What mass of oxygen is needed for the complete combustion of 1.60-10^-3
g
of methane?
Express your answer with the appropriate units.

Answer:

The molar mass is "185.44 g/mol".

Explanation:

According to the question,

The moles of NaOH will be:

= [tex]\frac{0.315}{1000}\times 25.72[/tex]

= [tex]8.1018\times 10^{-3} \ moles[/tex]

Number of moles of an acid will be:

= [tex]\frac{8.1018\times 10^{-3}}{3}[/tex]

= [tex]2.7006\times 10^{-3} \ moles[/tex]

We know that,

⇒ [tex]Moles = \frac{Mass}{Molar \ mass}[/tex]

hence,

Molar mass of unknown acid will be:

= [tex]\frac{Mass \ in \ g}{Moles}[/tex]

= [tex]\frac{0.5008}{2.7006\times 10^{-3}}[/tex]

= [tex]185.44 \ g/mol[/tex]

We know

[tex]\boxed{\Large{\sf M_1V_1=M_2V_2}}[/tex]

[tex]\\ \Large\sf\longmapsto M_2=\dfrac{M_1V_1}{V_2}[/tex]

[tex]\\ \Large\sf\longmapsto M_2=\dfrac{3(75)}{250}[/tex]

[tex]\\ \Large\sf\longmapsto M_2=\dfrac{225}{250}[/tex]

[tex]\\ \Large\sf\longmapsto M_2=0.9M[/tex]

Answer:

Mass 1=3M

Mass 2=?

Volume1=75mL

Volume2=250mL

By using molarity formula:

mass1*volume 1=mass2*volume 2

3M*75=mass2*250

mass2=225/250

mass2:0.9M

Answer:

Mn2+(aq) + 2H2O(l)  ⇒ MnO2(s) + 4H+(aq) + 2e-

Explanation:

Step 1: Data given

The oxidation number of manganese ion (Mn2+ ) is +2

The oxidation number of manganese dioxide  is +(MnO2)4

This means the oxidation number from Mn will go from +2 to +4, since it's increased, this is an oxidation reaction

Mn2+(aq)  ⇒ MnO2(s)

We have to balance both sides. Mn is already the same. But on the right side we have O atoms. T obalance both sides we have to add O atoms to the left side. This by adding 2x H2O

Mn2+(aq) + 2H2O(l)  ⇒ MnO2(s)

Now the amount of O atoms is balanced, but we have H- atoms at the left side. To balance we have to add 4 H atoms to the right side

Mn2+(aq) + 2H2O(l)  ⇒ MnO2(s) + 4H+(aq)

Now the amount of atoms is balanced at both sides. We also have to check if the charge on both sides is the same.

Since the left side has a charge of +2, and right has a charge of +4, we have to add 2 electrons to balance this.

Mn2+(aq) + 2H2O(l)  ⇒ MnO2(s) + 4H+(aq) + 2e-

An indicator usually signals the endpoint of a neutralization reaction by undergoing a color change. They aid in discovering the point of equivalence of a titration.

The kind of indicator used depends on the nature of acid/base reacted.

In the case of  CH3NH2 with HBr which  strong acid and weak base titration, suitable indicators include; bromophenol blue, methyl  orange, methyl red, and chlorophenol blue.

In the case of HNO3 with NaOH, this is a strong acid, strong base titration hence phenolphthalein, methyl red, chlorophenol, and bromothymol blue cresol red blue are suitable indicators.

In the case of  HNO2 with KOH, this a weak acid, strong base titration and the suitable indicators are cresol red and  phenolphthalein.  

For more information on titration see

https://brainly.com/question/22536636

Answer: 1090°C

Explanation: According to combined gas laws

(P1 × V1) ÷ T1 = (P2 × V2) ÷ T2

where P1 = initial pressure of gas = 80.0 kPa

V1 = initial volume of gas = 10.0 L

T1 = initial temperature of gas = 240 °C = (240 + 273) K = 513 K

P2 = final pressure of gas = 107 kPa

V2 = final volume of gas = 20.0 L

T2 = final temperature of gas

Substituting the values,

(80.0 kPa × 10.0 L) ÷ (513 K) = (107 kPa × 20.0 L) ÷ T2

T2 = 513 K × (107 kPa ÷80.0 kPa) × (20.0 L ÷ 10.0 L)

T2 = 513 K × (1.3375) × (2)

T2 = 1372.275 K

T2 = (1372.275 - 273) °C

T2 = 1099 °C

1090 degree Celsius

hope it helps

Answer:

b) 0.75 mol, 0.9375 mol

Explanation:

According to this question, ammonia reacts with oxygen to produce nitrogen monoxide and water. The chemical equation is as follows:

4NH3(g) + 5O2(g) → 4NO(g) + 6H2O(g)

Based on this balanced equation, 4 moles of ammonia (NH3) reacts with 5 moles of oxygen (O2).

A stoichiometric amount of the two reactants (NH3 and O2) must represent the ratio 4:5.

Given the provided options;

0.75 mol of ammonia (NH3) will react with (0.75 × 5/4) = 0.935 mol of O2 for them to be in stoichiometry.

N.B: 1 mol of NH3 will react with 1.25mol of O2 and not 1g, 1.25g.

The compound in this reaction which is having the elemental ratio of 1:4:1 is NH₄Cl where nitrogen and chlorine are of one mole each with 4 hydrogens.

Elemental ratio of a compound is the ratio of number of atoms  of each  elements in that compound. The elemental ratio can be determined from the molecular formula of compounds.

The given reaction is a double displacement reaction. Here, the Cl group is replaced to the ammonia and OH group is replaced to the water. Thus, two species is replaced in the reaction.

In NH₄Cl, there are one nitrogen, 4 hydrogens and one chlorine atom. Therefore, the elemental ratio of the compound is 1:4:1. The elemental ratio of water is 2:1 and HCl is 1:1 and that in NH₄OH is 1:5:1. Hence, option b is correct.

To find more on elemental ratio, refer here:

https://brainly.com/question/17613193

#SPJ2

Answer: B. The anion affects the color of the solution more than the intensity of the color.

Explanation:

An ionic bond is gotten when an electron is transferred from a metal atom to a non-metal one. It should be noted that the ionic bonds simply has an anion and a cation.

An anion is formed when a valence election is gained by a non metal while a cation is formed when the metal ion misplaces a valence electron.

The effect of the anion of an ionic compound on the appearance of the solution is that the anion affects the color of the solution more than the intensity of the color.

The anions affect the color of the solution more than the intensity of the color.

Anions are the molecules or atoms that have one or more extra electrons in the valence cell.

When the number of electrons is increased or decreased in the solute molecule it completely change the color of the solution.

For example - Yellow chromate and orange dichromate

Therefore, the anions affect the color of the solution more than the intensity of the color.

Learn more about anion:

https://brainly.com/question/24937049

Answer:

The right solution is "-602.69 KJ heat".

Explanation:

According to the question,

The 100.0 g of carbon dioxide:

= [tex]\frac{100.0 \ g}{114.33\ g/mole}[/tex]

= [tex]0.8747 \ moles[/tex]

We know that 16 moles of [tex]CO_2[/tex] formation associates with -11018 kJ of heat, then

0.8747 moles [tex]CO_2[/tex] formation associates with,

= [tex]-\frac{0.8747}{16}\times 11018 \ KJ \ of \ heat[/tex]

= [tex]-0.0547\times 11018[/tex]

= [tex]-602.69 \ KJ \ heat[/tex]

Answer:

n Al=  10/27( mol)- >n Al2O 3 =5/27(mol)

Explanation:

Answer:

495 J

Explanation:

When the hot pot was set on the counter to cool, heat energy was lost from the pot. Note that according to the first law of thermodynamics, heat is neither created nor destroyed.

This implies that, the heat energy lost from the pot must be gained by the surrounding air. Therefore, if 495 J of energy is lost from the pot, then 495 J of energy is gained by the surrounding air.

Answer:

its letter c

Explanation:

I hope this help

The reaction of silver and nitric acid is given with the chemical equation as Ag + 2 H⁺ + HNO₃ → NO₂ + Ag⁺ + H₂O + 2e⁻. Thus, option C is correct.

Redox reaction can be given as the chemical reaction in which one of the reactants is oxidized and the other gets reduced. Oxidation is defined as the loss of electrons and gain of hydrogen, while reduction is defined as the gain of electrons and loss of hydrogen.

The change in the oxidation and reduction changes the oxidation states of the elements, and thereby mediated the formation of a more stable chemical compound.

The reaction of silver with nitric acid forms the release of hydrogen from nitric acid, thereby the compound gets reduced, while with the loss of electrons, the silver gets oxidized.

The chemical equation for the same can be given as:

Ag + 2 H⁺ + HNO₃ → NO₂ + Ag⁺ + H₂O + 2e⁻

Thus, option C is correct.

Learn more about redox reaction, here:

https://brainly.com/question/13293425

#SPJ5

Answer:

21.5mL of a 0.100M HCl are required

Explanation:

The sodium phenoxide reacts with HCl to produce phenol and NaCl in a 1:1 reaction.

To solve this question we need to find the moles of sodium phenoxide. These moles = Moles of HCl required to reach equivalence point and, with the concentration, we can find the needed volume as follows:

Mass NaC6H5O:

1.000g * 25% = 0.250g NaC6H5O

Moles NaC6H5O -116.09g/mol-

0.250g NaC6H5O * (1mol/116.09g) = 2.154x10⁻³ moles = Moles of HCl required

Volume 0.100M HCl:

2.154x10⁻³ moles HCl * (1L/0.100mol) = 0.0215L =

Answer:

Explanation:

From the given information:

The surface area of the can = (30 × 20 × 2) +(20× 15 × 2) +(30 × 15 × 2)

= 1200 + 600 + 900

= 2700 cm²

Since 1 inch² = 0.155 inch²

The surface area in inches² = 2700 × 0.155 inch²

= 418.5 inches²

The total force can be determined by using the expression:

Force = Pressure ×Area

Force = 14.7 psi ×  418.5 inches²

Force = 6151.95 lbs

Yes, the gasoline can will be able to withstand the force.

Answer:

HCl contain a polar covalent bond because H is more electropositive than Cl and Cl is more electronegative than H, resulting in a dipole moment

Answer:

There must be a complete circuit to allow electrons to flow. Oxidation happens at the anode. Reduction happens at the cathode.

Explanation:

Select all that are true for both a voltaic cell and an electrolytic cell.

There must be a complete circuit to allow electrons to flow. YES. This is true for both cells.

The redox reaction is spontaneous. NO. This is only true for the voltaic cell.

Oxidation happens at the anode. YES. This is true for both cells.

Reduction happens at the cathode. YES. This is true for both cells.

The redox reaction is non-spontaneous. NO. This is only true for the electrolytic cell.

The statements that have been true for both voltaic and electrolytic cells are:

Option A: There must be a complete circuit to allow electrons to flow.

Option C: Oxidation happens at the anode.

Option D: Reduction happens at the cathode.

The electrolytic cells are the one that converts electrical energy into chemical energy. Voltaic cells convert chemical energy into electrical energy.

From the given options, the best-suited option for both electrolytic and voltaic cells are:

The statements that have been true for both voltaic and electrolytic cells are, Option A, C, and D.

For more information about the electrolytic and voltaic cell, refer to the link:

https://brainly.com/question/1370699

Answer:

A. filtration

Hope it helps

Answer:

Age of rock = 6.12 × 10³ years

Note: The question is incomplete.A similar but complete question is given below.

The half-life for the radioactive decay of carbon-14 to nitrogen-14 is 5.73 x 10^3 years. Suppose nuclear chemical analysis shows that there is 0.523mmol of nitrogen-14 for every 1.000 mmol of carbon-14 in a certain sample of rock.

Calculate the age of the rock. Round your answer to 2 significant digits.

Explanation:

The half-life of a radioactive material is the time taken for half the atoms in the atomic nucleus of a material to disintegrate.

The half-life for the radioactive decay of carbon-14 to nitrogen-14 is given as 5.73 x 10³ years. This means that given 1 mole of carbon-14 is present initially, after one half-life, 0.5 moles of carbon-14 would remain.

Number of millimoles of carbon-14 remaining = 1 - 0.523 = 0.477 mmol

Number of half-lives that the carbon-14 has undergone is determined as follows:

Amount remaining = (1/2)ⁿ

where nnis number of half-lives

0.5 mmol = one half-life

0.5 = (1/2)¹

O.477 = (1/2)ⁿ = (0.5)ⁿ

㏒₀.₅(0.477) = n

n = ㏒(0.477)/㏒(0.5)

n = 1.067938829

Age of the rock = number of half-lives × half-life

Age of rock = 1.067938829 × 5.73 × 10³ years

Age of rock = 6.12 × 10³ years

Answer:

electric charge

Explanation:

Charged particles are deflected in an electric or a magnetic field. The particles discovered by J.J. Thomson were charged particles.

When these charged particles are passed through electric and magnetic fields, deflection occurs depending on the nature of the charge.

A positive charge is deflected towards the negative part of an electric field or the south pole of a magnetic field.

A negative charge is selected towards the positive end of an electric field or the north pole of a magnetic field.

Answer: The question wants you to determine the energy that the incoming photon must have in order to allow the electron that absorbs it to jump from  

n

i

=

2

to  

n

f

=

6

.

A good starting point here will be to calculate the energy of the photon emitted when the electron falls from  

n

i

=

6

to  

n

f

=

2

by using the Rydberg equation.

1

λ

=

R

⋅

(

1

n

2

f

−

1

n

2

i

)

Here

λ

si the wavelength of the emittted photon

R

is the Rydberg constant, equal to  

1.097

⋅

10

7

m

−

1

Plug in your values to find

1

λ

=

1.097

⋅

10

7

.

m

−

1

⋅

(

1

2

2

−

1

6

2

)

1

λ

=

2.4378

⋅

10

6

.

m

−

1

This means that you have

λ

=

4.10

⋅

10

−

7

.

m

So, you know that when an electron falls from  

n

i

=

6

to  

n

f

=

2

, a photon of wavelength  

410 nm

is emitted. This implies that in order for the electron to jump from  

n

i

=

2

to  

n

f

=

6

, it must absorb a photon of the same wavelength.

To find the energy of this photon, you can use the Planck - Einstein relation, which looks like this

E

=

h

⋅

c

λ

Here

E

is the energy of the photon

h

is Planck's constant, equal to  

6.626

⋅

10

−

34

.

J s

c

is the speed of light in a vacuum, usually given as  

3

⋅

10

8

.

m s

−

1

As you can see, this equation shows you that the energy of the photon is inversely proportional to its wavelength, which, of course, implies that it is directly proportional to its frequency.

Plug in the wavelength of the photon in meters to find its energy

E

=

6.626

⋅

10

−

34

.

J

s

⋅

3

⋅

10

8

m

s

−

1

4.10

⋅

10

−

7

m

E

=

4.85

⋅

10

−

19

.

J

−−−−−−−−−−−−−−−−−  

I'll leave the answer rounded to three sig figs.

So, you can say that in a hydrogen atom, an electron located on  

n

i

=

2

that absorbs a photon of energy  

4.85

⋅

10

−

19

J

can make the jump to  

n

f

=

6

.

Explanation:

Answer:

M of HNO₃ is 0.119M

Explanation:

A basic concept of titration is that in equivalence point:

mmoles of acid = mmoles of base

We have data from base and we only have data from volume of acid.

In a case our titration is a strong acid against a strong base.

We apply formula:

M of acid . Vol of acid = M of base . Vol of base

M of acid . 21.8 mL = 0.137M . 19 mL

M of acid = (0.137M . 19 mL) / 21.8 mL

M of acid = 0.119 M

When we neutralize all the titrant we reach the equivalence point.

At this point, pH = 7

2HNO₃  +  Ca(OH)₂ → Ca(NO₃)₂ +  2H₂O

Answer:

21.3 g. Option B

Explanation:

The reaction is:

4HF(g) + SiO₂(s) → SiF₄(g) + 2H₂O(g)

We analysed it and it is correctly balanced.

4 moles of hydrogen fluoride react to 1 mol of silicon dioxide in order to produce 1 mol of silicon fluoride and 2 moles of water vapor.

We determine molar mass of each reactant:

HF → 1.01 g/mol + 19 g/mol = 20.01 g/mol

SiO₂ → 16 g/mol . 2 + 28.09 g/mol = 60.09 g/mol

We convert mass to moles: 16 g . 1 mol /60.09g = 0.266 moles of glass

Ratio is 1:4. 1 mol of glass react to 4 moles of HF

Our 0.266 moles may react to (0.266 . 4) / 1 = 1.07 moles of gas

We convert moles to mass: 1.07 mol . 20.01 g/mol = 21.3 g

Answer:

Biolage is the answer

Explanation:

Because it's price is third most

Answer:

Answer is B) 20.0 moles

Explanation:

From the equation,

1 mole of Fe2O3 = 2 moles of Al

therefore 10.0 moles of Fe2O3 = 10×2

= 20.0 moles.

Answer:

[tex]\lambda=3451*10^{10}m[/tex]

Explanation:

From the question we are told that:

Energy state [tex]e=3.50 eV[/tex]

Time [tex]t=2ms[/tex]

Generally the equation for energy of Photon is mathematically given by

[tex]E=e-e_0[/tex]

[tex]E=3.6*10^{-19}J[/tex]

[tex]E=5.7*10^{-19}J[/tex]

Generally the equation for Wave-length of Photon is mathematically given by

[tex]\lambda=\frac{hc}{E}[/tex]

[tex]\lambda=\frac{6.626*10^{-34}*3*10^8}{5.76*10^{-19}}[/tex]

[tex]\lambda=3451*10^{10}m[/tex]

Answer:

See explanation and Image attached

Explanation:

The preparation of triphenylmethanol occurs as shown in the image attached to this answer.

The first step is the nucleophillic reaction of the phenyl magnesium bromide with the carbonyl group.

Reaction of the second molecule of phenyl magnesium bromide with the product yields triphenyl methoxide ion. Reaction with acid yields the triphenylmethanol product which is extracted into the organic phase.

The triphenylmethanol product can be purified by recrystallization.

Answer:

is this question or you just asking I can't understand.

Answer:

a. 1.12 L

Explanation:

Step 1: Write the balanced equation for the photosynthesis

6 CO₂(g) + 6 H₂O(l) ⇒ C₆H₁₂O₆(s) + 6 O₂(g)

Step 2: Calculate the moles corresponding to 2.20 g of CO₂

The molar mass of CO₂ is 44.01 g/mol.

2.20 g × 1 mol/44.01 g = 0.0500 mol

Step 3: Calculate the moles of O₂ produced

The molar ratio of CO₂ to O₂ is 6:6. The moles of O₂ produced are 6/6 × 0.0500 mol = 0.0500 mol

Step 4: Calculate the volume occupied by 0.0500 moles of O₂ at STP

At STP, 1 mole of O₂ occupies 22.4 L.

0.0500 mol × 22.4 L/1 mol = 1.12 L

Answer:

See explanation

Explanation:

The equation of the reaction is;

C3H8 + 5O2 ----> 3CO2 + 4H2O

Number of moles of C3H8 = 132.33g/44g/mol = 3 moles

1 mole of C3H8 yields 3 moles of CO2

3 moles of C3H8 yields 3 × 3/1 = 9 moles of CO2

Number of moles of oxygen = 384.00 g/32 g/mol = 12 moles

5 moles of oxygen yields 3 moles of CO2

12 moles of oxygen yields 12 × 3/5 = 7.2 moles of CO2

Hence C3H8 is the limiting reactant.

Mass of CO2 produced = 9 moles of CO2 × 44 g/mol = 396 g of CO2

1 moles of C3H8 yields 4 moles of water

3 moles of C3H8 yields 3 × 4/1 = 12 moles of water

Mass of water = 12 moles of water × 18 g/mol = 216 g of water

b) Actual yield = 269.34 g

Theoretical yield = 396 g

% yield = actual yield/theoretical yield × 100/1

% yield = 269.34 g /396 g × 100

% yield = 68%

Answer:

The order of reactivity towards electrophilic susbtitution is shown below:

a. anisole > ethylbenzene>benzene>chlorobenzene>nitrobenzene

b. p-cresol>p-xylene>toluene>benzene

c.Phenol>propylbenzene>benzene>benzoic acid

d.p-chloromethylbenzene>p-methylnitrobenzene> 2-chloro-1-methyl-4-nitrobenzene> 1-methyl-2,4-dinitrobenzene

Explanation:

Electron donating groups favor the electrophilic substitution reactions at ortho and para positions of the benzene ring.

For example: -OH, -OCH3, -NH2, Alkyl groups favor electrophilic aromatic substitution in benzene.

The -I (negative inductive effect) groups, electron-withdrawing groups deactivate the benzene ring towards electrophilic aromatic substitution.

Examples: -NO2, -SO3H, halide groups, Carboxylic acid groups, carbonyl gropus.