#c
[tex]\\ \rm\hookrightarrow H_2PO_4^-+OH-\longrightarrow HPO_4^{2-}+H_2O[/tex]
H_2PO_4 is a base according to bronsted Lowry theory.So it loses a H+ and OH- takes that to form water#2
[tex]\\ \rm\hookrightarrow C_5H_5N+C_2H_4O_2\longrightarrow C_6H_6N^++C_2H_3O_2^-[/tex]
Pyridine is a bronsted base .So it forms pyridine cation by taking one H^+ from acetic acid1. What happens to global temperature averages that start an ice age?
Answer:
Around 46° F (7.8° C)
Explanation:
"Scientists have predicted that the global average temperature during the ice age was around 46 degrees Farenheit (7.8 degrees Celsius.) However, the polar regions were far colder, around 25 degrees Fahrenheit (14 degrees Celsius) colder than the global average."
Source: http://www.weforum.org
What 2 variables are needed to calculate the percent yield?
Answer:
isn’t it reactants and products?
Explanation:
Answer: reactants and products
Explanation:
Draw a relative energy diagram showing a conformational analysis of 2,2-dichloropropane along C1-C2 bond. Clearly label all staggered conformations and all eclipsed conformations with the corresponding Newman projections.
Answer:
^#))(899900000)My020
molecule that forms most of the material for the cell membrane
Answer:
Explanation:
lipids
Glycerophospholipids are by far the most abundant lipids in cell membranes. Like all lipids, they are insoluble in water, but their unique geometry causes them to aggregate into bilayers without any energy input.
Provide two real world examples of habitats and niches within ecosystems? Explain the interdependence that exists within those ecosystems.
Answer:
An ecosystem encompasses living organisms and the nonliving elements of their environments. Hence, the components of an ecosystem include animals, plants, microorganisms, rocks, soil, minerals, atmosphere, and the surrounding water masses. An ecosystem can be huge, cutting across several nations, or it can be relatively small, such as the body of an animal, which is home to numerous microorganisms.
We can describe ecosystems under two headings – natural ecosystems and unnatural ecosystems. Unnatural ecosystems, which include agricultural and urban areas, are greatly modified and maintained by human activity. Conversely, natural ecosystems are self-sufficient, balanced ecological units, with a high proportion of native biodiversity and minimal human disruption.
The natural ecosystem is broad. It is divided into two major groups – terrestrial and aquatic ecosystems. These are further divided into many other smaller types of ecosystems as outlined in this article.
Explanation:
Hope it helps.. if yes, plz mark me as brainliest
Nombre para la siguiente estructura de compuesto orgánico
Explanation:
Introducción:
La designación de los compuestos orgánicos puede hacerse utulizando alguno de los
siguientes sistemas:
a) Mediante nombres triviales o comunes, que expresen alguna propiedad característica
(sabor, color, acción fisiológica, etc.) o hagan referencia a la materia de la cual se extrajo el
compuesto.
b) Mediante nombres racionales que proporcionen una idea de su constitucion química y
destaquen sus analogías estructurales.
La necesidad de una nomenclatura sistemática, que expresara en forma clara, conforme
a normas precisas, el nombre y la estructura de los compuestos orgánicos, ha sido motivo de
preocupación permanente y observada a través de los numerosos congresos internacionales
que, al efecto, se han realizado en diversas oportunidades.
Las bases del actual sistema de nomenclatura fueron establecidas por una comisión que
se reunió en Ginebra en 1892. Posteriormente, fue perfeccionado y ampliado por el Comité de
Nomenclatura de la Unión Internacional de Química Pura y Aplicada, por lo que se conoce
como sistema I.U.P.A.C. (International Union of Pure and Applied Chemistry).
En las reglas aprobadas se ha tratado de introducir los menores cambios posibles a la
terminología universalmente adoptada. El sistema tiene la necesaria flexibilidad como para
adaptar la forma precisa de las palabras, de las terminaciones, etc. a las características de
distintos idiomas.
El nombre de los hidrocarburos consta de tres partes: a) la raíz, que indica el esqueleto
carbonado; b) la terminación o sufijo, que indica el grado de saturación, y c) el prefijo que
diferencia las distintas estructuras isoméricas (distintas estructuras construidas con exactamente
los mismos átomos).
Ej.: CH3-CH2-CH2-CH2-CH3 pentano (tambien llamado n-pentano)
penta: raíz que señala el número de átomos de carbono que componen la cadena principal
del compuesto.
-ano: sufijo que indica que el hidrocarburo es saturado
What is the mass of 7.2 moles of titanium to the nearest tenth?
Answer:
7.2 moles of titanium weigh 344.7 grams.
Explanation:
Molar mass of titanium = 47.88 g
[tex]1 \: mole \: of \: titanium = 47.88 \: grams \\ 7.2 \: moles \: of \: titanium = g[/tex]
solve for g
[tex]g = ( \frac{7.2 \times 47.88}{1} ) \\ g = 344.7 \: grams[/tex]
Answer:
[tex]\boxed {\boxed {\sf 344.7 \ g \ Ti}}[/tex]
Explanation:
We are asked to find the mass of 7.2 moles of titanium.
To convert from moles to grams, we use the molar mass. This value is the mass of 1 mole of a substance. They are equivalent to the atomic masses found on the Periodic Table, but the units are grams per moles instead of atomic mass units.
Look up titanium's molar mass on the Periodic Table.
Ti: 47.87 g/molConvert moles to grams using dimensional analysis. First, set up a ratio using the molar mass.
[tex]\frac {47.87 \ g \ Ti}{1 \ mol \ Ti}[/tex]
We are converting 7.2 moles to grams, so we multiply the ratio by this value.
[tex]7.2 \ mol \ Ti *\frac {47.87 \ g \ Ti}{1 \ mol \ Ti}[/tex]
The units of moles of titanium cancel.
[tex]7.2 *\frac {47.87 \ g \ Ti}{1 }[/tex]
The denominator of 1 can be ignored (a number over 1 is just the number).
[tex]7.2 *47.87 \ g \ Ti}[/tex]
[tex]344.664 \ g \ Ti[/tex]
We are asked to round to the nearest tenth. The 6 in the hundredth place tells us to round the 6 in the tenth place up to a 7.
[tex]344.7 \ g \ Ti[/tex]
There are approximately 344.7 grams of titanium in 7.2 moles of titanium.
Deduce the formula of calcium Phosphide.
Answer:
[tex]{ \sf{Ca _{3} P_{2} }}[/tex]
Calculate the percent error in the atomic weight if the mass of a Zn electrode increased by 0.3681g and 6.514x10-3 moles of Zn was produced. You may assume the molar mass of elemental zinc is 65.38 g/mol.
a. -13.5%
b. 13.52%
c. -13.52%
d. 13.5%
Answer:
13.5%
Explanation:
To answer this you need to understand that percentage error can never be negative as we use absolute value in the equation
To get molar/atomic mass = mass/moles
=0.3681g/(6.514×10^-3)moles
=56.509g/moles
percentage error = (65.38-56.509)/65.38 ×100
=13.56% (this is what I'm getting without rounding off your question wasn't specific on how many d.p to use)
The valves in the heart open and close to move blood in between heart chambers. O a) three directions O b) two directions O c) four directions d) one direction
Answer:
im not sure but i think its four directions
Hi,
The valves in the heart open and close to move blood in between heart chambers.
Answer:
d) one direction
What problem is associated with high stability of polymers?
Explanation:
they do not break down quickly or easily and create a lot of pollution (like microplastics)
What makes it possible
for a vascular plant to
be a long distance from
a water source?
A. long leaves
B. flowers
C. long roots
D. long stems
Answer:
I think long roots
Explanation:
Which is an example of genetic engineering?
A.
humans’ ability to digest cow milk
B.
some bacteria’s resistance to antibiotics
C.
golden rice enriched with vitamin A
D.
lizards with longer legs for surviving floods
Answer:
C. Golden rice enriched with vitamin A
Calculate the number of iron atoms contained in 434.52 g of iron: Question 7 options: 2.620 x 10 26 Fe atoms 5.769 x 10 24 Fe atoms 4.685 x 10 24 Fe atoms 3.223 x 10 25 Fe atoms 1.169 x 10 23 Fe atoms
Answer:
[tex]\boxed {\boxed {\sf 4.685 \times 10^{24} \ Fe \ atoms}}[/tex]
Explanation:
We are asked to convert grams of iron to atoms of iron.
1. Convert Grams to MolesFirst, we convert grams to moles. We use the molar mass or the mass in 1 mole of a substance. This is found on the Periodic Table because the molar mass is equal to the atomic mass, but the units are grams per mole instead of atomic mass units. Look up iron's molar mass.
Fe: 55.84 g/molWe convert using dimensional analysis, so we must set up a ratio using the molar mass.
[tex]\frac {55.84 \ g \ Fe}{ 1 \ mol \ Fe}[/tex]
We are converting 434.52 grams to moles, so we multiply by this value.
[tex]434.52 \ g \ Fe *\frac {55.84 \ g \ Fe}{ 1 \ mol \ Fe}[/tex]
Flip the ratio so the units of grams of iron cancel.
[tex]434.52 \ g \ Fe *\frac { 1 \ mol \ Fe}{55.84 \ g \ Fe}[/tex]
[tex]434.52 *\frac { 1 \ mol \ Fe}{55.84}[/tex]
[tex]\frac { 434.52}{55.84} \ mol \ Fe[/tex]
[tex]7.781518625 \ mol \ Fe[/tex]
2. Convert Moles to AtomsNext, we convert moles to atoms. We use Avogadro's Number or 6.02 ×10²³. It is the number of particles (atoms, molecules, formula units, etc) in 1 mole of a substance. For this problem, the particles are atoms of iron. We set up another ratio using this number.
[tex]\frac {6.02 \times 10^{23} \ atoms \ Fe }{ 1 \ mol \ Fe}[/tex]
Multiply by the number of moles we calculated.
[tex]7.781518625 \ mol \ Fe *\frac {6.02 \times 10^{23} \ atoms \ Fe }{ 1 \ mol \ Fe}[/tex]
The units of moles of iron cancel.
[tex]7.781518625 *\frac {6.02 \times 10^{23} \ atoms \ Fe }{ 1 }[/tex]
[tex]4.68447421 \times 10^{24} \ atoms \ Fe[/tex]
The correct answer choice is Choice 3: 4.685 × 10²⁴ atoms of iron.
Both formic acid and carbonic acid contain two hydrogen atoms. Why is the chemical formula of formic acid written HCHO₂ (with the two hydrogen atoms listed separately), while the chemical formula of carbonic acid is written H₂CO₃ (with the two hydrogen atoms written together)?
Please explain!
That is because one of the Hydrogens of Formic acid is a part of the functional group (COOH). so to make sure the reader understands that, they second H is written separately
The conversion of CICH=CHCI to CI2C=CC12 can be carried out with:
C12 / H20
C12
C12/ hv
C12 / aq. NaOH
Answer:
I think third C12/hv is right answer
Which of the following substances can be used to neutralize HF?
A: HF
B: SO2
C: HCI
D: NaOH
Answer:
option (D) NaOH is right answer
A neutralization reaction is "a reaction in which an acid and a base react to form water and a salt and involves H+ ions and OH- ions to produce water.
What is an acid?An acid is "any hydrogen-containing substance that is capable of donating a proton or hydrogen ion to another substance".
What is base?Base is "a substance that gets dissociated in an aqueous solution to form hydroxide ions OH-".
Hence, NaOH can be used to neutralize HF.
To learn more about Neutralization reaction here
https://brainly.com/question/24367029
#SPJ2
Spinocerebellar Ataxia
Help please due today
Answer:
It is a becaues i am a doctor and i know about that
Explanation:Just here to help
What is meant by functional group in an organic compound?
Functional group for
A) keton
B) acid anhydride
C) aldehyde
D) amide
C) alcohol
Answer:
i THINK the answer to this is C) aldehyde
Answer:
The answer is C, the guy above is correct.
Explanation:
(08.02 MC)
What is the molarity of a solution prepared by dissolving 20.0 grams of NaOH in sufficient water to make a solution with a
total volume of 2.40 liters? (5 points)
Select one:
a.0.120 M NaOH
6.0.208 M NaOH
c.0.416 M NaOH
O
d.0.833
Answer:
d. 0.208 M NaOH
Explanation:
M[NaOH] = 23+16+1= 40g/mol
2.40L = 2.4dm3
M=m/Mv
M=20.0g/40g/mol×2.4dm3
M=20.0g ÷ 96
M= 0.208 M NaOH
The statement of the molarity of a solution is "0.208 M NaOH."
What is molarity?The amount of a chemical substance in a defined volume of the solution is measured in molarity (M). The moles of a solute per litre of a solution is known as molarity. The molar concentration of a solution is also known as molarity.
In order to determine the molarity, initially calculate the number of moles of sodium hydroxide by dividing the given mass by molar mass of NaOH.
Gram to mole conversion factor,
Moles of NaOH
[tex]= (20.0\;g) * \frac{(1\;mol\;NaOH)}{(39.998\;g)} \\= 0.50\;mol[/tex]
Now, the molarity of the solution comes out to be,
[tex]Molarity = \frac{Moles\;of\;the\;solute}{Volume\;of\;the\;solution}[/tex]
So,
[tex]= \frac{0.0500 \;mol}{2.40\;L} \\= 0.208\;\frac{mol}{L} = 0.208\;M[/tex]
Hence the correct option is b.
Learn more bout molarity here
https://brainly.com/question/11386850
#SPJ2
22 SEE ** AL A large number of organic compounds have been discovered and isolated from natural sources by the first quarter of the 19th century but till then, none of the organic compounds could be prepared in the laboratory. It was believed that organic compounds followed laws of formation different from inorganic compounds and that some vital force was necessary to produce the organic compounds. Synthesis of these organic compounds in the lab was impossible due to the absence of vital force, which only known to exist in the living organisms. In 1828, Friedrich Wöhler produced the compound urea, H2N-CO-NH2 in the laboratory. Why was the result of this experiment significant in the history of Organic chemistry? (5 marks) Write equations showing the synthesis of urea from ammonium cyanate. (3 marks)
This reaction achieved by Friedrich Wöhler led to the birth of synthethic organic chemistry.
Prior to the successful synthesis of urea by Friedrich Wöhler in the year 1828, chemists believed that it is purely impossible to synthesize various organic substances in the laboratory owing to the absence of an imaginary "vital force". responsible for the formation of those substances.
However, the synthesis of urea by Friedrich Wöhler opened up the idea of laboratory organic synthesis which have blossomed into the present synthetic organic chemistry.
The equation for the synthesis of urea from ammonium cyanate is shown in the image attached.
Organic compounds which occur in nature could now be synthesized and studied under laboratory conditions.
Hence, this reaction achieved by Friedrich Wöhler led to the birth of synthethic organic chemistry.
https://brainly.com/question/13444532
g We've all blown up balloons. When you blow into a balloon, you are putting in more moles of gas. Let's say that on the second exhalation (blow) you blow in the exact same number of moles as you did with the first exhalation. So, you doubled the number of moles in the balloon. If the temperature and pressure remained constant, what is true about the volume of the gas in the balloon
According to ideal gas equation if the temperature and pressure remained constant, then the volume of the gas in balloon is fixed.
What is ideal gas equation?The equation of state for a fictitious perfect gas is known as the ideal gas law, sometimes known as the generic gas equation. Although it has some restrictions, it is a good approximation of the behavior of numerous gases under various circumstances. The sole interaction between molecules of an ideal gas would be an elastic collision when they collided or an elastic collision with the container walls.
The volume of a specific quantity of a gas is inversely proportional to its pressure at constant temperature. The following is a concise description of what is now known as Boyle's law: When held at a fixed temperature, the volume of a given quantity of gas is inversely proportional to the pressure at which it is measured.
Thus, according to ideal gas equation if the temperature and pressure remained constant, then the volume of the gas in balloon is fixed.
To learn more about ideal gas equation, refer to the link below:
https://brainly.com/question/28837405
#SPJ2
Identify the conjugate pairs in the following acid-base reaction
H₂CO₃(aq) + C₅H₅N(aq) HNO₃-(aq) + HC₅H₅N+(aq)
H2CO3 is an acid because it gave away a proton to become HNO3~.
HNO3~ is a conjugate Base because Acids become conjugate Bases after giving away a proton.
C5H5N is a base because it accepted the proton from H2CO3 to become HC5H5N+.
HC5H5N+ is a conjugate Acid because Bases become Conjugate Acids after accepting a proton.
What is the maximum most that can be extracted from 76 g og Cr2O3.
A) 36 g
B) 52 g
C) 104 g
D) 152 g
Answer:
D) 152 g
Explanation:
a mass of 1 mol Cr2O3 = 2 × 52 + 3 × 16 = 152 g number of moles of Cr2O3.
what are the properety of covalent bond
Explanation:
1. boiling and melting point
2. electrical conductivity
3. Bond strength
4. bond length
A covalent bond consists of negative electrons that are shared in between atoms. Because of this bond, they possess and manifest physical abilities, including electrical pressure/conductivity and lower melting points compared to ionic compounds.
A sample of gas is held at constant volume. If the number of moles of this sample of gas is doubled and the pressure of this sample of gas is halved, what happens to the absolute temperature of the gas?
Select one
a. The absolute temperature is doubled.
b. The absolute temperature is halved.
c. The absolute temperature is quadrupled.
d. The absolute temperature is quartered.
e. The absolute temperature stays the same.
Answer:
number of moles of gas increases the volume also increases.
What is the density of a solid that has a mass of 9.2 grams and a volume of 12.3 cm3 ? Would this object float or sink in water?
[tex]\boxed{\sf Density=\dfrac{Mass}{Volume}}[/tex]
[tex]\\ \sf\longmapsto Density=\dfrac{9.2}{12.3}[/tex]
[tex]\\ \sf\longmapsto Density=0.74g/cm^3[/tex]
Density of water =1g/cm^3It will float in water
công thức phân tử của glucozo
C₆H₁₂O₆ is the molecular formula of gulcozo.
Hello, I am a bit stuck on this. Could someone help?
