what is the relation between centre of gravity and stability

Answer:

So mass is the amount of matter in an object, but weight is the amount of force that is being applied to your body from gravity.

Mass does not change unless you change your person like your haircut, fingernail length, ect.

Weight changes depending on your mass, because the heavier you are, the stronger the gravitational pull on your person will be, which increases your weight.

That is why if you go onto the moon, for example, your weight is different, since the gravitational pull is weaker than on Earth, so you weigh less.

Explanation:

Answer:

A. a wire in a winding is broken.

Explanation:

An electric circuit can be defined as an interconnection of electrical components which creates a path for the flow of electric charge (electrons) due to a driving voltage.

Generally, an electric circuit consists of electrical components such as resistors, capacitors, battery, transistors, switches, inductors, etc.

Basically, an electric circuit is considered to be open when there's a broken continuity (broken path), which causes no current to flow through the circuit.

On the other hand, a closed circuit is one in which there's a flow of current due to a complete electrical path.

On a related note, an open winding in an electric motor means that a wire in a winding is broken.

Answer:

Q. 1. Newton's Law of gravitation states that all bodies in the universe exerts a force of attraction on all other bodies in the universe with a proportional force to both the product of the masses of the bodies and inversely proportional to the square of the distance between their centers

Mathematically, we have;

[tex]F = G \times \dfrac{m_1 \times m_2}{R^2}[/tex]

Where;

m₁, and m₂ are the masses of the bodies

R = The distance between their centers

G = The gravitational constant = 6.6743 × 10⁻¹¹ N·m²/kg²

The gravitational constant, G, is the Newton's law of gravitation's constant of proportionality between the force of attraction that exist two bodies and the product of their masses divided by the square of the distance between their centers

Q. 2. Newton's law of gravitation in vector form is presented as follows;

[tex]\underset{F_{12}}{\rightarrow} = -G \times \dfrac{m_1 \times m_2}{R_{21}^2} \cdot \hat R_{12}[/tex]

The above equation gives the gravitational force of attraction of body 1 on body 2, with the negative sign and unit vector indicating that the force of of gravity is towards body 1

The force of gravity of body 2 on 1 is presented as follows;

[tex]\underset{F_{12}}{\rightarrow} = -G \times \dfrac{m_1 \times m_2}{R_{12}^2} \cdot \hat R_{21}[/tex]

The gravitational force of attraction of body 2 on body 1 is therefore, equal in magnitude and opposite in direction of the gravitational force of body 1 on body 2 (towards body 2)

[tex]-\underset{F_{12}}{\rightarrow} = G \times \dfrac{m_1 \times m_2}{R_{21}^2} \cdot \hat R_{12} = G \times \dfrac{m_1 \times m_2}{R_{21}^2} \cdot -(\hat R_{21}) = -G \times \dfrac{m_1 \times m_2}{R_{21}^2} \cdot \hat R_{21}[/tex]

[tex]-\underset{F_{12}}{\rightarrow} = -G \times \dfrac{m_1 \times m_2}{R_{21}^2} \cdot \hat R_{21} = \underset{F_{21}}{\rightarrow}[/tex]

[tex]-\underset{F_{12}}{\rightarrow} = \underset{F_{21}}{\rightarrow}[/tex]

Explanation:

Bear will become extinct due to global warming.

The gases which get easily trapped inside the glasses and increase the temperature of the atmosphere causing the global warming level to increase overall.

Global warming is threatening polar bear habitats and the bears way of life. If global warming continues, predict what will become of the polar bear in the next 10,000 years

Thus, bear will extinct.

Learn more about greenhouse gas.

https://brainly.com/question/4509458

#SPJ2.

Answer:

Efficiency of a machine is 90% this means that the total energy produced to the machine only 90% is useful and given as a output.

Machines are not 100% efficient because some of the work done by a machine is used to overcome friction

Answer:

An interaction of one object with another object results in a force between the two objects. Thus, at-least two objects must interact for a force to come into play.

Answer:

resistances is inversely proportional to the area of cross section of the conductor

Explanation:

The resistance of a wire is directly proportional to its length and inversely proportional to its cross-sectional area.

hope this helps you

have a nice day:)

Answer:

Torque; τ = 4.712 × 10^(-3) J

Magnetic moment; M = 0.0248 J/T

Explanation:

Torque is gotten from the formula;

τ = BIA

Where;

B is magnetic field

I is current

A is area

We are given;

B = 0.19T

I = 6.2A

Rectangle dimensions = 5cm by 8cm = 0.05m by 0.08m

Thus;

Area; A = 0.05m × 0.08m = 0.004 m²

Thus;

τ = 0.19 × 6.2 × 0.004

τ = 4.712 × 10^(-3) J

Formula for the magnetic moment is given by;

M = IA

M = 6.2 × 0.004

M = 0.0248 J/T

Answer:

when it comes to machines being Rusty oil is like the root loosener

Answer:D

Explanation:

Answer:

a. Bar A is a magnet

b. Bar B is a metal or magnetic material

c. Bar D is a non-magnetic material

Explanation:

a. Bar A

Since B attracts both A and C, it shows that A and C are both magnetic. So, it is either B and A are magnets or B and C are magnets or A and C are magnets. Also, since A and C sometime attract one another and sometimes repel one another, it means that they attract when their poles are opposite and repel when their poles are negative. This show that both A and C are magnets. Thus, A is a magnet.

b. Bar B

Since B is attracted to both A and C and we know that both A and C are magnets, it implies that B is a magnetic material. Since it does not repel either A or C.

c. Bar D

Since D does not attract A, B or C, D is a non-magnetic material. Since, only a magnetic material can be attracted to magnets and we have established that both A and C are magnets and that B is magnetic. Since D is not also attracted to B, it implies that D is thus non-magnetic.

Answer: True

Explanation:

It should be noted that when refrigerant is added in vapor form to the operating refrigeration system, then the addition of the refrigerant should be to the low-pressure side of the refrigeration system.

Furthermore, when system pressures are lower than the pressure in the refrigerant tank as stated in the question, then the refrigerant can be added to both the high and low pressure sides of the system.

Therefore, the correct option is true.

Fx = 295.4N

180°-90°-35°= 55°

F= m(a)

Fy = 43kg(9.81m/s²)

Fy = 421.83N

tan(55°) = 421.83N/Fx

Fx = 421.83N/tan(55°)

Fx = 295.3685458N

Each component describes the influence of that chain in the given direction. The vertical component describes the upward influence of the force upon Fido and the horizontal component describes the rightward influence of the force upon Fido.

The kinetic frictional force is always in the direction opposite to the velocity of the object.

Learn more about  horizontal component, refer

https://brainly.com/question/18333367

#SPJ2

Answer:

ccccccccc or bbbbbbb or aaaaaaaa or ddddddd

Answer:

2.5 m/s²

Explanation:

The given parameters are;

The mass of the car, m = 2,000 kg

The radius of the car, r = 40.0 m

The coefficient of friction between the car tires and the road, μ = 0.500

The constant speed with which the car moves, v = 10.0 m/s

The normal reaction of the road on the car, N = The weight of the car;

∴ N = m × g

Where;

g = The acceleration due to gravity ≈ 9.81 m/s²

N ≈ 2,000 kg × 9.81 m/s² = 19,620 N

The frictional force, [tex]F_f[/tex] = μ × N

The centripetal force, [tex]F_c[/tex] = m·v²/r

The car moves without slipping when [tex]F_f[/tex] = [tex]F_c[/tex]

Therefore, [tex]F_f[/tex] = 0.500 × 19,620 N = 2,000 kg × [tex]v_{max}[/tex]²/40.0 m

∴ [tex]v_{max}[/tex] = √(0.500 × 19,620 N × 40.0 m/2,000 kg) ≈ 14.007 m/s

Therefore, the velocity with which the car moves, v < [tex]v_{max}[/tex]

The cars centripetal acceleration, [tex]a_c[/tex] = v²/r

∴ [tex]a_c[/tex] = (10.0 m/s)²/40.0 m = 2.5 m/s²

The cars centripetal acceleration as it goes round the turn, [tex]a_c[/tex] = 2.5 m/s².

Answer:

Mark brainliest please

answer is 5.5 degrees

Explanation:

Given,

Speed of car (v) = 50km/hr = 50×1000/60×60 m/s

Radius of circle (r) = 200m

Banking angle (θ) =?

we know ,

tanθ = v^2/rg

or , tanθ = (50×1000/60×60)^2/200×10 = 0.0965

∴ θ = tan-1(0.0965) = 5.5°

Answer:

difference between mass and weight is that mass is amount of matter in a material while weight is a measure of how the force of gravity acts upon that mass.the mass of an object will be same on earth and mars but its weight on both planets will be different.

Using 3rd equation of kinematics

[tex]\boxed{\Large{\sf v^2-u^2=2as}}[/tex]

[tex]\\ \Large\sf\longmapsto v^2=u^2+2as[/tex]

[tex]\\ \Large\sf\longmapsto v^2=24^2+2(4)(96)[/tex]

[tex]\\ \Large\sf\longmapsto v^2=576+768[/tex]

[tex]\\ \Large\sf\longmapsto v^2=1344[/tex]

[tex]\\ \Large\sf\longmapsto v=\sqrt{1344}[/tex]

[tex]\\ \Large\sf\longmapsto v=36.6m/s[/tex]

Answer:

658.2 nm

Explanation:

Since the galaxy is moving at relavitistic speed, we use the equation for relativistic Doppler shift of light.

So, the wavelength of light observed on the Earth is λ

λ = λ'([tex]\sqrt{\frac{ 1 + \frac{v}{c} }{1 - \frac{v}{c} } }[/tex])

where  λ' = wavelength of light emitted by galaxy = 656 nm, v = speed of galaxy = 1000 km/s (positive since the galaxy is moving away from the Earth) and c = speed of light = 300000 km/s

So, substituting the values of the variables into the equation, we have

λ = λ'(√[{1 + (v/c)}/(1 - (v/c)]

λ = 656 nm(√[{1 + (1000 km/s/300000 km/s)}/(1 - (1000 km/s/300000 km/s)]

λ = 656 nm(√[{1 + 1/300}/(1 - 1/300]

λ = 656 nm(√[{(300 + 1)/300}/{(300 - 1)/300}]

λ = 656 nm(√[{(301)/300}/{(299)/300}]

λ = 656 nm(√[301/299])

λ = 656 nm(√1.0067)

λ = 656 nm × 1.0033

λ = 658.19 nm

λ ≅ 658.2 nm

So, the wavelength observed on Earth is 658.2 nm

Answer:

f=ma......10N=0.2a....=50m/s

Answer:

here,

force = mass× acceleration

10 = 0.2 kg × a

or, 10/0.2=a

or, a = 50km/h^2

is the required ans .

Answer:

is that rm in you profile pic

Answer:

The effect of gravity extends from each object out into space in all directions, and for an infinite distance. However, the strength of the gravitational force reduces quickly with distance. Humans are never aware of the Sun's gravity pulling them because the pull is so small at the distance between the Earth and Sun.

Answer:

The Earth's gravitational force accelerates objects when they fall. It constantly pulls, and the objects constantly speed up.

Explanation:

Answer:

Explanation:

From your other post, the complete question is:

"You are pulling a sled using a horizontal rèpe, as shown in the diagram. The rope pulls the sled. exerting a force of 50 N to the right. The snow exerts a friction force of 30 N on the sled to the left. The mass of the sled is 50 kg.

Find the sum of the force on the sled.

Determine the acceleration of the sled .

If the sled has an initial velocity 2m/s to the right, how fast will it be traveling after 5 seconds?

"

Given the rope exerting a force of 50 N to the right and the snow exerts a friction force of 30 N to the left, the sum of forces

= 50 - 30

= 20N to the right

The mass of sled is 50 kg and force = mass * acceleration.

Acceleration = Force / mass

= 20 / 50 = 0.4 m/s^2 to the right

If the sled has an initial velocity 2m/s to the right, after 5 seconds it will be traveling at initial velocity + acceleration * time

= 2 + 0.4*5

= 4 m/s to the right

Answer:

Explanation:

net force = applied force - friction force

= 50-30

= 20N to right

acceleration = net force/mass

= 20/50

= 2/5m/s tp right

final velocity = initial velocity + acceleration*time

= 2+2/5*5

= 4m/s to right

Explanation:

I think it is the third image as marked in the diagram I kept above because as we know first class levers have the fulcrum between the force and the load

Answer:

Explanation:

The main equation to solve this is F = ma, where F is the force applied to the brakes with respect to its acceleration. We have the mass that we need, but we do not have the acceleration. That's the first thing we have to find. However, our velocity needs to be stated in m/s and right now it's in km/h. Converting that:

[tex]90\frac{km}{hr}*\frac{1000m}{1km}*\frac{1hr}{3600s} =25\frac{m}{s}[/tex] Now we're ready to find the acceleration:

[tex]a=\frac{v_f-v_0}{t}[/tex] where the top line there translates to the final velocity minus the initial velocity.

[tex]a=\frac{0-25}{3.0}[/tex] so the acceleration is -8.3 m/s/s

We can use that now in the force equation above:

F = 1200(-8.3) and

F = -1.0 × 10⁴ N (that's 10,000 N to the correct number of sig dig's; the negative sign means that the force is being applied in the direction opposite to that which the van is currently moving)

Answer:

Their final relative velocity is 0.190 m/s

Explanation:

The relative velocity of the satellites, v = 0.190 m/s

The mass of the first satellite, m₁ = 4.00 × 10³ kg

The mass of the second satellite, m₂ = 7.50 × 10³ kg

Given that the satellites have elastic collision, we have;

[tex]v_2 = \dfrac{2 \cdot m_1}{m_1 + m_2} \cdot u_1 - \dfrac{m_1 - m_2}{m_1 + m_2} \cdot u_2[/tex]

[tex]v_2 = \dfrac{ m_1 - m_2}{m_1 + m_2} \cdot u_1 + \dfrac{2 \cdot m_2}{m_1 + m_2} \cdot u_2[/tex]

Given that the initial velocities are equal in magnitude, we have;

u₁ = u₂ = v/2

u₁ = u₂ = 0.190 m/s/2 = 0.095 m/s

v₁ and v₂ = The final velocities of the satellites

We get;

[tex]v_1 = \dfrac{2 \times 4.0 \times 10^3}{4.0 \times 10^3 + 7.50 \times 10^3} \times 0.095 - \dfrac{4.0 \times 10^3- 7.50\times 10^3}{4.0 \times 10^3+ 7.50\times 10^3} \times 0.095 = 0.095[/tex]

[tex]v_2 = \dfrac{ 4.0 \times 10^3 - 7.50\times 10^3}{4.0 \times 10^3 + 7.50 \times 10^3} \times 0.095 + \dfrac{2 \times 7.50\times 10^3}{4.0 \times 10^3+ 7.50\times 10^3} \times 0.095 = 0.095[/tex]

The final relative velocity of the satellite, [tex]v_f[/tex] = v₁ + v₂

∴ [tex]v_f[/tex] = 0.095 + 0.095 = 0.190

The final relative velocity of the satellite, [tex]v_f[/tex] = 0.190 m/s

Answer:

Explanation:

[tex]\lambda\\[/tex] = v/f

^That is the formula we are going to use.

Now, we were given the speed (v), which is 20.

Now we need to find frequency, in order to solve for the wavelength.

Frequency is the amount of waves in a fixed unit of one second, meaning our F value is the value of 5 divided by 4.

5/4 = 1.25

Therefore our F is 1.25

Now lets plug it in

[tex]\lambda\\[/tex] = v/f

[tex]\lambda\\[/tex] = 20/1.25

[tex]\lambda\\[/tex] = 16

Conversion:

[tex]\lambda\\[/tex] = 8