Answer:
A. Reversible Process
Explanation:
Going through the meaning of the options we have;
A Reversible: This reaction involves a backward and forward step.. This means that reactant would react to form products and products in turn wold react to form reactants. This is the correct option.
B. Elementary process: This refers to a single step reaction with a single transition state and no intermediates. This option is wrong because that is not what the question says.
C. Equilibrium Reaction: This refers to a reaction in which there is no change in the concentration of the reactants and products. Rate of forward reaction is equal to the rate of backward reaction.
D. Forbidden Reaction: This is not the correct option.
E. Forward process: This refers to the reaction that involves reactants reacting to form products. This is also not correct as the question states that the products are also able to form reactants.
Which is an example of the electromagnetic force?
- A compass needle points north toward earths magnetic pole
- An iron nail rolls off a table and falls to the ground
- the moon pulls on the water in earths oceans, causing tides
- protons that make up a nitrogen atom stays together in the nucleus
Answer:
The correct Answer is A.
proof below <3
Which is a valid velocity reading for an object? 45 m/s 45 m/s north 0 m/s south 0 m/s
Answer:
45 m/s north
Explanation:
Edge 2020
Answer: (B) 45 m/s north
Explanation: right on edge 2020 (so basically the same reason as person above)
Sam read that all subsystems interact with each other. Which example shows how changes in the cryosphere can affect the geosphere?
Answer:
Land that gains weight can rise slowly.
Explanation:
:D
How many moles are in 8.30 X 10 to the power of 23, molecules of CO2?
Answer:
1.38 molesExplanation:
To find the number of moles in a substance given it's number of entities we use the formula
[tex]n = \frac{N}{L} \\[/tex]
where n is the number of moles
N is the number of entities
L is the Avogadro's constant which is
6.02 × 10²³ entities
From the question we have
[tex]n = \frac{8.30 \times {10}^{23} }{6.02 \times {10}^{23} } = \frac{8.3}{6.02} \\ = 1.3787...[/tex]
We have the final answer as
1.38 molesHope this helps you
It is a vocal music of Mindoro
Answer:
instrumental music is used in festivals, rituals, etc.
Explanation:
How many grams of chromium(II) sulfate, , must be dissolved to prepare 500. mL of a 0.219 M aqueous solution of the salt?
Please help answer!!!
Answer:
C stays the same ez
Explanation:
I did a chocolate lab. It was melting chocolate. These are the tree question please answer all. Please help me ASAP
Answer:
no the mass will not change
Explanation:
What does a weather map use to represent areas of high air pressure?
An "A"
An "H"
An "L"
A "P"
Answer:
H
Explanation:
What mass of water can be heated from 10.0 C to 38.0 Celsius by addition of 3,500j? (Specific heat capacity of water is 4.18 j/g C)
Mass of water : 29.904 g
Further explanationHeat can be formulated
Q=m.c.Δt
Q, heat, J
m,mass, g
c, specific heat, j/g C
Δt,temperature, C
Δt,temperature[tex]\tt 38-10=28^oC[/tex]
mass of water[tex]\tt m=\dfrac{Q}{c.\Delta t}\\\\m=\dfrac{3500}{4.18\times 28}\\\\m=29.904~g[/tex]
Some acids can eat through or what type of metals
Answer:
mixture of hydrochloric and nitric acid can dissolve noble metals, such as gold and platinum.
Explanation:
Sulfur (S) and oxygen gas (02) undergo a chemical
reaction to form sulfur trioxide (SO3).
Answer:
C
Explanation:
I just think it is the right answer :) Sorry if I am wrong..
Answer:
c
Explanation:
what type of reactions are the following? ( single displacement, double displacement, synthesis, or decomposition)
4Mn3O4(s) + O2(g) -> 6Mn2O3(s)
Al2O3(aq) + 3C(s) ->3CO(g) + 2Al(l)
Ba(C2H3O2)2(aq) + Na2CO3(aq) -> BaCO3(s) +2NaC2H3O2(aq)
KOH(aq)+HBr(aq) -> KBr(aq)+H2O(l)
Answer:
1. synthesis
2. single displacement
3.double displacement
4.double displacement
Explanation:
1. here Mangananes (iv) oxide further reacts with oxygen to form Manganese (iii) oxide , two reactants making one product .
2. Carbon replaces aluminium from aluminium oxide to make pure aluminium and carbon monoxide and carbon dioxide.
3. sodium replaces barium to make sodium acetate , barium replaces sodium to make barium carbonate ( precipitate )
4. potassium replaces Hydrogen to produce potassium bromide, while hydrogen and hydroxide ions combine to make water .
Which of these is the best procedure to determine the concentration of a basic solution?
Click the answer you think is right.
Titration with an acid
Flame test
Density determination
Precipitation followed by gravimetric analysis
Dilution with H20
Answer:
IM VERY SORRY HAVE A GOOD DAY\\
Explanation:
The pH of a solution of 3-hydroxypropanoic acid is measured to be . Calculate the acid dissociation constant of 3-hydroxypropanoic acid. Be sure your answer has the correct number of significant digits.
Answer:
3.1 × 10⁻⁵
Explanation:
The pH of a 0.53 M solution of 3-hydroxypropanoic acid (HC₃H₅O₃) is measured to be 2.39. Calculate the acid dissociation constant of 3-hydroxypropanoic acid. Be sure your answer has the correct number of significant digits.
Step 1: Given data
Concentration of 3-hydroxypropanoic acid (Ca): 0.53 MpH of the solution: 2.39Step 2: Write the acid dissociation reaction
3-hydroxypropanoic acid is a weak acid that dissociates according to the following equation.
HC₃H₅O₃(aq) ⇄ C₃H₅O₃⁻(aq) + H⁺(aq)
Step 3: Calculate the concentration of H⁺
We will use the definition of pH.
pH = -log [H⁺]
[H⁺] = antilog -pH = antilog -2.39 = 4.07 × 10⁻³ M
Step 4: Calculate the acid dissociation constant (Ka) of 3-hydroxypropanoic acid
We will use the following expression.
Ka = [H⁺]² / Ca
Ka = (4.07 × 10⁻³)² / 0.53
Ka = 3.1 × 10⁻⁵
A weight of 22.25g was obtained when 10-mL of water at 27C was pipet to empty Erlenmeyer flask. What is the volume delivered by the pipet?
Answer:
the volume delivered by the pipette = 22.32 mL
Explanation:
To calculate this, let us first note that the density of water relates it weight and its volume (density = mass ÷ volume), hence we are going to use density to determine the volume.
Density of water = mass/volume = 0.997 g/ mL
mass = 22.25g
Density = 0.997g/mL
volume = ?
[tex]density = \frac{mass}{volume}\\\therefore volume = \frac{mass}{density}\\volume = \frac{22.25}{0.997}\\volume = 22.32\ mL[/tex]
∴ the volume delivered by the pipette = 22.32 mL
Please note that this calculation is based on the fact that the weight of the empty flask has been determined and canceled out.
8. How much heat is released when 85.0 g of steam condense to liquid water?
Answer:
199920J
Explanation:
Given parameters:
Mass of steam = 85g
Unknown:
Heat released when the liquid is condensed = ?
Solution:
The heat released by the substance is given as;
H = mL
H is the heat released
m is the mass
L is the latent heat of steam = 2352J/g
Heat released = 85 x 2352 = 199920J
suppose you wanted to make 100 grams of water what is the molar mass of water
As a mixed two substance in a test tube she noticed that the test tube because warm she also noticed gas coming from the test tube based on mias observation what was most likely occurring inside the test tube
Answer:
A new substance was forming
Explanation:
Which orbitals cannot exist?
2p 3p 4d 3f 6s 2d
Mark all that are wrong.
Answer:
The orbitals 3f and 2d cannot exist.
Explanation:
Hello!
In this case, considering the attached picture in which you find each energy level with the corresponding number of subshells, it is possible to infer level one has s subshell only, level 2 s and p, level 3 has s, p and d and from level 4 to 7 have s, p, d f, therefore, the orbitals 3f and 2d cannot exist.
Best regards!
List three types of cyclic motion. FIRST GET BRAINLEIST
Answer:
translational, rotational, and oscillatory.
Explanation:
What will the weather most likely be like if a low pressure system settles over an area
Answer:
Low-pressure systems are associated with clouds and precipitation that minimize temperature changes throughout the day.
Explanation:
This is how osmium appears in the periodic table.A purple box has O s at the center and 76 above. Below it says osmium and below that 190.23.
Rounded to the nearest whole number, how many neutrons, on average, are in an atom of osmium?
76
114
190
266
Answer:
it B 114 on edge 2020
Explanation:
UwU
Answer:
it B 114
Explanation:
The attraction that nonpolar molecules have for each
other is primarily caused by the presence of
Answer:
Van der waals forces
Explanation:
I just know
For all six solutions tested during this experiment,
the
is always the same. That
means that it is a constant throughout the
experiment
You can infer from this experiment that the
difference in the solutions is due to the
which will cause different flame
colors.
Answer:
1. Chloride ion
2. Metal ion
3. The same as a sample with the identical metal ion.
Explanation: I Just took the quiz on Edge 2021
4. An atom is neutral because it has the same number of protons as it has:
electrons
O neutrons
O Neither... An atom isn't neutral!
Taking into account the constitution of an atom, an atom is neutral because it has the same number of protons as it has electrons.
Constitution of an atomAn atom is the smallest constituent unit of ordinary matter that has the properties of a chemical element.
Every atom consists of a nucleus in which neutrons and protons meet and energy levels where electrons are located.
The neutron is an electrically neutral subatomic particle, while the proton has a positive electrical charge. Electrons have a negative charge, move around the nucleus at different energy levels and are attracted to protons, positive in the atom through electromagnetic force.
Atom electrically neutralAn atom is considered electrically neutral when it has the same number of positive and negative charges. That is, an electrically neutral atom has the same number of protons (with a positive charge) and electrons (with a negative charge).
In summary, an atom is neutral because it has the same number of protons as it has electrons.
Learn more about atom electrically neutral:
brainly.com/question/1814899
brainly.com/question/2449569
#SPJ2
which si unit would be most appropriate for describing the lengeth of the shoe?
20 mL of 0.25 M of NH 3 is titrated with 0.40 M HCl. Calculate the pH of the solution after 20 mL HCl is added. Kb (NH3) = 1.8 × 10 −5.
a. 12.50
b. 7.00
c. 4.74
d. 1.12
Answer:
the pH of the solution after 20 mL HCl was added is 1.12
Option d) 1.12 is the correct answer
Explanation:
Firstly; number of mmols of NH₃ before addition of HCl = M x V = 0.25 x 20 = 5
Also number of mmols pf HCl added = M x V = 0.40 x 20 = 8
Number of mmols of NH₄Cl formed
= number of mmols of NH3 before addition of HCl = 5
Number of mmoles of HCl remained = 8 – 5 = 3
Therefore Total volume of solution = 20 + 20 = 40 mL
Molarity of HCl = 3 / 40 = 0.075 M
Molarity of NH₄Cl = 5 / 40 = 0.125 M
Therefore
Ka x Kb = 10⁻¹⁴
Ka x 1.8 x 10⁻⁵ = 10⁻¹⁴
Ka (NH₄Cl) = 5.56 x 10⁻¹⁰
[H+] from HCl = 0.075 M
[H+] from NH₄Cl = (Ka x C)^1/2
= (5.56 x 10⁻¹⁰ x 0.125)^1/2 = 8.34 x 10⁻⁶
Hence, [H+] from NH₄Cl is negligible.
pH = -log 0.075
pH = 1.12
Therefore the pH of the solution after 20 mL HCl was added is 1.12
Option d) 1.12 is the correct answer
Please solve quickly!!!
Answer:
18 oxygen atoms
Explanation:
in order to from the 6 molecules carbon dioxide and 6 molecules of water you will have a total of 18 oxygen atoms
Vsepr diagram for phcl2
