help me please i will mark as brainliest
​

Answer:

hydrometer

Explanation:

A hydrometer is an instrument used to determine specific gravity. It operates based on the Archimedes principle that a solid body displaces its own weight within a liquid in which it floats. Hydrometers can be divided into two general classes: liquids heavier than water and liquids lighter than water.

Answer:

The force is proportional to the area, for if we increase the area but keep the number of molecules per cubic centimeter the same, we increase the number of collisions with the piston in the same proportion as the area was increased.

Explanation:

more area =more space = more free for molecules = less pressure = less force.

The approximate temperature of the star as determined is D) 5500 K.

The Wien's displacement law relates the maximum wavelength of a body to its absolute temperature. Wien's displacement law states that:

λ = [tex]\frac{b}{T}[/tex]

where λ is the maximum wavelength of the body, b is the constant of proportionality and T is the absolute temperature.

Thus from the given question, λ = 525 nm (525 x [tex]10^{-9}[/tex]), and b = 2.9 x [tex]10^{-3}[/tex] mK.

So that,

525 x [tex]10^{-9}[/tex] = [tex]\frac{2.9*10^{-3} }{T}[/tex]

Make T the subject of the formula to have;

T = [tex]\frac{2.9*10^{-3} }{525*10^{-9} }[/tex]

  = 5523.81

T = 5523.81 K

T ≅ 5500.00 K

The approximate temperature of the star in Kelvin is 5500 K.

For more clarifications, kindly visit: https://brainly.com/question/20038918

As you stretch the band a distance x, the force you need to exert has a magnitude of (250 N/m) x.

So if 100 N is required to stretch it to maximum length, then this length is x such that

100 N = (250 N/m) x   ==>   x = (100 N)/(250 N/m) = 0.4 m

Answer:

0.6

Explanation:

I got it right

Answer:

check photo

Explanation:

We should connect the three bulbs in parallel in order to allow at least one bulb to use maximum power.

We have a 20 V power source and three lightbulbs that have the same resistance.

We have to design a circuit that would allow at least one bulb to use maximum power.

For parallel combination of resistances, the total resistance will be -

[tex]\frac{1}{R_{T} } =\frac{1}{R(1)} +\frac{1}{R(2)} +\frac{1}{R(3)} \\[/tex]

We know that the power dissipated by the resistance is equal to -

P = V x I = [tex]I^{2} R[/tex] = [tex]\frac{V^{2} }{R}[/tex]

Let the three bulbs be B(1), B(2) and B(3) each with resistance ' R '. In parallel combination of the bulbs, the voltage across each bulb will be same as that of power source -

V [B(1)] = V [B(2)] = V [B(3)] = 20 V

Therefore, the power used by each bulb will be -

P [B(1)] = P [B(2)] = P [B(3)]  = [tex]\frac{20\times 20}{R}=\frac{400}{R}[/tex]

Whereas, in series combination the voltage drop will regularly take place after the current passes through a resistor.

Hence, we should connect the three bulbs in parallel in order to allow at least one bulb to use maximum power.

To solve more question on Power use, visit the link below -

https://brainly.com/question/22103646

#SPJ2

Answer:

As the stone is falling totally under the influence of gravity and toward the earth surface the acceleration is due to gravity and positive. Hence acceleration due to gravity,g is 4m/s²

Answer:

the physical properties and phenomena of some thing.

In explannation

Physics is a branch of science. It is one of the most fundamental scientific disciplines. The main goal of physics is to explain how things move in space and time and understand how the universe behaves. It studies matter, forces and their effects. The word physics comes from the Greek .

Please mark me as brainlist

Answer:

The distance covered is 40 m and the displacement is 31,6m.

Explanation:

The distance covered is the sum of the two distances (10+30). The displacement is equal to the distance of the hipotenusa of the triangle that the two distances (10 m to north and 30m to east) create. Using the Pythagoras theorem the displacent is equal to the Square root of (30^2 +10^2) .

Answer:

the pendulum differs from 300 inches

Answer:

50/0.04= answer

Answer:

According to Arrhenius definition, an acid is a substance that releases hydrogen ion or hydronium ion.

there are also other definition like bronsted and lewis.

I HOPE IT WILL HELP

Blocks x and y exerts action-reaction forces on each other with 146.1 N and 53.1 N respectively.

The given parameters:

mass of block x = 10 kg

mass of block y = 5 kg

magnitude of the frictional force of block x = 8 N

magnitude of the frictional force of block y = 4 N

the applied force to the right = 40 N

To find:

The block y pulls block x to the left with the following reaction forces;

Force of block y = force due to its own weight + frictional force

where;

g is the acceleration due to gravity = 9.81 m/s²

Thus, block y reacts on block x with a force of 53.1 N

The block x acts on block y towards the right direction with following forces;

Force of block x on y =  force due to its own weight + frictional force + applied force to the right

Thus, block x acts on block y with a force of 146.1 N

Learn more here: https://brainly.com/question/20709953

it takes 6 hours to travel back to Hyderabad

Answer:

This isn't a question... Next time please ask a question.

Explanation:

Answer:

Anatomy is the study of the structure and relationship between body parts.

Physiology is the study of the function of body parts and the body as a whole.

Explanation:

Answer:

The word ‘radiation’ is used to describe particles or waves that are emitted by an object  

In physics, radiation is the emission or transmission of energy in the form of waves or particles through space or through a material medium. This includes: electromagnetic radiation, such as radio waves, microwaves, infrared, visible light, ultraviolet, x-rays, and gamma radiation (γ)

Explanation:

There are four major types of radiation: alpha, beta, neutrons, and electromagnetic waves such as gamma rays. They differ in mass, energy and how deeply they penetrate people and objects.

The first is an alpha particle. These particles consist of two protons and two neutrons and are the heaviest type of radiation particle. Many of the naturally occurring radioactive materials in the earth, like uranium and thorium, emit alpha particles

The second kind of radiation is a beta particle. It's an electron that is not attached to an atom. It has a small mass and a negative charge. Tritium, which is produced by cosmic radiation in the atmosphere and exists all around us, emits beta radiation. Carbon-14, used in carbon-dating of fossils and other artifacts, also emits beta particles. Carbon-dating simply makes use of the fact that carbon-14 is radioactive. If you measure the beta particles, it tells you how much carbon-14 is left in the fossil, which allows you to calculate how long ago the organism was alive.

The third is a neutron. This is a particle that doesn't have any charge and is present in the nucleus of an atom. Neutrons are commonly seen when uranium atoms split, or fission, in a nuclear reactor. If it wasn't for the neutrons, you wouldn't be able to sustain the nuclear reaction used to generate power.

The last kind of radiation is electromagnetic radiation, like X-rays and gamma rays. They are probably the most familiar type of radiation because they are used widely in medical treatments. These rays are like sunlight, except they have more energy. Unlike the other kinds of radiation, there is no mass or charge. The amount of energy can range from very low, like in dental x-rays, to the very high levels seen in irradiators used to sterilize medical equipment.

Answer:

Velocity= 3[tex]ms^{-1}[/tex]

Explanation:

Formula to find velocity = Displacement/time taken

therefore, velocity= 15/5 ➤ Velocity = 3 [tex]ms^{-1}[/tex]

Answer:

1. b

2. e

3. a

4. c

5. d

hope dis helps ^-^

Answer:

increase in mass of body

Answer:

gsbddgshdhsghhdhdhvvs

When,a man stands still on a moving walkway that is going at a speed of 0.2 m/s to the west,then the velocity of the man according to a stationary observer would be 0.2 m/s west,Therefore, the correct answer would be option B.

The total displacement covered by any object per unit of time is known as velocity. The velocity of an object is depend on the magnitude as well as the direction of the object.

the mathematical expression for velocity is given by

velocity = total displacement /time

The speed and velocity of the object are very different from each other because speed does not depend upon the direction of the moving  object but velocity depends on the magnitude of speed as well as the direction of the moving object.

As per given in the problem a man stands still on a moving walkway that is going at a speed of 0.2 m/s to the west therefore from the perspective  of a stationary observer the velocity of man would be 0.2 m/s towards West.

Hence the correct options for the problem would be option B.

Learn more about Velocity from here

brainly.com/question/18084516

#SPJ2

One of the scientist's jobs is to report the results of his experiments to all the other scientists in the world.

There isn't a single real science shop anywhere in the world that uses the US customary system of units. Not one.

Even in the measly three countries that use it for measuring carpet, pumping gas, and weighing fish ... Myanmar, Liberia, an the USA ... the scientists do their work in the SI/MKS/metric system.

5 N

Archimedes' Principle

25 N

Answer: C) the thickness of a sheet of paper.

Explanation:

A micrometer screw gauge is a tool that measures distances (in order of millimeters), from this, we can see that the correct option is C: the thickness of a sheet of paper.

Now let's expand on this.

Knowing that the micrometer only can measure distances, we need to analyze which of the options is only a distance.

Notice that while area and volume have similar units, are really different things.

So analyzing the options we have:

A) "the area of a sheet of paper"

To find the area we need two measures (length and width) and then multiply this, but with a micrometer, we never measure the length of a sheet of paper (the maximum measure that you can get in a micrometer is of a few centimeters).

B) "the mass of a sheet of paper"

We can't measure mass with a micrometer.

C) " the thickness of a sheet of paper"

The thickness of a sheet of paper is of the order of 1mm, so we can easily measure this with a micrometer screw gauge.

D) " the volume of a sheet of paper​"

We have a similar problem as the one seen in A.

Then the correct option is C.

If you want to learn more, you can read:

https://brainly.com/question/16017208

Answer:

The gross (or macroscopic) anatomy: The study of anatomical features visible to the naked eye, such as internal organs and external features.

The microscopic anatomy: The study of minute anatomical structures on a microscopic scale, including cells (cytology) and tissues (histology).

Answer:

To find the horizontal component, we multiply the magnitude of the vector by the cosine angle referenced to the horizontal. To find the vertical component, we do the same thing, but take the sine angle.

Answer: i think c

Explanation:QA: “What is ordinary glass made of ?”

Glass is mostly silica, or silicon dioxide, present as quartz in many types of sand. Pure silica forms a highly transparent glass, but has a very high melting or softening temperature, around 1700°C. Even at such high temperatures it is highly viscous and difficult to work. Its use is largely confined to applications requiring high transparency to ultra-violet and infra-red radiation, stability at elevated temperatures or low thermal expansion coefficient.

“Ordinary glass” windows and drinking vessels are typically made from soda-lime glass, containing silica with around 25% sodium, calcium and other oxides, which together reduce the softening temperature to roughly 500–600°C

Answer: Well we see that v= u- ft/m

lets say that ft= feet and m= mass

so you divide those and subtract u

leaving you with the value of v which is 13

Answer:

ok

Explanation:

Acceleration is defined as the rate of change of velocity.

Acceleration = (Change in velocity) / time taken

Acceleration = (Final velocity - initial velocity) / time

As the object velocity changes by the same amount in each second, it means the acceleration is constant.