Answer:
Following are the response to the given question:
Explanation:
In the given scenario, When the balance has never been tainted before the KHP is weighted, which can affect the molar concentration of NaOH because its molarity is directly proportional to the weight including its substance. In this question it is the mistake is systemic because it may be corrected by modifying balancing parameters.
The molecular ion is not visible in the mass spectrum of 2-chloro-2- methylpropane. At what m/z value would the molecular ion be if it were visible? What evidence is there in the mass spectrum that suggests that the peak at m/z= 77 contains a chlorine atom?
Answer: hello the complete question is attached below
Visibility of molecular ion = m/z value of 77
Explanation:
For The molecular ion to be visible, it has to be at an m/z value of 77 and this is because molecular ions will have an m/z ratio = molecular mass of given molecule in most cases but not always in all cases.
And the visibility is possible after the removal of CH₃ ion.
ii) Evidence in the mass spectrum that suggests peak at m/z = 77
attached below
Part A
3.75 mol of LiCl in 3.36 L of solution
Express the molarity in moles per liter to three significant figures
Answer:
1.12 mol/L.
Explanation:
From the question given above, the following data were obtained:
Mole of LiCl = 3.75 moles
Volume = 3.36 L
Molarity =?
Molarity is simply defined as the mole of solute per unit litre of the solution. Mathematically, it is expressed as:
Molarity = mole / Volume
With the above formula, we can obtain the molarity of the solution as follow:
Mole of LiCl = 3.75 moles
Volume = 3.36 L
Molarity =?
Molarity = mole /Volume
Molarity = 3.75 / 3.36
Molarity = 1.12 mol/L
Thus, the molarity of the solution is 1.12 mol/L
Consider a hypothetical metal that has a density of 10.6 g/cm3, an atomic weight of 176.8 g/mol, and an atomic radius of 0.130 nm. Compute the atomic packing factor if the unit cell has tetragonal symmetry, values for the a and c lattice parameters are 0.570 and 0.341, respectively.
Answer:
0.3323
Explanation:
GIven that:
Density of the metal = 10.6 g/cm^3
atomic weight = 176.8 g/mol
atmic radius = 0.130 nm
values of a and c = 0.570 nm and 0.341 nm respectively
For us to determine the atomic packing factor, we need to first determine the volume of all spheres (Vs) and the volume of unit cell (Vc).
However, the number of atoms in the unit cell (n) can be computed as:
[tex]n = \dfrac{\rho * V_c *N_A}{A} \\ \\ n = \dfrac{(10.6) * (5.7)^2 (3.41)*(10^{-24}) *(6.022*10^{23})}{176.8}[/tex]
n = 4.0
Thus, the number of atoms in the unit cell is 4
∴
The atomic paking factor (APF) is calculated by using the formula:
[tex]\dfrac{Vs}{Vc} = \dfrac{4 * \dfrac{4}{3}\pi *R^3 }{a^2 *c} \\ \\ \\ \dfrac{Vs}{Vc} = \dfrac{4 * \dfrac{4}{3}\pi *(1.30*10^{-8})^3 }{(5.70*10^{-8})^2 *(3.41*10^{-8})}[/tex]
= 0.3323
một chất hữu cơ có cấu tạo c2h2 cho khí br2 vào ta được hỗn hợp khí
Answer:
C2H2 + Br2 → C2H2Br2
Explanation:
how many moles of CO2 are formed from 3.0 mol of C2H2
Answer:
50.0 moles C02
Explanation:
First write down the CORRECTLY balanced equation. NOTE: The equation you provide is incorrect.
2C2H2(g) + 5O2(g) ==> 4CO2(g) + 2H2O(g) CORRECT EQUATION
Next, look at the stoichiometric ratio of C2H2 to CO2. You can see it is 2 moles C2H2 produces 4 moles CO2.
Thus, 25.0 moles C2H2 x 4 moles CO2/2 moles C2H4 = 50.0 moles CO2
The shape of a molecule is determined by:
A. All of these
B. The number of electron clouds around the atom.
C. The number of bonds.
D. Mutual repulsion between electrons.
Consider the molecule PF5.
Indicate how many lone pairs you would find on the central atom:
Indicate how many total bonds are connected to the central atom (count single bonds as 1 bond, double bonds as 2 bonds, and triple bonds as 3 bonds):
Explanation:
here's the answer to your question
A substance which is made up of the same kind
of atom is known as?
Answer:
Element
Element : A pure substance composed of the same type of atom throughout. Compound : A substance made of two or more elements that are chemically combined in fixed amounts.
Explanation:
What are the effects of global warming?
the effects are: temperature rises, water shortages, and increased fire threats
A student has accidentally spilled 100.0 mL of 3.0 mol/L nitric acid onto the lab bench. What mass of sodium bicarbonate would the teacher need to sprinkle on this spill to neutralize and clean it up?
Answer:
25 g
Explanation:
Step 1: Write the balanced equation
HNO₃ + NaHCO₃ ⇒ NaNO₃ + H₂O + CO₂
Step 2: Calculate the reacting moles of HNO₃
100.0 mL of 3.0 mol/L HNO₃ reacted.
0.1000 L × 3.0 mol/L = 0.30 mol
Step 3: Calculate the reacting moles of NaHCO₃
The molar ratio of HNO₃ to NaHCO₃ is 1:1. The reacting moles of NaHCO₃ are 1/1 × 0.30 mol = 0.30 mol.
Step 4: Calculate the mass corresponding to 0.30 moles of NaHCO₃
The molar mass of NaHCO₃ is 84.01 g/mol.
0.30 mol × 84.01 g/mol = 25 g
The density of a gas cannot be measured.
True
False
Answer:
False
Explanation:
Answer:
False
Explanation:
Four atoms and/or ions are sketched below in accordance with their relative atomic and/or ionic radii. Which of the following sets of species are compatible with the sketch?
Explain. (a) C,Ca2+,Cl−,Br−;
(b) Sr4, Cl,Br−,Na+
(d) Al,Ra2+,Zr2+
(c) Y,K,Ca,Na+, Mg2+;
e) Fe,Rb,Co,Cs
Answer:
Hence the correct option is an option (b) Sr4, Cl,Br−,Na+.
Explanation:
Bromine and chlorine belong to an equivalent group. As we go down the group the dimensions increases which too there's a charge on the bromine atom. therefore the size of the Br- is going to be larger in comparison to the chlorine atom.
Sr atom is within the second group, and also it's below the above-mentioned atoms.so Sr is going to be the larger one among all the atoms.
Sodium and chlorine belong to an equivalent period .size decrease from left to right. but due to the charge on sodium its size decreases and there's an opportunity that Na+ size could be adequate for Cl.
Here we finally assume that two atoms are of an equivalent size (Na+ and Cl) which are less in size compared to the opposite two(Sr and Br-) during which one is greater (Sr)and the opposite is smaller(Br-).
A strawberry nutritional drink used for a liquid diet is flavored with methyl butanoate. Draw the structure of methyl butanoate.
Answer:
See explanation and image attached
Explanation:
Methyl butanoate is an ester. Esters have the general molecular formula, RCOOR where the two Rs may represent the same or different alkyl groups.
Methyl butanoate is has a fruity odor, smelling like apples or pineapples fragrance. It is also called methyl butyrate.
The structure of the compound is shown in the image attached to this answer.
385 x 42.13 x 0.079 is (consider significant figures):
385 x 42.13 x 0.079 = 1281.38395
A reaction vessel is charged with phosphorus pentachloride, which partially decomposes to phosphorus trichloride and molecular chlorine according to the following reaction:
PCl5(g)â PCl3(g)+Cl2(g)
When the system comes to equilibrium at 250.0°C, the equilibrium partial pressures are: PPCl5 = 0.688 atm and PPCl3 = PCl2 = 0.870 atm.
Required:
What is the value of Kp at this temperature?
Answer:
Kp = 1.10.
Explanation:
Hello there!
In this case, according to the given information about the chemical reaction at equilibrium, it turns out possible for us to find the partial pressures-based equilibrium expression for the decomposition of phosphorous pentachloride by applying the law of mass action whereas the pressure of products is divided by that of the reactants as shown below:
[tex]Kp=\frac{p_{PCl_3}p_{Cl_2}}{p_{PCl_5}}[/tex]
Now, we plug in the given pressures to obtain:
[tex]Kp=\frac{0.870}{0.688} \\\\Kp=1.10[/tex]
Regards!
Copper wire has a high electrical conductivity.
True
False
Answer:
True
Explanation:
Copper has the highest electrical conductivity rating of all non-precious metals: the electrical resistivity of copper = 16.78 nΩ•m at 20 °C. Specially-pure Oxygen-Free Electronic (OFE) copper is about 1% more conductive (i.e., achieves a minimum of 101% IACS).
True is the correct answer.
You have been contracted to determine how different salts affect the pH of water. Which of the solids in the following set should you test to investigate for the effects of cations on pH?
a. AlBr3
b. Rb2SO3
c. MgCl2
d. RbBrO
e. CH3NH3Br
Answer:
Hence the solids that should test to investigate the effects of cations on pH is
[tex]AlBr_{3}[/tex] (Cation is Al 3+)
[tex]MgCl_{2}[/tex] ( Cation is Mg 2+)
[tex]CH_{3} NH_{3} Br[/tex] ( Cation is NH2+).
Explanation:
The solids in the following should you test to investigate the effects of cations on pH.
[tex]AlBr_{3}[/tex] contains (Cation is Al 3+)
[tex]MgCl_{2}[/tex] contains ( Cation is Mg 2+)
[tex]CH_{3} NH_{3} Br[/tex] contains( Cation is NH2+ )
The atoms or the molecules containing the positive charge that gets attracted to the cathode are called cations. The compounds a. [tex]\rm AlBr_{3}[/tex], c. [tex]\rm MgCl_{2}[/tex] and e. [tex]\rm CH_{3}NH_{3}Br[/tex] should be investigated.
What are cations and pH?Cations are the positive charge containing molecules and atoms that have more protons in their nucleus than the number of electrons in their shells. They are formed when they lose one or more electrons to another atom.
The addition or release of the electrons of the cations and anions affects the pH system as absorption of the cation decreases the pH and absorption of the anions increases the pH.
Hence, [tex]\rm Al^{3+}[/tex], [tex]\rm Mg^{2+}[/tex] and [tex]\rm NH^{2+}[/tex] are the cation that should be investigated. The addition of the cations will reduce the pH of the reaction.
Therefore, absorption of the cation reduces the pH.
Learn more about cations and pH here:
https://brainly.com/question/13800672
What is molarity?
A. A measure of saturation.
B. A ratio of moles of solvent to moles of solution.
C. A measure of moles.
D. A measure of concentration.
Answer:
Molarity is a measure of concentration
I Hope its right if not so advance sorry :)
The molarity measures the number of moles of the solute present per liter of the solution and it measures the concentration of the solution. option D is correct.
What is molarity?Molarity is the amount or the number of moles present in per liter of the solution it is the unit to measure the concentration of the moles.
Unit of molarity will be moles per liter and the temperature does not affect the molarity of the solution. molarity can be calculated by dividing the concentration of the solution by the molar mass of the given element.
molarity = weight / mass × 1000/ volume in liters.
With the help of this formula, we can calculate the molarity.
Therefore, molarity measures the number of moles of the solute present per liter of the solution and it measures the concentration of the solution. option D is correct.
Learn more about molarity, here:
https://brainly.com/question/15532279
#SPJ2
What volume of a 1.5 M KOH solution is needed to provide 3.0 moles of KOH?
3.0 L
2.0 L
4.5 L
0.50 L
0.22 L
Please explain!
Explanation:
here's the answer to your question
2.0 L
Answer:
Solution given:
no. of mole(n)=3.0mole
molarity(M)=1.5M
we have
Volume of a substance is equal to the ratio of its no of mole to its molarity.
By this we get a relation:
Volume=no.of mole/molarity
substituting value
Volume=3.0/1.5=2
The required volume is 2 litre.
convert 14.72 kg to ____ mg
Answer:
14720000
Explanation:
1 kg = 1000000 mg
14.72 kg = 14.72 x 1000000
=14720000
Please Mark me brainliest
what characterizes a homogeneous mixture?
Answer:
a mixture that doesn't really show the ingredients or things put into the material or food.
QUESTION 11
Identify the reaction type.
KOH + HNO3 -> H2O + KNO3
O combustion
O decomposition
O combination
O single displacement
O double displacement
The "Nutrition Facts" on a label of a 16 fluid ounce container of apple juice states that a serving size is 8 fluid ounces contains 176 Calories and 240 milligrams of potassium.
Nutrition Facts
Serving Size 8 fl. oz. (240mL)
Servings Per Container: 2
Amount Per Serving
Calories 176
% Daily Value*
Total Fat 0g 0 %
Sodium 32mg 1 %
Potassium 240mg 6 %
Total Carbohydrate 29g 10 %
Sugars 26g
Protein 0g
a) How many calories would 1 fluid ounce of apple juice contain?
b) How many milligrams of potassium would 1 fluid ounce of apple juice contain?
Answer:
a) 22 calories
b) 30 mg
Explanation:
Divide number of cal or mg of pot by 8 fl oz.
Three peptides were obtained from a trypsin digestion of two different polypeptides. Indicate the possible sequences from the given data.
a. Val-Gly-Arg
b. Ala-Val-Lys
c. Ala-Gly-Phe
Answer:
A) Val-Gly-Arg-Ala-Val-Lys-Ala-Gly-Phe
B) Ala-Val-Lys-Val-Gly-Arg-Ala-Gly-Phe
Explanation:
The possible sequences that could be obtained from the available dat provided are :
A) Val-Gly-Arg-Ala-Val-Lys-Ala-Gly-Phe
B) Ala-Val-Lys-Val-Gly-Arg-Ala-Gly-Phe
Trypsin is generally a catalyst for the breakdown of proteins into smaller peptides ( during the hydrolysis of peptide bonds )
“Enter the conjugate acids of no2- and no3-“
Answer:
nitrit,nitrat
Gaseous methane (CH4) will react with gaseous oxygen (O2) to produce gaseous carbon dioxide (CO2) and gaseous water . Suppose 2.73 g of methane is mixed with 6.7 g of oxygen. Calculate the maximum mass of water that could be produced by the chemical reaction. Round your answer to significant digits.
Answer:
3.8g of H2O are produced
Explanation:
The balanced reaction of the problem is:
CH4 + 2O2 → CO2 + 2H2O
Where 1 mole of CH4 reacts with 2 moles of O2
To solve this question we need to find, as first, the moles of each reactant in order to find limiting reactant. With limiting reactant we can find the moles of H2O produced and its mass as follows:
Moles CH4 - 16.04g/mol-
2.73g * (1mol/16.04g) = 0.170 moles CH4
Moles O2 -32g/mol-
6.7g (1mol/32g) = 0.209 moles O2
For a complete reaction of 0.170 moles of CH4 are needed:
0.170 moles CH4 * (2 mol O2 / 1mol CH4) = 0.340 moles O2
As there are just 0.209 moles of O2, oxygen is limiting reactant
The moles of water produced are:
0.209 moles O2 * (2mol H2O / 2mol O2) = 0.209 moles H2O
Mass water -Molar mass: 18.01g/mol-
0.209 moles H2O * (18.01g/mol) = 3.8g of H2O are produced
Nitrous oxide, NO, decomposes exothermically into nitrogen gas and oxygen gas. When graphing [NO] versus time, a straight line can be drawn through the experimental points. From this information, determine the reaction order.
Answer:
Zero-Order
Explanation:
The exothermic decaying of nitrous oxide at 575° C will lead to [tex]N_{2} and O_{2}[/tex] as follows:
[tex]2N_{2}O[/tex] → [tex]2N_{2}(g) + O_{2} (g)[/tex]
Hot platinum wire in the above reaction would function as a catalyst in the zero-order. However, if the reaction is considered in the gaseous phase, it will be more inclined towards second-order.
In the given scenario([tex]2N_{2}O[/tex] → [tex]2N_{2}(g) + O_{2} (g)[/tex]), the reactant molecules of Nitrous oxide are restricted to the ones which have linked themselves to the catalyst's surface. Once this limited surface is filled, the extra molecules of gas would remain vacant until the previously attached molecules with the surface are decayed entirely.
Determine whether the statement about identifying a halide is true: Regardless of any concentration of ammonium solution, the precipitates in the reaction solution of my unknown halide after 0.1M AgNO3 remain because my unknown halide solution contains Br. Select one: True False
Answer:
False
Explanation:
The statement ; Regardless of any concentration of ammonium solution the precipitate of unknown halide after 0.1M AgNO3 will remain is FALSE
This is Because the remaining concentration of AgNO3 is dependent on the solubility of Ag⁺
When comparing Be2 and H2:
I. Be2 is more stable because it contains both bonding and antibonding valence electrons.
II. H2 has a higher bond order than Be2.
III. H2 is more stable because it only contains 1s electrons.
IV. H2 is more stable because it is diamagnetic, whereas Be2 is paramagnetic
a. II,III,IV
b.II,III
c.III only
d.I,II
e.III,IV.
Answer:
The answer is "Option b".
Explanation:
H2 does have bond energy of 1, while Be2 has a covalent bond of zero. Be2 has eight electrons, each of which dwells in a distinct orbital. As just a result, four of them are linked molecular orbitals and two are antibonding molecular orbitals, respectively. As just a result, this molecule is unstable. This chemical orbital, with a bond order of 1, has just two electrons. As a result, it is a very solid substance. H2's bond length is higher than Be2's. Since it only has one electron, H2 is more stable than that of other compounds.
What mass of precipitate (in g) is formed when 250.0 mL of 0.150 M CuCl₂ is mixed with excess KOH in the following chemical reaction?
CuCl₂(aq) + 2 KOH(aq) → Cu(OH)₂(s) + 2 KCl(aq)
Answer:
3.6487g
CuCl2 moles reacted = (0.15×250)/1000
according to balanced chemical equation
precipitated Cu(OH)2 moles = Reacted CuCl2 moles
molar mass of Cu(OH)2 = 63.5+ (17+1)×2 = 97.5
mass of precipitate = (97.5 × 0.15×250)/1000
= 3.648g
