Answer:
independent demand is based on market forces while Dependent demand is based on production schedule
Explanation:
Independent demand is the demand for a finished product bought by a consumer e.g. the demand for a textbook by a student
independent demand is based on market forces e.g. the price of the good
Consumers would be more willing to purchase a good that is cheaper compared to other goods
Dependent demand is the demand for the factors of productions that are needed in the production of the final good or service. e.g. the demand for labour , purchase of inventory needed to produce a good
If consumers do not demand for the finished product, there would be no demand for the inventory
On January 1, 2018, Ameen Company purchased major pieces of manufacturing equipment for a total of $36 million. Ameen uses straight-line depreciation for financial statement reporting and MACRS for income tax reporting. At December 31, 2020, the book value of the equipment was $30 million and its tax basis was $20 million. At December 31, 2021, the book value of the equipment was $28 million and its tax basis was $12 million. There were no other temporary differences and no permanent differences. Pretax accounting income for 2021 was $50 million.
Required:
a. Prepare the appropriate journal entry to record Ameenâs 2021 income taxes. Assume an income tax rate of 25%.
b. What is Ameenâs 2021 net income?
Answer:
1.31-Dec-21
Dr Income tax expense $12.50
Cr To Income taxes payable $11.00
Cr To Deferred tax liability $1.50
2.$37.50 million
Explanation:
1. Preparation of the appropriate journal entry to record Ameenâs 2021 income taxes. Assume an income tax rate of 25%.
Depreciation as per books for 2021 = $30 - $28 Depreciation as per books for 2021= $2 million
Depreciation as per tax for 2021 = $20 - $12
Depreciation as per tax for 2021 = $8 million
Taxable income = $50 + $2 - $8
Taxable income = $44 million
JOURNAL ENTRIES - Ameen Company (In million)
31-Dec-21
Dr Income tax expense $12.50
Cr To Income taxes payable ($44*25%) $11.00
Cr To Deferred tax liability ($6*25%) $1.50
(To record income tax expense)
2. Calculation to determine What is Ameenâs 2021 net income?
Ameen's 2021 net income = $50 - $12.50
Ameen's 2021 net income = $37.50 million
Therefore Ameen's 2021 net income is $37.50 million
The pre-tax accounting income is $44 million and the income tax payable amount is $11 million.
What do you mean by Pre-tax accounting income?Pre-tax revenue is the company's income left over after all operating costs, including interest and depreciation, have been deducted from sales or income, but before deducted income tax.
Pre-tax profits provide insight into the financial performance of a company prior to tax impact.
Calculation of taxable income for 2021:
a)
[tex]\rm\,Taxable \,Income = \\Pre-Tax \; Accounting \; Income + (Excess \;of Book Depreciation \;over \; tax \; depreciation)\\\\\rm\,Taxable \,Income = 50 + (2 - 8)\\\\\rm\,Taxable \,Income = \$44 \;Million\\\\Income\,tax\, Payable = 44 \times 25\%\\\\Income\,tax\, Payable = \$11 Million[/tex]
Journal entry to record Ameena's 2021 income taxes is attached below.
b) Ameena's net income will be :
[tex]\rm\,Ameen's \; 2021 \;net \; income = \$50 - \$12.50\\\Ameen's \; 2021 \;net \; income = $37.50 \rm\,million[/tex]
Hence, The pre-tax accounting income is $44 million and the income tax payable amount is $11 million.
To learn more about pre-tax accounting income, refer:
https://brainly.com/question/26891310
If contribution margin is $220000, sales is $400000, and net income is $180000, then variable and fixed expenses are:________
Answer:
Total variable cost= $180,000
Fixed costs= $40,000
Explanation:
Giving the following information:
Contribution margin= $220,000
Sales= $400,000
Net income= $180,000
The contribution margin formula is as follow:
Total Contribution margin= sales - total variable cost
Therefore, we need to isolate the total variable cost and replace the variable with the data:
Total variable cost= sales - total contribution margin
Total variable cost= 400,000 - 220,000
Total variable cost= $180,000
Finally, the fixed costs:
Fixed costs= total contribution margin - net income
Fixed costs= 220,000 - 180,000
Fixed costs= $40,000
An investment advisor has a client base composed of high net worth individuals. In her personal portfolio, the advisor has an investment in Torex, a company that has developed software to speed up internet browsing. She has thoroughly researched Torex and believes the company is financially strong yet currently significantly undervalued. According to the GARP Code of Conduct, the investment advisor may:
Answer: c. recommend Torex, but she must disclose her investment in Torex to the client.
Explanation:
The investment advisor is allowed to recommend Torex to her clients as she believes that it is financially sound and undervalued which means that there is a chance for her clients to earn a good enough return.
She must however disclose to them that she has an investment in the company so that they can decide on their own if this may have biased her decision towards the company as a viable investment option.
As the operations manager, you prefer to keep a constant workforce and production level, absorbing variations in demand through inventory excesses and shortages. Demand not met is carried over to the following month. Assuming you currently have 23 workers, what is the shortage cost for May
Answer:
Shortage cost for May is $71,000
Explanation:
The expected demand for the month of May is 5000 units.
Shortages for month are carried to next month.
Shortage cost is $10 per month.
(Working days per month x hrs/day x # of workers)
20 days * 8 hours * 23 workers = 3680
Jan : 3680 - 3500 = +180
Feb : 3680 + 180 - 4500 = -640
Mar : 3680 - 640 -6000 = -2980
Apr : 3680 - 2980 -6500 = 5780
May : 3680 - 5780 -5000 = 7100
Accurate Metal Company sold 36,500 units of its product at a price of $340 per unit. Total variable cost per unit is $179, consisting of $172 in variable production cost and $7 in variable selling and administrative cost. Compute the manufacturing margin for the company under variable costing.
Answer: $6,132,000
Explanation:
The manufacturing margin for the company under variable costing will use the variable production costs only as these are the variable costs incurred during manufacturing:
Variable manufacturing margin = ( Sales price - Variable cost per unit) * number of units
= (340 - 172) * 36,500
= 168 * 36,500
= $6,132,000
Russell Company has acquired a building with a loan that requires payments of $22,500 every six months for 4 years. The annual interest rate on the loan is 10%. What is the present value of the building? (PV of $1, FV of $1, PVA of $1, and FVA of $1) (Use appropriate factor(s) from the tables provided.)
Answer:
$145,422
Explanation:
n = 4 * 2 = 8 periods
i = 10% / 2 = 5%
Present value of the building = $22,500 * PVAF(8%, 5%)
Present value of the building = $22,500 * 6.4632
Present value of the building = $145,422
The following information is available for Lock-Tite Company, which produces special-order security products and uses a job order costing system. April 30 May 31 Inventories Raw materials $ 33,000 $ 32,000 Work in process 9,400 20,800 Finished goods 50,000 34,600 Activities and information for May Raw materials purchases (paid with cash) 171,000 Factory payroll (paid with cash) 250,000 Factory overhead Indirect materials 12,000 Indirect labor 57,500 Other overhead costs 110,000 Sales (received in cash) 1,700,000 Predetermined overhead rate based on direct labor cost 55 % Exercise 19-7 Cost flows in a job order costing system LO P1, P2, P3, P4 Compute the following amounts for the month of May using T-accounts. Cost of direct materials used. Cost of direct labor used. Cost of goods manufactured. Cost of goods sold\.\* Gross profit. Overapplied or underapplied overhead. *Do not consider any underapplied or overapplied overhead.
Answer:
Lock-Tite Company
Cost of direct materials used = $160,000
Cost of direct labor used = $192,500 ($250,000 - $57,500)
Cost of goods manufactured = $446,975
Cost of goods sold = $462,375
* Gross profit = $1,237,625
Overapplied or underapplied overhead = $73,625
*Do not consider any underapplied or overapplied overhead.
Explanation:
a) Data and Calculations:
Inventories April 30 May 31
Raw materials $ 33,000 $ 32,000
Work in process 9,400 20,800
Finished goods 50,000 34,600
Activities and information for May:
Raw materials purchases (paid with cash) 171,000
Factory payroll (paid with cash) 250,000
Factory overhead:
Indirect materials 12,000
Indirect labor 57,500
Other overhead costs 110,000
Sales (received in cash) 1,700,000
Predetermined overhead rate based on direct labor cost 55 %
T-accounts:
Raw materials
Date Account Titles Debit Credit
April 30 Inventory balance $ 33,000
May Cash 171,000
May Factory overhead $12,000
May Work in process 160,000
May 31 Inventory balance $ 32,000
Work in process
Date Account Titles Debit Credit
April 30 Inventory balance $ 9,400
May Raw materials 160,000
Factory payroll 192,500
Factory overhead 105,875
Finished goods $446,975
May 31 Inventory balance $ 20,800
Finished goods
Date Account Titles Debit Credit
April 30 Inventory balance $ 50,000
May Work in process 446,975
May Cost of goods sold $462,375
May 31 Inventory balance $ 34,600
Factory overhead
Date Account Titles Debit Credit
May Raw materials 12,000
Payroll 57,500
Other expenses 110,000
May Work in process $105,875
May Underapplied overhead 73,625
Sales revenue = $1,700,000
Cost of goods sold (462,375)
Gross profit $1,237,625
A company's ratio of liabilities to stockholders' equity decreased from 0.6 to 0.4 during the year. This is a.an improvement in the margin of safety for creditors. b.an indication that the company's level of debt is increasing. c.a negative change in the company's financial position. d.an improvement in the company's net income.
Answer:
A)an improvement in the margin of safety for creditors.
Explanation:
Margin of safety can be regarded as a principle of investing whereby an investor only make purchases of securities during the time when the market price is below their intrinsic value significantly. In a case whereby
the market price of a security falls below ones estimation of its intrinsic value significantly, then the difference that exist there is regarded as margin of safety. Margin of safety can as well be regarded as financial ratio which gives measurement of the amount of sales which exceed the break-even point. Most times investors may create a margin of safety with regards to their own risk preferences, purchasing of securities in a time that there is a difference give room for an investment to be made with minimal downside risk.
For instance, company's ratio of liabilities to stockholders' equity decreased from 0.6 to 0.4 during the year.
World-Tour Co. has just now paid a dividend of $2.83 per share (Div0); its dividends are expected to grow at a constant rate of 6 percent per year forever. If the required rate of return on the stock is 16 percent, what is the current value of the stock, after paying the dividend
Answer:
the current value of the stock is $30
Explanation:
The computation of the current value of the stock is given below:
Price of stock today is
= Dividend per share × (1 + growth rate) ÷ (required rate of return - growth rate)
= $2.83 × (1 + 0.06) ÷ (0.16 - 0.06)
= $2.9998 ÷ 0.10
= $29.9980
= $30
Hence, the current value of the stock is $30
Bravo inc owns 20,000 of the 40,000 outstanding shares of bello, inc. common stock. During 2021, Bello earns 1,200,000 and pays cash dividends of 960,000. IF the beginning balance in the investment account was 750,000, the balance at December 31, 2021 should be:_______
Answer:
the ending balance of the investment account is $870,000
Explanation:
The computation of the ending balance of the investment account is shown below:
= Beginning balane + [(earns - dividend) × (owns shares ÷total shares)]
= $750,000 + [($1,200,000 - $960,000) × (20,000 ÷ 40,000)]
= $750,000 + $120,000
= $870,000
Hence, the ending balance of the investment account is $870,000
The four main tools of monetary policy are Group of answer choices changes in government expenditures, the reserve ratio, the federal funds rate, and the discount rate tax-rate changes, changes in government expenditures, open-market operations, and interest on excess reserves the discount rate, the reserve ratio, interest on excess reserves, and open-market operations. tax-rate changes, the discount rate, open-market operations, and the federal funds rate
Answer:
the discount rate, the reserve ratio, interest on excess reserves, and open-market operations
Explanation:
Central banks applied the monetary policy in order to manage the money supply for the economy of the country. In this the central bank increase or decrease the value of the currency and the credit made in circulation by keeping an effort on an inflation, growth & employment
The four main tools with respective to the monetary policy are represented above
The following data relate to the direct materials cost for the production of 2,200 automobile tires:
Actual: 55,500 lbs. at $1.7 per lb.
Standard: 56,600 lbs. at $1.65 per lb.
Required:
Determine the direct materials price variance, direct materials quantity variance, and total direct materials cost variance.
Answer and Explanation:
The computation is given below:
Direct Material price variance is
= ($1.70 per lb - $1.65 per lb) × 55,500 lbs.
= $2,775 Unfavorable
Direct Material quantity variance is
= (55,500 lbs. - 56,600 lbs.) × $1.65 per lb
= $-1,815 Favorable
Total Direct Materials Cost Varianceis
= Actual Materials Cost - Standard Materials Cost
= (55,500 lbs. × $1.70 per lb) - (56,600 lbs. × $1.65 per lb)
= $94,350 - $93,390
= $960 Unfavorable
If the United States passed a tariff on imported steel which of the following would directly benefit?
A. Foreign steal companies
B. All Americans would benefit because of the lower price for steel
C. Businesses which imports steel
D. American steel producers
businesses which imports steel C
Differences in net operating income between absorption costing and variable costing are due to the ______. Multiple choice question. amount of sales revenue reported timing of when fixed manufacturing overhead is expensed amount of selling and administrative cost expensed format of the income statements
Answer:
timing of when fixed manufacturing overhead is expensed
Explanation:
When there is the difference with respective to the net operating income under the absorption costing and the variable costing so it is because of the timing when the fixed manufacturing overhead should be incurred or expensed
So as per the given situation, second option is correct
And, the same should be relevant
You plan to purchase a $100,000 house using a 30-year mortgage obtained from your local credit union. The mortgage rate offered to you is 7.25 percent. You will make a down payment of 20 percent of the purchase price. Calculate your monthly payments on this mortgage.
Answer:
$545.74
Explanation:
The actual mortgage is the purchase price minus the down payment, based on the mortgage amount, the monthly payment can be determined using a financial calculator as shown below:
N=360(number of monthly payments in 30 years=30*12=360)
I/Y=7.25/12(monthly interest rate without the "%" sign)
PV=-80000($100,000-20%*$100,000=$80000)
FV=0(after all required payments , the balance of the mortgage balance would be zero)
CPT
PMT=$545.74
As CFO, one of your responsibilities is to maximize the profits obtained from your organization. How can the strategy review, evaluation and control practices used within your organization be used to assure this outcome
Answer:
The chief financial officer of an organization has the main objectives of maximizing the profits obtained from the organization. This is a task of great responsibility, and one that requires the joint efforts of the entire organizational system.
It is therefore necessary that there is constant management of the strategy, including review, evaluation and control, to monitor how the planned short and long-term action plans are being effective to achieve the financial objectives of a company.
A CFO's functions are to achieve total quality, through the improvement of organizational processes in the micro and macro environment of the company, aligning the company's strategy to achieve better results. Some essential actions of a CFO are to increase sales, reduce operating costs, achieve economies of scale, improve marketing, etc.
MC Qu. 93 A company has established... A company has established 5 pounds of Material J at $3 per pound as the standard for the material in its Product Z. The company has just produced 1,500 units of this product, using 7,700 pounds of Material J that cost $21,780.The direct materials price variance is:
Answer:
$255 Favorable
Explanation:
Direct material price variance = (Actual price - Budgeted price) * Actual quantity
Direct material price variance = ($21,780/7,700 - $3) * 7,700
Direct material price variance = ($2.83 - $3) * 1,500
Direct material price variance = $0.17 * 1,500
Direct material price variance = $255 Favorable
Altoon Manufacturing's records were partially destroyed in a flood. The company does not know what sales have been for the year, but it does know all sales were on account. Also, the beginning accounts receivable balance was $19,000, and its accounts receivable balance at the time of the flood was $25,000. From the beginning of the year until the flood, cash collections from credit customers were $158,000. Given this information, what are Altoon Manufacturing's sales for the year until the flood?
a. $164,000
b. $114,000
c. $202,000
d. $209,000
e. $189,000
Answer:
a. $164,000
Explanation:
The computation of the Altoon Manufacturing's sales for the year until the flood is given below:
= Cash collections + ending receivables - opening receivables
= $158,000 + $25,000 - $19,000
= $164,000
hence, the Altoon Manufacturing's sales for the year until the flood is $164,000
Therefore the first option is correct
Demand for a specific design of dinning sets has been fairly large in the past several years and Statewide Furnishings, Inc. usually orders new dinning sets 10 times a year. It is estimated that the ordering cost is $400 per order. The carrying cost is $50 per unit per year. Furthermore, State Wide Furnishings, Inc. has estimated that the stock out cost is $120 per unit per year. Based on forecast, the annual demand is 600 units. State Wide Furnishings, Inc. has 350 working days in a year and its lead time is 14 working days.
Assume shortage is allowed and the store manager is sure that shortages will not become lost sales, determine the annual ordering cost.
a. 592.82
b. 1472.01
c. 2051.28
d. 4116.11
e. None of the above
Answer:
e. None of the above
Explanation:
Annual demand, D = 600 units
Ordering cost, S = $400
Holding cost, H = $50
Economic order quantity without stock-out = SQRT(2*D*S/H)
Economic order quantity without stock-out = SQRT(2*600*400/50)
Economic order quantity without stock-out = 98
Total annual ordering cost = (D/Q)*S + (Q/2)*H
Total annual ordering cost = (600/98)*$400 + (98/2)*$50
Total annual ordering cost = $2,448.97 + $2,450
Total annual ordering cost = $4,898.97
Whose unemployment rates are commonly higher in the U.S. economy: whites, nonwhites, young, middle aged, college graduates, or high school graduates?
A. high school graduates
B. young
C. middle aged
Answer:
Non whites, young and high school gradates.
Explanation:
The US unemployment rate is about 5.9% and has decreased form 6.9% in 2020. Most of unemployment people are the youth and non whites and school pass outs.Jefferson uses the percent of sales method of estimating uncollectible receivables. Based on past history, 2% of credit sales are expected to be uncollectible. Sales for the current year are $5,550,000. Which of the following is correct?
a. Allowance for Doubtful Accounts will be credited.
b. Cash will be debited.
c. Accounts Receivable will be debited.
d. Bad Debt Expense will be credited.
Answer:
a. Allowance for Doubtful Accounts will be credited.
Explanation:
Since 2% of credit sales are expected to be UNCOLLECTIBLE in which the Sales amount for the current year are $5,550,000 which therefore means that $111,000 calculated as (.02 x $5,550,000) will be Allowance for Doubtful Accounts amount that will be credited.
Therefore ALLOWANCE FOR DOUBTFUL ACCOUNTS can be defined as the amount that tend to reduce Accout Receivable amount shown on a company or organization balance sheet.
Our home construction company still buys nails in 15-pound boxes but now we use an average of 3495 boxes a year. Preparing an order and receiving a shipment of nails involves a cost of $1.45 per order. Annual carrying costs are $0.7 per bag. What will be their total cost of ordering and carrying the nails
Answer:
Home Construction Company
Their total cost of ordering and carrying the nails is:
= $2,488.55.
Explanation:
a) Data and Calculations:
Cost of ordering and receiving a shipment of nails = $1.45 per order
Annual carrying costs per bag = $0.7
Annual average boxes = 3,495
EOQ = square root of (2 * 3,495 * $1.45)/$0.7
= square root of 120
Number of orders = 29 (3,495/120)
Ordering costs = $42.05 ($1.45 * 29)
Carrying costs = $2,446.50 ($0.7 * 3,495)
Total cost of ordering and carrying the nails = $2,488.55 ($42.05 + $2,446.50)
ctivity-Based Costing (ABC) is useful in: Select one: A. Breakdown COGS into DL, DM, and FOH B. Breaking down FOH more accurately into cost drivers C. Breaking down FOH into one overhead rate D. Breaking down DL and DM by product
Answer:
B. Breaking down FOH more accurately into cost drivers
Explanation:
In the case of activity based costing, the activity of the fixed cost should be breakdown based on the number of activity pools while the fixed cost should be breakdown as per the cost drivers. Also, there is more than one overhead rate existed. In addition to this, it is the method for distribution of the overhead with those firms who is able to used it
Therefore the option b is correct
Inacio Corporation uses the weighted-average method in its process costing system. Data concerning the first processing department for the most recent month are listed below: Beginning work in process inventory: Units in beginning work in process inventory 2,300 Materials costs $ 14,400 Conversion costs $ 6,500 Percent complete with respect to materials 75% Percent complete with respect to conversion 20% Units started into production during the month 11,000 Units transferred to the next department during the month 9,900 Materials costs added during the month $ 173,500 Conversion costs added during the month $ 243,500 Ending work in process inventory: Units in ending work in process inventory 3,400 Percent complete with respect to materials 90% Percent complete with respect to conversion 30% The cost per equivalent unit for materials for the month in the first processing department is closest to: Multiple Choice $12.21 $13.15 $11.90 $14.50
Answer:
Inacio Corporation
The cost per equivalent unit for materials for the month in the first processing department is closest to:
= $14.50
Explanation:
a) Data and Calculations:
Units Materials Conversion
Beginning work in process 2,300 $14,400 $6,500
Percentage of completion 75% 20%
Units started during the month 11,000
Total units available 13,300
Units transferred to the next 9,900 100% 100%
Ending work in process 3,400 90% 30%
Costs added during the month $173,500 $243,500
Equivalent units of production:
Units Materials Conversion
Units transferred to the next 9,900 9,900 (100%) 9,900 (100%)
Ending work in process 3,400 3,060 (90%) 1,020 (30%)
Equivalent units of production 12,960 10,920
Costs of production: Materials Conversion
Beginning work in process $14,400 $6,500
Costs added during the month 173,500 243,500
Total costs of production $187,900 $250,000
Cost per equivalent unit: Materials Conversion
Total costs of production $187,900 $250,000
Equivalent units of production 12,960 10,920
Cost per equivalent unit $14.50 $22.89
Management uses a voucher system to help control and monitor cash payments. Identify the key documents that are part of a voucher system of control.
a. Invoice
b. Outstanding check
c. Purchase order
d. Voucher
Answer:
a. Invoice
c. Purchase order
d. Voucher
Explanation:
Voucher system can be regareded s method used in authorization of the the disbursement of cash. In this system, A voucher will be filled out, this filled voucher will give amount to
be paid for as well as account number to be charged. After the approval of the voucher , there will be authorization of the disbursement system so that payment can be issued.
It should be noted that the Management uses a voucher system to help control and monitor cash payments. the key documents that are part of a voucher system of control are;
✓Invoice
✓ Purchase order
✓Voucher
The Most Brilliant Professor Mullen Company's past experience indicates that 60% of its credit sales are collected in the month of sale, 30% in the next month, and 5% in the second month after the sale; the remainder (5%) is never collected. Budgeted credit sales were: January $240,000 February 144,000 March 360,000 The cash inflow (CRJ) in the month of March is expected to be A) $271,200. B) $205,200. C) $216,000. D) $259,200.
Answer: A. $271,200
Explanation:
Cash inflow in March will be:
= (60% * March sales) + (30% * February sales) + (5% * January sales)
= (60% * 360,000) + (30% * 144,000) + (5% * 240,000)
= 216,000 + 43,200 + 12,000
= $271,200
Swifty Corporation manufactures a product with a unit variable cost of $100 and a unit sales price of $176. Fixed manufacturing costs were $480000 when 10000 units were produced and sold. The company has a one-time opportunity to sell an additional 1000 units at $145 each in a foreign market which would not affect its present sales. If the company has sufficient capacity to produce the additional units, acceptance of the special order would affect net income as follows:
Income would increase by $45000.
Income would increase by $3000.
Income would increase by $145000.
Income would decrease by $3000.
Coronado Industries is using the target cost approach on a new product. Information gathered so far reveals:
Expected annual sales 350000 units
Desired profit per unit $0.35
Target cost $168000
What is the target selling price per unit?
a. $0.48
b. $0.35
c. $0.70
d. $0.83
Answer:
1. Swifty Corporation
If the company has sufficient capacity to produce the additional units, acceptance of the special order would affect net income as follows:
Income would increase by $45000.
2. Coronado Industries:
The target selling price per unit is:
d. $0.83
Explanation:
a) Data and Calculations:
Swifty Corporation:
Variable cost per unit = $100
Sales price per unit = $176
Contribution margin per unit = $76 ($176 - $100)
Fixed manufacturing costs = $480,000
Production and sales units = 10,000 units
Revenue from special order = $145,000 ($145 * 1,000)
Variable costs for 1,000 units 100,000 ($100 * 1,000)
Contribution margin $45,000 ($145,000 - $100,000)
Fixed costs for special order $0
Net income = $45,000
Coronado Industries:
Expected annual sales 350,000 units
Desired profit per unit $0.35
Target cost $168,000
Desired profit = $122,500 (350,000 * $0.35)
Total sales revenue = $290,500 ($168,000 + $122,500)
Target selling price per unit = $0.83 ($290,500/350,000)
If the market index subsequently rises by 8% and Ford’s stock price rises by 7%, what is the abnormal change in Ford’s stock price? (Negative value should be indicated by a minus sign. Do not round intermediate calculations. Round your answer to 1 decimal place.)
Answer:
-1.9%.
Explanation:
The computation of the abnormal change in the stock price of ford should be given below:
Given that
The return on the market is 8%.
So, the forecast monthly return for Ford is
= 0.10% + (1.1 × 8%)
= 8.9%.
And, the Ford’s actual return was 7%,
So,
the abnormal return be
= 7% - 8.9%
= -1.9%.
Dake Corporation's relevant range of activity is 3,200 units to 8,000 units. When it produces and sells 5,600 units, its average costs per unit are as follows:
Average Cost per Unit
Direct materials $ 6.55
Direct labor $ 3.50
Variable manufacturing overhead $ 1.30
Fixed manufacturing overhead $ 3.00
Fixed selling expense $ 0.90
Fixed administrative expense $ 0.60
Sales commissions $ 0.70
Variable administrative expense $ 0.60
If 4,600 units are produced, the total amount of direct manufacturing cost incurred is closest to:____.
A) $63,560.
B) $16,800.
C) $87,640.
D) $80,360.
Answer:
the direct manufacturing cost is $46,230
Explanation:
The computation of the direct manufacturing cost is given below;
= (direct material per unit + direct labor per unit) × number of units produced
= ($6.55 + $3.50) × 4,600 units
= $46,230
hence, the direct manufacturing cost is $46,230
This is the answer but the same is not provided in the given options
The same should be considered
Vera PLC uses exponential smoothing with trend to forecast monthly sales. At the end of September, Small Industries PLC hopes to forecast sales for October. The trend through August has been 500 additional unit sales per month (Tt-1). Average sales have been 1800 units per month (St-1). The demand for September was 1780 units (AL). Vera PLC uses alpha (a) - 0.2 and Beta (B)-0.3. Note: This Forecasting Question relates to Questions 65-67. Following the first stage of the trend-adjusted exponential smoothing method, smooth the level of the series and calculate St for Vera PLC. (retain your answer and calculation for:________
a) 1985
b) 2563
c) 2196
d) 2144
e) 2373
Answer:
Option c (2196) is the right solution.
Explanation:
Given:
[tex]\alpha = 0.2[/tex]
[tex]\beta=0.3[/tex]
[tex]A_t=1780[/tex]
By using the formula, we get
⇒ [tex]S_t=\alpha\times A_t+(1-\alpha)\times (S_{t-1}+T_{t-1})[/tex]
By substituting the values, we get
[tex]=0.2\times 1780 + (1 - 0.2)\times (1800+500)[/tex]
[tex]=356+0.8\times 2300[/tex]
[tex]=356+1840[/tex]
[tex]=2196[/tex]
