Answer:
It is the inability of the body to change by itself its state of rest or uniform motion or direction. Types of Inertia- It is of three types-(1)Inertia of rest (2) Inertia of motion(3) Inertia of direction. (1) Inertia of rest - It is the inability of the body to change by itself its state if rest.
Which choice shows the correct sequence of features formed by continued wave erosion?
Answer:
Wave-cut cliff, sea arch, sea stacks
Explanation:
The effect of a wave erosion is made obvious by the structures formed by the wave action.
The high areas of land adjacent to the incoming wave develop the early features or the formation of wave action, which includes the wave-cut cliff
The continuous undercutting of the cliff by the wave results in the formation of the wave cut platform
The effect of the wave further on a cliff, results in the formation of a sea arch and finally a sea stack
Therefore, the correct sequence is the wave-cut cliff, sea arch, sea stacks
: 1 khối khi lý tưởng nhận được nhiệt lượng 200J, khi đó khí nở ra đẩy pittong bằng 1 công 80J.
Vậy nội năng Của khí là bao nhiêu
Answer:
DU = 120 Joules
Explanation:
Given the following data;
Quantity of energy = 200 J
Work = 80 J
To find the change in internal energy;
Mathematically, the change in internal energy of a system is given by the formula;
DU = Q - W
Where;
DU is the change in internal energy.
Q is the quantity of energy.
W is the work done.
Substituting into the formula, we have;
DU = 200 - 80
DU = 120 Joules
what weight is recorded by a scale when it is placed inside a lift which is in free fall? Enplain.
Answer:
Explanation:
There is no pressure of your feet on the scales, and no pressure of the floor on the scales, so the scales will read zero*. Hence, your weight, in a freely falling lift is zero
a ball was changed vertically upwards with kinetic energy 200 joule what will be the total energy and Midway
Answer:
Part 1; The total energy = Constant = 200 J
Part 2; Midway, the potential energy = The kinetic energy = 100 J
Explanation:
Part 1
According to the first law of thermodynamics, energy is neither created nor destroyed but changed from one form to another
The total (mechanical) energy = Potential energy + Kinetic energy = Constant
The kinetic energy given to the ball changed vertically up = 200 J
Potential energy = Mass, m × Gravity, g × Height, h
Given that the mass m of the ball and the acceleration due to gravity, g, remain the same, we have;
Potential energy ∝ The height of the ball
The potential energy at ground level = 0 J (Height , h = 0)
∴ The total (mechanical) energy = 0 J + 200 J = 200 J
At the maximum height, the ball momentarily stops, and the kinetic energy = 0 J
Therefore;
The potential energy of the ball at the maximum height, [tex]h_{max}[/tex], [tex]P.E._{max}[/tex] = 200 J
∴ [tex]P.E._{max}[/tex] = m·g·[tex]h_{max}[/tex] = 200 J
Part 2
At midway we have, the height, h = ([tex]h_{max}[/tex])/2
Therefore, [tex]P.E._{Midway}[/tex] = (m·g·([tex]h_{max}[/tex]))/2 = ([tex]P.E._{max}[/tex])/2 = (200 J)/2 = 100 J
The potential energy midway = 100 J
The remaining 200 J - 100 J = 100 J is the kinetic energy remaining in the ball
The kinetic energy midway = 100 J
Therefore, the total energy midway = 100 J + 100 J = 200 J
Why does a small piece of steel rod sinks while a large steel oil tanker floats?
Plss help thanks! pls include EXPLANATION and EXAMPLES that I can proof to people that has no knowledge
Answer:
Too what i know its because of the air
Explanation:
The steel rod is more dense and doesnt have air whil'st the oil tanker is less dense with lots of air
if a person buys 10 kg apples in himalayan region and sells in terai region will he get profit or loss. why?
Answer:
he will be in profit
Explanation:
Himalayan region are high above the sea level so the gravity will be less there compared to the Terai region
Terai lies way below he Himalayan region so the pull of gravity will be more compared to Himalayan region
that's why he will be in profit but not loss
calculate the potential energy stored in a meta ball of mass of 80 kg kept at a height of 15m from the earth surface . What will be the potential energy when the metal ball is kept on the earth surface Take (g- 9.8 m/s]
Answer:
11760 J
Explanation:
cuz potential engery is PE = MHG
SO 80×15×9.8= 11760 J
Answer:
11769j
Explanation:
here,
mass(m)=80 kg
height(h)=15m
acceleration due to gravity(g)=9.8m/s^2
now,
potential energy = m×g×h
= 80×9.8×15
= 11760j
A sound frequency 100Hz and wavelength 3.34m is travelling through air, calculate the Velocity of sound in air.
Answer:
334m/s
Explanation:
If you take the data you gave and insert it into the equation f=v/λ the frequency would come out to be 3.34m
334 m/s is the Velocity of sound in air.
What is the velocity of a wave?Wave velocity in common usage refers to speed, although, properly, velocity implies both speed and direction.
The velocity of a wave is equal to the product of its wavelength and frequency (number of vibrations per second) and is independent of its intensity.
Mathematically , v=fλ
According to the question,
Sound frequency (f) = 100Hz
Wavelength (λ)= 3.34m
Computing the values in the formula,
v=fλ
v = 100Hz x 3.34m
v= 334m/s
Therefore,
Velocity of sound in air is 334 m/s.
Learn more about velocity of a wave here:
https://brainly.com/question/1292129
#SPJ2
The mass of earth 6*10^24kg its radius is 6.4*10^3km now calculate due to gravity on earth
Answer:
Explanation:
in your textbook, they have a formula like this:
g=mass of earth*G/R^2
G=6.67*10^-11
apply to this
we have g=6*10^2*4*6.67*10^-11/(6.4*10^3*1000)^2=9.78
write any two uses of a wedge.
Answer: two uses of a wedge can be to tighten things as well as to lift things.
Explanation: because that is some things wedges (a mechanical tool) can do.
Tính công của dòng điện
Answer:
CG gh sure er go b vh pxuh FPI OO c AM h kh
If a fan draws 220 watts on a 120- volt circuit what is the current being drawn?
22. amperes
O 5.2 amperes
O 1.8 ampmes
15. amperes
Explanation:
here's the answer to your question
Wat is acceleration!!!!!
Answer:
Acceleration is the rate of change of velocity with time.its system international unit is meters per second square.
I hope this helps
1. Find the temperature when the degrees of the Celsius scale will be one fifth of the corresponding degrees of the Fahrenheit scale
2. How much heat is necessary to warm 500g of water from 20°C to 65°C?
Answer:
F = 9/5 C + 32 conversion from C to F
F = 9/5 * F/5 + 32
25 F = 9 F + 800
16 F = 800
F = 50
Check:
C = 5/9 ( F - 32) = 5/9 (50 - 32) = 10 as requested
Q = c m change in temp
Q = 1 cal/gm-deg C * 500 gm * 45 deg C = 22,500 calories
50 Fahrenheit heat required.
How much heat required?Heat transfer is a discipline of thermal engineering that concerns the generation, use, conversion, and exchange of thermal energy between physical systems.
F = 9/5 C + 32 conversion from C to F
F = 9/5 * F/5 + 32
25 F = 9 F + 800
16 F = 800
F = 50
The answer is 50 Fahrenheit.
Learn more about heat transfer
https://brainly.com/question15086449
#SPJ2
An astronaut on Pluto attaches a small brass ball to a 1.00-m length of string and makes a simple pendulum. She times 10 complete swings in a time of 257 seconds. From this measurement she calculates the acceleration due to gravity on Pluto. What is her result
Answer:
The acceleration due to gravity at Pluto is 0.0597 m/s^2.
Explanation:
Length, L = 1 m
10 oscillations in 257 seconds
Time period, T = 257/10 = 25.7 s
Let the acceleration due to gravity is g.
Use the formula of time period of simple pendulum
[tex]T = 2\pi\sqrt{\frac{L}{g}}\\\\25.7 = 2 \times 31.4\sqrt{\frac{1}{g}}\\\\g = 0.0597 m/s^2[/tex]
Can someone help me please this test is very important
Answer:
Friction is caused in roller coasters by the rubbing of the car wheels on the track and by the rubbing of air (and sometimes water!) against the cars.
Explanation:
The radius of the base of a wooden cylinder 2m and its altitude is 7m. What is its mass?
Answer:
88 m ^2
Explanation:
Which law states that absolute zero cannot be reached?
Question in the picture please help me...
Show all steps please....
Answer: i)A to B : (ice) freezing
ii) B to C (water) boiling
C to D (steam) evaporating
explanation: 0° is the freezing point of water when temperature increases from 0° the water starts melting. As 100° is the boiling point of water so at 100° the water completely melts and it starts boiling during boiling water changes into steam(water vapour) and it evaporates
how does the siphon work
Answer:
A simple siphon raises water over a crest and discharges it at a lower level.It works coninueasly due to pull of gravity.
Explanation:
Siphons are tubes which draw fluid over the rim of a tank to a lower point. After an initial pressure change to initiate the flow, siphons operate continuously due to the pull of gravity.
Working:
A simple siphon raises water over a crest and discharges it at a lower level. As water flows through a siphon, energy due to pressure and elevation is either lost to pipe friction or converted to velocity energy.
The heat required to raise 3 kg of copper from 0°C to 10°C raises 1kg of lead from 10°C to 100°C. If the specific heat capacity of copper is 0.095 cal/g°C,find the specific heat capacity of lead.
The specific heat capacity of lead has been determined to be 0.032 cal/g°C.
The specific heat capacity of a substance is the amount of heat required to increase the temperature of its unit mass by 1 Kelvin rise in temperature. There is no phase change during the process. This can be expressed as:
Q = mcT
c = [tex]\frac{Q}{mT}[/tex]
Where c is the specific heat capacity of the substance, Q is the quantity of heat required, m is the mass of the substance and T is its change in temperature.
In the given question, the heat emitted by the copper mass would be absorbed by the lead mass.
So that;
heat emitted by copper = heat absorbed by lead
[tex]m_{c}[/tex] [tex]c_{c}[/tex]([tex]T_{2}[/tex] - [tex]T_{1}[/tex]) = [tex]m_{l}[/tex][tex]c_{l}[/tex]([tex]T_{2}[/tex] - [tex]T_{1}[/tex])
With the given information in the question, the above equation is expressed as:
3 * 0.095 * (10 - 0) = 1 * [tex]c_{l}[/tex]* (100 - 10)
3*0.095*10 = [tex]c_{l}[/tex] * 90
2.85 = [tex]c_{l}[/tex]*90
[tex]c_{l}[/tex] = [tex]\frac{2.85}{90}[/tex]
= 0.031667
[tex]c_{l}[/tex] = 0.032 cal/g°C
Therefore, the specific heat capacity of lead is 0.032 cal/g°C.
For more clarifications, visit: https://brainly.com/question/22991121
En un rio una Onda viaja con una velocidad de propagación de 50 m/s con una longitud de Onda de 40 metros. Hallar la frecuencia de la Onda.
Answer:
Frequencia = 1.25 Hz
Explanation:
Dados los siguientes datos;
Velocidad = 50 m/s Longitud de onda = 40 metrosPara encontrar la frecuencia de la onda;
Matemáticamente, la velocidad de una onda viene dada por la fórmula;
[tex] Velocidad = Longitud \; de \; onda * Frequencia [/tex]
Haciendo de la frecuencia el tema de la fórmula, tenemos;
[tex] Frequencia = \frac {Velocidad}{Longitud \; de \; onda} [/tex]
Sustituyendo en la fórmula, tenemos;
[tex] Frequencia = \frac {50}{40} [/tex]
Frequencia = 1.25 Hz
an electron is moving at 3.6 x 10^3 m/s. a photon with what wavelength would have the same momentum????
Answer:
The wavelength of the photon that would have the same momentum as the electron is 202.2180996 nm
Explanation:
The velocity of the electron, v = 3.6 × 10³ m/s
The momentum of an electron, [tex]p_e[/tex] = m × v
Where;
v = The mass of the electron = 9.109 × 10⁻³¹ kg
∴ [tex]p_e[/tex] = 9.109 × 10⁻³¹ kg × 3.6 × 10³ m/s = 3.27924 × 10⁻²⁷ kg·m/s
According to the de Broglie equation, the momentum of a photon, p, is given as follows;
p = h/λ
Where;
h = 6.63 × 10⁻³⁴ J·s
λ = The wavelength of the photon
∴ λ = h/p
According to the question, we have;
p = [tex]p_e[/tex] = 3.27924 × 10⁻²⁷ kg·m/s
∴ λ = 6.63 × 10⁻³⁴ J·s/(3.27924 × 10⁻²⁷ kg·m/s) = 2.02180993 × 10⁻⁷ m
The wavelength of the photon, λ = 2.02180993 × 10⁻⁷ m = 202.2180993 × 10⁻⁹ m = 202.2180993 nm.
The speed of sound where a tuning fork of frequency 262 Hz produces the third resonance position above a closed air column that is 1.59 m in length is ___m/s.
Answer:
v = 333.26 m/s
Explanation:
Given that,
The frequency of the tuning fork, f = 262 Hz
It produces the third resonance position above a closed air column that is 1.59 m in length.
We need to find the speed of sound in tuning fork. Let it is f. The third resonance position corresponds to the fifth harmonic of the closed air column. The wavelength in third resonance is given by :
[tex]\lambda=\dfrac{4}{5}L\\\\=\dfrac{4}{5}\times 1.59\\\\=1.272\ m[/tex]
The speed of sound is :
[tex]v=f\lambda\\\\=262\times 1.272\\\\=333.26\ m/s[/tex]
So, the speed of sound is 333.26 m/s.
Answer:
The speed of sound is 555.44 m/s.
Explanation:
frequency of third resonance position, f''' = 262 Hz
length of pipe, L = 1.59 m (closed)
Let the speed is v.
The frequency of third resonance in closed organ pipe is
[tex]f''' =\frac{3 v}{4 L}\\\\262 = \frac{3 v}{4\times 1.59}\\\\v = 555.44 m/s[/tex]
Describe in brief
brief the scope and excitement
in Physics
Answer:
The scope of physics is quite vast and covers an enormous range of magnitude of physical quantities like mass, length, time, energy etc.
The scope is divided into two sections, where on one side it studies about phenomena at a very small microscopic level involving and analyzing electrons, protons, and neutrons.
A body starts with an initial velocity of 15m/s and accelerates 4m/s2. Find the distance covered by 5s
Answer:
Distance, S = 110 meters
Explanation:
Given the following data;
Initial velocity = 15 m/s
Acceleration = 4 m/s²
Time = 5 seconds
To find the distance covered, we would use the second equation of motion;
[tex] S = ut + \frac{1}{2} at^{2} [/tex]
Where;
S is the distance covered or displacement of an object.
u is the initial velocity.
a is the acceleration.
t is the time.
Substituting the values into the equation, we have;
[tex] S = 15*4 + \frac{1}{2} * 4*5^{2} [/tex]
[tex] S = 60 + 2*25 [/tex]
[tex] S = 60 + 50 [/tex]
Distance, S = 110 meters
What is the apparent deflection of a light beam in an elevator which is 2.7 m wide if the elevator is accelerating downward at 9.8 m/s^2?
Answer:
[tex]X=3.37561*10^{-16}[/tex]
Explanation:
From the question we are told that:
Width [tex]w=2.7m[/tex]
Acceleration [tex]a=9.8m/s^2[/tex]
Generally the equation for The apparent deflection is mathematically given by
X= 0.5 *g*t^2
Where
[tex]t=\frac{width}{Velocity of light}[/tex]
[tex]t=\frac{2.5}{3*10^8}[/tex]
[tex]t=8.3*10^{-9}[/tex]
Therefore
[tex]X= 0.5 *9.8*(8.3*10^{-9})^2[/tex]
[tex]X=3.37561*10^{-16}[/tex]
Two rams run toward each other. One ram has a mass of 44 kg and runs south with a speed of 6 m/s, while the other has a mass of 50 kg and runs north with a speed of 3 m/s. What will the momentum of the system made up of the two rams be after they collide? Assume the total momentum of the system is conserved.
A. 114 kg-m/s south
B. 414 kg-m/s south
C. 414 kg m/s north
D. 114 kg-m/s north
help me guys, i am illiterate
if the mass of the moon 7.2*10^22 kg and and the radius is 1.7*10^6m , what will be the acceleration due to gravity of the moon ? what will be the weight of a person of 60 kg mass on the surface of moon ?
Answer:
A. 1.66 N/Kg or m/s²
B. 99.6 N
Explanation:
A. Determination of the acceleration due to gravity of the moon.
Mass of the moon (Mₘ) = 7.2×10²² Kg
Radius of the moon (rₘ) = 1.7×10⁶ m
Gravitational constant (G) = 6.67×10¯¹¹ Nm²/Kg²
Acceleration due to gravity of the moon (gₘ)
gₘ = GMₘ / rₘ²
gₘ = (6.67×10¯¹¹ × 7.2×10²²) / (1.7×10⁶)²
gₘ = 1.66 N/Kg
Acceleration due to gravity on the moon is 1.66 N/Kg or m/s²
B. Determination of the weight of a 60 kg person on the moon.
Acceleration due to gravity of the moon (gₘ) = 1.66 N/Kg
Mass of person (m) = 60 Kg
Weight on the moon (Wₘ) =?
Wₘ = m × gₘ
Wₘ = 60 × 1.66
Wₘ = 99.6 N
Thus, the weight of a 60 kg person on the moon is 99.6 N
Two charges 3*10^-5 C and 5*10^4 C are placed at a distance 10 cm form each other. Find the value of electrostatic force acting between them. a) 13.5 x 10^11N b) 40 x 10^11N c)180 x 10^9N d)13.5 x 10^10 N
Answer:
13.5 x 10^(11) N
Explanation:
Given :
The magnitude of charge 1 = q1 = 3 × 10^(-5) C
The magnitude of charge 2 = q2 = 5 × 10^(4) C
The distance between charges = d = 10 cm = 0.1 m
To Find :
The magnitude of electrostatic force acting between charges
Solution :
∵ Electrostatic force = F = (k × (q1) x (q2)) / r^(2)
where k = 9 × 10^(9)
i.e F = 9 × 10^(9) × (3 × 10^(-5) × 5 × 10^(4)) / (0.1)^(2)
Or, F = 9 × 10^(9) × (1.5/0.01)
∴ F = 9 × 10^(9) × 150
i.e F = 1350 × 10^(9)
or, Force = F = 1.35 × 10^(12) N
Hence, The magnitude of electrostatic force acting between charges is 1.35 × 10^(12) N => 13.5 x 10^(11)
