Answer:
Humans naturally have what's known as binaural hearing, which is the ability to hear in two ears.
When the apple fall towards tje earth tje earth move up to meet the apple.Os it true.If yes why is the earth motion not noticeable
Answer:
Explanation:
It was Newton's genius that saw that it was true. He also realized that if it was true, the motion the earth experience would be unmeasurably small, especially in his time. Their instruments were just not good enough: crude and too approximate would be better descriptions.
Wagonium-292 has a half-life of 1 hour. If you started with an 80 gram sample, how much Wagonium-292 will remain after 4 hours? A.) 10g B.) 40g C.) 160g D.) 5G
After 1 hour, 80 g decays to 40 g.
After another hour (total 2 hours), 40 g decays to 20 g.
After another hour (total 3), 20 g decays to 10 g.
After one more hour (total 4), 10 g decays to (D) 5 g.
how many significant figures 216 m
Answer:
Three
Explanation:
I hope this helps:)
Calculate the force of gravitation between two objects of masses 50 kg and 120 kg respectively, kept at a distance of 10 m from one another.
Answer:
Answer
F=G×
d
2
m×M
m = 50 kg
M = 120 kg
Distance, d = 10 m
G=6.7×10
−11
Nm
2
/kg
2
F=6.67×10
−11
×
10
2
50×120
F=6.67×60×10
−11
F=4.02×10
9
N
Answer:
=4.002×10-⁷
Explanation:
(6.67×10-¹¹ ×50×120)/10²
=4.002×10-⁷
What do is mean by environment friendly behaviour?
Convert 60 kg to mg using the method of dimensional analysis
600,000
PLEASE MARK AS BRAINLIEST ANSWER
An 8μC charge is moving through a 10T magnetic field at a speed of 2.5⋅107 m/s perpendicular to the direction of the field. What is the force on the charge?
check photo for solution
Answer:
THIS IS YOUR ANSWER
HOPE IT HELPS YOU
Please help me. I need this in a few hours.
Answer:
A) The population of prey is greater than that of predator
.............................
Bagaimanakah pelembapan bagi suatu sistem ayunan dapat diatasi dengan resonans?
Answer:
Those reaction in which one element replaces another element form its place is called Single displacement reaction
what's is acceleration. ?????
Answer:
Acceleration, rate at which velocity changes with time, in terms of both speed and direction. A point or an object moving in a straight line is accelerated if it speeds up or slows down. ... Acceleration is defined as the change in the velocity vector in a time interval, divided by the time interval.
Answer:
The rate of change in velocity with time A=finall velocity _intial velocity upon time
Calculate the acceleration of a bus that speed up from 20ms-1 to 40ms-1 in 8 seconds?
Answer:
2.5 ms^-2
Explanation:
acceleration
= (final velocity - initial velocity)/time
= [(40m/s) - (20m/s)]/8s
= (20m/s)/8s
= 5/2 m/s²
= 2.5 m/s²
= 2.5 ms^-2
a car is stationary at first.it moves off with.acceleration of 2m.s-2.Calculate how far it will move in 10s
Answer:
100 m.
Explanation:
At first the car was stationary, so its inicial velocity is zero. Considering its inicial position 0 m and using the Equation of motion for the position:
X(t) = Xo + vo.t +a[tex]t^{2}[/tex]/2 , vo=0, Xo=0, a=2m/[tex]s^{2}[/tex]
X(10) = (2 x [tex]10^{2}[/tex])/2 = 100 m.
The deflection plates in an oscilloscope are 10 cm by 2 cm with a gap distance of 1 mm. A 100 volt potential difference is suddenly applied to the initially uncharged plates through a 1075 ohm resistor in series with the deflection plates. How long does it take for the potential difference between the deflection plates to reach 65 volts
Answer:
20 ns
Explanation:
Since the deflection plates are in series with the resistor, the deflection plates act as a capacitor.
So, the set-up is a series RC circuit.
The voltage across the deflection plates V =
[tex]V = V_{0}(1 - e^{-\frac{t}{RC} } )[/tex]
where V₀ = voltage applied = 100 V, R = resistance of resistor = 1075 Ω and C = capacitance of deflection plates and t = time to reach 65 V
The capacitance of the deflection plates C = ε₀A/d where ε₀ = permittivity of free space = 8.854 × 10⁻¹² F/m, A = area of deflection plates = 10 cm × 2 cm = 20 cm² = 20 × 10⁻⁴ m² and d = distance between deflection plates = 1 mm = 1 × 10⁻³ m.
So, C = ε₀A/d
C = 8.854 × 10⁻¹² F/m × 20 × 10⁻⁴ m²/1 × 10⁻³ m
C = 177.08 × 10⁻¹⁶ Fm/1 × 10⁻³ m
C = 177.08 × 10⁻¹³ F
C = 17.708 × 10⁻¹² F
Since we require the time it takes the capacitor to reach 65 Volts, V = 65 and we make t subject of the formula,
So, [tex]V = V_{0}(1 - e^{-\frac{t}{RC} } )[/tex]
[tex]\frac{V}{V_{0}} = (1 - e^{-\frac{t}{RC} } )\\e^{-\frac{t}{RC} } = 1 - \frac{V}{V_{0}}[/tex]
taking natural logarithm of both sides, we have
-t/RC = ㏑(1 - V/V₀)
t = -RC㏑(1 - V/V₀)
Substituting the values of the variables into the equation, we have
t = -RC㏑(1 - V/V₀)
t = -1075 Ω × 17.708 × 10⁻¹² F㏑(1 - 65 V/100 V)
t = -19036.1 × 10⁻¹² ΩF㏑(1 - 0.65)
t = -19036.1 × 10⁻¹² ΩF㏑(0.35)
t = -19036.1 × 10⁻¹² × -1.0498 s
t = 19984.5189 × 10⁻¹² s
t = 1.99845189 × 10⁻⁸ s
t = 19.99845189 × 10⁻⁹ s
t ≅ 20 × 10⁻⁹ s
t ≅ 20 ns
So, the time it takes the potential difference between the deflection plates to reach 65 V is 20 ns.
an object is sliding down in clean plane the velocity change at a constant rate from 10 cm to 15 CM in 2 second what is it acceleration ?
Initial velocity=10m/s=u
Final velocity=v=15m/s
Time=t=2s
[tex]\boxed{\sf Acceleration=\dfrac{v-u}{t}}[/tex]
[tex]\\ \sf\longmapsto Acceleration=\dfrac{15-10}{2}[/tex]
[tex]\\ \sf\longmapsto Acceleration=\dfrac{5}{2}[/tex]
[tex]\\ \sf\longmapsto Acceleration=2.5m/s^2[/tex]
Answer: a = 2.5 cm/s²
Explanation:
Acceleration = (Final velocity - Initial Velocity)/time taken
a = v-u/t
Initial velocity = 10 cm/s
Final velocity = 15 cm/s
Time = 2 seconds
a = (15-10)/2
a = 5/2
a = 2.5 cm/s²
Therefore the acceleration is 2.5 cm/s²
please click thanks and mark brainliest if you like :)
Trên một đoạn đường thẳng AC cho điểm B nằm giữa AC sao cho BC = 4AB . Tại thời điểm t = 0 xe thứ nhất chuyển động đều qua A với tốc độ v1 hướng về C, xe thứ hai chuyển động đều qua B với tốc độ v2 cùng hướng với xe thứ nhất. Đến thời điểm t = 1.5h hai xe gặp nhau tại C. Biết rằng quảng đường mỗi xe đi dược trong một giờ hơn kém nhau 10km. Tính v1, v2 và khoảng cách từ A đến C.
Answer:
wuuwue eueueueuueueuueueueueueueueueeieueieieieieieueiueeuueueuueueuueueurururyyr it yttururururururururururururuur it ueue it ueuueeueueueueueeieueuueueeueiueue
# Astronaut fells weightlessness in a spacecraft why?
Answer:
......... ........ ... .... .... . .. .......
.....
Explanation:
........mmmmmmmmmmm
numerical filing method is more scientific why give me 4 reason
Answer:
Numerical Methods are mathematical way to solve certain problems.Whether the equations are linear or nonlinear, efficient and robust numerical methods are required to solve the system of algebraic equations.
Analytical solutions are exact solutions based on mathematical principles.
However, the governing partial differential equations of fluid flow are complex and cannot be solved by analytical means. The partial differential equations are therefore converted into a system of algebraic equations that are subsequently solved through numerical methods to provide approximate solutions to the governing equations.
Although we rarely reach on exact answer , we can get really close to the exact answer much quicker than solve analytically.
Answer:
oh my god
Explanation:
how long answer is this
Answer the following questions. 3 A student runs 2 m/s. What does this mean?
Answer:
2ms-¹ means that the body under consideration moves 2m in a second, and may be it will continue to move 2m in every 1 second, if there's no external unbalanced force acting on that body (those forces do include frictional forces). mark its brainlist plz. Kaneppeleqw and 6 more users found this answer helpful. Thanks 3.
Answer:
that the student has travels 2 meters every 1 second that passes
calculate the mass of material whose density is 0.798gcm and the mass of 25g
Answer:
Explanation:
Density = 0.798g/cm
Mass = 25g
The mass = 25/0.798
= 25/0.798
Mass = 31.6856780735 cm
= 31.69cm (Approx)
Please click thanks and mark brainliest if you like
The tin can with water in its bottom is heated to boil water and the steam is allowed to escape for some time. The open mouth is sealed with an air-tight cap and cooled under tap water. The tin can get crushed, why?
Explanation:
Water does expand with heat (and contract with cooling), but the amount of expansion is pretty small. So when you boil a can filled with water and seal it, the water will contract slightly as it cools. The can may kink slightly, but that will be it. Actually, most likely the only things you will be able to see is then top and bottom will be sucked in and go concave. Just like a commercial can of beans.
Now if you have a can with a little water and a big air space, things are completely different.
As the water boils, water vapour is given off. Steam. Let it boils for a minute just to make sure (nearly) all the air is expelled and the can is filled with steam.
Now when you put the lid on and cool the can, that steam condenses back to water, and goes from filling the can to a few drops of water. The can is now filled (if that is the right word) with a near vacuum, The air pressure, 15 lbs/square inch, will be pressing on every surface of the can, with nothing inside the can to resist it.
The can will crumple before your eyes.
Non-ideal behavior for a gas is most likely to be observed under conditions of a) high pressure and low temperature. b) high temperature and high pressure. c) high temperature and low pressure. d) standard temperature and pressure. e) low temperature and low pressure.
Answer:
high temperature and low pressure
Explanation:
Real gases have intermolecular forces of attraction between them hence they can be liquified. However, gases approach ideal behavior at high temperature and low pressure.
According to the kinetic theory of gases, gases molecules move at incredibly high speeds and exhibit no intermolecular interaction because the gas molecules are isolated from each other.
At high temperature and low pressure, gas molecules are found to possess maximum kinetic energy. They move with a very high velocity and have minimal intermolecular interaction between them in accordance with the proposition of the kinetic theory of gases.
How many inches are in 300 meters? Using the method of dimensional analysis
what is the shape of the line graph that shows the temperature change over time of the liquid before it starts to boil?
The line graph showing the temperature change over time of a liquid before it boils has an upward-sloping trend as heat is applied until it reaches its boiling point, with fluctuations due to heat transfer rate changes.
What is the heat transfer rate?Heat transfer rate refers to the amount of heat energy transferred per unit of time between two objects or substances that are at different temperatures. It is a measure of how quickly heat is transferred between two objects or substances and is influenced by factors such as the temperature difference between the objects, the thermal conductivity of the materials, the surface area in contact, and the type of heat transfer mechanism involved (conduction, convection, or radiation). Heat transfer rate is often expressed in units of watts or BTUs per unit of time (e.g., watts/second or BTUs/hour).
Here in the Question,
The shape of the line graph that shows the temperature change over time of the liquid before it starts to boil is generally an upward-sloping line. As heat is applied to the liquid, its temperature will increase gradually until it reaches its boiling point. The rate of temperature increase may not be constant, and there may be some fluctuations due to factors such as changes in the rate of heat transfer.
Therefore, the trend of the line graph will be upward-sloping until the liquid reaches its boiling point.
To learn more about the boiling point of water click:
https://brainly.com/question/30462611
#SPJ2
A body makes a displacement of 4 m due East from a point O and then makes displacement of 3 m due North. Its resultant displacement from O
Answer:
Answer5 mExplanation:when u draw this on paper u will find that it is forming a right angle
triangle. therefore, using Pythagoras
theoremdisplacement
please help urgent have you ever seen the old “Pull the tablecloth out from under the dishes” trick? Use Newton’s 1st Law to explain the following:
a. In this trick, are the dishes “objects in motion,” or “objects at rest?”
b. If the dishes end up staying on the table, was an UNBALANCED FORCE applied to them? How do you know?
Answer:
I kinda dont remember the 1st law so search it up on
and it should tell u , but if u need any help from the
A piece of gum becomes stuck upon a skateboard's wheel. What is the centripetal acceleration of the piece of gum if the wheel's radius is 30 mm and the tangential velocity is 0.5 m/s?
Answers:
a. 8.33 m/s^2
b. 0.5 m/s^2
c. 30 mm/s^2
d. 0.33 m/s^2
e. 83.20 m/ft^2
Answer:
a
Explanation:
a_c = v_t^2/r
a_c = (0.5)^2/0.03
a_c = 8.33 m/s^2
Question 10 of 10
A television weighs 8.50 pounds. How many grams is this? (Hint: You need to
use two unit conversion fractions. 1 pound equals about 0.454 kg.)
A. 3860 g
B. 18.7 g
C. 18,700 g
D. 3.86 g
SUBWT
C. 18,700g
Explanation:
8.50+1
then -0.454
The television weighs 8.50 pounds which is equal to 3860 grams. Hence, option (A) is correct.
What is mass?In physics, mass is a numerical representation of inertia, a fundamental characteristic of all matter. It essentially refers to a body of matter's resistance to changing its speed or location in response to the application of a force.
The change caused by an applied force is smaller the more mass a body has. The kilograms serves as the unit of mass in the International System of Units (SI).
Given that: A television weighs 8.50 pounds.
And 1 pound equals about 0.454 kg.
Hence, the television weighs = 8.50 pounds × (0.454 kg/1 pound).
= 3.859 kg.
Hence, the television weighs = 3.859 kg × (1000 g/1kg).
= 3859 grams
= 3860 grams ( approx.)
Hence, the television weighs 3860 grams.
Learn more about mass here:
https://brainly.com/question/19694949
#SPJ5
What type of wave is shown below?
A. Rarefaction
B. Transverse
C. Longitudinal
D. Compressional
Answer:
B. Transverse wave.
Explanation:
Because it has troughs and crests.
A liquid of density 1200kg/m³ is filled in a beaker upto the depth of 50 cm. calculate the pressure at bottom of the breaker.(g=9.8m/s²)
[tex]\boxed{\sf Pressure=pgh}[/tex]
[tex]\\ \qquad\quad\sf{:}\dashrightarrow Pressure=1200(0.5)(9.8)[/tex]
[tex]\\ \qquad\quad\sf{:}\dashrightarrow Pressure=600(9.8)[/tex]
[tex]\\ \qquad\quad\sf{:}\dashrightarrow Pressure=5880Pa[/tex]
