.
Where do reactions in a solid generally take place?
A. At the center of the solid.
B. All throughout the solid
C. Only on opposite sides of the solid due to repelling forces.
D. On the surface of the solid.
Answer:
It's D. On the surface of the solid.
Explanation:
If the reactant is a solid, the surface area of the solid will impact how fast the reaction goes. This is because the two types of molecule can only bump into each other at the liquid solid interface, i.e. on the surface of the solid. So the larger the surface area of the solid, the faster the reaction will be.
A base which can be used to relieve indigestion
Explanation:
Antacids are medications used to manage the symptoms of indigestion and heartburn. Antacids contain active ingredients that are bases. These allow antacids to neutralize any stomach acid which could be causing digestive discomfort.
What is an example of an extensive property
what is the zeff of carbon ??????
plz bata do
Answer : La carga nuclear efectiva (Zef) es la carga positiva neta experimentada por un electrón en un átomo polielectrónico. El término "efectiva" se usa porque el efecto pantalla de los electrones más cercanos al núcleo evita que los electrones en orbitales superiores experimenten la carga nuclear completa
Explanation:
What is the correct IUPAC name for Ir(NO₂)₄
Answer
Iridium(IV)Nitrite
The correct IUPAC name of the Ir(NO₂)₄ compound is Iridium(IV)Nitrite.
What is the IUPAC name?Whether it's in a continuous chain or just a ring, the largest chain of carbons joined by a single bond serves as the basis for IUPAC nomenclature.
What is a compound?
A chemical compound would seem to be a substance that contains numerous similar molecules made of atoms from different elements joined by chemical bonds.
The given compound is Ir(NO₂)₄. It can be seen that 4 nitro group is attached with Ir and its coordination number is 4. Hence, the IUPAC name will be Iridium(IV)Nitrite.
To know more about IUPAC nomenclature.
https://brainly.com/question/16631447
#SPJ2
a fixed amount of gas at 25.0 degrees Celsius occupies a volume of 10.0 L when the pressure is 629 torr. Use Charles law to calculate the volume the gas will occupy when the temperature is increased to 105 degrees Celsius while maintaining the pressure at 629 torr?
Explanation:
Since pressure remained constant, we can eliminate P from the equation
[tex] \frac{pv }{t} = \frac{pv}{t} [/tex]
Doing some algebra and converting temperature to Kevin by adding 273, you should obtain the same result.
what is ethylene oxcide used for?
soaking of instruments
steam autoclave
cold sterilization
gas autoclave
Answer:
Ethylene oxide, also known as C2H4O, is commonly used for sterilizing things, particularly medical equipment. Cold sterilization is a form of sterilization, so, "cold sterilization" is correct.
Let me know if this helps!
Answer: Ethylene oxcide is used for cold sterilization
Explanation:
Stibnite, Sb2S3, is a dark gray mineral from which antimony metal is obtained. What is the mass percent of antimony in the sulfide? If you have 1.00 kg of an ore that contains 10.6% antimony, what mass of Sb2S3 (in grams) is in the ore?
Answer:
duw8 Wert gsi
Explanation:
pues pues y 8y1rcuecisscfjfj3eoeu xv cihskdkkd HD jekifeuifkeñ elijo eh fh FC eh SSH DJ djdvheshdhs
The mass percent of antimony in the sulfide is 71.7% and the mass of Sb2S3 is 0.148 g.
What is mass percent?Mass percent is defined as a way of expressing a concentration or describing a component in a particular mixture.
To calculate the mass percent of an element in a compound, divide the mass of the element in 1 mole of the compound by the molar mass of the compound and multiply the result by 100.
Mass percent = Mass of chemical / Total mass of compound x 100
Mass of ore = 10 kg
% antimony in ore = 10.6%
= 10.6 / 100 = 0.106 g
Mass of antimony = 0.106 g
Mass percent = Mass of antimony / Mass of stibnite x 100
71.7% = 0.106 / X x 100
X = 0.106 x 1000 / 71.7 x 1000
= 106 / 717 = 0.148 g
Thus, the mass percent of antimony in the sulfide is 71.7% and the mass of Sb2S3 is 0.148 g.
To learn more about mass percent, refer to the link below:
https://brainly.com/question/5840377
#SPJ2
You are
working with a combustible material. Which piece of safety
equipment is most important to have on hand?
PLEASE HELP ASAP!!!
Answer:
I don't know What can I do.
HELP ASAS 15 POINTS
When using the process of evaporation to separate a mixture, what is left behind in the evaporating dish?
A. None of these.
B. The liquid evaporates and the solid is left in the dish.
C. The mixture does not separate, and the entire mixture evaporates.
D. The mixture does not separate, and the entire mixture remains in the dish.
Answer:
liquid will be evaporated while solid remains
Consider the reaction: NaNO3(s) + H2SO4(l) NaHSO4(s) + HNO3(g) ΔH° = 21.2 kJ
How much heat must absorbed by the reaction system to convert 100g of NaNO3 into NaHSO4(s)?
Answer:
endet nach selam nw
4gh7
Compare the modern (electron cloud) model of the atom with Bohr’s atomic model. Which of these statements describe the two models correctly? Check all of the boxes that apply.
A. Bohr’s model was replaced only because of its age.
B. Bohr’s model electrons cannot exist between orbits, but in the electron cloud model the location of the electrons cannot be predicted.
C. The modern model explains all available data about atoms; Bohr’s model does not.
D. The modern model is more widely accepted because it was proposed by more well known scientists.
Answer:
B. Bohr’s model electrons cannot exist between orbits, but in the electron cloud model, the location of the electrons cannot be predicted.
AND
C. The modern model explains all available data about atoms; Bohr’s model does not.
Explanation:
The answers are right on Edge. :)
Answer:
b and c
Explanation:
my assignment was 100% 2022
H2+O=???????????????????
Answer:
H₂O
Explanation:
Two molecules of Hydrogen and one molecules of Oxygen, when mixed, create H₂O, or water. There is no scientific name for H₂O due to it's common name. It is just refereed to as "water" or H₂O.
instruments that have been soaking in cold sterilization for blank minutes are considered aseptic and can be used during non sterile procedures
a. 60
b. 30
c. 15
d. 10
Answer:
Its C you can check
What would be the name of this compound?
Answer:
2,3 Dimethyl hexane
Explanation:
First, start the count from which side is given the CH3 smallest number
first; the longest carbon chain in this compound is 6
and you don't have any double and triple bonds or functional groups so it is Hexane
you start to count from the right side to give the branch molecules the smallest number ..
CH3 = methyl
and you have 2 methyl in this compound ..
and 2 mean you must write ( Di )
you write the name in this way
2,3 Dimethyl hexane
hope this helps you.
stay safe ...
If you dissolve 0.1 mol of formic acid in 1 L of water, ther esulting solution contains 0.004 mol of H₃O+. Based on this information, is formic acid a strong acid, or is it a weak acid?
Please explain!
In an ideal case, the acid would completely protonate. such an acid would be a strong acid. Dissociation of Formic acid looks like:
HCOOH + H₂O → COOH⁻ + H₃O⁺
one mole of formic acid should give one mole of Hydronium(H₃O⁺) ions
similarly, 0.1 moles of formic acid should produce 0.1 moles of hydronium ions. but we know that it is not the case, a much lesser amount is actually formed.
Which means that Formic acid did not completely dissociate into COOH⁻ and H⁺ ions.
Hence, Formic Acid is a weak acid
We know
Any acid
Containing carbon is weak Containing no carbon is strongFormic acid stands for HCOOH
It contains C means dissociation is less .
The dissociation of H+ is less means acidity is less.
Weak acidWhat type of bonding is occuring in the compound below?
A. Covalent polar
B. Metallic
C. Ionic
D. Covalent nonpolar
Answer:
(B). it's metallic bonding
How long do spent fuel rods remain dangerously radioactive?
Answers
A.
The rods are no longer radioactive because the radioisotopes are used up.
B.
Spent fuel rods remain radioactive for several years after the fuel is exhausted.
C.
It takes tens of thousands of years for the radioisotopes in the rods to decay to safe levels.
D.
It is impossible to determine how long it will take for the radioisotopes to decay because they last too long.
Answer:
c
Explanation:
it takes 10,000 years to just reduce down the decay
What was Thomson's model of the atom called?
A. The oil-drop model
B. The photoelectric model
C. The plum-pudding model
D. The atomic theory model
Amphiphilic molecule: ___________
a. have both oxidizing and reducing groups.
b. are micelles.
c. have chromophores in two different wavelength regions.
d. have both acidic and basic groups.
e. have both hydrophilic and hydrophobic groups.
Which statement describes the number of protons in each atom of an element? (1 point)
The number of protons is given by the atomic number, which increases by one moving from
left to right across each row of the periodic table.
The number of protons is given by the mass number, which increases by one moving from left
to right across each row of the periodic table.
The number of protons is given by the atomic number, which increases by one moving down
in its column in the periodic table.
The number of protons is given by the mass number, which increases by one moving down in
its column in the periodic table.
By definition of atomic number, the correct answers are:
"The number of protons is given by the atomic number, which increases by one moving from left to right across each row of the periodic table." and "The number of protons is given by the atomic number, which increases by one moving down in its column in the periodic table."You have to know that atoms are made up of a nucleus made up of protons and neutrons, and a shell made up of electrons. Protons are positively charged, while neutrons are electrically neutral (that is, they have zero charge). Therefore the atomic nucleus always has a positive charge. On the other hand, electrons are negatively charged.
The atomic number is the total number of protons that make up the atomic nucleus of a given chemical element and is represented by the letter Z.
An atom is naturally neutral and has the same number of electrons and protons.
The atomic number is used to classify the elements within the periodic table of elements, going from the smallest to the largest number of protons in the nucleus as you progress through the rows and columns of the table. That is, as you travel a period (row) from left to right and as you travel a group (column) from top to bottom, the atomic number increases.
In summary, the correct answers are:
"The number of protons is given by the atomic number, which increases by one moving from left to right across each row of the periodic table." and "The number of protons is given by the atomic number, which increases by one moving down in its column in the periodic table."Learn more about the atomic number: https://brainly.com/question/1262368?referrer=searchResults
Answer:
The answer is "The number of protons is given by the atomic number, which increases by one moving from left to right across each row of the periodic table."
Explanation:
If you look at the periodic table, the elements atomic numbers increase from left to right by one. Therefore, the protons also increase by one from left to right because the number of protons in an element is the same as the atomic number.
Gluconolactone is a(n) _________________________, classified as a(n) _______________, that cyclizes to produce a(n) ___________________. C-1 oxidized derivative of glucose Ester of gluconic acid Aldonic acid
Answer:
gravity
Explanation:
The element europium exists in nature as two isotopes: has a mass of u and has a mass of u. The average atomic mass of europium is u. Calculate the relative abundance of the two europium isotopes.
Answer:
Problem Details
The element europium exists in nature as two isotopes: 151Eu has a mass of 150.9196 amu, and 153Eu has a mass of 152.9209 amu. The average atomic mass of europium is 151.96 amu. Calculate the relative abundance of the two europium isotopes.
answer:
151Eu = 48%, 153Eu = 52%
