Answer:
as it 8s based upon to fundamental units distance and Time
g Suppose that the Red cart has a mass of 500 grams, and the blue cart has a mass of 250 grams, and they are connected with a spring of spring constant 100 N/m. If the Red cart is held, and the Blue cart is pulled away with a force 19.2 N, what will be the force on the Red cart (write your answer in newtons, magnitude only)
Answer:
19.2 N
Explanation:
After any transients dissipate, all forces must balance. The red cart never moves.
The strength of the magnetic field of a magnet
A. Remains the same at any distance from a magnet.
B. Decreases as distance from the magnet decreases.
C. Decreases as distance from the magnet increases.
D. Increases as distance from the magnet increases.
Answer:
C
Explanation:
further away = less strength because the magnetic field is weaker
a youthful person run at 7km/h in a north- west direction across the derk of a ship in which is streaming due east at 40 km/h .ifind the velocity of the boy relative to the Sea
ii,And the velocity of the sea relative to the boy
Answer:
velocity of ship wrt sea= 7i∧
velocity of women on deck= 40j∧
velocity of women relative to sea will be resultant of above two velocoties,
7i∧ + 40j∧ magnitude is
square root (7 x 7 + 40x40)
=√49+1600
=√1612
=40.14 m/s
The magnetic flux that passes through one turn of a 8-turn coil of wire changes to 5.0 Wb from 8.0 Wb in a time of 0.098 s. The average induced current in the coil is 140 A. What is the resistance of the wire
Answer:
Resistance is 1.75 ohms
Explanation:
Magnetic flux:
[tex]{ \phi{ = NBA}}[/tex]
N is number of turns, N = 8
B is magnetic flux
A is area of projection.
From faradays law:
[tex]E = - \frac{ \triangle \phi}{t} [/tex]
where E is the Electro motive force.
But E = IR
where I is current and R is resistance:
[tex]IR = \frac{( \phi_{1} - \phi _{2}) }{t} \\ \\ 140 \times R = \frac{8 \times (8 - 5)}{0.098} \\ \\ R = \frac{24}{0.098 \times 140} \\ \\ resistance = 1.75 \: ohms[/tex]
the number of significant figures in the measurement 4.300×10^5 km are
Answer:
6
Explanation
Any numbers in scientific notation are considered significant. For example, 4.300 x 10-4 has 4 significant figures.
Answer From Gauth Math
Một vật được ném lên trên theo phương thẳng đứng. Người quan sát
thấy vật đó đi qua vị trí có độ cao h hai lần và khoảng thời gian giữa hai lần đó là
t. Tìm vận tốc ban đầu và thời gian chuyển động của vật từ lúc ném đến khi vật
rơi về vị trí ban đầu.
Answer:
Language -English plz I cant understand
3 of 3 : please help got an extra day for a test and i don’t get this (must show work) points and brainliest!
Explanation:
[tex]qV = \frac{1}{2}mv^2[/tex]
Multiply both sides by 2 and then divide by m to get
[tex]\dfrac{2qV}{m} = v^2[/tex]
Take the square root of both sides to get
[tex]v = \sqrt{\dfrac{2qV}{m}}[/tex]
A block of mass 2 kg is launched by compressing a spring of force constant 1200 N/m. The block slides on a frictionless surface, up a 1 meter tall ramp, then it enters a region of rough surface. It comes to a stop after traveling 3 meters over the rough surface. The coefficient of kinetic friction between the block and the rough surface is 0.40.
Required:
a. How many forces end up doing work on the block from release to stop?
b. What is the total non-conservative work done on the block?
c. What is the change in the spring potential energy of the block?
Answer:
zzyibgsdwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwe
Explanation:
A roller coaster uses 800 000 J of energy to get to the top of the first hill. During this climb, it gains 500 000 J of potential energy and pauses (velocity = 0) for a fraction of a second at the very top before heading down the other side.
a) Draw a sankey diagram for a roller coaster's climb.
A roller coaster uses 800 000 J of energy to get to the top of the first hill. During this climb, it gains 500 000 J of potential energy and pauses for a fraction of a second at the very top before heading down the other side. At the top of the hill total, the kinetic energy of the roller coaster would be zero as the velocity is zero at the top of the hill, therefore the total mechanical energy is only because of potential energy.
What is mechanical energy?Mechanical energy is the combination of all the energy in motion represented by total kinetic energy and the total stored energy in the system which is represented by total potential energy.
The expression for total mechanical energy is as follows
ME= KE+PE
As total mechanical energy is the sum of all the kinetic as well as potential energy stored in the system.As given in the problem a roller coaster uses 800000 J of energy to get to the top of the first hill. During this climb, it gains 500 000 J of potential energy which means 300000 J of energy is lost in the frictional energy while climbing the hill,
Thus at the top of the hill, the total energy of the roller coasters is only due to the potential energy.
Learn more about mechanical energy from here brainly.com/question/12319302
#SPJ2
A 207-kg merry-go-round in the shape of a uniform, solid, horizontal disk of radius 1.50 m is set in motion by wrapping a rope about the rim of the disk and pulling on the rope. What constant force would have to be exerted on the rope to bring the merry-go-round from rest to an angular speed of 0.750 rev/s in 2.00 s
Answer:
366 N
Explanation:
τ = Iα
FR = ½mR²α
F = ½mR(Δω/t)
F = ½(207)(1.50)(0.75)(2π) /2.00
F = 365.79919...
Trong thực nghiệm nhiễu xạ qua 1 khe hẹp, bề rộng khe là 2.10-5 m, màn quan sát đặt cách khe 0,5 m. Chiếu ánh sáng có bước sóng 480 nm xuyên qua khe và thấy có nền nhiễu xạ trên màn quan sát. Tính bề rộng của vân sáng liền kề vân sáng trung tâm.
Answer:
tyygggghgtyhyrdfgyyyhjjillbxsrfvgygvnjj
Explanation:
cffczhxucuxoyitxohvojcdivbjv ohxc
A 0.3 kg mass attached to a 1.5 m long string is whirled in a horizontal circle at a speed of 6.0 m/s. What is the tension in the string? (neglect gfavity)
Answer:
Hi I hope this is correct!
Explanation:
You can use this formula to solve this question T = mv^2/R
m = 0.3 kg , v = 6.0 m/s , R = 1.5 m
T = (0.3 kg)(6.0 m/s)^2 / 1.5 m
= 7.2 Newtons
Hope this helps! Best of luck <3
Mention the importance of occupation??
Answer:
ln the contemporary time , farming can be considered as comparitively important occupation as it can feed the population , So agriculture is having a greater importance than any other occupation.
In the Bohr model of the hydrogen atom, an electron in the 3rd excited state moves at a speed of 2.43 105 m/s in a circular path of radius 4.76 10-10 m. What is the effective current associated with this orbiting electron
Answer:
Current =,charge / time
Charge = e = 1.6E-19 coulombs
t = T time for 1 revolution (period)
v = S / T = distance traveled in 1 revolution / time for 1 revolution
T = S / v = 2 pi * 4.76E-10 / 2.43E5 = 1.23E-14
I = Q / T = 1.6E-19 / 1.23E-14 = 1.30E-5
RADIOWAVES of constant amplitude can be generated with
1) FET
2) filter
3)rectifier
4)oscillator
Answer:
4) oscillator
Explanation:
4) oscillator
Suppose an electron is trapped within a small region and the uncertainty in its position is 24.0 x 10-15 m. What is the minimum uncertainty in the electron's momentum
Answer:
Uncertainty in position (∆x) = 24 × 10⁻¹⁵ mUncertainty in momentum (∆P) = ?Planck's constant (h) = 6.26 × 10⁻³⁴ Js[tex]\longrightarrow \: \: \sf\Delta x .\Delta p = \dfrac{h}{4\pi} [/tex]
[tex]\longrightarrow \: \: \sf24 \times {10}^{ - 15} .\Delta p = \dfrac{6.26 \times {10}^{ - 34}} {4 \times \frac{22}{7} } [/tex]
[tex]\longrightarrow \: \: \sf24 \times {10}^{ - 15} .\Delta p = \dfrac{6.26 \times {10}^{ - 34}} { \frac{88}{7} } [/tex]
[tex]\longrightarrow \: \: \sf24 \times {10}^{ - 15} .\Delta p = \dfrac{6.26 \times {10}^{ - 34} \times 7} { 8 } [/tex]
[tex]\longrightarrow \: \: \sf\Delta p = \dfrac{43.82 \times {10}^{ - 34} } { 8 \times 24 \times {10}^{ - 15} } [/tex]
[tex]\longrightarrow \: \: \sf\Delta p = \dfrac{43.82 \times {10}^{ - 34} } { 192 \times {10}^{ - 15} } [/tex]
[tex]\longrightarrow \: \: \sf\Delta p = \dfrac{43.82 \times {10}^{ - 34} \times {10}^{15} } { 192} [/tex]
[tex]\longrightarrow \: \: \sf\Delta p = \dfrac{43.82 \times {10}^{ -19} } { 192} [/tex]
[tex]\longrightarrow \: \: \sf\Delta p = \dfrac{4382 \times {10}^{ - 2} \times {10}^{ -19} } { 192} [/tex]
[tex]\longrightarrow \: \: \sf\Delta p = \dfrac{4382 \times {10}^{ - 21} } { 192} [/tex]
[tex]\longrightarrow \: \: \sf\Delta p = 22.822\times {10}^{ - 21} [/tex]
[tex]\longrightarrow \: \: \sf\Delta p = 2.2822 \times {10}^{1} \times {10}^{ - 21} [/tex]
[tex]\longrightarrow \: \: \underline{ \boxed{ \red{ \bf\Delta p = 2.2822 \times {10}^{ - 20} \: kg/ms}}}[/tex]
what is the value of x if x-36=5?
Answer:
Therefore, the value of x is 41
Explanation:
x=5+36
x=41
Present the ways to observe interference patterns on thin films. Why the thickness of thin films should be in scale of wavelength?
the president of The proposal ahr stay Sheba SBR Abba and and I send svrvs you svrvs
A load of 25 kg is applied to the lower end and of a steal wire of length 25 m and thickness 3.0mm .The other end of wire is suspeded from a rigid support calculate strain and stress produced in the wire
Answer:
the weight of the wire + 25kg
Explanation:
which of the following can not happen when a light ray strikes a new medium
Answer:
amplification
Explanation:
reflection can happen
some amount of lighr get absorbed
something gets refracted
but amplification cant
A circular parallel-plate capacitor whose plates have a radius of 25 cm is being charged with a current of 1.3 A. What is the magnetic field 11 cm from the center of the plates
The magnetic field at 11 cm from the center of the plates is 2.364 x 10⁻⁷ T.
Given;
radius of the circular plate, d = 25 cm = 0.25 m
current in the plate, I = 1.3 A
distance from the center of the circular plate, r = 11 cm = 0.11 m
To find:
magnetic field (B)The magnetic field from the given distance is calculated as from Biot Savart equation:
[tex]B = \frac{\mu_o I}{2\pi r} \\\\where;\\\\\mu_o \ is \ permeability \ of \ free \ space \ 4\pi \times 10^{-7} \ T.m/A\\\\B = \frac{(4\pi \times 10^{-7} ) \times (1.3)}{2\pi \times 0.11} \\\\B = 2.364 \ \times 10^{-6} \ T[/tex]
Therefore, the magnetic field 11 cm from the center of the plates is 2.364 x 10⁻⁷ T.
Learn more here: https://brainly.com/question/17035710
The speed of a sound wave
A. Depends on wavelength.
B. Depends on the medium.
C. Depends on amplitude.
D. None of the above.
Answer:
B) the medium
Explanation:
B. Depends on the medium.
Differences between LED and CFL bulb..
Explanation:
CFL bulbs were made to take the place of incandescent bulbs, which generate light as a result of heat. ... LED (light-emitting diode) is a type of bulb that produces light using a narrow band of wavelengths. LED lighting is more energy efficient than CFL bulb.
if C is The vector sum of A and B C = A + B What must be true about The directions and magnitudes of A and B if C=A+B? What must be tre about the directions and magnitudes of A and B if C=0?
Check attached photo
Check attached photo
Answer:
Explanation:
1. If C = A + B then the lines A and B may have the same magnitude or they may not. The direction of A for example may be northwest ↖️ and the direction of B must be south ⬇️ because the arrow of A and the point of B must connect. Then C’s direction is west ⬅️ because it shouldn’t be as equilibrium.
2. If C = 0 t means the force is at equilibrium. That means all forces add up to zero. A’s direction for example may be northeast ↗️ and the direction of B may be south ⬇️ and the direction of C must be west if it has to be at equilibrium.
The magnitude of A and B must be equal
According to the conservation of mechanical energy, the kinetic energy before plus the kinetic energy after equals the
potential energy before plus the potential energy after.
True
False
Answer:
False
Explanation:
The conservation of mechanical energy says that the kinetic energy before plus the potential energy before equals the kinetic energy after plus the potential energy after.
A rock with a mass of 16 kilograms is put aboard an airplane in New York City and flown to Boston. How much work does the gravitational field of the earth do on the rock
The work done by the gravitational field of the earth on the rock is 9.998 x 10⁸ J.
The given parameter include:
the mass of the object, m₁ = 16 kg
Note: the mass of the earth, m₂ = 5.972 x 10²⁴ kg
The work done by the gravitational field of the earth is given as;Work done = gravitational force (F) x radius of the earth (R)
[tex]Work \ done = \frac{Gm_1m_2}{R^2} \times R\\\\Work \ done = \frac{Gm_1m_2}{R} \\\\where;\\\\R \ is \ the \ radius \ of \ the \ earth = 6,378 \ km = 6,378,000 \ m\\\\G \ is \ the \ universal \ gravitation \ constant = 6.674 \times 10^{-11} Nm^2/kg^2\ \\\\Work \ done = \frac{(6.674 \times 10^{-11} ) \times (5.972\times 10^{24}) \times (16)}{6,378,000 } \\\\Work \ done = 9.998 \times 10^{8} \ J[/tex]
Therefore, the work done by the gravitational field of the earth on the rock is 9.998 x 10⁸ J.
To learn more about work done by gravitational field of the earth visit: https://brainly.com/question/13934028
Help! xoxo thank you
Like charges repel and opposite charges attract.
On her camping trip, Penelope was in charge of collecting firewood. The firewood she found had a mass of 120 g and a volume of 480 cm3. What is the density of the firewood? Explain the steps you took to solve this problem.
Answer:
D = .25g/cm³
Explanation:
D = m/V
D = 120g/480cm³
D = .25g/cm³
coin 1 is thrown upward from the top of 100m tower with a speed of 15m/s. coin 2 is dropped from the top of the tower 2.0second later. assume g is 10m/s. how far below the top of the tower des coin 1 pass coin 2
The height below the tower at which coin 1 pass coin 2 is 89.04 m.
The given parameters:
height of the tower, h = 100 m
initial velocity of coin 1, v = 15 m/s
time spent in air by coin 1 before coin 2 was dropped = 2s
To find:
the height below the tower at which coin 1 passes coin 2Find the maximum height attained by coin 1 before falling to the ground:
[tex]v^2 = u^2 - 2gh\\\\where;\\\\v \ is \ the \ final \ velocity \ of \ coin \ 1 \ at \ maximum \ height, v \ = 0\\\\0 = (15^2) - 2(10)h\\\\20h = 225\\\\h = \frac{225}{20} \\\\h = 11.25 \ m[/tex]
Find the time taken for coin 1 to fall to the ground:
Total height of coin 1 above the ground, H = 11.25 m + 100 m = 111.25 m
[tex]t = \sqrt{\frac{2H}{g} } \\\\t = \sqrt{\frac{2\times 111.25}{10} } \\\\t = 4.72 \ s[/tex]
But the time taken for the coin 1 to reach 11.25 m above the tower:
[tex]t_1 = \sqrt{\frac{2h}{g} } \\\\t_1 = \sqrt{\frac{2\times 11.25}{10} } \\\\t_1 = 1.5 \ s[/tex]
Total time spent by coin 1 before reaching ground with respect to coin 2:
time = (1.5 s + 4.72 s) - 2 s
time = 4.22 s
Note: the 2 s was subtracted to keep both coins at a fair starting time below the tower.
Find the total time taken for coin 2 to fall to the ground:
Height of coin 2 above the ground = 100 m
Total time taken by coin 2 before falling to the ground is calculated as:
[tex]t_2 = \sqrt{\frac{2(100)}{10} } \\\\t_2 = 4.47s[/tex]
The time at which coin 1 will pass coin 2 is 4.22 s.
Find the height below the tower when the time is 4.22 s.
[tex]h = \frac{1}{2} (10)(4.22)^2\\\\h = 89.04 \ m[/tex]
Thus, the height below the tower at which coin 1 pass coin 2 is 89.04 m.
Learn more here: https://brainly.com/question/18943273
When you exert 75 N on a jack to lift a 6000 N car, what is the jack’s actual mechanical advantage? Show your work.
Answer:
80
Explanation:
the mechanical advantage is the ratio of the load to the effort so it doesn't have units.to calculate it you use the formula
mechanical advantage=load/effort
in this case the load is 6000N and the effort is 75N
Ma=6000/75
=80
I hope this helps
