Answer:
The ground hits the ball with same force with which the balls hit the ground. That's why ball bounces back.
Gravity stops it from bouncing forever.
Hope this helps..
Thiết bị nào sau đây không phải là nguồn điện
A. Ắc quy
B. Pin
C. Máy phát điện
D. Bóng đèn điện
Thiết bị không phải nguồn điện:
Đáp án D
There is the more role of the moon than the sun to occur tides in the oceans,why?
Answer:
The ocean tides on earth are caused by both the moon's gravity and the sun's gravity. ... Even though the sun is much more massive and therefore has stronger overall gravity than the moon, the moon is closer to the earth so that its gravitational gradient is stronger than that of the sun.
The moon plays a larger role than the sun in causing tides in the oceans because it is much closer to Earth and has a stronger gravitational pull on our planet. The gravitational force between two objects is directly proportional to their masses and inversely proportional to the square of the distance between them.
Although the sun is much larger than the moon, its gravitational pull on Earth is much weaker because it is much farther away. The moon, on the other hand, is much smaller than the sun, but it is much closer to Earth and exerts a stronger gravitational force on our planet. This gravitational force causes the water in the oceans to bulge towards the moon, causing high tides.
In addition to the gravitational force, the shape of the ocean basins, the rotation of the Earth, and the positions of the sun and moon also play a role in causing tides. However, the moon's gravitational force is the primary factor that causes tides in the oceans.
it is isn't good to use the local units like Mana , Pathi etc in international measurement. why?
Answer:
because they are not standard unit(accepted globally)
Explanation:
hope its help
Because outside of your local group, nobody will know what you're talking about.
My people originally used the sha'ah, yom, and khelek for time, the amah for length, the tchum shabbat for distance, and the epha, omer, baytsa, log, and kazayit for volume.
See what I mean ?
give one example where friction is a hindrance.
Answer:
an example of when friction is a hindrance, is if someone with shorts is sliding down a slide. their skin rubbing on the slide will cause friction and will slow them down. another example is if you're dragging a large wooden box across the floor. the wood and the floor interacting cause friction and will make it more difficult to push the box.
Explanation:
hope this helps :D
The following arbitrary measurements are made and the errors sited are the aximum errors A = 15.21 +0.01, B = 10.82 +0.05, C = 11.00+ 0.03. If D= A + B + C; (a) Calculate the maximum error in D. (b) if the errors sited are standard errors, calculate the standard error in D.
Maximum error in the result of the sum of measurement is equal to the sum absolute error of the individual observed measurements
(a) The maximum error in D is 0.09
(b) The standard error in D is approximately 0.034
The procedure for arriving at the above values is as follows;
The given measurements and the sited errors are;
A = 15.21 + 0.01
B = 10.82 + 0.05
C = 11.00 + 0.03
D = A + B + C
(a) Required parameter;
To calculate the maximum error in D
The equation for the propagation of error in addition is presented as follows;
Given that we have;
x = a + b
Therefore;
x + ±Δx = (a ± Δa) + (b ± Δb) = a + b ± (Δa + Δb)
∴ Δx = Δa + Δb
From the above formula, we have;
Where;
D = A + B + C
The maximum error in D = The sum of the maximum error in A, B, C
∴ The maximum error in D = 0.01 + 0.05 + 0.03 = 0.09
(b) Required parameter:
To find the standard error in D
The standard error is the sampling distribution's standard deviation, SD
Variance = SD²
The combined variance, SD² = The sum of the squares of individual standard deviations
Given that the standard errors represents the standard deviation, we get;
The combined variance, SD² = 0.01² + 0.05² + 0.03²
The combined variance, SD = √(0.01² + 0.05² + 0.03²) = 0.059
[tex]Standard \ error = \dfrac{SD}{\sqrt{n} }[/tex]
Where n = 3, for the three measurement, we get;
[tex]Standard \ error = \dfrac{\sqrt{0.01^2 + 0.05^2 + 0.03^2} }{\sqrt{3} } \approx 0.034[/tex]
The standard error in D is approximately 0.034
Learn more about maximum error and standard error here:
https://brainly.com/question/13106593
https://brainly.com/question/17164235
How many atoms are in the compound NaNO3?
Explanation:
3 atoms are in the compound
Ella is blowing up balloons in preparation for her sister's birthday. Ella finds some balloons hanging outside the house explode after a few hours. Explain why.
Answer:
they were in the sun for long
On a graph of position vs. time, a negative slope means what about motion of the object?
Answer:
Explanation:
A positive v time graph is a velocity graph. If the position/time is negative, then the slope of the line is negative. If the line is indicative of the velocity, which it is, that means that the velocity is negative (decreasing). The first choice is the one you want.
what is momentum
what is momentum in words
Answer:
It's a strength or force
Explanation:
the quantity of motion of a moving body, measured as a product of its mass and velocity
Answer:
momentum is a quality define as the product of the mass and velocity of an object.
How long will it take a 6000W motor to lift a 5000kg load through a height of 2.5m?
Answer:
20.4375 seconds.
Explanation:
Wattage = Work / time
Work = f * d
F = mass * acceleration
mass = 5000 kg
acceleration = force of gravity
acceleration = 9.81
Force = 5000 * 9.81
Force = 49050 N
Work = F * d
d = 2.5
Work = 49050 * 2.5
Work = 122625 Joules
Wattage = Work / time
time = work / wattage
wattage = 6000 watts
time = 122625 / 6000
time = 20.4375 seconds.
If, on a particular day, atmospheric pressure is 730 mm
of mercury, what is this
a) in pascals
b) in atmospheres
c) in millibars?
Answer:
b) in atmostphere
Explanation:
I made lots of research and it should be b.
a. On a particular day, atmospheric pressure is 730 mm of mercury In pascals 97392.2896252, b. On a particular day, atmospheric pressure is 730 mm of mercury in atmospheres 0.960526316 atm, c. on a particular day, atmospheric pressure is 730 mm of mercury in millibars 973.70355547 mb.
a) To convert atmospheric pressure from mm of mercury to pascals, we can use the conversion factor: 1 mm Hg = 133.322387415 pascals.
Pressure in pascals = 730 mm Hg * 133.322387415 = 97392.2896252 pascals.
b) To convert atmospheric pressure from mm of mercury to atmospheres, we can use the conversion factor: 1 atm = 760 mm Hg.
Pressure in atmospheres = 730 mm Hg / 760 = 0.960526316 atm.
c) Atmospheric pressure is often expressed in millibars (mb), where 1 atmosphere is approximately equal to 1013.25 millibars.
Pressure in millibars = 0.960526316 atm * 1013.25 mb/atm = 973.70355547 mb.
Atmospheric pressure is the force exerted by the weight of air molecules in the Earth's atmosphere. It can be measured in various units, including millimeters of mercury, pascals, atmospheres, and millibars.
Converting between these units involves using conversion factors based on established relationships between them.
In this case, the provided pressure of 730 mm Hg was converted to pascals, atmospheres, and millibars using the appropriate conversion factors.
Conversions help express pressure measurements in units that are more suitable for different contexts or calculations.
Know more about atmospheric pressure:
https://brainly.com/question/28310375
#SPJ3
Teenagers
when they should stop drinking.
A. tend to know
B. have difficulty bypowing
C. ignore
A merry-go-round rotates with a centripetal acceleration of 18 m/s^2. If the outer horses are 9 m from the center of the ride. What is their velocity?
A. 12.7 m/s
B. 14.6 m/s
C. 16.3 m/s
D. 10.4 m/s
Answer:
A
Explanation:
a_c = v^2/r
v = sqrt*a_c × r*
v = sqrt * 18 × 9*
v = 9×sqrt *2*
v = 12. 7 m/s
What is the most accurate and precise method to measure the thickness of a coin?
Answer:
The most accurate and precise method to measure the thickness of a coin would be by a micrometer screw guage.
The most accurate and precise method to measure the thickness of a coin is with the help of a screw gauge.
What is a unit of measurement?
A unit of measurement is a specified magnitude of a quantity that is established and used as a standard for measuring other quantities of the same kind.
It is determined by convention or regulation.
Any additional quantity of that type can be stated as a multiple of the measurement unit.
The smallest length that a screw gauge can measure is called its least count.
Thus, if we have to measure the thickness of a coin using a screw gauge to measure a coin is the most exact and precise approach available.
Learn more about the unit of measurement here, refer to the link given below;
brainly.com/question/12629581
#SPJ2
The mass of earth 6*10^24kg and radius is 400kg Now find the value of acceleration due to gravity when a object is 3600km from the earth surface
Answer:
Explanation:
the Earth is 6 xx 10^(24) kg and its radius is 6400 km. Find the acceleration due to gravity on the surface of the Earth. Updated On: 7-4-2021
what is the kinetic energy of a 2,000-kg car moving at 20m/s
Answer:
400k
Explanation:
Formula for KE = [tex]\frac{1}{2} mv^{2}[/tex]
Plug in:
KE = [tex]\frac{1}{2} mv^{2}[/tex]
KE = [tex]\frac{1}{2}[/tex] × 2000 × 20^2
Solve:
1000 × 400 = 400,000 or 400k
Hope this helped.
Answer : 400000J OR 4×10^4J
Kinetic energy= 1/2mv^2
Here, m=2000kg; V=20m/s
1/2×2000×20×20=400,000J
the movement of both oxygen and carbon dioxide in the body is accomplished by ___.
a. diffusion
b. endocytosis
c. exocytosis
d. osmosis
Answer: Diffusion
Explanation: Please give brainliest
An observer is standing next to the tracks, watching a train approach. The train travels at 30 m/s and blows its whistle at 8,000 Hz as it approaches and then passes by the observer without slowing down. Assuming the speed of sound is 340 m/s, how much of a frequency change did the observer hear?
7351.35Hz
f0= v-Vo/v-Vs × FSA
= 340-0 /340+30 ×8000
= 340/370× 8000
= 7351.35hz
10 solve the following humeric problem - S. a What is the lift height of salu? T. object energy required to 25 kg to mass of a 10 m.
[tex]\boxed{\sf E_P=mgh}[/tex]
[tex]\\ \sf\longmapsto E_P=25(10)(10)[/tex]
[tex]\\ \sf\longmapsto E_P=25(100)[/tex]
[tex]\\ \sf\longmapsto E_P=2500J[/tex]
Impact of Synthetic Materials Discussion
The use of synthetic materials has pros and cons. Do you think the pros of using synthetic materials outweigh the cons? Or, do you think the cons outweigh the pros and synthetic materials should not be used? Explain.
With the below stated fact I think that the pros of using synthetic materials outweighs the cons.
Before we answer the question
If the pros of using synthetic materials outweigh the cons or otherwise, let us first establish the what a synthetic material is and its pros and cons
Synthetic material
Synthetic material is a material in which a substances are changed chemically to produce a material with different characteristics.
Types of Synthetic material
Plastic bag Synthetic fiber/cloth Artificial sweetener Synthetic fuel AspirinPros of Synthetic materials
They are used in construction because of there strong bonding They can be moldedThey can be colored into any shadeThey are cheapCons of Synthetic materials
Sometimes none degradableThey do not absorb water.They are highly flammableMelts easilyIn conclusion
Although Synthetic materials has so very pressing disadvantages to human kind it is unrefusable the importance of Synthetic materials to the day to day live of all humans
Therefore, I think that the pros of using synthetic materials outweighs the cons
For more information on this visit
https://brainly.com/question/21056290
help me please i will mark as brainliest
Answer:
you would be paying $1845.26
write aparagraph explaining the difference bln the heat energy in a substances temperature in physics
The core difference is that heat deals with thermal energy, whereas temperature is more concerned with molecular kinetic energy. Heat is the transfer of thermal energy, whereas temperature is a property the object exhibits.
difference between uniform motion and non uniform motion
Answer:
Uniform motion is a type of motion that is characterized as the motion of an object wherein the object moves in a straight line and its velocity remains unchanged along that line, regardless of the duration of time, as it occupies equal distances at equal time interval and Non-uniform motion is described as the motion of an object wherein the object moves at different speeds and does not cover the same distance at equal time intervals, regardless of the duration of the time interval.
Answer:
hope it's help you
Explanation:
In Uniform motion, the movement of a body is along the straight line with constant speed. In non uniform motion, the movement of a body is along the straight line with variable speed. In uniform motion, the body covers equal distance in an equal interval of time.
derive an expression for resistivity of conductor of length l and area of cross section A
Answer
Resistivity R = K * L / A where resistivity is constant for material, L the length of the material and A the area of the material
K = R * A / L where R is the resistance of the material
What is your wheel and axle
Explanation:
The wheel and axle is a type of simple machine used to make tasks easier in terms of manipulating force by applying the concept of mechanical advantage.
The mass of objects is 4kg and it has a density of 5gcm^-3. what is the volume
Answer:
4kg×5gm^3=60
Explanation:
the object if heavy
Which of the following phenomena can be used to support the particle theory of light? Select all that apply.
The Photoelectric Effect
Polarization
Interference Patterns
Refraction
Reflection
A coin is placed at a depth of 15 cm in a beaker from the surface of water. Therefractive index of water is 4/3.Calculate height through which the image of the coin is raised.
I found this answer on another website.
give scientific reasons when the body falls freely to the ground its motion as the uniform acceleration
Answer:
When an object falls freely to the ground, its acceleration is uniform. Hint: When an object falls freely on the ground, the force of the gravity works on it. So the acceleration on the object is the acceleration due to gravity. So the acceleration is uniform on the freely falling body.
explain the delay in hearing of a sound
Answer:
Humans naturally have what's known as binaural hearing, which is the ability to hear in two ears.
