Answer:
True but mostly false.
Explanation:
If you squint enough at night, you'd be able to see it. Otherwise it's not really possible.
Find the change in kinetic energy if if a 0. 65 kg fish leaping to the right a 15 m/s
The value of change in kinetic energy, when fish with mass 0. 65 kg is leaping to the right at 15 m/s, is 93.1 J.
What is kinetic energy?Kinetic energy is a type of energy, which a body is posses due to its motion. The kinetic energy of a body can be found with the following formula,
[tex]KE=\dfrac{1}{2}mv^2[/tex]
Here, (m) is the mass of the body, and (v) is the speed of the body.
When the two objects collides, then the initial collision of the two body is equal to the final collision of two bodies by the law of conservation of momentum.
[tex]m_1u_1 + m_2u_2 = (m_1+m_2)v[/tex]
Here, (m) is the mass, (u) is initial velocity before collision, v is final velocity after collision and (subscript 1,2) are used for fish 1 and 2.
The mass of the first fish is 0. 65 kg. This fish leaping to the right at 15.0 m/s collides inelastically with another fish with mass 0.950 kg leaping to the left at 13.5 m/s. Put the values,
[tex]m_1u_1 + m_2u_2 = (m_1+m_2)v\\0.65\times15 +0.95\times(-13.5) = (0.65 + 0.95)\times v[/tex]
The value of initial velocity of the second fish is taken negative as it is leaping to the left.
[tex]0.65\times15 +0.95\times(-13.5) = (0.65 + 0.95)\times v\\v=-\dfrac{3.075}{1.6}\\v=-1.9219\rm\; m/s[/tex]
This is the final velocity. Now to find the change in kinetic energy use the formula of kinetic energy,
[tex]\Delta KE=\dfrac{1}{2}(0.65)(12-(-1.9219))^2\\\Delta KE=93.1\rm\; J[/tex]
Thus, the value of change in kinetic energy, when fish with mass 0. 65 kg is leaping to the right at 15 m/s, is 93.1 J.
Learn more about the kinetic energy here;
https://brainly.com/question/25959744
#SPJ4
Mr. Galonski just discovered that he has been turned into a superhero and is now one hundred times more acidic than water! He then found out that he has an arch-nemesis named Baron von Base who has a pH of 11. Using this information, who would be furthest from neutral on the pH scale and therefore "stronger"?
pH water = 7 = [H⁺] = 10⁻⁷
Mr. Galonski one hundred times more acidic than water = 100 times more H⁺ = 10⁻⁵ ⇒ pH = 5
Baron von Base has a pH of 11
The furthest from neutral (pH=7) on the pH scale = Baron von Base
At what point of a projectile motion, acceleration and velocity are perpendicular to each other?
Answer:
At the topmost point where the velocity has only horizontal component whereas the acceleration is vertical.
Explanation:
There is only a horizontal component of velocity at the ap3x of the projectile, and acceleration is vertically downwards owing to gravitation, therefore velocity and acceleration are perpendicular to one another.
What question is maya most likely trying to answer? how does the type of material used in the core affect the strength of an electromagnet? how does the number of loops of wire affect the strength of an electromagnet? how does the speed at which an iron bar is removed from wire loops affect the strength of an electromagnet? how does the thickness of the wire affect the strength of an electromagnet?
The question is maya most likely trying to answer is, how does the thickness of the wire affect the strength of an electromagnet?
What is effect of thickness of wire on strength of electromagnet?
From the experimental set-up by maya, we can determine the effect of thickness of wire on strength of electromagnet.
R ∝ 1/A
where;
R is resistance of the wiresA is area of the wires (from thickness or radius of the wire)As the thickness of the wire increases, the area of the wire increases and the resistance of the wire will decrease. As the resistance of the wire decreases, the current flowing in the wire increases as well.
Thus, the increase in the thickness of a wires increases, the strength of an electromagnet.
Learn more about strength of an electromagnet here: https://brainly.com/question/2331156
#SPJ4
Answer:
A
Explanation:
During a car accident, a 125 kg driver is moving at 31 m/s and in 1.5 seconds is brought to rest by an inflating air bag. what is the magnitude of the change in momentum of the driver? 4.0 kg • meters per second 21 kg • meters per second 47 kg • meters per second 3900 kg • meters per second
The magnitude of the change in momentum of the driver is 3900kgm/s.
Hence option D) 3900 kg • meters per second is the correct answer.
What is Momentum?Momentum is simply the product of the mass of an object and its velocity.
Its is expressed as;
P = m × v
Where m is the mass of the object and v is its velocity.
Given the data in the question;
Mass of the driver m = 125kgVelocity v = 31m/sTime elapsed t = 1.5sWe substitute the given values into the expression above to determine the initial momentum of the driver before he was brought to rest.
P initial = m × v
P initial = 125kg × 31m/s
P initial = 3875 kgm/s ≈ 3900kgm/s
Now, as the driver is brought to rest, final velocity becomes zero
P final = 125kg × 0
P final = 0
This means that the change in momentum of the driver is his initial momentum which is 3900kgm/s.
Therefore, the magnitude of the change in momentum of the driver is 3900kgm/s.
Hence option D) 3900 kg • meters per second is the correct answer.
Learn more about momentum here: brainly.com/question/14952164
#SPJ4
Answer:
D for edge
Explanation:
GO GO GO TRUST ME
Q7 A fishing vessel travels a distance of 6 nautical miles at a speed of 8 knots.
It then anchors for one hour, before travelling a further 5 nautical miles, in
45 minutes, to the next fishing ground. It anchors for 30 minutes before
sailing 1 hour back to port.
1 knot = 1 nautical mile per hour,
12
[a] Draw the distance-time graph for
the fishing vessel.
10
[b] What was the vessel's average
speed for the entire journey?
6
Distance from shore (nautical miles)
4
2
0
1
4
2 3
Time (hours)
The vessel's average speed for the entire journey will be 5.86 knots. The area of the distance-time graph shows the velocity.
What is distance?Distance is a numerical representation of the distance between two objects or locations.
Distance can refer to a physical length or an estimate based on other factors in physics or common use. |AB| is a symbol for the distance between two points A and B.
The given data in the problem is;
Distance travelled 1 (D₁)= 6 nautical miles
Velocity (V₁) 8 knots.
Time (T₁)=
Distance travelled 2 (D₂)=5 nautical miles,
Time taken(T₂)=45 minutes=0.75 hour
Time taken(T₃)=30 minutes
Time for anchor 1 (t₁)=1 hour
Time for anchor 2(t₂)=0.5 hour
Time to sailing back to port(t₄) = 1 hour
The time for the first phase of motion;
[tex]\rm d = v\times t \\\\ t_1= \frac{D_1}{v} \\\\ t_1= \frac{6}{8} \\\\ t_1= 0.75 \ houe[/tex]
The average speed is found as;
[tex]\rm V_{avg}= \frac{Total \ distance }{Total \ time } \\\\ \rm V_{avg}= \frac{6+5+6+5}{0.75+0.5+1+0.5+1} \\\\ V_{avg}=5.866 \ knots[/tex]
Hence, the vessel's average speed for the entire journey will be 5.86 knots.
To learn more about the distance, refer to the link;
https://brainly.com/question/26711747
#SPJ1
What are the properties of a good conductor
The Properties of good conductor are given below:
Explanation:
1.It posses very low resistance or specific resistance.
2.It posses more conductance and there by conducts electricity readily through it.
3.It is a good conductor of heat.
4.It is highly resistance to corrosion by liquid.
5.It must be malleable and ductile.
6.It must be flexible.
7.It should not react with climatic conditions.
8.It can be drawn in very fine wires.
O.A. (Opinionated Answer): What is your take on dimensions and altered realities. Where do you think youd find them? do you believe in them? and how would time shift or alter?
you cant what done is done unless you start over. well think of a game it is its own dimension created by man for our entertainment but its not perfect there are glitches and modifications. but you are not the main character only one is and He gives us our own controler our brain. but if your athiest then ask me in the comments. i can explain both ways
Answer:
The world as we know it has three dimensions of space—length, width, and depth—and one dimension of time. But there's the mind-bending possibility that many more dimensions exist out there. According to string theory, one of the leading physics models of the last half-century, the universe operates with 10 dimensions. A dimension arises when a force is generated that allows movement into a new domain. Yes, I personally do believe in them for reasons I can't explain. Dimensional shifts were a phenomenon whereby an object or person is transported from one location to another via folded-space transport or shifted to a parallel universe on a different dimensional plane.
Explanation:
Have a great rest of your day
#TheWizzer
What do Newton's three laws state?
In real number multiplication, if uv1=uv2 and u does not equal zero we can cancel out u and conclude that v1=v2. Does the same rule hold for the dot product?
The conclusion v₁=v₂ can not be made. Let u=(1,1,1),v₁=(2,3,-5),v₂=(4,-1,-3). The dot product of u.v₁=uv₂ is satisfied,but v₁≠v₂.The correct answer is c.
What is dot product?The dot product, also known as the scalar product, is an algebraic operation that yields a single integer from two equal-length sequences of numbers.
The dot product of two vectors' Cartesian coordinates is commonly used in Euclidean geometry.
Because there may be more than the 1 vectors satisfying the expression.
[tex]\rm uv_1 = 1 \times 2 +1 \times 3 +1 \times(-5)=0[/tex]
[tex]\rm uv_2= 4-1-3 =0[/tex]
The v₁ is not found equal to the v₂.
The conclusion v₁=v₂ can not be made. Let u=(1,1,1),v₁=(2,3,-5),v₂=(4,-1,-3). The dot product of u.v₁=uv₂ is satisfied,but v₁≠v₂.The correct answer is c.
Hence, the correct answer is c.
To learn more about the dot product, refer to the link;
https://brainly.com/question/26550859
#SPJ4
Voltage is only produced when the wire is moving but not when the magnet is moving.
True
False
True,Voltage is only produced when the wire is moving but not when the magnet is moving.
What is electromagnetism ?The physical interplay of electric charges, magnetic moments, and the electromagnetic field is known as electromagnetism.
The electromagnetic field can be static, moving slowly, or forming waves. Electromagnetic waves are commonly referred to as light and are subject to optics laws.
True,Voltage is only produced when the wire is moving but not when the magnet is moving.
To learn more about the electromagnetism, refer to the link;
https://brainly.com/question/3427992
#SPJ1
An object has a velocity of 8 m/s and a kinetic energy of 480 J. What is the mass of the object? (Formula: ) 7. 5 kg 15 kg 60 kg 120 kg.
Answer:
15 kg
Explanation:
KE = 1/2 * m * v² ⇒ m = (2*KE) / v²
m = (2*480) / 8²
m=15 kg
An electron and a 0.0500-kg bullet each have a velocity of magnitude 510 m/s, accurate to within 0.0100%. Within what lower limit could we determine the position of each object along the direction of the velocity
The lower limit that could be used to determine the position of each object along the direction of the velocity is 1.136 x 10⁻³ m.
Uncertainty in the position of the electronThe uncertainty in the position of the electron is calculated as follows;
[tex]\Delta x = \frac{h}{4\pi m\Delta v}[/tex]
where;
h is Planck's constant = 6.63 x 10⁻³⁴ Jsm is mass of electronΔv uncertainty in velocity = (0.01 x 10⁻²) x 510 = 0.051 m/s[tex]\Delta x = \frac{6.63 \times 10^{-34} }{4\pi \times 9.11 \times 10^{-31} \times 0.051} \\\\\Delta x = 1.136 \times 10^{-3} \ m[/tex]
Thus, the lower limit that could be used to determine the position of each object along the direction of the velocity is 1.136 x 10⁻³ m.
Learn more about uncertainty in position here: https://brainly.com/question/1970053
#SPJ1
a seismic wave has a measured wavelength of 0.50 km. its frequency is 27 hz. what is the velocity of the wave?
Answer:V=13500m/s
As
V=fλ
Where v is velocity, f is frequency and λ is the wavelength
f=27hz or 27/s
λ=0.50km=0.50*1000m=500m
Putting given values in the formula
V=(27/s)*(500m)
V=13500m/sss
If the volume of a container of gas is reduced, what will happen to the pressure inside the container?.
Answer:
The pressure of the gas will increase
Explanation:
When gas is put into a container, for example, a balloon, the gas expands to fill the space it can occupy. Since gas is not a solid or a liquid, its particles are all over the place - they are constantly moving and vibrating. As such, when too much gas is blown into a balloon, it will pop. So, when the volume of the container decreases, the pressure of the gas will increase the smaller it gets. Vice versa, the greater the space, the less pressure that will be present in the container.
What is the force advantage of the direction changing pulley shown below?
Select one:
a. Less than 1.
b. 1.
c. Greater than 1.
d. Greater than 10.
The force advantage of the direction changing pulley shown is 1. The correct option is b.
What is force advantage?Force is the mechanical physical quantity. The force advantage is equivalent to the mechanical advantage equal to the ratio of output to the input force.
In the single fixed pulley, there is only one rope segment that pulls up on the load, so,
The force advantage is
F.A = 50 N / 50 N = 1
Thus, the force advantage of the direction changing pulley shown is 1. The correct option is b.
Learn more about force advantage.
https://brainly.com/question/16558799
#SPJ1
What amount of charge passes through a 3.0 amp television in 1.3 hours?
Answer:
60
Explanation
Dont judge me but I convert 1.3 hours to 78 minutes, then divide with 3.0 and we end up with 60C
The amount of charge that passes through a 3.0 amp television in 1.3 hours would be 14040 Coulombs.
What is an electric charge?Charged material experiences a force when it is exposed to an electromagnetic field due to the physical property of electric charge. You can have a positive or negative electric charge.
I = Q / T
As given in the problem, we have to find out what amount of charge passes through a 3.0 amp television in 1.3 hours.
Let us first convert the time period of hours into seconds
1 hour = 3600 seconds
1.3 hours = 1.3 × 3600 seconds
= 4680 seconds
By using the above relation between electric current and electric charge
and by substituting the respective values of the charge and the time period
I = Q / T
3 = Q / 4680
Q = 3 × 4680
= 14040 Coulombs
Thus, the amount of charge that passes through a 3.0 amp television in 1.3 hours would be 14040 Coulombs.
To learn more about an electric charge from here, refer to the link given below ;
brainly.com/question/8163163
#SPJ5
The capacitor can withstand a peak voltage of 670 v. If the voltage source operates at the resonance frequency
The value of maximum voltage, when the capacitor can withstand a peak voltage of 670 v is 47.6 volts.
What is resonance frequency?Resonance frequency is the natural frequency of an particle or object. At this frequency, the object tries to vibrate at higher amplitude. It can be calculated with the following formula:
[tex]f=\dfrac{1}{2\pi LC}[/tex]
Here, L is the induction and C is the capacitance.
Let for an L-R-C circuit, the value of resistance is 400 ohm, induction is 0.380 Haney and capacitance is 1.20×10⁻² μF.
Put the values in above formula,
[tex]f=\dfrac{1}{2\pi(0.380)(1.20\times10^{-8})}\\f=2356.8\rm\; Hz[/tex]
The capacitor can withstand a peak voltage of 670 v. Use the following formula to find the value of current as,
[tex]I=2\pi fC\times Vc\\I=2\pi (2356.8)(1.20\times10^{-8})\times 670\\I=0.119\rm\; A[/tex]
The value of resistance is 400 ohms. Thus, the voltage is,
[tex]V=IR\\V=(0.119)(400)\\V=47.6\rm\; V[/tex]
Thus, the value of maximum voltage, when the capacitor can withstand a peak voltage of 670 v is 47.6 volts.
Learn more about the resonance frequency here:
https://brainly.com/question/3292140
#SPJ4
anyone could answer this question
1. How should you begin an exercise routine?
by increasing endurance
by eating
Hard right from the start
By stretching
2. True or False. You have to go to the gym to get exercise.
True
False
3. Which of the following is an advantage to exercising?
building stronger muscles and bones
increasing blood pressure
increasing body fat
4. Which of the following is an example of exercise?
riding your bike
watching basketball
playing chesss
Answer:
1. By streching
2. false
3. building stronger muscles and bones
4. riding your bike
Explanation:
The routine of exercise begins with the usual basic step of stretching the body.
What is meant by exercise ?An essential component of a healthy lifestyle is exercise. Exercise can help you cope with stress and prevent health issues while also enhancing energy and strength. It can also help you control your appetite and keep your weight in a healthy range.
Here,
1. The routine of exercise begins with the usual basic step of stretching the body.
2. People don't have to necessarily go to the gym to get exercise, because exercise includes the activities from the basic one to difficult methods. So, you can do some kind of exercise at the home itself. So, the statement is false.
3. An advantage to exercising is building stronger muscles and bones.
4. Riding your bike is an example of exercise.
Hence,
The routine of exercise begins with the usual basic step of stretching the body.
To learn more about exercise, click:
https://brainly.com/question/13128077
#SPJ2
If the plant produces electric energy at the rate of 1. 5 gw , how much exhaust heat is discharged per hour?
The amount of exhaust heat discharged per hour from the plant which produces electric energy at the rate of 1. 5 gw, is 9.36×10¹⁹ J/h.
How to calculate the heat discharged per hour?The heat is discharged per hour is equal to the different of total power and actual power.
The plant produces electric energy at the rate of 1. 5 gw. Let assume the efficiency of this power plant is 64% between the temperature of 660 degree C to 330 degree Celsius.
Thus, the maximum efficiency is,
[tex]\eta_{max}=1-\dfrac{660+273}{330+273}\\\eta_{max}=0.55[/tex]
The total power is,
[tex]P_t=\dfrac{P_A}{\eta_{max}\times0.64}\\P_t=\dfrac{1.5}{0.55\times0.64}\\P_t=4.26\rm\; GW[/tex]
Thus, the heat discharged per hour is,
[tex]Q=4.26-1.5\\Q=2.76\text{GW}\\[/tex]
Multiply the value with 3600 to convert it in s/h,
[tex]Q=2.76\times10^9\times3600\text{ J/h}\\Q=9.36\times10^{19}\text{ J/h}\\[/tex]
Thus, the amount of exhaust heat discharged per hour from the plant which produces electric energy at the rate of 1. 5 gw, is 9.36×10¹⁹ J/h.
Learn more about the heat discharged per hour here;
https://brainly.com/question/19666326
#SPJ4
1.Some objects fall faster than other objects due to ____ _________________. If there is no ____ _________________, then all objects will fall at the same rate.
2.
a. How do parachutes use air resistance to help skydivers land safely (page 3)?
b. Which has more air resistance: a flat sheet of paper or a paper airplane (feel free to test it out!)? Explain your answer.
Answer:
number 1 is ( Some objects fall faster than other objects due to air resistance . If there is no air resistance , then all objects will fall at the same rate.) number two is (How do parachutes use air resistance to help skydivers land safely (page 3)? The air resistance overwhelms the doward force of gravity.) Explanation:
What is inertia?
a. a type of kinetic friction
b. the normal force on ah incline
c. the tendency of an object to maintain its state of motion
d. the reaction to an action force
Explain why Earth is not a perfect sphere?
Earth surfaces are not all the same.
Earth's surface is smooth.
The Earth's shape bulges in the equator.
The Earth's atmosphere has affected its shape
The brain can be best described as which classification of the body?
o bone
o organ
ogland
O muscle
What happens when two
electrons get close
together?
Answer:
when two electrons are in close proximity Each atom's electron begins to detect the proton of the other atom. As a result, it is attracted to not just its own proton, but also the proton of the other atom.
d. We should always measure the least count of tool before experimenting. Discuss the importance of calculating least count of tools before experimenting.
The count of the number of tools is fundamental because it allows us to design a suitable experimental procedure.
What is an experimental procedure?An experimental procedure is a step of the scientific method based on a process to validate or reject our working hypothesis.
The experimental procedure needs to have into account the different tools required for the experiment to be carried out by the researcher.
In conclusion, the count of the number of tools is fundamental because it allows us to design a suitable experimental procedure.
Learn more about the experimental procedure here:
https://brainly.com/question/17274244
#SPJ1
help me please.....●_●
Answer:
Length -> meter
Mass -> kilogram
Time -> second
g for gram
mg for milligram
t for time
μm for micrometer
ms for millisecond
300cm = 3m
500g = 0.5kg
1500m = 1.5km
250ms = 0.25s
3.65×10^4g = 36.5kg
0.318 cm. What is the ideal mechanical advantage?
The ideal mechanical advantage will be 8.017. The ideal mechanical advantage value may be grater than the actual value of mechanical advantage.
What is mechanical advantage ?
Mechanical advantage is a measure of the ratio of output force to input force in a system, it is used to obtained efficiency of forces in levers and pulley.
The ideal mechanical advantage is found as;
[tex]\rm IMA = \frac{d \pi}{l} \\\\ \rm IMA = \frac{0.812 \times \pi}{0.318} \\\\ IMA=8.017[/tex]
The ideal mechanical advantage will be 8.017.
To learn more about the mechanical advantage, refer to the link;
https://brainly.com/question/7638820
#SPJ1
Dust, accumulated at the time of the formation of the solar system is sometimes preserved in asteroids, meteoroids, and meteorites. what are these pockets of early solar system materials called
The dust, accumulated at the time of the formation of the solar system that are preserved in asteroids, meteoroids, and meteorites are called chondrules.
What is the solar system?The solar system is composed of the earth and the planets. The solar system was formed millions of years ago.
The dust, accumulated at the time of the formation of the solar system that are preserved in asteroids, meteoroids, and meteorites are called chondrules.
Learn more about meteoroids:https://brainly.com/question/1939309
#SPJ1
