Rays of light coming from the sun (a very distant object) are near and parallel to the principal axis of a concave mirror. After reflecting from the mirror, where will the rays cross each other at a single point?
The rays __________
a. will not cross each other after reflecting from a concave mirror.
b. will cross at the center of curvature.
c. will cross at the point where the principal axis intersects the mirror.
d. will cross at the focal point. will cross at a point beyond the center of curvature.

Answer: Patsy is eager to learn how to bake a cake but does not know how to do it.

Explanation: i picked this and it is correct, you’re welcome:)

Explanation:

Energy utilization focuses on technologies that can lead to new and potentially more efficient ways of using electricity in residential, commercial and industrial settings—as well as in the transportation sector

Answer:

The probability that Susan turns 85 years old is 45,436/97,825= 0.4644.

Explanation:

Edmentum

Answer:

45,436/97,825= 0.4644.

Answer:

Explanation:

The air enters their lungs at the same pressure as the water at that depth.

If they hold their breath as they rise to atmospheric pressure, the expanding volume of air (due to decreasing pressure) trapped in their lungs will hyperextend the alveoli in their lungs, likely tearing blood lines and risking death by drowning in their own blood.

Answer: 2.9kg

let mass be=m ; F=15N; Sin(theta)=32°;g =9.8kgm/s^2.

represent the mass. By resolving forces, we have:

F=mgSin(theta)

15N=mgSin(32°)

m=15N/g×Sin(32°)

m=15N/9.8m/s^2÷Sin(32°)

=2.888kg2.888

≈2.9kg

Mass on a string will be 2.9 kg

Object at equilibrium is the condition in which all the forces are balanced and the object will not accelerate and net force on the object will be zero

given

mass = ?

Force = F = 15N

angle from the vertical = 32°

according to newton' s law of equation, because of equilibrium condition

mg sin(32°) - F =0

m(9.8) (0.5299) - 15 =0

5.19302 m = 15

m= 15/5.19302 = 2.8885 = 2.9 kg

Mass on a string will be 2.9 kg

learn more about equilibrium

https://brainly.com/question/13764087?referrer=searchResults

#SPJ3

Answer:

First Kepler law states that Each planet describes an ellipsoidal motion about the sun as its single focus.

Second Kepler law states that An imaginary line joining a planet to the Sun sweeps out equal areas in equal time intervals.

Third Kepler law states that The squares of period of revolution of the planet around the sun are proportional to the cubes of mean distance between the planet and the sun.

Weightlessness is the condition where the body has zero gravity ( its acceleration is equal to the acceleration due to gravity )

[tex].[/tex]

Kepler's law states that the Sun serves as the planet's center of gravity while they travel in elliptical orbits.

Each planet describes an ellipsoidal motion around the sun as its sole focus, according to the first Kepler law.

According to the second Kepler law, an imaginary line between a planet and the Sun sweeps out equivalent areas at equivalent times.

According to the third Kepler law, the squares of a planet's period of revolution around the sun are proportional to the cubes of the planet's mean distance from the sun.

When the body is weightless, there is no gravitational pull on it ( its acceleration is equal to the acceleration due to gravity).

Therefore, the Sun serves as the planet's center of gravity while they travel in elliptical orbits, which is described by Kepler's law.

To learn more about Kepler's motion, refer to the link:

https://brainly.com/question/1608361

#SPJ2

Explanation:

It took [tex]t_1 =1.5\:\text{s}[/tex] for the sound to reach the 1st wall and at the same time time, the same sound took [tex]t_2 = 2.5\:\text{s}[/tex] to reach the 2nd wall. Assuming that the sound travels at 343 m/s, then let [tex]x_1[/tex] be the distance of the person to the 1st wall and [tex]x_2[/tex] be the distance to the 2nd wall. So the distance between the walls X is

[tex]X = x_1 + x_2 = v_st_1 + v_st_2 = v_s(t_1 + t_2)[/tex]

[tex]\:\:\:\:\:= (343\:\text{m/s})(4.0\:\text{s}) = 1372\:\text{m}[/tex]

Answer:

photo

Explanation:

All these people perform similar duties due to their similar profession.

All these People are the astronomers so they used various instruments that are present at their time in order to study the heavenly bodies such as stars and planets present in the sky. They also analyze their findings with the help of researches and experiments. They also develop theories that are based on personal observations and tested the theories of other astronomers in order to verify their theories.

https://brainly.com/question/24373447

Answer:

I think the answer is A...I'm not sure

Explanation:

A=(6,4)

B=(-2,-1)

A-B=(6-(-2)),(4-(-1))

=(6+2),(4+1)

=(8,5)

Answer:

[tex]6-(-2)=[/tex]

[tex]6+2[/tex]

[tex]=8[/tex]

[tex]4-\left(-1\right)[/tex]

[tex]=4+1[/tex]

[tex]=5[/tex]

[tex](8,5)[/tex]

[tex]\textbf{OAmalOHopeO}[/tex]

Answer: hertz

Explanation:

Wavelength is also measured in metres ( ) - it is a length after all. The frequency ( ) of a wave is the number of waves passing a point in a certain time. We normally use a time of one second, so this gives frequency the unit hertz ( ), since one hertz is equal to one wave per second.

Answer:

The number of waves that pass a particular point in a unit of time.

Explanation:

The frequency of a wave describes the number of waves that pass a particular point in a unit of time. The frequency is inversely proportional to the period of the wave, which is the time required for one full wave cycle to complete.

PF

The resistance R = 20 Ω

The capacitance C = 106.1 μF

The current, I is 2.773 A at 56.31°.

The phase angle of the between the current and the voltage is 56.31° leading.

Since the impedance Z = 20 - j30 Ω, the resistance, R is the real part of the impedance. So R = ReZ = 20 Ω

So, the resistance R = 20 Ω

To find the capacitance, we need first to find the reactance of the capacitor X. Since the impedance Z = 20 - j30, the reactance of the capacitor X. is the imaginary part of the impedance. So X = ImZ = 30 Ω.

Now the reactance of the capacitor X = 1/ωC where ω = angular frequency of the circuit = 2πf where f = frequency of the circuit = 50 Hz and C = capacitance  

So, C = 1/ωX = 1/2πfX

Substituting the values of the variables into the equation, we have

C = 1/2πfX

C = 1/(2π × 50 Hz × 30 Ω)

C = 1/3000π

C = 1/9424.778

C = 1.061 × 10⁻⁴ F

C = 106.1 × 10⁻⁶ F

C = 106.1 μF

So, the capacitance is 106.1 μF

The current I = V/Z where V = voltage = 100 V at 0° and Z = impedance.

The magnitude of Z = √(20² + (-30)²)

= √(400 + 900)

= √1300

= 36.06 Ω

and its angle Φ = tan⁻¹(ImZ/ReZ)

= tan⁻¹(-30/20)

= tan⁻¹(-1.5) = -56.31°

So, V = 100 ∠ 0° and Z = 36.06 ∠ -56.31°

So, the current, I = V/Z =  (100 ∠ 0°)/36.06 ∠ -56.31°

= 100/36.06 ∠(0° - (-56.31° ))

= 2.773 ∠ 56.31° A

So, the current is 2.773 A at 56.31°.

Since the current is 2.773 A at 56.31°, the phase angle of the between the current and the voltage is 56.31° leading.

So, the phase angle of the between the current and the voltage is 56.31° leading.

Learn more about alternating voltage here:

https://brainly.com/question/20345565

Answer:

I think 9.5

Explanation:

............

All the answers are:

a) The time that will it take to rise to the highest point is 3.06 seconds.

b) The ball will rise to a height of 45.87 meters.

c) The time at which the ball will have a velocity of 10 m/s upward is 2.04 seconds.

The time when the ball has 10 m/s downward is 1.02 seconds.

d) The displacement of the ball will be zero at 6.12 seconds.

e) The time when the magnitude of the ball's velocity is equal to half its velocity of projection is 1.53 seconds.

f) The ball's displacement is equal to half the maximum height to which it rises after 0.90 seconds.

g) In each moment (upward and downward) the magnitude of the acceleration is the value of g (9.81 m/s²) and is a vector in the negative y-direction.

Let's calculate the values for each case.

a) At the highest point, the final velocity is 0, so we can use the following equation.  

[tex]v_{f}=v_{i}-gt[/tex] (1)

Where:

We know that v(i) = 30 m/s.

[tex]0=30-9.81t[/tex]

Solve it for t:

[tex]t=3.06\: s[/tex]

Hence, the time is 3.06 s.

b) At the highest point, the final velocity is 0, so we can use the following equation.  

[tex]v_{f}^{2}=v_{i}^{2}-2gh[/tex] (2)

[tex]0=v_{i}^{2}-2gh[/tex]

We know that the initial velocity is 30 m/s.

[tex]0=30^{2}-2gh[/tex]

Solving it for h we have:  

[tex]h=\frac{30^{2}}{2*9.81}[/tex]

[tex]h=45.87 \: m[/tex]

Then, the height is 45.87 m.

c) Using equation (1) we can find the time (t).

[tex]10=30-(9.81t)[/tex]

So, the time elapsed to get 10 m/s is:

[tex]t_{upward}=2.04\: s[/tex]

We know the upward time is equal to the downward time. So the time from v=10 m/s to v=0 m/s will be.

[tex]t_{upward}=2.04+t[/tex]  

[tex]t=1.02\: s[/tex]

This is the time when the ball has 10 m/s downward.          

Therefore, the time upward is 2.04 s, and the time downward is 1.02 s.

d) It will be when the ball returns to the ground.

[tex]t=2t_{upward}[/tex]

[tex]t=2*3.06[/tex]      

[tex]t=6.12\: s[/tex]

The displacement will be zero after 6.12 s.  

e) Here we need to find the time when v(f) is 15 m/s

[tex]15=30-gt[/tex]

[tex]t=\frac{15}{9.81}[/tex]  

[tex]t=1.53\: s[/tex]

The time when the v(f) is 15 m/s is 1.53 s.

f) Here, we need to find t when h = 45.87/2 m = 22.94 m

We can use the next equation:

[tex]h=v_{i}t-0.5gt^{2}/tex]

[tex]22.94=30t-0.5*9.81*t^{2}/tex]

Solving this quadratic equation, t will be:

[tex]t=0.90\: s/tex]

Hence, the ball's displacement is equal to half the maximum h, at 0.90 s.

g) In each moment the magnitude of the acceleration is the value of g (9.81 m/s²) and is a vector in the negative y-direction.

Learn more about vertical motion here:

https://brainly.com/question/13966860

I hope it helps you!

One of the two requirements of electric current is there must be an electric potential between two bodies

For electric current to flow, there must be an electric potential between two bodies.

This is because electric charge flows from a higher electric potential to a lower electric potential just as, water flows from a higher gravitational potential to a lower gravitational potential.

The difference between the electric potential between the two bodies causes the electric charge to flow between the two bodies.

This flow of electric charge constitutes electric current and electric current will only flow when there is an electric potential between two bodies.

So, one of the two requirements of electric current is there must be an electric potential between two bodies.

So, the answer is A

Learn more about electric current here:

https://brainly.com/question/13562393

Answer:

in what experements

Explanation:

Explanation:

I=2.5 Ampere ; V=100V ;t = 1 hour=60secs

We know Heat = VIt

H=100×2.5×60=15,000J

Answer:

Level 1-

1. It depends of the sense and the magnitude of the force

2. Electric force

3. A contact force need to touch to act in the object, like push a box for example. A non-contact force don't need to touch to act in the object, like an magnet attracting other magnet

4. The pressure is the force divided by the area. The unit for pressure in the international system is Pascal

5. Because the pressure is applied in all the surface of our bodies, so the force is divided by the surface area of our bodies.

Level 2-

1. The balloons stick to the walls because when she rubbed they in her clothes they earned eletric charge, and when they touched the wall, the electric charges of the wall got polarized and it creats a attraction force.

The same happened with the water stream. The balloons were charged with electric charges and the water was attracted by it.

2. Mass is the amount of matter, it's an scalar quantity. Weight is the force created by the attraction of a massive body as the Earth, and another body as a human, and a force is a vector

3. It's for increase the surface area, so the pressure will be decreased

4. When a person pulls up the syringe plunger the pressure inside the syringe is smaller than the pressure outside, so the pressure push the liquid into the syringe

5. a) The stream of the top is falling closer than the stream from the bottom, causa in the top the pressure is lower than in the bottom. In the bottom, beyond the air pressure, it has also the whole column of water making more pressure, so it goes far.

b) The streams are all near because the holes are in the same height, so the pressure is divided for all the holes.

Level 3-

1. The girl.

pressure of the girl: 50/1 = 50

pressure of the man: 100/25 = 4

pressure of the elephant: 4500/250 = 18

So, the girl exerts more pressure.

2. When the can is heated the air inside expands and get out of it. If you seal the mouth of the can, the air cannot return to inside it, and when it get colder the air inside will shrink back to the normal volume, so it will occupy less space and the outside pressure will exerts a force and deform the can.

Answer:

It tell you that the velocity is constant, what means that there's no acceleration

Answer:

hhhbbbbbbbbbbbbbbnnnnnbbhb

First, balance the reaction:

_ KClO₃   ==>   _ KCl + _ O₂

As is, there are 3 O's on the left and 2 O's on the right, so there needs to be a 2:3 ratio of KClO₃ to O₂. Then there are 2 K's and 2 Cl's among the reactants, so we have a 1:1 ratio of KClO₃ to KCl :

2 KClO₃   ==>   2 KCl + 3 O₂

Since we start with a known quantity of O₂, let's divide each coefficient by 3.

2/3 KClO₃   ==>   2/3 KCl + O₂

Next, look up the molar masses of each element involved:

• K: 39.0983 g/mol

• Cl: 35.453 g/mol

• O: 15.999 g/mol

Convert 10 g of O₂ to moles:

(10 g) / (31.998 g/mol) ≈ 0.31252 mol

The balanced reaction shows that we need 2/3 mol KClO₃ for every mole of O₂. So to produce 10 g of O₂, we need

(2/3 (mol KClO₃)/(mol O₂)) × (0.31252 mol O₂) ≈ 0.20835 mol KClO₃

KClO₃ has a total molar mass of about 122.549 g/mol. Then the reaction requires a mass of

(0.20835 mol) × (122.549 g/mol) ≈ 25.532 g

of KClO₃.

We have that the power of the compressor is

[tex]H_p=24.242hp[/tex]

From the question we are told that:

Flow rate [tex]W=1kg/s[/tex]

inlet Pressure [tex]P_1=1 bar[/tex]

inlet Temperature [tex]T_1= 288k[/tex]

Outlet Temperature [tex]T_2= 370k[/tex]

Outlet Pressure [tex]P_2=200 kN/m^2=2bars[/tex]

[tex]Cp = 1.103 kJ[/tex]

[tex]R = 287 kJ (kg.k)​[/tex]

Generally, the equation for Adiabatic head  is mathematically given by

[tex]H=\frac{ZRT_1}{Cp-1/K}[\frac{P_2}{P_1}^{(Cp-1)/Cp}-1][/tex]

Where

[tex]Z=Compressibility\ factor[/tex]

[tex]Z=0.99[/tex]

Therefore

[tex]H=\frac{(0.99)(287)(288)}{(1.103)-1/(1.103)}[\frac{(200)}{(1)}^{((1.103)-1)/(1.103)}-1][/tex]

[tex]H=560925.5958 J/kg[/tex]

[tex]H=5.6*10^5J/kg[/tex]

Generally, the equation for centrifugal compressor power  is mathematically given by

[tex]H_p=\frac{WH}{E*33000}[/tex]

Where

E is efficiency (adiabatic)

[tex]E=70\%=0.7[/tex]

Therefore

[tex]H_p=\frac{(1)(5.6*10^5)}{0.7*33000}[/tex]

[tex]H_p=24.242hp[/tex]

In conclusion

The power of the compressor is

[tex]H_p=24.242hp[/tex]

For more information on this visit

https://brainly.com/question/13389697

Answer:Acupressure

.

.

..

But why post this question in Physics

Answer:

Every dielectric medium will have a dielectric (strength) constant.

For space / vacuum it is 1. For rest of the dielectric media, it is greater than 1. The capacitance of a capacitor filled with a material of dielectric constant k, is given by the relation:

C = k . C0 (where C0 is the capacitance with space / vacuum as the dielectric material in that capacitor which means no dielectric between the plates)

So, it clearly states that the higher the dielectric constant, the more the capacitance i.e. it is directly proportional to the dielectric strength.

Dielectric constant varies with temperature.

Explanation:

plz mark me as a brainliest

Answer:

you will stc ohxoyxct txxtx xigigjjgjvvixiffjz,iffzikzfjvixii. hi h ohigiogooigoh

Explanation:

k jjvhvojvovvojivivivihvi hj

Answer:

Explanation:

ASSUMING that block = sled AND that the rope is parallel to the slope.

The force acting parallel due to the weight is

13.6(9.81)sin35.5 = 77.475 N

The maximum friction force is

(0.45)13.6(9.81)cos35.5 = 48.877 N

If rope tension is T

77.475 - 48.877 < T < 77.475 + 48.877

            28.6 N < T < 126 N

28.6 N will occur if the block is on the verge of sliding downhill

126 N will occur if the block is on the verge of sliding uphill

Could be any value between them.

We know

[tex]\boxed{\sf m=-\dfrac{v}{u}}[/tex]

[tex]\\ \sf\longmapsto 3=-\dfrac{-40}{u}[/tex]

[tex]\\ \sf\longmapsto 3=\dfrac{40}{u}[/tex]

[tex]\\ \sf\longmapsto u=\dfrac{40}{3}[/tex]

[tex]\\ \sf\longmapsto u=13.3cm[/tex]

Photons — particles of light — stream toward the smooth pane of glass and bounce off it. The image of everything in front of the mirror is reflected backward, retracing the path it traveled to get there. Nothing is switching left to right or up-down. Instead, it's being inverted front to back.

When an object is placed in front of the convex mirror, the image is formed behind the mirror.  The height of the image is 1.5 cm. The image is upright.

Convex mirror is the spherical type of mirror. It has positive focal length. It forms the images by the virtual meeting of the rays coming from the object.

By the lens maker formula,

1/f = 1/u +1/v

where image distance is v, the object distance is 30 cm and the focal length of mirror, f = Radius of curvature /2

f = 20/2 = 10 cm

Substitute the values, we get the image distance as

1/10 = 1/-30 +1/v

v = 7.5 cm (on right of lens)

From the definition,

m = -image distance /object distance = image height / object height

-(7.5) /30 = hi / 6

hi = 1.5 cm

Thus, the height of the image is 1.5 cm. The image is upright.

Learn more about Convex mirror.

https://brainly.com/question/22272341

#SPJ2

Two long parallel wires carry currents of 5.0 A and 8.0 A in the opposite direction. The wires are separated by 0.30 m. Find the magnetic force per unit length between the two wires.