To create an electromagnetic field, a magnetic and electric field is involved.
An Electromagnetic field planElectromagnetic field consists of both electric and magnetic fields which are produced by human activities through the use of electricity.
With the above definition of electromagnetic field, it's production will involve:
Magnetic field: These fields are created by the magnets.Electric field: These fields are created by electric charges.These fields oscillate in perpendicular planes with respect to each other, and are in phase.
Therefore, to create an electromagnetic field, a magnetic and electric field is involved.
Learn more about electromagnetic field here:
https://brainly.com/question/1594186
Answer:
I need this as well
Explanation:
If the poster got the project, please let me know. I'm struggling on this unit and if you don't want to give out the project, help is appreciated too! thanks
10. Explain the principle of electric motor. Write its uses.
Explanation:
The principle of an electric motor is based on the current carrying conductor which produces magnetic field around it. A current carrying conductor is placed perpendicular to the magnetic field so that it experiences a force.
The largest electric motors are used for ship propulsion, pipeline compression and pumped-storage applications with ratings reaching 100 megawatts. Electric motors are found in industrial fans, blowers and pumps, machine tools, household appliances, power tools and disk drives.
State any ten reasons why students in Uganda need to study physics?use examples of the possible technological advancements which can be made using the knowledge of physics
Answer:
1.it also hleps us to became doctors becuase without physics you can't be a doctor
2.physics needs to be steady whether you like it or not it helps you in life so everybody must study physics no matter is in Uganda USA and plenty more countries there must be physics to dare to be studied
The question is given in the picture below.... please help me and mention all the steps..
Answer:
a)water is turning into ice it is changing it's state from liquid to solid
b)B to C ice is melting and it is changing it's state from solid to liquid
C to D water is boiling and it is changing it's state from liquid to vapours(steam)
c) temperature
At A 0
At B 0
At C 100
At D 100
Explanation: The temperature will remain 0 degrees Celsius until all the ice becomes water and the temperature will remain 100 degrees Celsius until all the water changes into steam.
Which of the elements below have seven electrons in their outermost energy levels? A.) Cr, Mn, and Fe B.) Br, I, and Ci C.) O, S, and Se D.) He, Ne, and Ar
Answer:
B
Explanation:
the Halogen families have 7 valence electrons
People who get population education are also aware of health issues and environment education justify
why does apparent depth of different liquids vary
If the ring rolls (without slipping) all the way to point 2, what is the ring's energy at point 2 in terms of h2 and v2?
Answer:
Following are the response to the given question:
Explanation:
[tex]F_2=mgh_2+\frac{1}{2}mv_2^2+\frac{1}{2}mR^2(W)^2\\\\\therefore \\\\ \to WR=v_2\\\\E_2=Mgh_2+MV_2^2[/tex]
If the force on a spring is 2 N and it stretched 0.5 m, what is the spring constant?
O A. 2 N/m
OB. 0.2 N/m
OC. 0.4 N/m
OD. 4 N/m
answer is
0.4n/mSuppose the charged sphere is made from a conductor, rather than an insulator. Do you expect the magnitude of the force between the point charge and the conducting sphere to be greater than, less than, or equal to the force between the point charge and an insulating sphere
Answer:
* Point charge outside the radius of the sphere r> R, the force in the two systems is the same
* Point charge inside the sphere r <R, therefore the force in the system with the insulating sphere is greater
Explanation:
To answer this question let's use the relation
F = q E
with q being the point charge and E the electric field created by the sphere.
If we use Gauss's law
The electric field flux is proportional to the wax charge within the surface.
Let's analyze our situation.
* Point charge outside the radius of the sphere
r> R
where R is the radius of the sphere and r the distance from the center of the sphere to the point charge
in this case the waxed charge for the insulating and conducting sphere is the same, therefore the force in the two systems is the same
* Point charge inside the sphere
r <R
conductive sphere.
As the charges are mobile, they are located on the surface of the sphere and there is no waxed charge within a Gaussian surface that passes through the point charge, therefore the electric field is zero and consequently the force
F = 0
insulating sphere
Charges cannot move therefore there is a fraction of charge within a surface that passes through the point charge, consequently the electric field is different from zero
Fe> 0
for this second position the force on the conducting sphere is zero
therefore the force in the system with the insulating sphere is greater
Will mark brainlest helpp!!!!!!
Answer:
I don't know if it is correct or not.
Convert to m/s
[tex]\\ \Large\sf\longmapsto v=60\times \dfrac{5}{18}=16.6m/s[/tex]
Time=t=5min=5×60=300sWe know
[tex]\boxed{\Large{\sf Acceleration=\dfrac{v-u}{t}}}[/tex]
[tex]\\ \Large\sf\longmapsto Acceleration=\dfrac{16.6-0}{300}[/tex]
[tex]\\ \Large\sf\longmapsto Acceleration=\dfrac{16.6}{300}[/tex]
[tex]\\ \Large\sf\longmapsto Acceleration=0.05m/s^2[/tex]
Distance=sUsing second equation of kinematics
[tex]\boxed{\Large{\sf s=ut+\dfrac{1}{2}at^2}}[/tex]
[tex]\\ \Large\sf\longmapsto s=0(300)+\dfrac{1}{2}(0.05)(300)^2[/tex]
[tex]\\ \Large\sf\longmapsto s=0.05\times 150^2[/tex]
[tex]\\ \Large\sf\longmapsto s=0.05\times 22500[/tex]
[tex]\\ \Large\sf\longmapsto s=1125m[/tex]
why football players boots have spikes their sole
Give short and sweet answer
Answer:
it helps with balance and speed.
"The football shoes have spikes or studs because the studs or spikes provides larger frictional force than normal shoes while running on the grass. The studs prevents player from slipping on the grass and help to run faster and change direction quickly without slipping"
Answer:
they provide a larger frictional force than normal shoes while running on the grass.
why do black holes have a large gravitational pull that even light cannot escape from
Answer:
Because matter has been squeezed into a tiny space.
Explanation:
According to NASA, this can happen when a star is dying.
A black hole has no more gravity than the same amount of matter in any other form.
But remember that the gravitational forces are stronger as you get closer to the center of the body. The mass of a black hole is packed into such a small size (theoretically zero !) that you can get very close to its center. THAT'S where its gravity is hugely strong.
Ignore friction. A 20. Lb. Object was lifted to a height of 10 feet by a force of 30. Lb. (a) How much work (ft.Lb) is done by the force? (b) Find the change in potential energy (ft.Lb) of the object
(a) The work done by force in lb-ft is 300 lb-ft.
(b) The change in potential energy of the object is 200 lb-ft.
Work done by forceThe work done by force in lb-ft is calculated as follows;
W = Fd
W = 30 x 10
W = 300 lb-ft
Change in potential energyThe change in potential energy of the object is calculated as follows;
ΔP.E = P.Ef - P.Ei
ΔP.E = 20 x 10 - 0 = 200 lb-ft
Learn more about work done here: https://brainly.com/question/8119756
#SPJ2
Un cuerpo es saltado desde cierta altura , llegando al piso luego de 7 s. Determine de altura se le soltó . (g=10m/segundo al cuadrado )
Answer:
Maximum height, H = 35 meters
Explanation:
Given the following data;
Time = 7 seconds
Acceleration due to gravity, g = 10 m/s²
To find the maximum height;
Mathematically, the maximum height is given by the formula;
H = ½gt²
H = ½ * 10 * 7
H = 5 * 7
Maximum height, H = 35 meters
Quả bóng 200g chuyển động với v 4m/s đập vào tường rồi bật ra ngược chiều với cùng tốc độ độ biến thiên động lượng của quả bóng là
A converging lens of focal length 20cm, forms a real image twice the size of the object. Calculate:
i) the power of the lens;
ii) the position of the image.
Answer:
Solition given:
focal length(f)=20cm
size of image(v)=2x
size of object(u)=x
we have
power of lens= reciprocal to focal length=1/20=0.05/cm
ii.
the position of the image is beyond C.
Explanation:
See the attachment !!!!!!!
Two forces of equal magnitude F
have a resultant of the same
magnitude F. The angle between the
two forces is
45°
120°
O 60°
O 35°
Answer:
the ans is 120 degree hope it will help
calculate the mass 9f the earth, assuring that uts is sphere with radius 6.67×10^6m.
Answer:
6.86 × 10²⁴ kg
Explanation:
The mass of the earth m = density of earth, ρ × volume of earth, V
m = ρV
The density of the earth, ρ = 5515 kg/m³ and since the earth is a sphere, its volume is the volume of a sphere V = 4πr³/3 where r = radius of the earth = 6.67 × 10⁶ m
Since m = ρV
m = ρ4πr³/3
So, substituting the values of the variables into the equation for the mass of the earth, m, we have
m = 5515 kg/m³ × 4π(6.67 × 10⁶ m)³/3
m = 5515 kg/m³ × 4π × 296.741 × 10¹⁸ m³/3
m = 5515 kg/m³ × 1189.9639π × 10¹⁸ m³/3
m = 6546105.64378π × 10¹⁸ kg/3
m = 20565197.400122 × 10¹⁸ kg/3
m = 6855065.8 × 10¹⁸ kg
m = 6.8550658 × 10²⁴ kg
m ≅ 6.86 × 10²⁴ kg
Enlight the contribution of science and technology for current pandemic of Corona virus??
The vaccine ofcourse. They helped in making the vaccine.
Ра:
5. Mass of the earth is 6x10-kg and its radius is 6400km. What is the
mass of a man weighting 977N?
(99.99kg)
ma
Orth
be
Answer:
what do u need help with
Explanation:
Pа: 5. Mass of the earth is 6x10-kg and its radius is 6400km. What is the mass of a man weighting 977N? (99.99kg) ma. Orth be.
A railroad car (with a mass of 3250 kg) moves at 8.1 m/s . It collides with and couples to another car that was initially at rest. After the collision, the two cars move together at a speed of 4.50 m/s. What is the mass of the second car?
Answer:
m_2 = 2600kg
Explanation:
P_1 = P_2
P = (m_1)*(v_1)+(m_2)(v_2)
P_1 = (3250kg)(8.1m/s)+(m_2)(0m/s)
P_1 = 26,325 kg*m/s
P_2 = (3250kg)(4.5m/s)+(m_2)(4.5m/s)
P_2 = 14,625kg*m/s+(4.5m/s)m_2
26,325 kg*m/s = 14,625kg*m/s+(4.5m/s)m_2
11,700kg*m/s = (4.5m/s)m_2
m_2 = 2600kg
Define derived unit with example
Answer:
A derived unit is a SI unit of measurement comprised of a combination of the seven base units. Like SI unit of force is the derived unit, newton or N where N=s21×m×kg. There are some commonly used derived units which includes: 1. Pressure = AreaForce=m2N.
Explanation:
Si la fuerza de fricción cinetica es 250N ¿Qué fuerza se necesita para mantener a la caja deslizándose a una velocidad constante ¿
Answer:
250N
Explanation:
According to newton second law,
\sumF = ma
Fm - Ff = ma
Since the velocity is constant, a = 0m/s
Frictional force Ff = 250N
Substitute
Fm - 250 = m(0)
Fm - 250 = 0
Fm = 250N
Hence the force to keep the box sliding at constant speed is 250N
Answer:
am I the only one seeing blink
the value of 1.0004 to the power 1 by 2 using Binomial approximation is
Given:
The given value is [tex](1.0004)^{\frac{1}{2}}[/tex].
To find:
The value of the given expression by using the Binomial approximation.
Explanation:
We have,
[tex](1.0004)^{\frac{1}{2}}[/tex]
It can be written as:
[tex](1.0004)^{\frac{1}{2}}=(1+0.0004)^{\frac{1}{2}}[/tex]
[tex](1.0004)^{\frac{1}{2}}=1+\dfrac{1}{2}\times 0.0004[/tex] [tex][\because (1+x)^n=1+nx][/tex]
[tex](1.0004)^{\frac{1}{2}}=1+0.0002[/tex]
[tex](1.0004)^{\frac{1}{2}}=1.0002[/tex]
Therefore, the approximate value of the given expression is 1.0002.
A 250–g piece of gold is at 19 °C. 5.192 kJ of energy is added to it by heat. The specific heat of gold is 129 J/(kg·°C). Calculate its final temperature.
We heat a 25–g sample of metal from 10 °C to 100 °C. 1.082 kJ of energy is added to it by heat. Calculate
the specific heat of the metal.
Answer:
A. DT is given by Q= MCs DT
m = mass of the substances
Cs= is it's specific heat capacity
Ck= Q
Mk ×DTk
=250 × 9 × 5
129
=Dt = 180.1085271
answer is 180degree C.
Explanation:
B. = 25×10 ×100
1.082
=2500
1.082
= 23105.360 g/kj.
The final temperature is 180 degree. and the specific heat of the metal is 23105.360 g/kj.
How to calculate the specific heat?Q = m . C . ΔT
Q = heat; m = mass; C is the specific heat and
ΔT = Final T° - Initial T°
Q = C lat . m
Q = Heat
m = mass
C lar = Latent heat of fusion
A) DT is given by Q= M Cs DT
where, m = mass of the substances
Cs= is it's specific heat capacity
Ck= Q
Mk × DTk
=250 × 9 × 5
129 =Dt = 180.1085271
Thus, the final temperature is 180 degree.
B) We heat a 25–g sample of metal from 10 °C to 100 °C. 1.082 kJ of energy is added to it by heat = 25×10 ×100
=2500
1.082
Q = 23105.360 g/kj
Hence, the specific heat of the metal is 23105.360 g/kj.
Learn more about heat here;
https://brainly.com/question/12909121
#SPJ2
Which of the following is true of highly conductive elements?
Answer:
A
Explanation:
i think a is the answer because if you take an example of group 1 and 2 metals on the periodic table you will notice that they are highly reactive but they have a few electrons in their outer most shells.
I hope this helps
please answer fast..........
Answer:
The correct answer is a. Subsonic
Hope this helps you^_^
Please mark as Brainliest.
How can we drop eggs the fewest amount of times without breaking it?
Answer:
drop in water
Explanation:
follow me m mm m
What is the relation between the weight of a body and acceleraton due to gravity?
Answer:
All objects on Earth, regardless of their mass, accelerate due to gravity at the same rate - that is, 9.8 m/sec2. The weight of an object can be calculated using the formula for force - F = m * a - where F equals the weight of the object and now the acceleration (a) is the acceleration of gravity (g).
