Answer:
option (D) NaOH is right answer
A neutralization reaction is "a reaction in which an acid and a base react to form water and a salt and involves H+ ions and OH- ions to produce water.
What is an acid?An acid is "any hydrogen-containing substance that is capable of donating a proton or hydrogen ion to another substance".
What is base?Base is "a substance that gets dissociated in an aqueous solution to form hydroxide ions OH-".
Hence, NaOH can be used to neutralize HF.
To learn more about Neutralization reaction here
https://brainly.com/question/24367029
#SPJ2
what surface phenomenon s
The special properties of surface layers, that is, the thin layers of a substance at the boundary of contiguous bodies, mediums, or phases. These properties result from the excess free energy of the surface layer and from the special features of the layer's structure and composition.
HOPE IT'S HELPFUL FOR U MATE...
Determine
the
number
of grams of C4H10
that
are
required
to
completely
react
to
produce 8.70 mol of CO2
according
to
the
following
combustion
reaction:
2 C₄H₁₀(g)
+
13 O₂(g)
→
8 CO₂(g)
+
10 H₂O(g)
Answer:
8 CO₂(g)
Explanation:
just took the exam
A couple coffee changes from a temperature of 75ﾟC to 12ﾟC what is the change in temperature in ﾟC
Explanation:
Answer
Open in answr app
The initial temperature of the coffee T0=100∘C.
The temperature of the room 15∘C.
Let T be the temperature at time t in minutes.
By Newton's law of cooling,
dtdTα(T−15)
∴dtdT=k(T−15)
⇒T−15dT=kdt
⇒∫T−15dT=∫kdt
⇒log(T−15)=kt+logc
⇒log(cT−15)=kt
⇒T−15=cekt
At t=0,T=100
We have 100−15=ce0⇒85=c
Thus we get T−15=85ekt.
When t=5minutes,T=60
⇒60−15=85e5k.
⇒e
Why is ice cold water rather than room temperature or warm water used to wash the remainder of the benzoic acid out of the beaker?
As a general rule:
"Solubility of compounds decrease with the increasing of temperature" as you can see in the graph.
Also, filtration, is a chemical process where you are separating a precipitate from a solution.
Now, if you want to recover benzoic acid from an aqueous solution, the better option would be with Ice cold water because its solubility will be lower because temperature is lower producing more precipitate.
Learn more about this process in:
https://brainly.com/question/14918321
equal volumes 50.0 ml of 0.54897 m solution of HCL and 0.9573 M NaOH solution have an initial temperature of 18.5 degrees Celsius react in a coffee cup calorimeter the resulted Solutions records a temperature of 22.9 degrees Celsius since the solutions are mostly water the solution are assumed to have a density of 1.0 g per ml and a specific heat of 4.184 joules per gram degree celsius the heat capacity of the Colorimeter is 1.0 x 10 to power 1 joules per degrees Celsius calculate the heat and gained or released by the solution at a constant pressure in J
Answer:
Explanation:
ok
1) What happens to the Mercury on a cool day in a thermometer??
Answer:
it's level goes down
Explanation:
because the temperature is low, so mercury level is down
Which one of the following compounds will be soluble in water?
A) AgCI
B) PbCO3
C) CaSO4
D) Cu(OH)2
E) LiCl
The compound that has been soluble in water will be LiCl. Thus option E is correct.
The compounds that form stable bonds in water and are easy to dissociate are soluble in water. Generally, ionic compounds are easily soluble in water.
AgCl:It has been an ionic compound, but the dissociation of AgCl will simultaneously form AgCl again making the compound insoluble in water.
[tex]\rm \bold{PbCO_3}[/tex]:It has been a covalent compound, thus it has been insoluble in water.
[tex]\rm \bold{CaSO_4}[/tex]:The compound is covalent in nature, thus it has been hard to dissociate in water.
[tex]\rm \bold{Cu(OH)_2}[/tex]:The copper in the compound has been hard to dissolve and precipitate in the solution.
LiCl:It has been an ionic compound and can be easily dissociated in the water.
Thus the compound that has been soluble in water will be LiCl. Thus option E is correct.
For more information about the soluble compounds, refer to the link:
https://brainly.com/question/1397002
s-Block compounds give a characteristic flame colour in the flame test. Based on this, can you give one use of s-block compounds?
Answer:
Lithium is used in making electrochemical cells.
What is the basic unit of chemistry?
O A. The bond
O B. The atom
O C. The sun
O D. The cell
Answer:
B. The atom
Explanation:
Cells are the most basic unit of structure and the smallest unit of matter is the atom.
Answer:
B. The atom
Explanation:
yeee it was right
The turbines in a hydroelectric plant are fed by water falling from a 50 m height. Assuming 91% efficiency for conversion of potential to electrical endrgy, and 8% loss of the resulting power in transmission, what is the mass flow rate of water required to power a 200 W light bulb?
From the information given;
the height of the water stream = 50 mthe efficiency of conversion from potential energy to electrical energy is 91%loss of power transmission = 8%To determine the mass flow rate, let's start by understanding some concepts and parameters.
The power is known to be the energy per unit of time. Mathematically, it can be written as:
[tex]\mathbf{Power = \dfrac{Energy}{Time}}[/tex]
[tex]\mathbf{P =\dfrac{E_p}{time}}[/tex]
[tex]\mathbf{P =\dfrac{m\times g\times z}{time}}[/tex]
where;
[tex]\mathbf{E_p}[/tex] is the potential energy of the streamm = mass flow rateg = acceleration under gravityz = heightThus;
[tex]\mathbf{E_p}[/tex] = m × 9.81 m/s² × 50 m
[tex]\mathbf{E_p}[/tex] = m × 490.5 (m²/s²)
Recall that:
The power P = 200 W, and;the conversion of the P.E = 91% = 0.91∴
[tex]\mathbf{E_p}[/tex] = 0.91 × 490.5m (m²/s²)
[tex]\mathbf{E_p}[/tex] = 446.355m (m²/s²)
Since the resulting power transmission is said to be 8%
Then;
the loss in the power transmission (P) = 100% - 8% × 446.355m (m²/s²)
the loss in the power transmission (P) = 92% × 446.355m (m²/s²)
the loss in the power transmission (P) = 0.92 × 446.355m (m²/s²)
the loss in the power transmission (P) = 410.65m (m²/s²)
Finally;
P = 410.65m (m²/s²)
[tex]\mathbf{P = 410.65 \times m (\dfrac{m^2}{s^2})}[/tex]
replacing the values, we have:
[tex]\mathbf{200 = 410.65 \times m (\dfrac{m^2}{s^2})}[/tex]
[tex]\mathbf{m = \dfrac{200 watt}{410.65\times (\dfrac{m^2}{s^2})}}[/tex]
[tex]\mathbf{m = \dfrac{200 \dfrac{J}{s}}{410.65\times (\dfrac{m^2}{s^2})}}[/tex]
since 1 J/s = 1 kgm²/s²)
Then:
[tex]\mathbf{m = \dfrac{200 \dfrac{\dfrac{kg\times m^2}{s^2}}{s}}{410.65\times (\dfrac{m^2}{s^2})}}[/tex]
[tex]\mathbf{m = \dfrac{200 \ {kg}}{410.65 \ s}}[/tex]
mass flow rate of the water (m) = 0.487 kg/s
Therefore, we can conclude that the mass flow rate of the water required to power a 200 W bulb light is 0.487 kg/s
Learn more about the hydroelectric plant here:
https://brainly.com/question/2635539?referrer=searchResults
HELP! How is the mass number of an atom calculated?
A - total number of electrons
B - total number of protons
C - protons plus neutrons
D - electrons plus neutrons
How many grams of magnesium chloride can be produced from 2.30 moles of chlorine gas reacting w excess magnesium Mg(s)+Cl2(g)->MgCl2(s)
The mass of magnesium chloride produced from 2.30 moles of chlorine gas is 218.99 grams.
How to calculate moles in stoichiometry?Stoichiometry refers to the study and calculation of quantitative (measurable) relationships of the reactants and products in chemical reactions.
According to this question, magnesium reacts with chlorine gas to form magnesium chloride as follows:
Mg + Cl₂ → MgCl₂
Based on the above chemical equation, 1 mole of chlorine gas forms 1 mole of magnesium chloride.
This means that 2.30 moles of chlorine gas will 2.30 moles of magnesium chloride.
Next, we convert moles of magnesium chloride to mass as follows:
molar mass of magnesium chloride = 95.211g/mol
mass of magnesium chloride = 95.211 × 2.30 = 218.99 grams.
Therefore, 218.99 grams of magnesium chloride will be formed.
Learn more about stoichiometry at: https://brainly.com/question/9743981
#SPJ1
You are working in a lab when radiation alarms go off. You are able to hide inside a steel cabinet, whose sides are about 1.5 inches thick, until the alarm goes off. Preliminary reports show that the radiation was weakly ionizing and negatively charged. Were you safe in the cabinet?
A. Yes, it was beta radiation and the steel was enough to block it.
B. Yes, it was alpha radiation and not harmful.
C. No, it was beta radiation and very dangerous.
D. No, it was gamma radiation and can only be blocked by a thick wall of lead.
Answer
A
Explanation:
Beta radiation is only very dangerous when it is ingested or if there is nothing in the way. The steel should protect you.
Yes, it was beta radiation and the steel was enough to block it. Hence, option A is correct.
What is beta radiation?Beta radiation is a current of electrons released at a rate exceeding the speed of light, with kinetic energy between 0.2 MeV and 3.2 MeV. Due to their lower mass which is approximately 5.5×[tex]10^{-4}[/tex] amu (9.130×[tex]10^(-24)[/tex], interactions between β-particles and the atoms of pass-through materials are much less frequent than the interactions between 5-007-particles: less than 200 ion pairs are typically formed in each centimetre of the air passage.
When we are working in a lab when radiation alarms go off and we are able to hide inside a steel cabinet, whose sides are about 1.5 inches thick, until the alarm goes off.
Preliminary reports show that the radiation was weakly ionizing and negatively charged. Yes, it was beta radiation and the steel was enough to block it.
Hence, option A is correct.
Learn more about beta radiation here:
https://brainly.com/question/16645044
#SPJ5
An individual was injected with 80 mg of inulin and 960,000 counts per min (cpm) of tritium-labeled water (3H20) to determine the volume of various body fluid compartments. After equilibration a blood sample was obtained and the plasma inulin concentration was 0.5 mg% and the plasma activity (concentration) of tritium was 20 cpm/ml. The volumes of which body compartments can be determined?
The measurement of body fluid compartments can be achieved by the dilution of chemical compounds that only circulate and disperse in the region of selected areas in the body. The dilution process is dependent on how the concentration is defined.
Given that:
the concentration of plasma insulin after equilibrium = 0.5 mg %∴
Concentration C = 0.5 mg/100
Concentration C = 0.005 mg/ml
The mass of insulin = 80 mgSince the mass amount of the chemical compound(i.e. insulin) and the concentration is known.
The volume of the body fluid compartment can be calculated as:
[tex]\mathbf{volume = \dfrac{\text{mass of the marker }}{concentration }}[/tex]
[tex]Volume = \dfrac{80 \ mg}{0.005 \ mg/ml}[/tex]
Volume = 16000 ml
Thus, it is known that insulin is generally utilized for the measurement of the extracellular fluid volume and serves as a cell impermeant marker.
As a result;
The volume of the extracellular fluid compartment is 16000 ml.
However, the tritium-labeled water is a good marker for the entire body fluid compartment due to the fact that:
its diffusion occurs throughout the entire body,it is identical to water and;the equilibrium concentration is typically easy to measure due to the radioactive characteristics of tritium.Given that:
plasma activity of tritium = 20 cpm/ml
i.e.
In 1 ml of plasma, 20 cpm of tritium is present.
As such, in 960,000 counts per min (cpm) of tritium-labeled water, the volume of the whole body compartment is:
[tex]\mathbf{= \dfrac{960000}{20} ml \plasma}[/tex]
= 48000 ml of plasma
Therefore, we can conclude that the volumes of the body compartment that can be determined are:
The volume of the extracellular fluid compartment, which is 16000 ml.The volume of the whole body compartment, which is 48000 mlLearn more about body fluid compartments here:
https://brainly.com/question/6791522?referrer=searchResults
Consider the following reaction:
Cr(NO3)3 (aq) + 2NaF (aq) --> 3NaNO3 (aq) + CrF3 (s)
If 21.0 grams of NaF are needed to precipitate all of the Cr+3 ions present in 0.125L of a solution of Cr(NO3)3, what is the molarity of the Cr(NO3)3 solution?
Your answer should be to 2 decimal places.
Answer:
2.01
Explanation:
First, let's convert grams to moles
(Na) 22.99 + (F) 18.998 = 41.988
Every mole of NaF is 41.988 grams
21/41.988 = 0.500143 moles of NaF
For every Cr+3, we will need 2 NaF, so Cr+3 will be half of NaF
0.500143/2 = 0.250071
molarity = moles/liters
0.250071/0.125 = 2.0057 M
Read the following statement:
Energy cannot be created or destroyed.
Does the statement describe a scientific law? (3 points)
a
No, because it universally applies to all objects
b
No, because it is not true in all circumstances
c
Yes, because it universally applies to all objects
d
Yes, because it is not true in all circumstances
Answer:
C. yes, because it is universally applies to all objects
1. Draw the condensed structural formula of sodium benzoate showing all charges, atoms including any lone pairs in the side chain functional group, and all sigma and pi bonds.
2. Draw the condensed structural formula of benzoic acid showing all atoms including any lone pairs in the side chain functional group, and all sigma and pi bonds. Indicate the acidic hydrogen.
3. Draw the condensed structural formula of tetrahydrofuran (THF) showing all heteroatoms plus their lone pairs and all sigma and pi bonds.
The structures are shown in the image attached.
A structural formula is the representation of the molecule in which all atoms and bonds in the molecule are shown.
Since the question requires that all the lone pairs, formal charges and sigma and pi bonds should be shown, then the simple condensed structural formula becomes insufficient in this case.
I have attached images of the structural formula of sodium benzoate (image 1), benzoic acid (image 2) and tetrahydrofuran (image 3).
All the formal charges, lone pairs as well as sigma and pi bonds are fully shown.
https://brainly.com/question/9988658
Glucose is soluble in water. Why is cellulose, which is made up of glucose, insoluble in water?
.....................
Cellulose is insoluble in water which is made up of glucose because it possesses high inter and intramolecular hydrogen bonding between the hydroxyl groups of the neighboring chains.
What is the function of cellulose?Due to being insoluble in nature, it serves as the fundamental component of the cell membrane in the plant. This is why the cell wall of plant cells are made of cellulose.
The chains of the cellulose are strongly bonded to each other. So, it is very difficult for the molecules of water to rupture or destruct these bonds between the chains. It is a hydrogen bond cross-linked polymer and more complex than glucose.
Therefore, due to high inter and intramolecular hydrogen bonding between the hydroxyl groups of the neighboring chains, cellulose is insoluble in water.
To learn more about Cellulose, refer to the link:
https://brainly.com/question/1768072
#SPJ2
Lead of mass 0.75kg is heated from 21°c to its melting point and continues to be heated unit it has all melted. Calculate how much energy is supplied to the lead. [Melting point of lead 372.5°c specific latent heat of fusion of lead = 23000 Jkg 'k ']
Answer:
65.5J
Explanation:
ML=Q
ML=MC(change in temperature)
0.75 X 23000 =0.75 X 351 X C
C= 65.5J
The energy supplied to the lead to melt from 21°c to its melting point is 51521 Joules.
What is the specific heat capacity?Specific heat is the amount of heat energy supplied to change the temperature of one unit mass of a substance by 1 °C. The SI unit of the specific heat capacity of a substance is J/Kg.
The mathematical expression for the specific heat capacity can be written as:
Q = mCΔT Where C is the specific heat of the substance.
The specific heat capacity depends upon the starting temperature and is an intensive characteristic of the material.
Given, the melting point of the lead T₂ = 327.5° C
The initial temperature of the lead, T₁ = 21° C
The latent heat of the lead given, L = 230000 J/Kg K
The specific heat of the lead, C = 130 J/Kg K
The heat required to melt the lead from 12°C to 327.5 °C is :
Q = m× [C × (T₂ - T₁) + L ]
Q = 0.75 × [0.130 (327.5 - 21) + 23000]
Q = 51521 J
Learn more about specific heat, here:
brainly.com/question/11297584
#SPJ5
given two temperatures, 39 °F and 51°F, which if the following correctly compares the number of chances for particals to bounce off each other during chemical reaction?
Same at both
Lower at 39 °F
Lower at 51 °F
Does not depend on temperature
Answer:
Higher temperature = more bouncing.
So, the correct answer is that there will be less bouncing at 39 degrees F. (Lower at 39 F)
Let me know if this helps!
A tank contains oxygen gas at 2.551 atm. What is the pressure in mmHg?
The force exerted on the container by the particles of the matter is called pressure. The tank containing oxygen gas at 2.551 atm will have a pressure of 1939 mm Hg.
What is pressure?Pressure is the property used to estimate the force experienced by the system due to the liquid or the gas held in it. The pressure of the gas can be calculated by the ideal gas and force and area.
The pressure is created due to the collision of the particles of the gases and liquids on the wall perpendicularly. It is estimated in Pascal (Pa) as the standard unit along with atm and mmHg.
It is known that 1 atm = 760 mm Hg
Given,
The pressure of oxygen gas = 2.551 atm
Using the conversion factor the pressure from atm to mm Hg is calculated as,
1 atm = 760 mm Hg
2.551 atm = (2.551 atm × 760 mm Hg) ÷ 1 atm
= 1938.76 mmHg
Therefore, 1939 mm Hg is the pressure of the oxygen gas.
Learn more about pressure here:
https://brainly.com/question/20050281
#SPJ2
Alex drips hydrochloric acid onto a 5.9 g piece of magnesium in a single displacement reaction. How many molecules of HCl are required? 2HCl(aq) + Mg(s) → MgCl2(aq) + H2(g)
how do you do this?
2.96 × 10²³ molecules is required if Alex drips hydrochloric acid onto a 5.9 g piece of magnesium in a single displacement reaction
According to this question, hydrochloric acid (HCl) reacts with magnesium metal (Mg) to produce magnesium chloride and hydrogen has as follows:
2HCl(aq) + Mg(s) → MgCl2(aq) + H2(g)
Based on the balanced chemical equation above; 2 moles of HCl reacts with 1 mole of Mg. Next, we convert 5.9g of Mg to moles by using the formula; mole = mass/molar massWhere; Mg = 24g/mol
mole = 5.9/24
mole = 0.246mol of Mg
If 2 moles of HCl reacts with 1 mole of Mg. 0.246 mol of Mg will react with (0.246 × 2) = 0.492mol of HClTo convert mole to number of molecules, we multiply number of moles by 6.02 × 10²³ (Avogadro's no.)
Hence, number of molecules of HCl required is 0.492mol × 6.02 × 10²³
= 2.96 × 10²³ molecules of HClHCl
Learn more: https://brainly.com/question/14948089
1. What are some examples of forces found in everyday life? (Give examples from the bike picture
above OR make up your own examples.)
2 Define the word "motion"...
3. What do you think the following phrase from the definition means with respect to time and in
comparison to the position of other objects used as reference points?"
4. Define the word "Yorco...
5. Give an example from everyday life of an object that is "in motion (there is no "correct answer for
this - all reasonable answers accepted).
6. What is an example from everyday life of a force acting on an object? (there is no correct answer"..)
i need help on the questions
Answer:
1.answer = pushing force
= pulling force
=gravity force
How is the mass percent of elements in a compound different for a 1.0-g sample versus a 100.-g sample versus a 1-mole sample of the compound?
Answer:
since mass percent is based on the proportions of elements in a compound, the mass of a sample does not matter
The mass percent or percentage by mass of a chemical compound is a constant.
What is mass percent?Mass percent can be defined as percentage by mass and it is the concentration of a given amount (quantity) of element in a chemical compound or a component of a mixture.
The mass percent or percentage by mass of a chemical compound is a constant, regardless of the amount of substance that is present. Thus, all chemical compound always have a constant composition because mass percent is typically based on the proportions of the elements contained in a chemical compound.
Read more on mass here: brainly.com/question/3173452
Ca(OH)2 + HCl CaCl2 + H2O Choose the acidic and basic radical a) H,O b) Ca,H c) Cl,O d) Ca,Cl
Answer:
Answer is Option A
Explanation:
it's the correct answer
Which of the following is an example of a physical, rather than a chemical, change?
Answer: The question is not clear
Explanation:
Evaluate the exponential expression (−2)6.
A general exponential expression is something like:
A^n
This means that we need to multiply the number A by itself n times.
Using that we will get (-2)^6 = 64
With that definition, we can rewrite:
(-2)^6 = (-2)*(-2)*(-2)*(-2)*(-2)*(-2)
So we just need to solve the above expression.
Also, remember the rule of signs:
(-)*(-) = (+)
We will get:
(-2)*(-2)*(-2)*(-2)*(-2)*(-2) = [(-2)*(-2)]*[(-2)*(-2)]*[(-2)*(-2)]
= 4*4*4 = 16*4 = 64
Then we got:
(-2)^6 = 64
If you want to learn more, you can read:
https://brainly.com/question/17172630
MnO₄- chemical name for ALEKS
Mno4- chemical name is permanganate
Where are the most gases located on the periodic table?
Answer:
They are mostly located in group 18 (column 18), or far right
True or false? The smaller the temperature differences, the stronger the wind will be.
Answer:
true because whenever the temperature drops it gets colder
