Answer:
im just a child
Explanation:
what is the balanced equation of 2HCl + Mg - MgCla + Ha
2HCl + Mg => MgCl2 + H2
Write down the constituent elements present in the following compounds.
a. Sodium Sulphate
b. Baking Soda
c. Limestone
d. Bleaching powder
e. Ammonia
f. Caustic Soda
g. Glucose
h. Ammonium Carbonate
I. Acetic acid
j. sulphuric acid
Answer:
in sodium sulphate there is sodium an sulphur
100cm³ of ethane gas diffuses through a porous plug in 100 seconds.What is the molecular mass of the gas Q if 100cm³ of the gas diffuses through the same plug in 121 secknds under the same condition?(C=12.0,H=1.0)
Answer:
The molar mass of gas Q is 43.923 g/mol
Explanation:
The given volume of ethane gas that diffuses through a porous plug in 100 seconds = 100 cm³
Therefore;
The rate of diffusion of ethane gas through the porous plug, [tex]v_{ethane}[/tex], is given as follows;
[tex]v_{ethane}[/tex] = (100 cm³/100 s) = 1 cm³/s
The molar mass of ethane, C₂H₆ = 2×12 g/mol + 6×1 g/mol = 30 g/mol
The given volume of gas, Q, that diffuses through a porous plug in 121 seconds = 100 cm³
∴ The rate of diffusion of the gas, Q, [tex]v_Q[/tex] = 100/121 cm³/s
Graham's Law of diffusion states that the rate of diffusion of a gas is inversely proportional to the square root of the molecular mass of the gas
Mathematically, we have;
[tex]\dfrac{v_A}{v_B} =\sqrt{\dfrac{m_B}{m_A} }[/tex]
Where;
[tex]v_A[/tex] = The rate of diffusion of gas A
[tex]v_B[/tex] = The rate of diffusion of gas B
[tex]m_A[/tex] = The molar mass of the gas A
[tex]m_B[/tex] = The molar mass of the gas B
Therefore, for ethane and gas Q, measured under the same condition, we have;
[tex]\dfrac{v_{ethane}}{v_Q} =\sqrt{\dfrac{m_Q}{m_{ethane}} }[/tex]
[tex]\dfrac{1 \ cm^3/s}{\dfrac{100}{121} \ cm^3/s} =\sqrt{\dfrac{m_Q}{30 \ g/mol} }[/tex]
[tex]m_Q = \left ({\dfrac{121}{100} } \right) ^2 \times 30 \ g/mol = 43.923 \ g/mol[/tex]
The molar mass of gas Q, [tex]m_Q[/tex] = 43.923 g/mol.
describe two ways in which gases are similar to liquids in properties
Answer:
they have weak intermolecular forces
as the balloon rises what happens to the external pressure
Answer:
As the ballon rises higher the atmospheric pressure will drop if the ballon is made of an elastic material,it will stretch to allow the gas inside it to expand
convert the following into Kelvin scale 253°c
Explanation:
253°C + 273.15 = 526.15K
526.15 kelvins
There is 25.3 mL of the sulfuric acid solution; the sulfuric acid concentration is 2.30 M. Your base solution is 1.00 M. What is the volume in mL of base that is required to complete the neutralization of the acid
Answer:
The volume of the base is 0.05819·x L, where x is the number of moles of base that combines with one mole of sulfuric acid
Explanation:
The volume of the sulfuric acid, V = 25.3 mL = 25.3 × 10⁻³ L
The concentration of the sulfuric acid, c = 2.30 M
The concentration of the base, [tex]c_{base}[/tex] = 1.00 M
Let the mole ratio of the acid to base be 1 : x
The number of moles of sulfuric acid present, n = c × V
∴ n = 2.30 M/L × 25.3 × 10⁻³ L = 0.05819 moles
The number of moles of sulfuric acid present, n = 0.05819 moles
1 mole of sulfuric acid combines with x moles of base
Therefore, 0.05819 moles of sulfuric acid will combine with 0.05819·x moles of base
The number of moles of base, [tex]n_{base}[/tex] = 0.05819·x moles
Therefore, the volume of base, [tex]V_{base}[/tex] = [tex]n_{base}[/tex]/[tex]c_{base}[/tex]
∴ [tex]V_{base}[/tex] = 0.05819·x/1 ≈ 0.05819·x L
The volume of base, [tex]V_{base}[/tex] ≈ 0.05819·x L.
Products formed when chlorine is produced by the electrolysis of concentrated sodium chloride solution
The products formed during electrolysis of concentrated sodium chloride solution are SODIUM HYDROXIDE and HYDROGEN GAS.
ELECTROLYSIS is the process by which electrolytes allows electric current to pass through it and is decomposed on the process.
CHLORINE is an element which can be produced industrially through the process of electrolysis of brine (concentrated sodium chloride solution). When sodium chloride is dissolved in water, it's ions separate and are capable of conducting electricity.
The products formed during this process includes:
chlorine sodium hydroxide and hydrogen gas.CHLORINE: this is released at the positive electrode during electrolysis. It is used for the following purposes:
it is used for sterilisation of water for domestic and industrial use it is used as a bleaching agent for cotton, linen and wood-pulp.SODIUM HYDROXIDE: this remains in the solution during electrolysis. It is used for the following:
processing food products, removing pollutants from water and manufacture of paper.HYDROGEN GAS:this is released at the negative electrode during electrolysis. this is used for the following:
manufacture of ammonia, hydrochloric acid and methanol it serves as constituents of many gaseous fuels such as water gas and coal gasTherefore other products during electrolysis of concentrated sodium chloride solution are SODIUM HYDROXIDE and HYDROGEN GAS.
learn more here:
https://brainly.com/question/13123512
what’s the name of the organic molecule
Answer:
hexane
Explanation:
This is a 6- carbon hydrocarbon with no multiple bonds or any functional groups (such as -OH). Thus, the prefix 'hex' refers to the 6 carbons and 'ane' refers to the molecule being an alkane.
Naming molecules:
Number of carbons
• pentane: 5 carbons
• hexane: 6 carbons
• heptane: 7 carbons
• octane: 8 carbons
• nonane: 9 carbons
Functional groups (for 6- carbons molecules)
• Alkene (C=C): hexene
• Alcohol (-OH): hexanol
• Alkyne (C≡C): hexyne
burning sugar is a chemical change give reason?
Burning a sugar cube is a chemical change. Fire activates a chemical reaction between sugar and oxygen. The oxygen in the air reacts with the sugar and the chemical bonds are broken. Burning sugar leads to reaction of sugar with oxygen in air and leads to formation of carbon dioxide and water. The change is irreversible and is thus a chemical change
accessory pigments A) transfer electrons to reaction center chlorophylls. B) transfer energy to reaction center chlorophylls. C) transfer electrons from reaction center chlorophylls to pheophytins. D) transfer electrons from reaction center chlorophylls to ferredoxin. E) All of these statements are true.
Answer:
B. Transfer energy to reaction center chlorophylls.
Explanation:
Accessory pigments absorbs sunlight, these compounds are found in photosynthetic organisms, which work in conjunction with chlorophyll. Acessory pigments absorbs and transfer light energy to reaction center chlorophylls.
What is the concentration of a solution formed by diluting 25.0 ml of a 3.8M glucose solution to 250ml
Explanation : số mol glucose 3.8M là :
n = Cm . V = 3.8 . 25 =95
=> Cm khi pha loãng = [tex]\frac{n}{V}[/tex] = [tex]\frac{95}{250}[/tex] = 0.38M
According to molar concentration, the concentration of a solution formed by diluting 25.0 ml of a 3.8 M glucose solution to 250 ml is 0.38 M.
What is molar concentration?Molar concentration is defined as a measure by which concentration of chemical substances present in a solution are determined. It is defined in particular reference to solute concentration in a solution . Most commonly used unit for molar concentration is moles/liter.
The molar concentration depends on change in volume of the solution which is mainly due to thermal expansion. Molar concentration is calculated by the formula, molar concentration=mass/ molar mass ×1/volume of solution in liters.
In terms of moles, it's formula is given as molar concentration= number of moles /volume of solution in liters.In case of 2 solutions given it is calculated as M₁V₁=M₂V₂,on substitution, M₂=3.8×25/250=0.38 M.
Thus, the concentration of a solution formed by diluting 25.0 ml of a 3.8 M glucose solution to 250 ml is 0.38 M.
Learn more about molar concentration,here:
https://brainly.com/question/21841645
#SPJ5
what is precipitating ???
anyone please tell me how to delete an I'd
Explanation:
Desposition of solid matter in a solution
H3C6H507 + H2O + H3O+ + H2C6H507
acid
base
Explanation:
an acid will give away a proton and become a conjugate base.
A base will accept a proton and become a conjugate acid.
which statement is generally true about CaCaI2 ?
Explanation:
"Its bonds are formed by large differences in electronegativity" is the statement among the choices given in the question that is generally true about CaCl2.
which of the following has more atoms 3.14 g Cu or 1.10 g of H? Explain
how can you separate mixture of suphur, nacl and nh4cl
Answer:
Ammonium chloride, iron ,Sulphur and salt mixed together... they can be separated in the following methods.
1. Ammonium chloride is separated by sublimination... NC4CI is sublimable. Heat the mixture in a china dish and collect the funds of NC4CI (sublimable substance)
2. Bring a magnet close to the remaining mixture. Iron is magnetic substance and thus, it will be attracted towards the magnet. Iron is separated.
3. Sulphur is insoluble in water and salt is soluble. Add water to the remaining mixture and then wait for sedimentation. Separate the sulphur by decantation.
4. Heat the filtered salt solution to obtain salt.
Emission and abpsorption spectra from a given atom or molecule can tell us: Group of answer choices the composition of substances, even at great distances away, by identifying its uniques spectral fingerprint. The motion toward or away from us based on the doppler effect and corresponding red shift or blue shift The temperature of an object by using Wien's Law. All of the above.
Answer:
The motion towards or away from us based on the Doppler effect and corresponding red shift or blue shift.
Explanation:
The emission and absorption spectra demonstrates the lines where light has been absorbed by the atoms. The spikes can be observed due to atoms releasing photons at those wavelengths. Infrared and ultra violet waves can be observed during spectroscopy.
How many moles are in 68 liters of H2S gas at STP? :}
Answe:
Explanation:
số mol của H2S là : 68/22.4=3.03 nha
If an atom of chlorine (CI) were to ionize, it would
electron(s).
Answer:
Explanation:
As per being a Group 7 element, it would gain one electron, which changes it's charge to 1-. It is therefore negatively charged, having a full outer shell of 8, having its electronic structure to be at 2,8,8.
Can someone do these? Brainliest included
Answer:
Explanation:
6. p⁺ e⁻
Ca²⁺ 20 18
F⁻ 9 10
O²⁻ 8 10
Na⁺ 11 10
7. Physical properties of matter are properties that can be measured or observed without matter changing to an entirely different substance. These include odor, boiling point, melting point, density, electrical conductivity and heat conductivity.
Separation of mixture:
Chromatography involves solvent separation on a solid medium.
Distillation takes advantage of differences in boiling points.
Evaporation removes a liquid from a solution to leave a solid material.
Filtration separates solids of different sizes.
Funnel partitioning with solvents. Solvent dissolves one component but not the other.
8.Bulk Elements => Carbon, Hydrogen, Oxygen, Nitrogen, Sulfur & Phosphouous
Microminerals are those minerals needed in less than 100 mg quantities. Trace minerals or trace elements are usually needed in microgram quantities. Microminerals include iron, zinc, copper, iodine, fluoride, chromium, cobalt, selenium, manganese, and molybdenum.
Diatomic Molecules => H₂, N₂, O₂, F₂, Cl₂, Br₂, I₂
9. Electron Configurations
Na: 1s²2s²2p⁶3s¹ => valence = 3s¹
N: 1s²2s²2p³ => valence = 2s²2p³
Al: 1s²2s²2p⁶3s²3p¹ => valence = 3s²3p¹
Valence is the highest principle quantum number (or, principle energy level ~ ring) in the electron configurations.
10.moles of glucose = 450g/180.16 g/mol =2.50 moles
C₂H₆O₂ = 2(12) + 6(1) + 2(16) = 24 + 6 + 32 = 62 g/mole
25.Which of the following reaction will not take place?
A. Zn+ FeSO4 → ZnSO4 + Fe
C. Fe + NiSO4 → FeSO4 + Ni
B. 2Al + 3MgSO4→ Al2(SO4)3 + 3Mg D.
Cu + 2AgNO3 → Cu(NO3)2 + 2Ag
Answer:
B
Explanation:
because Mg is stronger than Al
Write a balanced molecular equation describing each of the following chemical reactions.
(a) Solid calcium carbonate is heated and decomposes to solid calcium oxide and carbon
dioxide gas.
(b) Water vapor
Answer:
don't know..............
Which of the following oxides is amphoteric oxide?
A)Na2O
B)Al2O3
C)MgO
D)SO2
Answer:
absolutely B because Al2O3 could react with axit and bazo
Explanation:
Answer:
"Aluminum oxide, beryllium oxide, tin oxide, zinc oxide all are amphoteric. They have reactions as both a base and an acid."
Explanation:
What is the density of ammonia (NH3) at 273 K and 1.00 atm?
A - 0.7601 g/L
B - 0.982 g/L
C - 1.23 g/L
D - 2.43 g/L
Answer:
0.7602 g/L
Explanation:
We'll begin by calculating the molar mass of NH₃. This can be obtained as follow:
Molar mass of NH₃ = 14.01 + (3×1.01)
= 14.01 + 3.03
= 17.04 g/mol
Finally, we shall determine the density of ammonia, NH₃. This can be obtained as follow:
Temperature (T) = 273 K
Pressure (P) = 1 atm
Molar mass of NH₃ (M) = 17.04 g/mol
Gas constant (R) = 0.0821 atm.L/Kmol
Density (D) =?
D = PM / RT
D = (1 × 17.04) / (0.0821 × 273)
D = 17.04 / 22.4133
D = 0.7602 g/L
Answer:
It is A
Explanation:
how is electrovalent bond formed ? Describe with an example .
Answer:
For example, the bond between the sodium and chlorine atoms in sodium chloride (NaCl) is formed by the transfer of an electron from sodium to chlorine, creating Na + and Cl – ions. ... The electrostatic attraction between these ions provides the bonding in NaCl.
Which of the following is true about science?
It is not influenced by social conditions.
Economic concerns may prevent it from solving problems.
It is not determined by external local factors.
Political conditions are unable to influence it.
Answer:
The correct answer is - Economic concerns may prevent it from solving problems.
Explanation:
Scientific research is influenced by various factors. Science helps in the solving of human problems. However, scientific research can need to be supported by many factors such as Huge amounts of money that need to be invested in performing out particular scientific research to solve problems.
For science, there are requirements of Laboratories and lab supplies such as the equipment and experts need to train the personnel on how to use it.
Thus, economic factors play a huge role in scientific research.
Which atom is abundant in the universe
Answer:
hydrogen is abundant in nature
PLZ HELP ME WITH MY WORK
Which is an example of using a physical model to represent an earthquake?
O A. Using a computer to measure what happens during an earthquake
O B. Thinking of an earthquake as someone jumping on the bed next to YOU
C. Calculating the movement of the ground during an earthquake
O D. Shaking a cake that has models of buildings on it SUBMIT
Answer:
D. Shaking a cake [...]
Explanation:
None of the rest are actual physical models representing earthquakes.
Hope that's right! :D
How many Calcium (CA) Atoms are in Calcium Oxide
