Answers
Answer:
1. East on the box they are facing, West on the side from behind, North on the left side, South on the right side.
2. Because they all were facing towards the sun and the sun rise from east.
3. This one's answer is in the first answer.
4. The picture shows early morning because the shadow of the boys are in a flat position but if would have been late morning then it would not been covering that much area.
Related Questions
what do u think is the mining of the term alternative fuel ?
Answers
Answer:
an alternative fuel is any automotive fuel other than gasoline and diesel fuel
Explanation:
9. In a titration experiment 34.7 of a 0.145M solution of barium hydroxide \ Ba(OH) 2 \ is added to 20mL of hydrochloric acid (HCI) of unknown concentration until the equivalence point is reached. What is a) the molarity of the acid? and b ) How many grams of HCI are in the solution ?
Answers
Answer:
Titration reveals that 12 mL of 1.5 M hydrochloric acid are required to neutralize 25 mL calcium hydroxide solution . What is the molarity of the Ca(OH) 2 solution
Explanation:
1. A recipe for s'mores calls for 2 graham crackers, 2 chocolate pieces and 1 marshmallow. If I
have 14 graham crackers, 20 chocolate pieces and 8 marshmallows. How many total s'mores can I
make? 2. Referring to question 57, how many ingredients of each type are leftover?
Please answer these 2 questions
Answers
Answer:
1. 7 , 2. 0 crackers, 6 choc pieces and 1 marshmallow
Explanatio
They react with water to form acidic solutions. HCI + H,O = HgO + C HF + H₂O H30* + F (i) Explain why water behaves as a base in both of these reactions?
Answers
Answer:
Explanation:
In both of these reactions, the water acts as an acceptor of hydrogen ions, and is thus a base.
The table shows the results of a titration in which 25 cm3 of alkali were titrated with hydrochloric acid. Ignoring the anomalous result, calculate the mean volume of acid required to neutralise the alkali. Give your answer to 1 decimal place
Answers
Titration is used to describe a situation in which an acid is added slowly into a base to determine the amount of acid present.
What is titration?The term titration is used to describe a situation in which an acid is added slowly into a base and the amount of acid is determined from the volume of acid used.
We must note that the volume of acid is always the average volume of acid used and it can be used to compute the number of moles of acid. The question is incomplete as numerical values are not shown here.
Learn more about titration:https://brainly.com/question/10038290?
#SPJ1
when a solid is dissolved in a liquid the vapor pressure of the liquid is blank because the surface area from which molecules can evaporate is reduced
Answers
when a solid is dissolved in a liquid the vapor pressure of the liquid is decreases because the surface area from which molecules can evaporate is reduced
What is Colligative properties of solution ?These are physical properties of solution that changes with the addition of solute , i.e. colligative properties are different for pure solvent and for solution which has solute .
those properties of a solution is a colligative property if it depends only on the ratio of the number of particles of solute and solvent in the solution, not the identity of the solute.
When a solute is added to the solvent, some of the solute molecules occupy the space near the surface of the liquid,
When a solute is dissolved in a solvent, the number of solvent molecules near the surface decreases, and the vapor pressure of the solvent decreases.
This has no effect on the rate at which solvent molecules in the gas phase condense to form a liquid.
But it decreases the rate at which the solvent molecules in the liquid can escape into the gas phase.
As a result, the vapor pressure of the solvent escaping from a solution should be smaller than the vapor pressure of the pure solvent.
Therefore when a solid is dissolved in a liquid the vapor pressure of the liquid is decreases because the surface area from which molecules can evaporate is reduced
To know more about Colligative properties of solution
https://brainly.com/question/12538175
#SPJ1
https://brainly.com/question/12538175?referrer=searchResults
PLEASE HELPPPPPP ASAPPPPP!!!!!
Answers
Which prefix is used in the name of a stereoisomer to indicate that the
functional groups are on the same side of the double bond?
Answers
Answer:
"cis" (Latin for Side)
7. What do all elements in the same period on the periodic table have in common?
They have the same number of orbitals.
They have the same number of neutrons.
They have the same number of electrons.
They have the same number of protons.
Answers
Answer:
they have same number of electrons
If 3 moles of chlorine gas are reacted with excess sodium iodide, how many moles of I2 will be formed? (balance first!)
Cl2+ NaI → NaCl + I2
Answers
3 moles of I2 will be formed from 3 moles of chrlorine gas.
Explanation:
This is because, when you balance the given equation it allows for the mole ratio between the two given elements to be 1:1 so therefore 3 moles of chlorine gas will produce 3 moles of I2.
What is the main disadvantage to using overhead sprinklers, trench (furrow) irrigation, & flood
irrigation?
Answers
Ranked, Overhead Sprinklers are the worst, followed by flood, with trench being the best option.
Explanation:
Overhead sprinklers waste a lot of water due to evaporation, and are not suitable for fruit like Tomatoes.
Flood irrigation also is wasteful as more soil than necessary is watered. It is also very species limited as most plants do not appreciate a full bath, only a shower.
Trench Irrigation brings water precisely where it is meant to, and loses less water to evaporation of watering what does not need it.
So you had to pick one, use Drip Irrigation instead for a small garden. If these are the only options, go for trench.
Given the specific heat of lead is 0.129 J/gK and that it takes 93.45 of energy to heat a sample of lead from 22.3°C to 40.4°C find the mass of the lead.
40.0 g
54 g
54.0 g
40 g
Answers
Answer:
nice
Explanation:
you can do it just try your best
Which of the following choices could be an isomer of a compound with an empirical formula of C₄H₁₀O₃?
CHO
CH₂O
C₈H₂₀O₆
C₅H₁₁O₄
Answers
The statement, that describe an isomer of a compound with an empirical formula of C₄H₁₀O₃ is "CHO."
What is an empirical formula?The empirical formula of an organic compounds is the lowest whole number ratio of atoms contained in the substance, as defined in chemistry. The empirical formula gives the minimal ratio of the number of various atoms that existing. It's an empirical formula, if the formula is shortened, whereas not the exact number of atoms in the molecule, The given isomer of a compound is C₄H₁₀O₃. For this isomer, CHO is the empirical formula.
Hence, the correct answer is CHO.
Learn more about empirical formula here
https://brainly.com/question/14044066
#SPJ2
1. A gas having the following composition is burnt under a boiler with 50% excess air.
Component Mole%
CH4 70
C3H8 15
CO 15
What is the composition of the stack gas?
Answers
The composition of the stack gas are :
[tex]CH_4[/tex]= 0.8713
[tex]C_3H_8[/tex] = 0.0202
CO = 0.107
What is a mole fraction?The ratio of the number of moles of one component of a solution or other mixture to the total number of moles representing all of the components.
Assuming 100 g of the stack gas. Calculate the mass of each species in this sample according to their percentages.
Mass of [tex]CH_4[/tex] : 70% of 100 g = 70 g
Mass of [tex]C_3H_8[/tex] : 15% of 100 g = 15 g
Mass of CO : 15% of 100 g = 15 g
Now calculate the number of moles of each species:
Number of moles of [tex]CH_4[/tex] : [tex]\frac{70 g}{16.04 g/mol}[/tex] = 4.3 mole
Number of moles of [tex]C_3H_8[/tex]: [tex]\frac{15 g}{144.1 g/mol}[/tex] = 0.10 mole
Mass of CO : [tex]\frac{15 g}{28.01 g/mol}[/tex] = 0.53 mole
Now to calculate the mole fraction of each we use the formula:
Mole fraction of [tex]CH_4[/tex]: [tex]\frac{4.3}{4.935}[/tex] = 0.8713
Mole fraction of [tex]C_3H_8[/tex] : [tex]\frac{0.10}{4.935}[/tex] = 0.0202
Mole fraction of CO : [tex]\frac{0.53}{4.935}[/tex] = 0.107
Hence, composition of the stack gas are:
[tex]CH_4[/tex] = 0.8713
[tex]C_3H_8[/tex] = 0.0202
CO = 0.107
Learn more about mole fraction here:
https://brainly.com/question/13135950
#SPJ1
What is the number of moles of glucose (C,H,O,) in 0.500
of a 0.40
M
solution?
Answers
Answer:
0.500
Explanation:
We presume your "centroid ratio theorem" tells you that AG = 2·DG, so ...
(x+7) = 2(x -15)
x + 7 = 2x - 30 . . . . eliminate parentheses
37 = x . . . . . . . . . . .add 30-x
Then AG = 37+7 = 44
and DG = 37-15 = 22.
Of course, AD = AG +GD = 44 +22 = 66
What is the mass of a baby (in grams) if the babies weight is 6 lbs. 6 oz?
Answers
Arrange these solutions in order of increasing freezing point.
0.10 M ethanol, 0.10 M CaCl2, 0.10 M MgSO4
Answers
The increasing order of the freezing point of the compounds are 0.10 M ethanol < 0.10 M CaCl2 < 0.10 M MgSO4.
Freezing point of the compoundsThe freezing points of ethanol, calcium chloride and magnesium sulfate is determined as follows;
0.10 M ethanol ---> freezing point = -173 ⁰F0.10 M CaCl2 ---> freezing point = -62 ⁰F0.10 M MgSO4 ----> freezing point = 2055.2 ⁰FThus, the increasing order of the freezing point of the compounds are as follows;
0.10 M ethanol < 0.10 M CaCl2 < 0.10 M MgSO4.
Learn more about freezing point here: https://brainly.com/question/24314907
#SPJ1
Changes in gravitational potential energy are mathematically described as __________.
Answers
Answer:
Kinetic energy
Explanation:
Gravitational potential energy changes into kinetic energy. The equation for gravitational potential energy is GPE = mgh, where m is the mass in kilograms, g is the acceleration due to gravity (9.8 on Earth), and h is the height above the ground in meters
Calculate the molarity of a salt solution with a volume of 0.250L that contains 0.70 mol of NaCl. (SHOW WORK)
Answers
Answer:
= 0.28M
Explanation:
data:
volume = 0.250 L
= 0.250dm^3 ( 1litre = 1dm^3)
moles = 0.70 moles
Solution:
molarity = [tex]\frac{no. of moles}{volume in dm^3}[/tex]
= 0.70 / 0.250
molarity = 0.28 M
how do tidal bulges form?
Answers
Answer: The pull of the moon's gravity on Earth's water causes tidal bulges to form on the side closest to the moon and farthest from the moon. In the place where there are tidal bulges, high tide occurs along coastline.
Explanation:
Can you please help solve and explain the steps for the calculation?
The pH of a basic solution is 9.51, what is the [H+] ?
Answers
Answer:
The hydrogen ion concentration in a solution, [H+], in mol L-1, can be calculated if the pH of the solution is known.
pH is defined as the negative logarithm (to base 10) of the hydrogen ion concentration in mol L-1 pH = -log10[H+] ...
[H+] in mol L-1 can be calculated using the equation (formula): [H+] = 10-pH
Is this a:
Acid
Base
Neither
Answers
Answer:
Acid
Explanation:
The given structure is that of formaldehyde.
Formaldehyde is a weak acid (pH = 3.5 / 3).
______
Hope it helps ⚜
In an investigation, the atoms of a certain substance
lose energy during a change of state. Before the
change, the atoms are far apart and move constantly
at high speeds and in all directions. After the change,
the atoms are close together but are able to slide past
one another.
Use the diagram that shows changes of state between
solid, liquid, and gas to answer the question.
gas
M
M
zo
Z
Answers
Since the molecules tend to coalesce but still slide past one another, the substance was changed from gas to liquid.
What is a phase change?The term phase change refers to a change from one state of matter to another. Now we know that one of the effects of heat is a change of state.
Hence, when heat is withdrawn, the molecules tend to coalesce but still slide past one another. This implies that the substance was changed from gas to liquid.
Learn more about phase change:https://brainly.com/question/12390797
#SPJ1
Answer: Choice 3: O
Explanation:
EDG FINAL
What does the strong nuclear force do?
Answers
Answer:
The strong force binds quarks together in clusters to make more-familiar subatomic particles, such as protons and neutrons. It also holds together the atomic nucleus and underlies interactions between all particles containing quarks.
Which elements occupy the same group in the periodic table
Answers
Answer:
Elements that occupy the same column on the periodic table
Determine the number of molecules present in 0.20g of CO2
Answers
Answer:
Here, is the number of moles in the CO2. Substitute 0.20 g for weight and 44 g/mol for molecular weight of the CO2.
1 mol = 6.02.10²³ particles (atoms, molecules, ions)
mol CO₂ = 0.2 g : 44 g/mol = 0.0045
molecules = 0.0045 x 6.02 x 10²³ = 2.709 x 10²¹
What is the correct configuration of phosphorus ( P) ?
Answers
Answer:
[Ne] 3s² 3p³
Hope it helps
Conversion factors:
1000 mL per L
1000 ug per mg
A certain atmospheric sample contains 1.01 x 10-4 mg of some contaminant per mL of air. This passes through an airlock, into some Mars colony lander with a volume of 2.28 x 104 L. 401 people are living and working inside. Assuming equal exposure among every person how many micrograms of contaminant will each person receive?
Answers
The number of micrograms of contaminant each person will receive is 5,742.64 ug.
Number of micrograms of contaminant per personThe number of micrograms of contaminant each person will receive is calculated as follows;
Amount of contaminant (mg) = (1.01 x 10⁻⁴ mg/mL) x 2.28 x 10⁴ L
Amount of contaminant (mg) = 2.3028 mg.L/mL
Amount of contaminant (mg) = (2.3028 mg.L/mL) x (1000 mL/L) = 2,302.8 mg
Amount of contaminant (ug) = 2,302.8 mg x 1000 ug/mg = 2,302,800 ug
Amount of contaminant per person (ug/person)= (2,302,800 ug) / (401 persons)
= 5,742.64 ug per person
Learn more about micrograms of contaminant here: https://brainly.com/question/14522199
#SPJ1
How many of the mentos would you use to have the biggest chemical reaction?
Answers
Use the balanced chemical equation below. If I have 3.7 moles of AgNO3, how much Cu(NO3)2 should I produce?
Cu + 2 AgNO3 --> Cu(NO3)2 + 2 Ag
Answers
All metal nitrates are soluble in water, how are you going to do that?
But just for a theoretical exercise:
2AgNO3(aq) + Cu^2+(aq) >>>> 2Ag+(aq) + Cu(NO3)2
2 moles of silver nitrate produce 1 mole of copper nitrate.
Therefore 3 moles would produce 3/2 moles of copper nitrate.
Explanation:
