GUYS PLEASE HELP ME THIS IS FOR MY FINAL !!!

Answer:

option b is correct..................

Answer:

5/3 m/s or

6 km/h

Explanation:

really ? the average speed is just the straight connection in the graph from A to D.

that means the travel time was 40-10 seconds = 30 seconds.

and the distance traveled was 60-10 = 50 meters.

so, the average speed was

50 meters / 30 seconds

to bring this to standard m/s

5 m / 3 s = 5/3 m/s

or to standard km/h

an hour has 60 minutes or 120 30-seconds intervals

50 m/ 30 s × 120/120 = 6000 m / h = 6 km/h

Answer:

Explanation:

We are basically needing to solve for the time in the equation d = rt, where d is the distance around Mars (aka the circumference), r is the velocity, and t is time. We need to find the circumference and the velocity. We will begin with the velocity.

Because the gravitational attraction between Phobos and Mars provides the centripetal acceleration necessary to keep Phobos in its (sort of) circular path, the equation we use for this is:

[tex]F_g=F_c[/tex] which says that Force supplied by gravity is equal to the centripetal force. Expanding that:

[tex]\frac{Gm_{Phobos}m_{Mars}}{r^2}=\frac{m_{Phobos}v^2}{r}[/tex]

When we move that around mathematically to solve for the velocity value, what we end up with is:

[tex]v=\sqrt{\frac{Gm_{Mars}}{r}[/tex] and filling in:

[tex]v=\sqrt{\frac{(6.67*10^{-11})(6.42*10^{23})}{9.38*10^6} }[/tex] and we get that

v = 2100 m/s

Now for the circumference:

C = 2πr and

C = 2(3.1415)(9.38 × 10⁶) so

C = 5.9 × 10⁷

Putting that all together in the C = vT equation:

5.9 × 10⁷ = 2100T so

T = 2.8 × 10⁴ sec or 7.8 hours

Answer:

La materia es la sustancia de la que está hecho todo material. En física, el sistema es una de las propiedades de la materia. Se puede transferir entre objetos y convertir en forma. No se puede crear ni destruir.

espero que te ayude!

Let m be the mass of both cubes. If the smaller cube has side length x, then its volume is x ³. The side lengths of the larger cube have length 4x, so the larger cube's volume is (4x)³ = 64x ³, or 64 times as large as the smaller cube.

The first cube has a density of m/x ³, while the larger one has a density of m/(64x ³) = 1/64 m/x ³, so the ratio of densities is (1/64):1, or 1:64 (larger cube to smaller cube).

Answer:

as we know

p=1/f

p=1/-40m

p=  -0.025d

you have written the unit of focal length wrong it is the unit of power

please mark as brainliest plzzzzzzzzzz

Reverberation, in psychoacoustics and acoustics, is a persistence of sound after the sound is produced

Explanation:

I think it is right hope its helps

Answer:

D. A single sound undergoes several reflections due to multiple reflecting surfaces.

Explanation:

Sometimes, the source of a sound is surrounded by multiple reflecting surfaces. The waves traveling from the source strike these different surfaces, causing multiple reflections. For example, a single clap of thunder reflects on several clouds and the earth's surface, causing you to hear a rolling rumble instead of a single sound.

Answer:

Be serious or else CEO of brainly will kick you out

Answer:

78.34

Explanation:

1.3/30=78.3m

Answer:

The laws of liquid pressure are  

(i) Pressure inside the liquid increases with the depth from the free surface of the liquid.

(ii) Pressure is same at all points on a horizontal plane, in case of stationary liquid.

(iii) Pressure is same in all directions about a point inside the liquid.

(iv) Pressure at same depth is different in different liquids. It increases with the increase in the density of the liquid.

(v) A liquid will always seek its own level.

A Fluid is any liquid or gas or generally any material that cannot sustain a tangential, or shearing, force when at rest.  

Explanation:

Answer:

Amur Leopard, Southeastern Russia, and northern china

Explanation:

Answer:

Amur Leopard    China/Russia

Hawks bill Turtle   live in Oceans

Answer:

E) The indoor pollution experts' research shows that the amounts of lead that come into contact with the air people breathe, even in the office buildings that used the greatest amount of paint, are too low to affect workers

Explanation:

Answer:

Resistance is defined as the property of a conductor to resist the flow of charges through it. The resistance of conductor is numerically given as the ratio of potential difference across its length to the current flowing through it.

Explanation:

Answer:

20m in 2 secs

Explanation:

t=2s

s=20m

hence the maximum height reached by stone is 20m in 2 s

Explanation:

Measurement is defined as the act of measuring or the size of something. An example of measurement means the use of a ruler to determine the length of a piece of paper. An example of measurement is 15" by 25". ... The dimension, quantity, or capacity determined by measuring.

Measurement refers to the comparison of unknown physical quantity with a known quantity.

for eg. measurement of body while sewing clothes.......

Answer:

2PBr₃ + 3Cl₂ → 2PCl₃ + 3Br₂

2Na + MgCl₂ → 2NaCl + Mg

Explanation:

A balanced chemical equation is a chemical equation that have an equal number of elements of each type on both sides of the equation

Among the given chemical reactions, we have;

2PBr₃ + 3Cl₂ → 2PCl₃ + 3Br₂

In the above reaction;

The number of phosphorus, P, on either side of the equation = 2

The number of bromine atoms, Br, on either side of the equation = 6

The number of chlorine atoms, Cl, on either side of the equation = 6

Therefore, the number of elements in the reactant side and products side of the reaction are equal and the reaction is balanced

The second balanced chemical reaction is 2Na + MgCl₂ → 2NaCl + Mg

In the above reaction, there are two sodium atoms, Na,  one magnesium atom and two chlorine atoms on both sides of the reaction, therefore, the reaction is balanced

The term that best describes the landform "dip in a mountain range" is C. Syncline.

Syncline is a term to refer to a fold of the Earth's crust caused by the tectonic effects of the earth's dynamics. A synclinal fold is characterized by being a concave fold, that is, in the shape of a U.

According to the above, answers A, B and D are not correct options because they refer to different shapes of the Earth. Therefore, the landform shown is syncline.

Learn more at: https://brainly.com/question/17137827

Answer: C

Explanation: E2022

Answer:

40 cm

Explanation:

We are given that

Load=800 N

Effort=200 N

Load  distance=10 cm

We have to find the effort distance.

We know that

[tex]load\times load\;distance=Effort\times effort\;distance[/tex]

Using the formula

[tex]800\times 10=200\times effort\;distance[/tex]

Effort distance=[tex]\frac{800\times 10}{200}[/tex]

Effort distance=[tex]\frac{8000}{200}[/tex]

Effort distance=40 cm

Hence,  the effort distance will be 40 cm.

Respuesta:

$138.39

Explicación:

Paso 1: Calcular el total que gastaron

El total que gastaron es igual a la suma de los que gastó cada uno.

$50.00 + $28.50 + $20.50 + $10.80 + $22.00 = $131.80

Paso 2: Calcular el 5% de $131.80

$131.80 × 5% = $6.59

Paso 3: Calcular el total que pagó con la tarjeta

A los $131.80 que gastaron debe sumarle los $6.59 por el uso de tarjeta.

$131.80 + $6.59 = $138.39

Answer:

why is fraction called a necessary evil

The heat for a temperature in plastic increases at the range of 50°C to 100°C then the plastic decreases its stiffness or flexural modulus.

It is given that the temperature is increased from 50°C to 100°C that means temperature is increasing.

It is required to state the effect of increase in heat on plastic.

The plastic starts to lose its stiffness or we say that it converts into a softened material as long as we increase the temperature of the material.

So if we increase the temperature too much or exceed above the limit of temperature range then it will distort.

Also there are many qualities that can be affected by increasing the temperature like mechanical property, material fatigue or chemical phenomenon.

Therefore, the heat for a temperature range of 50°C to 100°C

Plastic increases then the plastic decreases its stiffness or flexural modulus.

Learn more about the range of temperature here:

https://brainly.com/question/11316625

#SPJ5

Answer:

It was created during the French Revolution in 1799 and has enabled for the international exchange of scientific and technical information. Calculating with SI units is also a lot easier than using the English system.

Explanation:

It was first developed during the French Revolution in 1799 and has allowed for the sharing of scientific and technical information on an international level. Performing computations using SI units is also much easier to use than the English system. Thanks

These two forces are called action and reaction forces and are the subject of Newton's third law of motion. Formally stated, Newton's third law is: For every action, there is an equal and opposite reaction. The statement means that in every interaction, there is a pair of forces acting on the two interacting objects.

Answer:

La fuerza resultante sobre q₃ es  -1.2245 × 10⁻¹⁵ i  + -0.24 × 10⁻¹⁵ j

La magnitud de la fuerza resultante sobre q₃ es aproximadamente 1.25 × 10⁻¹⁵ N

Explanation:

q₁ = -45 μC = -45 × 10⁻⁶ C

r₁₂ = 30 mm = 30 × 10⁻³ m

q₂ = 25 μC = 25 × 10⁻⁶ C

r₂₃ = 50 mm = 50 × 10⁻³ m

q₃ = 20 μC = 20 × 10⁻⁶ C

k = 9×10⁻⁹ N·m²/C²

Por lo tanto;

r₁₃ = √(50² + 30²) = 10·√(34)

F₁₂ = 9×10⁻⁹ × (-45 × 10⁻⁶)×(25 × 10⁻⁶)/(30 × 10⁻³)² = -1.125 × 10⁻¹⁴

F₁₂ = -1.125 × 10⁻¹⁴ N

F₂₃ = 9×10⁻⁹ × (20 × 10⁻⁶)×(25 × 10⁻⁶)/(50 × 10⁻³)² = 1.8 × 10⁻¹⁵ j

F₁₃ = 9×10⁻⁹ × (-45 × 10⁻⁶)×(20 × 10⁻⁶)/(10·√34 × 10⁻³)² = -2.38× 10⁻¹⁵

Los componentes de F₁₃ son;

-2,38 × 10⁻¹⁵ × cos (arctan (30/50)) = -2,04 × 10⁻¹⁵ j

-2,38 × 10⁻¹⁵ × sin (arctan (30/50)) = -1,2245 × 10⁻¹⁵ i

La fuerza resultante sobre la carga q₃, [tex]\left | \underset {F_3} \rightarrow \right |[/tex] = [tex]\underset{F_{13}}{\rightarrow}[/tex] + [tex]\underset{F_{23}}{\rightarrow}[/tex]

∴ [tex]\left | \underset {F_3} \rightarrow \right |[/tex] = 1.8 × 10⁻¹⁵ j + -1.2245 × 10⁻¹⁵ i + -2.04 × 10⁻¹⁵ j

La fuerza resultante sobre q₃ es [tex]\left | \underset {F_3} \rightarrow \right |[/tex]  = -1.2245 × 10⁻¹⁵ i  + -0.24 × 10⁻¹⁵ j

La magnitud de la fuerza resultante sobre q₃,

[tex]\left | F_3 \right |[/tex] = √((-1.2245 × 10⁻¹⁵)² + (-0.24 × 10⁻¹⁵)²) ≈ 1.25 × 10⁻¹⁵

La magnitud de la fuerza resultante sobre q₃, [tex]\left | F_3 \right |[/tex] ≈ 1.25 × 10⁻¹⁵ N.

Answer:

tôi đoán lagf  pjhAWN ỨNG HÓA HỌC

Explanation:

Answer:

Explanation:

There are three modes of heat transfer.

1. Conduction: It is the mode of heat transfer when the object is in contact with hot body and gradually the heat transfer from the hot end to the cold end.

2. Convection: It is the mode of heat transfer in which the molecules gets heated and moves up and the cold molecules comes down and the process continues till the entire liquid or gas is at same temperature.

3. Radiation: It is the process of heat transfer in which the heat is transferred in the form of heat waves.

(a) When the cook pot is placed on flame, it is the example of conduction.

(b) When the liquid is placed on the flame in a container, the liquid gets heated by the mode of convection.  

(c) We feel heat as we stand near the flame so it is the example of radiation.

(d) because the heat is trapped so it becomes hot in lesser time.

Answer:

Copper isn't ferromagnetic,

Aluminum isn't ferromagnetic,

String has a ferromagnetic property

So in conclusion:

The answer is strings :)

If the sound comes from the right side, the waves reach the right ear before the left ear. if the sound comes from the left side, the waves reach the left ear before the right ear. The difference between the phases of waves reaching both ears is detected by the ears and then interpreted by the brain

Answer:

Please find attached, the required wave drawn with MS Excel

Explanation:

Functions that represent waves is given as follows

A general form of the wave equation is A·sin(B·x) + D

Where;

B = 2·π/T

T = The period of the wave = 1/f

D = The vertical shift of the wave = 0

A = The amplitude of the wave = 1 for sine wave

v = The wave velocity

λ = The wavelength of the wave

f = The frequency of the wave

v = f·λ

At constant v, λ ∝ 1/f  

∴ λ ∝ T

Where T = 3, we have;

B = 2·π/T

∴ B = 2·π/3

Therefore, we have the wave with an amplitude of 1 cm, and wavelength, 3 cm, given as follows

y = sin((2·π/3)·x)

Plotting the above wave with MS Excel, we can get the attached wave

Answer:

0 deg C = 4.81E4     pressure at 0 deg

100 deg C = 6.48E4     pressure at steam point

100 deg C - 50 deg C = (6.48 - 4.81) * 10^4 = 1.67E4 Pa

50 deg C = 50 / 100 * 1.67E4 + 4.81E4 = 5.65E4 Pa Just the halfway point between the two given pressures