Answer:
The lighting filters use subtractive properties to bring light of a color to the eye because subtractive color mixing uses white light source with a series of filter to eliminate certain wavelengths of light.
Different colour lights (RBG) uses additive properties to bring light of a certain color to our eyes.
What is color synthesis?Color synthesis is the art of forming different types of colours from small number of primary colours. The color formed is called a secondary color.
Color synthesis is carried out through the following means:
Additive color synthesis andSubtractive color synthesis.In additive color synthesis, the three primary colours lights that are combined is Red(R), Blue (B) and Green(G).
The wavelength from the various color light combine to generate white light which is visible to the eye.
Therefore, different colour lights (Red, Blue and Green) uses additive properties to bring light of a certain color(white) to our eyes.
Learn more about color synthesis here:
https://brainly.com/question/18452279
A cactus needle is a structure made of different tissues that work together to protect the plant from animals that might want to eat it. What level of body organization does a cactus needle represent?
A. Cell
B. Organ
C. Cell system
D. Body system SUBMIT
calculate the volume of the object immersed in the water in the water in the adjoining figur.
Answer:
100 cm³
Explanation:
Hi there!
Subtract:
400 cm³ - 300 cm³
= 100 cm³
Therefore, the volume of the object is 100 cm³.
I hope this helps!
Can compound take part in chemical reaction?
Answer:
YES!
Explanation:
Which statement is true about percent yield
A cylinder container with a diameter of 23.0 cm and a height of 140 cm contains N2O at a pressure of 108 kpa and temperature of 294 K. How many grams of N2O gas are in the cylinder?
Answer:
113.17 g
Explanation:
This can be solved using the Ideal Gas Equation:
PV=nRT
First step is to calculate the volume of the cylinder in L:
V=πr²h
V= π (11.5)² (140)
V= π (132.25) (140)
V = π (18.515)
V = 58,166.588 cm³ = 58.2 L
Then, convert kpa into atm:
1 kpa = 0.00987 atm
108 kpa = 1.06588 atm
Then, plug all of your values into the Ideal Gas Equation to solve for moles:
(1.06588)(58.2)=n(0.082057)(294)
62.034=n(24.125)
2.571357513=n
Finally, convert the moles into grams
2N = 28.0134 amu
O = 15.999 amu
_______________
44.0124 amu
(2.571357513moles)(44.0124 amu) = 113.17 g
Magnesium and Hydrochloric acid (HCl) react to form magnesium chloride (MgCl2) and hydrogen gas. If you started with 65.8 g of magnesium and 45.7 g of hydrochloric acid. What is the limiting reactant? Ensure you post calculations to prove your answer. (3 marks)
Answer:
Cl
Explanation:
n for Mg=m:Mm
=65.8:24
=2.74mol
n for Cl=m:Mm
=45.7:70
=0.65mol
According to the number of moles we can say that the limiting reagent is Cl as it has few moles.
Limiting agents are the reactant that determines the amount of the product in a reaction. In the reaction between magnesium and hydrochloric acid, the limiting reagent is HCl.
What is a limiting reagent?A limiting reagent is a substance that restricts or determines the amount of product formation in a reaction. They are the reactants with less number of moles and get consumed in the reaction before the other reactant.
The reaction between magnesium and hydrochloric acid is given by,
Mg(s) + 2HCl(aq) → MgCl₂(aq) + H2(g)
Here, 1 mole of Mg and 2 moles of HCl are required to produce 1 mole of magnesium chloride.
The moles of Mg,
= 65.8 g ÷ 24.305
= 2.707 mol
And, moles of HCl
= 45.7 g ÷ 36.458
= 1.253 mol
The stoichiometric ratio Mg : HCl = 1:2
Hence, Mg = 2.707 ÷ 1 = 2.707 and HCl = 1.253 ÷ 2 = 0.6265
Therefore, HCl is the limiting reagent.
Learn more about limiting reagents here:
https://brainly.com/question/19654705
#SPJ5
A 240g hydrated sodium sulphide contains 162g of water of crystallisation. What is the correct molecular formula for this compound?
What is the answer and working
Answer:
Explanation:
First of all, 1 mol of Sodium Sulphide has molecular mass of
S = 32
Na2 = 2*23 = 46
The formula of NaS is actually Na2S. It's molecular mass = 78
How many grams of Na2S are present
Grams present = 240 - 162 = 78 which is exactly 1 mol.
The remainder is water.
The molecular mass of water = 2 + 16 = 18
162 grams of water = 162/18 = 9 mols of water.
So the correct formula is Na2S*9H20
Precipitate WILL form if Silver Nitrate reacts with Iron (III) chloride
-true or false
Answer:
yes
Explanation:
3Ag(No3) (aq) +FeCl3(aq) -->Fe(NO3)3(aq)+3AgCl(s)
10. As electrons move through the electron-transport chain,
they lose energy, which is used to form
O A. NAD.
O B. ADP
O C. ATP.
O D. GBP
Answer:
C. ATP.
Explanation:
During the process of aerobic cellular respiration, energy is said to be released in three main stages: glycolysis, Krebs cycle and oxidative phosphorylation (electron transport chain). The electron transport chain produces the most energy and it involves the transfer of electrons through series of complex proteins.
As the electrons move through the individual complexes, energy is lost to form a proton gradient (H+). The proton gradient powers the synthesis of ATP from ADP as catalyzed by ATP synthase.
Why are the highest oxidation state of the transition metal stabilised in the oxide and fluoride compond?
Answer:
Following are the solution to the given question:
Explanation:
Its maximum oxidation zone is exceptionally stable and has the greatest ability to charge density, while fluoride and oxide ions are the largest particles with the largest durability of charge.
Or it might be assumed as oxygen and fluorine are the system particle atoms that have the highest electron number of metals.
which energy is found in the nucleus of an atom?
Answer:
Nuclear energy.
Explanation:
It's the energy that holds protons and neutrons ( nucleons ) together, hence holds the nucleus as one.
In Rutherford experiment some alpha particles fired at a gold foil bounced backward as a result of ... A.reflection from the surfaces of gold atoms B.electrostatic repulsion by gold nuclei C.electrostatic repulsion by electronsD.all of the aboveE.none of the above
Answer:
B.electrostatic repulsion by gold nuclei
Explanation:
According to Rutherford's experiment, a thin gold foil was bombarded with alpha particles. Some of the particles passed through the foil undeviated, some were scattered through large angles while some bounced backwards.
It follows that the particles that bounced backwards must have encountered a massive particle of like charge.
The atom is composed of a nucleus which contains positively charged particles. Some of the alpha particles which are positively charged particles bounced back when they encountered the positively charged particles in the nucleus.
Answer: The correct option is B (electrostatic repulsion by gold nuclei).
Explanation:
In the Rutherford's experiment, he used positively charged particles called alpha particles to bombard an atom in order to find out what is inside the atom. Together with two other scientists, Geiger and Marsden, they used a narrow beam of alpha particles emitted from a radioactive source to bombard a thin gold foil. The scattering of the particles from the gold foil was detected by a movable zinc sulphide screen which could be rotated to various positions around the foil.
Each time an alpha particle hit the screen, a visible flash of light or scintillation was produced. This was observed by a microscope attached to the screen. It was then observed that some of the particles followed a straight path through the gold foil while a few where scattered in a backward direction. This was as a result of electrostatic repulsion by gold nuclei which occurs due to the greater part of the mass of the atom was concentrated in a minute nucleus with positive charge.
Câu 9: 100 g dung dịch MgCl2 9.5 % tác dụng đủ với dung dịch KOH 5,6 % .được dung dịch A và chất rắn B. Lọc rắn B và nung đến khối lượng không đổi được chất C.
a) Viết pt .Tính khối lượng răn C
b) Tính nồng độ phân trăm của dung dịch A.
hiiiiiiiii
hiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
How can you calculate the instantaneous rate of a reaction from a graph of concentrations over time?
how is soda made?
this includes sprite, coca cola, dr pepper, exd.
Answer:
Soda all start with watered down corn syrup. To get the carbonation companies have different ways of doing this all of which are very different. The last step is to add artificial and natural flavors like lemon and lime, this is also the step in which sugar and preservatives are added.
Explanation:
I hope this answer your question, srry I couldn't go into detail.
relate the pH of a solution to its hydronium and hydroxyl ion concentration and its acidity or basicity
brain list if your answer is good
when ph decrease that means acidity increase
when ph increase that means basicity increase
What is valence of helium
An atom with 6 protons and 8 neutrons is an)
Answer: carbon (C)
Explanation:
is (H) a positive or negative value
Answer:
A chemical reaction that has a positive ΔH is said to be endothermic , while a chemical reaction that has a negative ΔH is said to be exothermic . What does it mean if the ΔH of a process is positive? It means that the system in which the chemical reaction is occurring is gaining energy.
What amount of SeC16 is needed to produce 4.45 mol of chlorine gas in the
reaction Seclo +0 218) —SeO, +3Cl2te)?
2.85 mol
0.95 mol
5.70 mol
8.55 mol
1.49 mol
Answer:
1.48 moles of SeCl6 are needed
Explanation:
Based on the reaction:
SeCl6 + O2 → SeO2 + 3Cl2
1 mole of SeCl6 reacts producing 3 moles of Cl2.
To solve this question we need to use the conversion factor:
1mol SeCl6 = 3mol Cl2
As we want to produce 4.45 moles of Cl2, we need:
4.45 mol Cl2 * (1mol SeCl6 / 3mol Cl2) =
1.48 moles of SeCl6 are neededplease answer fast............
It's O2 which is oxygen....
Answer:
c. CO2 is the answer.Explanation:
Hope this helps you. Please mark as brainliest. Good Luck^_^
Chất tinh khiết là:
A. Có tính chất thay đổi
B. Có lẫn thêm vài chất khác
C. Gồm những phân tử đồng dạng
D. Không lẫn tạp chất
Answer:
The FitnessGram™ Pacer Test is a multistage aerobic capacity test that progressively gets more difficult as it continues. The 20 meter pacer test will begin in 30 seconds. Line up at the start. The running speed starts slowly, but gets faster each minute after you hear this signal. [beep] A single lap should be completed each time you hear this sound. [ding] Remember to run in a straight line, and run as long as possible. The second time you fail to complete a lap before the sound, your test is over.
fd
What is the meaning of salt
Answer:
a white crystalline substance that gives seawater it characteristics of taste
A bedroom that measures 11 ft by 12 ft by 8.0 ft contains 35.41 kg of air at 25 C. What is the pressure of the air in the room? You may assume that the molar mass of air is 29.0 g/mole.
Answer:
9.97×10⁻⁴ atm
Explanation:
Applying,
PV = nRT............... Equation 1
Where P = pressure, V = volume, n = number of moles of air, R = molar gas constant, T = Temperature.
make P the subject of the equation
P = nRT/V............ Equation 2
From the question,
Given: V = (11×12×8) ft³ = 1056 ft³ = (1056×28.3168) = 29902.5 L, T = 25°C = (25+273) = 298 K, n = 35.41/29 = 1.22 mole
Constant: R = 0.082 atm.L/K.mol
Substitute these values into equation 2
P = 1.22×0.082×298/29902.5
P = 9.97×10⁻⁴ atm
ASAP
What happens to a glass of pure fruit juice when water is added to it?
A - The number of moles of fruit juice increases.
B - The number of moles of fruit juice decreases.
C - The molarity of the juice increases.
D - The molarity of the juice decreases.
D. The MOLARITY of the juice DECREASES when water is added to it.
MOLARITY refers to the amount of a substance (solute) in a certain volume of solution. It is a measure of the CONCENTRATION OF A SOLUTION. In chemistry, molarity is calculated by dividing the number of moles of a solute by the volume of the solvent i.e.
MOLARITY (mol/L or M) = number of moles (n)/volume of solvent (V)
* The above equation means that the molarity of a solution is inversely proportional to its volume i.e. as molarity increases, volume decreases and vice versa.
According to this question, water is added to a glass of pure fruit juice (dilution). This means that the volume of the juice will increase. As the volume increases via addition of water, the MOLARITY DECREASES.
Learn more: https://brainly.com/question/20899596
En una carrera de atletismo un deportista se muestra agotado sin fuerzas para continuar y decide abandonar la carrera ¿Que alimentos tomo antes de la carrera ?
Answer:
Los alimentos para evitar la fatiga durante una carrera son alimentos bajos en grasas y altos en carbohidratos, así como alimentos bajos en fibra como pan, mantequilla de maní, plátano, jugo de frutas sin pulpa, y beber hasta aproximadamente 600 ml de líquido aproximadamente 3 horas. antes de la carrera
La comida para comer unos días antes de la carrera incluye carnes magras, arroz, pasta y verduras con contenido de almidón.
Los alimentos que se deben evitar incluyen carne roja, alimentos con alto contenido de grasas saturadas, alimentos fritos, pasteles y salchichas.
Explanation:
the solubility of sugar is 250 at 60° what does it mean. please helpp anyone please help
I don't know I am having the same problem
Trong các yếu tố sau đây: nồng độ, nhiệt độ, áp suất, diện tích tiếp xúc, chất xúc tác, có bao nhiêu yếu tố có thể ảnh hưởng tới tốc độ phản ứng?
Answer:
solubility of salt at 10 degree Celsius is 20 how does it what does it means what happens if the temperature of saturated solution is increased
Explanation:
solubility of salt at 10 degree Celsius is 20 how does it what does it means what happens if the temperature of saturated solution is increased
What will happen if we drink liquid nitrogen?
Describe the principle and process for the manufractured of sulphuric acid witha a well labeled diagram by contact process.
The steps involved in the manufacture of sulphuric acid by contact process:
(1) Sulphur (or iron pyrites) are burnt in air to form sulphur dioxide.
S+O2→SO24FeS2+11O2→2Fe2O3+8SO2
(2) Catalytic oxidation of sulphur dioxide to sulphur trioxide.
2SO2+O2V2O52SO3ΔrHo=−196.6kJ
The reaction is reversible and exothermic.
(3) Sulphur trioxide is dissolved in 98% sulphuric acid to form oleum (fuming sulphuric acid).
SO3+H2SO4→H2S2O7
(4) Oleum is diluted with water to form sulphuric acid of desired concentration.
H2S2O7+H2O→2H2SO4
and
Manufacture of H2SO4 by contact process involves three steps:
1. Burning of sulphur in air to generate SO2.
2. Conversion of SO2 to SO3 by oxidation with air in the presence of
