An astronaut on Pluto attaches a small brass ball to a 1.00-m length of string and makes a simple pendulum. She times 10 complete swings in a time of 257 seconds. From this measurement she calculates the acceleration due to gravity on Pluto. What is her result

Answer:

D)0.0889kg

Explanation:

If a large atomic bomb produces around 8.00x10¹⁵J of energy, then from Einstein's energy law i.e E=mc² we can calculate that the amount of matter is  0.0889kg. The correct option is D.

The Einstein Energy Law, often referred to as Einstein's famous equation relates the energy of a particle (E) to its mass (m) and the speed of light (c). The equation is as follows:

E = mc²

This equation shows that energy (E) and mass (m) are equivalent and interchangeable and that a small amount of mass can be converted into a large amount of energy. This is the basis for understanding nuclear reactions and the energy released in processes like nuclear fusion and fission.

Here in the question,

To calculate the mass that is converted into energy in an 8.00x10¹⁵J nuclear reaction, we can rearrange the equation to solve for m:

m = E / c²

where c = 3 x 10⁸ m/s is the speed of light in a vacuum.

Substituting the values, we get:

m = 8.00x10¹⁵ J / (3 x 10⁸ m/s)²

m = 0.0889kg

Therefore, a large atomic bomb that produces around 8.00x10¹⁵ J of energy converts approximately 0.0889kg of matter into energy. This is a very small amount of matter, but because c² is such a large number, a huge amount of energy can be released from a small amount of matter in a nuclear reaction.

To learn more about Einstein's energy law click:

https://brainly.com/question/2292817

#SPJ2

Answer:

SI unit is an internationally accepted system and have the same value all over the world .

I don't know the importance sotry

Answer:

SI unit is an internationally accepted system that have same value all over the world.

Answer:

The beam balance is a device used for the determination of the mass of a body under gravitation. Beam balance is used for high precision measurements like masses up to 250g, it consists of a pair of scale pans one at each end of a rigid beam.

we use a scale to measure the weight of our bodies

Answer:

13.759 % of the initial mechanical energy is lost as thermal energy.

Explanation:

By the First Law of Thermodynamics we know that increase in internal energy of the object ([tex]U[/tex]), in joules, is equal to the lost amount of the change in gravitational potential energy ([tex]U_{g}[/tex]), in joules:

[tex]\frac{x}{100} \cdot \Delta U_{g} = \Delta U[/tex] (1)

Where [tex]x[/tex] is the percentage of the energy loss, no unit.

By definition of the gravitational potential energy and internal energy, we expand this equation:

[tex]\frac{x\cdot m \cdot g \cdot h}{100} = m\cdot c\cdot \Delta T[/tex] (1b)

Where:

[tex]m[/tex] - Mass of the object, in kilograms.

[tex]g[/tex] - Gravitational acceleration, in meters per square second.

[tex]h[/tex] - Initial height of the object above the lunar ground, in meters.

[tex]c[/tex] - Specific heat of aluminium, in joules per degree Celsius-kilogram.

[tex]\Delta T[/tex] - Temperature increase due to collision, in degree Celsius.

If we know that [tex]m = 0.95\,kg[/tex], [tex]g = 9.807\,\frac{m}{s^{2}}[/tex], [tex]h = 75\,m[/tex], [tex]c = 920\,\frac{J}{kg\cdot ^{\circ}C}[/tex] and [tex]\Delta T = 0.11\,^{\circ}C[/tex], then the percentage of energy loss due to collision is:

[tex]x = \frac{100\cdot c\cdot \Delta T}{g\cdot h}[/tex]

[tex]x = \frac{100\cdot \left(920\,\frac{J}{kg\cdot ^{\circ}C} \right)\cdot (0.11\,^{\circ}C)}{\left(9.807\,\frac{m}{s^{2}} \right)\cdot (75\,m)}[/tex]

[tex]x = 13.759\,\%[/tex]

13.759 % of the initial mechanical energy is lost as thermal energy.

Answer:

The new force will be 4times the original

Answer:

Explanation:

Vernier scale

Mathematical tool

A vernier scale, named after Pierre Vernier, is a visual aid to take an accurate measurement reading between two graduation markings on a linear scale by using mechanical interpolation; thereby increasing resolution and reducing measurement uncertainty by using vernier acuity to reduce human estimation error. Wikipedia

Purpose: Measuring more precisely than could be done unaided when reading a uniformly divided straight or circular measurement scale

Creator: Pierre Vernier

Year invented: 1631

..............................................................................................................................................................................................................................................................................................

A micrometer is a measuring instrument that can make extraordinarily precise measurements. Most micrometers are designed to measure within one one-thousandth of an inch! That's a close fit. Exact measurements like this are necessary when even the smallest of space between objects can cause problems or difficulties.

Micrometer

Mathematical tool

A micrometer, sometimes known as a micrometer screw gauge, is a device incorporating a calibrated screw widely used for accurate measurement of components in mechanical engineering and machining as well as most mechanical trades, along with other metrological instruments such as dial, vernier, and digital calipers. Wikipedia

Operation supported: Component measurement

Purpose: Precision measurement of a component

Variant: Digital mics, Bench micrometer, Limit mics, Digit mics, MORE

Component: Screw, Spindle, Ratchet stop, Anvil, Frame, Barrel, Thimble lock, Thimble

Application: Mechanical Engineering, Machining

Answer:

D. crystalline solid that conducts current under certain conditions

Explanation:

Semiconductors are crystalline solids that has the ability to conduct electrical currents but on certain conditions e.g heat. The conduction of semiconductors is less than that of conductors (metals) but more than insulators (nonmetals), hence, they are said to be intermediates of conductors and insulators in terms of electrical conductivity.

Examples of semiconductors are silicon, boron, carbon, germanium, arsenic etc.

Answer:

Rotational kinetic energy

Explanation:

It is caused by circular motion.

Answer:

D) crystalline solid that conducts current under certain conditions

Explanation:

A semiconductor is any crystalline solid material whose electrical conductivity is intermediary between that of insulators and conductors. That is, a semiconductor does not conduct like a conductor but does more than an insulator.

Based on this, a semiconductor is said to only conduct electricity under certain conditions as opposed to conductors that do so under any condition. Example of semiconductors are silicon, carbon, antimony, arsenic etc.

Answer:

??????? what language is this. um A then

Answer:

A. Contains DNA

C. Contains ribosomes

F. Lacks a nucleus

Explanation:

Answer:

Explanation:

I answered this in question #24313516

Answer: The answer is B

Explanation:

There are 4 fundamental forces that hold matter together.

- Gravitational Force

- Electromagnetic Force

- Strong Nuclear Force

- Weak Nuclear Force

We have barely just scratched the info about nuclear forces but the reason why B is the answer to the question is that Strong nuclear force actually holds the protons and neutrons together in the nucleus of an atom, much like the picture in B.

Answer: B

Explanation:

Answer:

(a) 11.3 T

(b) 6.09 T

Explanation:

Current, I = 14 kA = 14000 A

number of turns, N = 900

inner radius, r = 0.7 m

outer radius, R = 1.3 m

The magnetic field due to a circular coil is given by

[tex]B = \frac{\mu o}{4\pi}\times \frac{2 N\pi I}{R}[/tex]

(a) The magnetic field due to the inner radius is

[tex]B = 10^{-7}\times \frac{2\times 900\times 3.14\times 14000}{0.7}\\\\B = 11.3 T[/tex]

(b) The magnetic field due to the outer radius is

[tex]B = 10^{-7}\times \frac{2\times 900\times 3.14\times 14000}{1.3}\\\\B = 6.09 T[/tex]

The Weight of an object is more at pole and less at equator of the earth because the distance of the pole is less than the distance of the equator from the centre of the earth.

Answer:

Option A.

Explanation:

We define the half time T as the time such that an initial quantity A reduces to its half.

So we can model the quantity as a function of time like:

P(t) = A*e^(-k*t)

Then for the half time, T, we will have:

P(T) = A/2 = A*e^(-k*T)

solving for k, we get:

A/2 = A*e^(-k*T)

1/2 = e^(-k*T)

ln(1/2) = ln( e^(-k*T)) = -k*T

-ln(1/2)/T = k

Here we know that the half time is T = 26.5s

if we input that in the above equation, we get:

-ln(1/2)/26.5s = k = 0.0262 s^-1

Then the correct option is A

Tenemos un problema de termodinamica sobre gases ideales, los cuales pueden ser descritos por la ecuación de estado del gas ideal

[tex]P*V = n*R*T[/tex]

donde:

P = presión

V = volumen

n = número de moles

R = constante de los gases

T = temperatura.

1) Para el primer problema podemos pensar que el gas dentro del globo es un gas ideal:

Originalmente sabemos que n = 4 y V = 5.0 L

Entonces tendremos:

[tex]P*(5.0 L) = (4 moles)*R*T[/tex]

Ahora decidimos agregar 8 moles más, dejando constante la presión y la temperatura, entonces podemos reescribir la ecuación de arriba como:

(5.0L)/(4 moles) = R*T/P

Y como R, T y P son constantes, entonces:

R*T/P es una constante.

Esto quiere decir que cuando agreguemos 8 moles, para tener un total de 12 moles, tendremos que:

V'/(12 moles) = R*T/P = (5.0L)/(4 moles)

Donde V' es el nuevo volumen final del globo, y es lo que queremos obtener.

V'/(12 moles) =  (5.0L)/(4 moles)

V' =   (5.0L)*(12 moles)/(4 moles) = (5.0 L)*3 = 15.0 L

2) Queremos obtener la densidad en gramos sobre litro de un gas con una masa molar de 60g/mol, a P = 0.75 atm y T = 25°C.

Primero pasemos la temperatura a grados kelvin:

T = 25°C = (25 + 273.15)°K = 298.15°K

Planteamos la ecuación del gas ideal:

[tex]P*V = n*R*T[/tex]

reemplazando R = 0.082 (atm*L/mol*k), además de la presión y la temperatura para un solo mol de gas:

[tex](0.75 atm)*V = (1 mol)*(0.082 (atm*L/mol*k))*(298.15°K)[/tex]

Resolviendo para V obtenemos que:

[tex]V = (1 mol)*(0.082 (atm*L/mol*k))*(298.15°K)/(0.75 atm) = 32.597 L[/tex]

Así, vemos que un mol de este gas ocupa un volumen de  32.597 L

Y también sabemos que un mol de este gas pesa 60 gramos.

Recordando que la densidad es el cociente entre la masa y el volumen, podemos ver que la densidad del gas será:

[tex]d = 60g/(32.597 L) = 1.84 g/L[/tex]

Si deseas leer mas sobre el tema, podes ver:

https://brainly.com/question/18528542

Answer:

D. Meters/Seconds

Explanation:

The time period of a wave is measured in seconds.

A typical wave involves both time and distance.  Consider a sound wave, which is basically a periodic modulation of the local air pressure.  We "hear" the sound because our ears respond to the variations of pressure.

The most common metric of a sound wave is frequency.  This is the rate at which the change in pressure occurs, and is measured in cycles per second, formally known as "hertz".  The period is the inverse of frequency andl has the units of seconds per cycle, commonly stated simply as seconds.

Answer:

Explanation:

High concentrations of hydrogen ions yield a low pH (acidic substances), whereas low levels of hydrogen ions result in a high pH (basic substances). The overall concentration of hydrogen ions is inversely related to its pH and can be measured on the pH scale

Answer:

the magnetic compass is used to determine direction because it is one of the most accurate form of magnet as we already know that a freely suspended magnet always faces towards north direction and south direction

Answer:

8392

Explanation:

d=s/t

Answer:

The result of pressure within a confined aquifer that creates a potentiometric surface

Explanation:

There are conditions under the Earth's surface, where porous rock layers are tilted and also have a confining, less porous, rock layer about the their boundary, forming a confined aquifer. The existing pressure in the aquifer is therefore confined within the water and the porous  rock layer, such that drilling into the pressurized aquifer leads to the water rising under the pressure existing in the aquifer, to a potentiometric surface which is above the actual underground level of the aquifer

Answer:

a plumber

Explanation:

Answer:

Standard units are the units we usually use to measure the weight, length or capacity of objects.

Answer:

THE SYSTEM OF UNITS WHICH IS AGREED BY THE INTERNATIONAL CONVENTION OF SCIENTISTS HELD IN FRANCE IN 1960 IS CALLED SI SYSTEM.

That's a parallel circuit. (B)

When current from Point-A reaches the 3-way intersection just to the right of Point-B, it has to make a choice:  Either turn left, go through B, and light the lower bulb, or go straight and light the upper bulb.

A circuit that has any "decision" points in it is a parallel circuit.  What happens in the real world is:  The current splits up.  Some of the current that reaches the intersection turns left toward Point-B, and the rest of it goes straight up.

A series circuit is one in which there's only one possible path all the way around.  There are no intersections of more than 2 roads, and no electron ever has to decide which way to flow.

An open circuit is one in which there's a break somewhere along the line and electrons can't jump across it.  It's like a railroad where a big piece is cut out of the track somewhere.  So no trains can travel on that route, and there's no current flowing anywhere in the circuit.

I'm not so sure about a "combination" circuit.  I guess you could give that name to a complicated circuit that has some series parts and some parallel-parts.  Personally, I'd call that a "series-parallel" circuit.  But it really doesn't matter right now.  Whatever the word means, the circuit in the picture is definitely not a "combination" circuit.

Answer:

B. Parallel Circuits

Explanation:

A parallel circuit is constructed by connecting the terminals of all the individual load devices so that the same value of voltage appears across each component. In a parallel circuit, charge divides up into separate branches such that there can be more current in one branch than there is in another.

hope i helped

Answer:

120 Nm-1

Explanation:

Según la ley de Hooke;

F = Ke

F = fuerza sobre el resorte

K = constante de fuerza

e = extensión

Por eso;

K = F / e

K = 24N / 20 × 10 ^ -2m

K = 120 Nm-1

Answer:

electric current=ampere(A)

force=Newton (N)

area=metres square(m^2)

power=watt(w)

density=kg/m3 

amount of substance =mole per cubic meter (mol/m3).

volume=cubic meter (m3),

Answer:

thanks for brainlist brother.........

Answer:

The force applied to make the object move

Answer:

input work = output work

E * ED = L* LD

Explanation:

The principle of lever is that input work is always equal to output work .