All the paper clips, coiled wire with nail and wrapping or coiling the wire more times are the correct answers.
All the paper clips will the wire wrapped around the nail just a few times pick up. A coiled wire with nail in the center is the electromagnet design which is most successful in picking up the most paper clips. Wrapping or coiling the wire more times around the nail make the electromagnet more stronger.
If an iron nail that was much thicker was used, it will make the magnet stronger that leads to strong electromagnetism. There are three main parts that is necessary for making a motor i.e. a rotor, a stator and a commutator.
These three parts use the attractive and repulsive forces of electromagnetism, causing the motor to spin continually as long as it receives a steady flow of electric current. Motors comprise of loops of wire in a magnetic field.
When current is passed through the loops, the magnetic field exerts a torque on the loops, which rotates the shaft that leads to the generation of electricity. Water pump, mixer and washing machine are three appliances in your house that use a motor that turns electrical energy into mechanical energy.
https://brainly.com/question/24278437
Un cuerpo es saltado desde cierta altura , llegando al piso luego de 7 s. Determine de altura se le soltó . (g=10m/segundo al cuadrado )
Answer:
Maximum height, H = 35 meters
Explanation:
Given the following data;
Time = 7 seconds
Acceleration due to gravity, g = 10 m/s²
To find the maximum height;
Mathematically, the maximum height is given by the formula;
H = ½gt²
H = ½ * 10 * 7
H = 5 * 7
Maximum height, H = 35 meters
Answer:
am I the only one seeing blink
3.7 kg of a saturated water vapor at 0.4 MPa is isothermally cooled until it is a saturated liquid. Calculate the amount of heat rejected during this process in MJ. (Report your answer in 3 decimal places.)
Answer:
7.894 MJ
Explanation:
Given that:
The mass of the saturated water vapor = 3.7 kg
The pressure of the saturated water vapor = 0.4 MPa
From saturated properties of steam tables when the pressure is at 0.4 Mpa
The enthalpy in (kJ/kg);
hf = 604.7 kJ/kg
hg = 2738.1 kJ/kg
The rejected heat during this process is:
Q = m(hg - hf)
Q = 3.7(2738.1 - 604.7) kJ/kg
Q = 3.7(2133.4) kJ/kg
Q = 7893.58 kJ/kg
Q = 7.894 MJ
velocity of body in a circular path is variable why
Velocity is directly propertional to dusplacement.Displacement is the shortest dustance between any two points but in a circle dispalcement changes each time as direction is not constant.So, velocity of body in a circular path is variable......
When n resistance each of value x are connected parallel then resultant resistance x. When these n resistor connected in series. Total resistance
Answer:
Explanation:
Suppose you have 3 resistors each with a value of 3. If you placed them in parallel, would you get 3
1/3 + 1/3 + 1/3 = 1/r
The denominator doesn't change. So add the numerators.
(1 + 1 + 1)/3 = 3/3 = 1
So the question is faulty.
1 = 1/r
1*r = 1
r = 1/1
r = 1
If if two non zero vectors are acted on a body in what condition the resultant vector on the body will be zero ?
Answer:
Yes, when the 2 vectors are same in magnitude and direction. Yes, when the 2 vectors are same in magnitude but opposite in sense. Yes, when the 2 vectors are same in magnitude making an angle of 2π3 with each other.
Explanation:
Hope it helps you
The condition under which the resultant of two vectors will be zero is that the vectors must be in equilibrium.
The conditions under which the resultant of two non zero vectors acting on a body must be zero.
the two vectors must be in equilibriumthe two vectors are forces, then they must lie on the same plane and their line of action must pass through a common point.[tex]\bar R = \bar R_A + \bar R_B = 0[/tex]
Thus, the condition under which the resultant of two vectors will be zero is that the vectors must be in equilibrium.
Learn more here: https://brainly.com/question/17574217
Solar energy is a clean, renewable energy source. It is expensive to build a solar plant, but there is no fuel cost only maintenance. Why does solar energy not play a bigger role in energy production today?
Answer:
Energy production requires the setting up of a complete interconnected chain from generation of energy from the root source of the energy to the storage of the generated energy and the eventual utilization of the energy when required
Solar energy, indirectly, continues to be the main source of energy, however, the direct use of solar energy to power the systems we use in our everyday life, require the development of technologies, such as high efficiency solar cells, means of energy storage, and compatible efficient energy usage which are industrial areas that are seeing good progress but in which the current developed equipment are expensive to produce, and due to their efficiency, are undergoing further research and development
Therefore, due to the continuous increasing improvement in solar technology which can observed, the use of the produced energy through solar is evolving, and therefore, will continue to play a continuously increasing but lower role compared to other sources of energy which have been developed to satisfactory level that can drive an industry, considering the financial investment involved
Explanation:
Object A has a mass of 5 kg and a velocity of 6 m/s to the east while Object 1 point B has a mass of 12 kg and velocity 0.6 m/s also to the east. What is the momentum of the system? (Let east be positive)
help plss I got family
Answer:
Momentum of system = 37.2 Kgm/s.
Explanation:
Given the following data;
Mass A = 5 kgVelocity A = 6 m/sMass B = 12 kgVelocity B = 0.6 m/sTo find the momentum of the system;
Momentum can be defined as the multiplication (product) of the mass possessed by an object and its velocity. Momentum is considered to be a vector quantity because it has both magnitude and direction.
Mathematically, momentum is given by the formula;
Momentum = mass * velocity
For object A;
Momentum A = 5 * 6
Momentum A = 30 Kgm/s
For object B;
Momentum B = 12 * 0.6
Momentum B = 7.2 Kgm/s
Next, we would determine the momentum of this system using the formula;
Momentum of system = Momentum A + Momentum B
Substituting the values into the formula, we have;
Momentum of system = 30 + 7.2
Momentum of system = 37.2 Kgm/s.
A converging lens of focal length 20cm, forms a real image twice the size of the object. Calculate:
i) the power of the lens;
ii) the position of the image.
Answer:
Solition given:
focal length(f)=20cm
size of image(v)=2x
size of object(u)=x
we have
power of lens= reciprocal to focal length=1/20=0.05/cm
ii.
the position of the image is beyond C.
Explanation:
See the attachment !!!!!!!
Two forces of equal magnitude F
have a resultant of the same
magnitude F. The angle between the
two forces is
45°
120°
O 60°
O 35°
Answer:
the ans is 120 degree hope it will help
Ра:
5. Mass of the earth is 6x10-kg and its radius is 6400km. What is the
mass of a man weighting 977N?
(99.99kg)
ma
Orth
be
Answer:
what do u need help with
Explanation:
Pа: 5. Mass of the earth is 6x10-kg and its radius is 6400km. What is the mass of a man weighting 977N? (99.99kg) ma. Orth be.
A railroad car (with a mass of 3250 kg) moves at 8.1 m/s . It collides with and couples to another car that was initially at rest. After the collision, the two cars move together at a speed of 4.50 m/s. What is the mass of the second car?
Answer:
m_2 = 2600kg
Explanation:
P_1 = P_2
P = (m_1)*(v_1)+(m_2)(v_2)
P_1 = (3250kg)(8.1m/s)+(m_2)(0m/s)
P_1 = 26,325 kg*m/s
P_2 = (3250kg)(4.5m/s)+(m_2)(4.5m/s)
P_2 = 14,625kg*m/s+(4.5m/s)m_2
26,325 kg*m/s = 14,625kg*m/s+(4.5m/s)m_2
11,700kg*m/s = (4.5m/s)m_2
m_2 = 2600kg
Which of the following is true of highly conductive elements?
Answer:
A
Explanation:
i think a is the answer because if you take an example of group 1 and 2 metals on the periodic table you will notice that they are highly reactive but they have a few electrons in their outer most shells.
I hope this helps
why can't we measure temperature or build thermometer if there is no zeroth law? thanks
Explanation:
The Zeroth Law of Thermodynamics states that if two bodies are each in ... to heat, there will be no transfer of heat from one to the other.
State any ten reasons why students in Uganda need to study physics?use examples of the possible technological advancements which can be made using the knowledge of physics
Answer:
1.it also hleps us to became doctors becuase without physics you can't be a doctor
2.physics needs to be steady whether you like it or not it helps you in life so everybody must study physics no matter is in Uganda USA and plenty more countries there must be physics to dare to be studied
If the wave is detected 12.5 minutes after the earthquake, estimate the distance from the detector to the site of the quake
Answer:
Remember the relation:
Speed*Time = Distance.
We can estimate that the speed at which an earthquake "moves", in the surface, is:
S = 6km/s (this is a low estimation actually)
Then if the wave is detected 12.5 minutes after the earthquake, we know that it traveled for 12.5 minutes before reaching the detector.
So we know the speed of the wave and the time it took to reach the detector, then we can use the equation:
Speed*Time = Distance.
to find the distance.
First, we should write the time in seconds
we know that:
1 min = 60 s
then:
12.5 min = 12.5*(60 s) = 750 s
Then, the wave traveled with a speed of 6 km/s for 750 seconds until it reached the detector, then the distance that it traveled is:
(6km/s)*750s = 4500 km
The distance between the detector and the site of the quake is around 4500 km.
10. Explain the principle of electric motor. Write its uses.
Explanation:
The principle of an electric motor is based on the current carrying conductor which produces magnetic field around it. A current carrying conductor is placed perpendicular to the magnetic field so that it experiences a force.
The largest electric motors are used for ship propulsion, pipeline compression and pumped-storage applications with ratings reaching 100 megawatts. Electric motors are found in industrial fans, blowers and pumps, machine tools, household appliances, power tools and disk drives.
How do you format short quotations in an MLA-style document?
Answer:
To indicate short quotations (four typed lines or fewer of prose or three lines of verse) in your text, enclose the quotation within double quotation marks.
If the force on a spring is 2 N and it stretched 0.5 m, what is the spring constant?
O A. 2 N/m
OB. 0.2 N/m
OC. 0.4 N/m
OD. 4 N/m
answer is
0.4n/mSuppose the charged sphere is made from a conductor, rather than an insulator. Do you expect the magnitude of the force between the point charge and the conducting sphere to be greater than, less than, or equal to the force between the point charge and an insulating sphere
Answer:
* Point charge outside the radius of the sphere r> R, the force in the two systems is the same
* Point charge inside the sphere r <R, therefore the force in the system with the insulating sphere is greater
Explanation:
To answer this question let's use the relation
F = q E
with q being the point charge and E the electric field created by the sphere.
If we use Gauss's law
The electric field flux is proportional to the wax charge within the surface.
Let's analyze our situation.
* Point charge outside the radius of the sphere
r> R
where R is the radius of the sphere and r the distance from the center of the sphere to the point charge
in this case the waxed charge for the insulating and conducting sphere is the same, therefore the force in the two systems is the same
* Point charge inside the sphere
r <R
conductive sphere.
As the charges are mobile, they are located on the surface of the sphere and there is no waxed charge within a Gaussian surface that passes through the point charge, therefore the electric field is zero and consequently the force
F = 0
insulating sphere
Charges cannot move therefore there is a fraction of charge within a surface that passes through the point charge, consequently the electric field is different from zero
Fe> 0
for this second position the force on the conducting sphere is zero
therefore the force in the system with the insulating sphere is greater
Angie walked a distance of 90 meters east in 70 seconds. What was her
velocity?
A. 0.78 m/s east
B. 1.3 m/s east
O C. 7 m/s east
D. 9 m/s east
Enlight the contribution of science and technology for current pandemic of Corona virus??
The vaccine ofcourse. They helped in making the vaccine.
Generators?
A)take motion and induce a current
B)take motion and produce a magnetic field
C)take a current produce spin
D)take a magnetic field and produce spin
Answer:
A)take motion and induce a current
Explanation:
i hope it will be helpful
1) The position of an object to the north of a flagpole is given by x(t) = bt2 – c , where b and c are constants.
a) What is v(t), the velocity of the object as a function of time?
b) What is a(t), the acceleration of the object as a function of time?
c) At some time t the object is located at the flagpole. What is the velocity of the
object at that instant?
Answer:
a) The velocity of the object as a function of time, v(t) is 2·b·t
b) The acceleration of the function of time, a(t) is 2·b
c) The time at which the object is at the flagpole is t = √(c/b)
Explanation:
The function that gives the position of the object north of the flagpole, x(t) is presented as follows;
x(t) = b·t² - c (b and c are constants)
a) The velocity of the object as a function of time, v(t), is derived as follows
v(t) = x'(t) = d(b·t² - c)/dt = 2·b·t
The velocity of the object as a function of time, v(t) = 2·b·t
b) The acceleration of the function of time, a(t) = v'(t) = d(2·b·t)/dt = 2·b
c) The time at which the object is at the flagpole is given by the x-intercept of the function, where x(t) = 0, as follows;
At the x-intercept, we have, x(t) = 0 and x(t) = b·t² - c
∴ 0 = b·t² - c, which gives
b·t² = c
t² = c/b
t = ±√(c/b), we reject the negative value to get;
The time at which the object is at the flagpole, t = √(c/b).
300 ml of a gas at 27°C is Cooled at -3°c at Constant pressure the final volume is plzz answer fast i will mark brainliest
Answer:V₁=300ml
T₁=27°C
V₂=?
T₂= -3°C
as we know
V₁T₁=V₂T₂
By putting values in formula
300ml×27°C=V₂×(-3°C)
300ml×27°C/-3°C=V₂
8100ml/-3=V₂
-2700ml=V₂
or V₂= -2700ml
why do black holes have a large gravitational pull that even light cannot escape from
Answer:
Because matter has been squeezed into a tiny space.
Explanation:
According to NASA, this can happen when a star is dying.
A black hole has no more gravity than the same amount of matter in any other form.
But remember that the gravitational forces are stronger as you get closer to the center of the body. The mass of a black hole is packed into such a small size (theoretically zero !) that you can get very close to its center. THAT'S where its gravity is hugely strong.
how much would a 70 kg mean weight on the Moon what should be its mass on the earth and on the moon
Answer:
I don't know sorry' please
A 250–g piece of gold is at 19 °C. 5.192 kJ of energy is added to it by heat. The specific heat of gold is 129 J/(kg·°C). Calculate its final temperature.
We heat a 25–g sample of metal from 10 °C to 100 °C. 1.082 kJ of energy is added to it by heat. Calculate
the specific heat of the metal.
Answer:
A. DT is given by Q= MCs DT
m = mass of the substances
Cs= is it's specific heat capacity
Ck= Q
Mk ×DTk
=250 × 9 × 5
129
=Dt = 180.1085271
answer is 180degree C.
Explanation:
B. = 25×10 ×100
1.082
=2500
1.082
= 23105.360 g/kj.
The final temperature is 180 degree. and the specific heat of the metal is 23105.360 g/kj.
How to calculate the specific heat?Q = m . C . ΔT
Q = heat; m = mass; C is the specific heat and
ΔT = Final T° - Initial T°
Q = C lat . m
Q = Heat
m = mass
C lar = Latent heat of fusion
A) DT is given by Q= M Cs DT
where, m = mass of the substances
Cs= is it's specific heat capacity
Ck= Q
Mk × DTk
=250 × 9 × 5
129 =Dt = 180.1085271
Thus, the final temperature is 180 degree.
B) We heat a 25–g sample of metal from 10 °C to 100 °C. 1.082 kJ of energy is added to it by heat = 25×10 ×100
=2500
1.082
Q = 23105.360 g/kj
Hence, the specific heat of the metal is 23105.360 g/kj.
Learn more about heat here;
https://brainly.com/question/12909121
#SPJ2
the value of 1.0004 to the power 1 by 2 using Binomial approximation is
Given:
The given value is [tex](1.0004)^{\frac{1}{2}}[/tex].
To find:
The value of the given expression by using the Binomial approximation.
Explanation:
We have,
[tex](1.0004)^{\frac{1}{2}}[/tex]
It can be written as:
[tex](1.0004)^{\frac{1}{2}}=(1+0.0004)^{\frac{1}{2}}[/tex]
[tex](1.0004)^{\frac{1}{2}}=1+\dfrac{1}{2}\times 0.0004[/tex] [tex][\because (1+x)^n=1+nx][/tex]
[tex](1.0004)^{\frac{1}{2}}=1+0.0002[/tex]
[tex](1.0004)^{\frac{1}{2}}=1.0002[/tex]
Therefore, the approximate value of the given expression is 1.0002.
why does apparent depth of different liquids vary
