what is equal to 1 hector area

Explanation:

With rise in temperature, the length of the material increases which decreases its stiffness. Thus, we can say that with rise in the temperature, the Young's modulus decreases.

Answer:

Action and reaction are equal but act in opposite directions

Answer:

Newton’s third law of motion states that “ for every action there is always an equal and opposite reaction.”

Explanation:

If body A exerts a force on body B, then body B will exert an equal and opposite force on body A. It is also called action reaction force. They have equal magnitude but are opposite in direction.

Answer:

in such condition the gravitational force will increase 16 times

Please find attached photograph for your answer.

We know

[tex]\boxed{\sf K.E=\dfrac{1}{2}mv^2}[/tex]

[tex]\\ \sf\longmapsto K.E=\dfrac{1}{2}\times 2\times 40^2[/tex]

[tex]\\ \sf\longmapsto K.E=40^2[/tex]

[tex]\\ \sf\longmapsto K.E=1600J[/tex]

Refer to the attachment

Answer:

Furthermore, the Pythagorean theorem works when the two added vectors are at right angles to one another - such as for adding a north vector and an east vector.

Answer:

Set for what? did U finish the question?

Answer:

If the force applied on the object is in the direction of its motion, the speed of the object increases. If the force is applied in the direction opposite to the direction of motion, then it results in a decrease in the speed of the object.

Explanation:

the temperature will determine the kinetic energy or degree of freedom of the molecules of matter.

if the temperature is high, the kinetic energy of the molecules increase which may cause a change of state into a gas which has molecules of high kinetic energy. this shows that temperature is a measure of the kinetic energy of the molecules.

Answer:

80 to 150 years

Explanation:

hope I helped

Answer: 80-150 years and some over 150 years

Explanation:

There are different types of Tortoise in earth everyone eith different lifespan. So basically normal ones have 80-150 while some other like giant tortoise even have over 150 years.

please click thanks and mark brainliest if you like :)

Answer:

It is not solid under normal conditions

Mercury differs from other metals as It is not solid under normal conditions. It is the only metal that is liquid at room temperature, therefore the correct answer is option C

Anything which has mass and occupies spaces is known as matter, mainly there are four states of matter solid liquid gases, and plasma.

These different states of matter have different characteristics according to which they vary their volume and shape.

Because it is not solid under normal circumstances, mercury is different from other metals. Because it is the only metal that is liquid at room temperature,

Thus the correct answer is option C

Learn more about the matter here

brainly.com/question/9402776

#SPJ2

Explanation:

The slum children in an elementary school look pathetic. Their hairs are uncombed. They look pale and shabby. They are undernourished and diseased

Answer:

Velocity is the rate of change of displacement.

Answer:

  96 m

Explanation:

The average velocity over those 4 seconds is the velocity after 2 seconds:

  30 m/s -(2 s)(3.0 m/s^2) = 24 m/s

The displacement is the product of this average velocity and the duration of the acceleration:

  d = (24 m/s)(4 s) = 96 m

The boat covered 96 m while being accelerated.

Answer:

1) 1,157*10⁻⁵ day; 2) 604800 sec.; 3) 0.5 m.

Explanation:

1) 1 second into one day:

one day consists of 24 hours, it means 24*3600=86400 seconds. Then 1 second is 1/86400 day or 1,157*10⁻⁵ day.

2) 1 week into seconds:

1 day consists of 3600*24=86400 seconds, then the week is 7*86400=604800 seconds.

3) 50 cm into meter:

100 cm is one meter, then 50 cm is 0.5 meter.

PS. note, there is not the only way to perform conversion.

1) Two major factors, mass and distance, affect the strength of gravitational force on an object.

2) Most common factors that affect gravity are mass of the body, distance from centers, shape of bodies,etc. Gravity is a binding force, always acting to bind any material closure and closure inwards. If we think this way, then gravity is maximum at its centre and decreases slowly away from its centre.

hope it helps you

mark my answer as brainlist and follow

have a nice day

Answer:

1 True

2 False

3 False

4 True

5 True

Hope that helps you

please mark brainliest

please follow

Answer:

A. true

B. false

C. false

D. ?????

Question 1; The elongation of the steel is approximately 0.3123 mm

Question 2; The percentage the density of water increased in the deepest

ocean is approximately 6.4%

The strategy of obtaining the above solution is presented as follows;

Que. 1; The given parameters are;

The mass of the suspended block, m = 10 kg

The length of the steel, l = 2 m

The radius of the steel, r = 1 mm = 1 × 10⁻³ m

The modulus of elasticity of steel, E = 200 GPa = 200 × 10⁹ Pa

The stress, σ, on the steel due to the mass, m, is given as follows;

[tex]\mathbf{\sigma = \dfrac{F}{A}}[/tex]

Where;

F = The force acting on the steel = The weight of the mass

A = The cross sectional area of the steel = π·r²

∴ F = 10 kg × 9.81 m/s² = 98.1 N

A = π × (1 × 10⁻³)² = 3.14159 × 10⁻⁶ m²

Therefore;

σ = 98.1 N/(3.14159 × 10⁻⁶ m²) ≈ 31,226,226.2 Pa

We have;

[tex]\mathbf{ E = \dfrac{\sigma}{\epsilon}}[/tex]

From which we have;

[tex]\epsilon = \dfrac{\sigma}{E}[/tex]

Where;

∈ = The tensile strain = Δl/l

Δl = The elongation of the steel

Therefore;

∈ = 31,226,226.2/(200 × 10^9) = 0.00015613113

∴ Δl = 0.00015613113 × 2 m = 0.00031226226 m = 0.31226226 mm

The elongation of the steel, Δl = 0.31226226 mm ≈ 0.3123 mm

Question 2

The given parameters are;

The change in pressure per unit depth, Δp = 1.0 atm per 10 meters

The depth of the ocean = 12 km = 12,000 m

The compressibility = 5.0 × 10⁻⁵

The formula for compressibility, C, is presented as follows;

[tex]C = \dfrac{1}{V} \times \dfrac{\partial V}{\partial P}[/tex]

The change in pressure, [tex]\partial P[/tex] = 12,000 m × 1.0 atm/(10 m) = 1,200 atm

For a unit volume, V = 1 m³

We get;

[tex]5 \times 10^{-5} = \dfrac{1}{1} \times \dfrac{\partial V}{1,200}[/tex]

[tex]\partial V[/tex] = 5 × 10⁻⁵ m³/(atm) × 1,200 = 0.06 m³

The volume occupied 1 m³ at 12,000 km depth = V - [tex]\partial V[/tex]

∴ The volume occupied 1 m³ at 12,000 km depth = 1 m³ - 0.06 m³ = 0.94 m³

The percentage density increase, [tex]\partial[/tex]ρ% = (m/0.94 - m/1)/m/1 × 100

∴ (1/0.94 - 1/1)/1/1 × 100 ≈ 6.4%

The percentage increase in density  ≈ 6.4%

Learn more about elongation here;

https://brainly.com/question/14835957

https://brainly.com/question/18746977

Notice that

B = 4i + 6j - 2k = 2 (2i + 3j - k) = 2A

so both vectors point in the same direction and the angle between them is (A) 0°.

Answer:

Unconscious wish fulfillment

Explanation:

Unconscious wish fulfillment

(In the unconscious wish fulfillment theory, the actual wishes of the dreamer that are threatening to the dreamer's conscious awareness are disguised.)

Explanation:

p = F /A

F = P×A

F = 30,000 Pa / 0.1 m²

F = 300,000 N

Answer:Boiling

Explanation: If a liquid is heated the particles are given more energy and move faster and faster expanding the liquid. The most energetic particles at the surface escape from the surface of the liquid as a vapour as it gets warmer.

Doppler frequency, the other car hear before they pass each other is 668.68 Hz.

Frequency is the number of occurrences of a repeating event per unit of time.

The Doppler effect is the change in frequency of a wave in relation to an observer who is moving relative to the wave source.

According to the Doppler Effect, the frequency observed is

  [tex]fo=fs\frac{v+v_{o} }{v-v_{s} }[/tex]

[tex]f_{o}=595\frac{343+20 }{343-20 }\\f_{o} = 668.68 Hz[/tex]

To know more about Doppler Effect here

https://brainly.com/question/15318474

#SPJ2

Explanation:

The answer is mentioned above.

Hope it helps.

Answer:

Gravitational force will be 16 times more.

Explanation:

we know;

Gravitational force (F) = (Gm1m2)/d^2

when mass of each is doubled and distance between them is halved;

F= (G2m1×2m2)/(d/2)^2

=(4Gm1m2)/(d^2/4)

=4×4(Gm1m2)/d^2

=16(Gm1m2)/d^2

=16F

Answer:

Advantages of Hydroelectric Energy

1 Renewable

Hydroelectric energy is renewable. This means that we cannot use up. However, there’s only a limited number of suitable reservoirs where hydroelectric power plants can be built and even less places where such projects are profitable.

2 Green

Generating electricity with hydro energy is not polluting itself. The only pollution occurs during the construction of these massive power plants.

3 Reliable

Hydroelectricity is very reliable energy. There are very little fluctuations in terms of the electric power that is being by the plants, unless a different output is desired. Countries that have large resources of hydropower use hydroelectricity as a base load energy source. As long as there is water in the magazines electricity can be generated.

4 Flexible

As previously mentioned, adjusting water flow and output of electricity is easy. At times where power consumption is low, water flow is reduced and the magazine levels are being conserved for times when the power consumption is high.

5 Safe

Compared to among others fossil fuels and nuclear energy, hydroelectricity is much safer. There is no fuel involved (other than water that is).

Answer:

gagaggagagagagooo

Explanation:

gagagagagagagagaoooo

Answer:

0m/s

Explanation:

When the ball hits the ground, it then moves with uniform motion and when an object is in uniform motion, the speed is 0m/s