A metal (C = 0.2158 cal/g· °C) is removed from a hot (350. °F) oven in which it had achieved thermal equilibrium. The metal is placed into 200. mL acetic acid. The temperature of the acid increases to 90.3 °C from 24.3 °C. What is the mass of the metal? (dacetic acid = 1.04 g/cm3; Cs, acetic acid = 2.055 J/g·°C) Group of answer choices 120. g 362 g 1452 g 347 g 281 g

Water, mercury chloride and nitrogen oxide.

Water, mercury chloride and nitrogen oxide will present in the precipitate when we slowly add a solution of mercury(II) nitrate to a solution of aqueous hydrochloric acid having halide ions both in equal concentrations. The equation of this reaction is Hg2(NO3)2 + 4 HCl ----> 2 HgCl2 + 2 H2O + 2 NO so it is concluded that from this reaction we get precipitate of water, mercury chloride and nitrogen oxide.

https://brainly.com/question/24261598.

Answer:

phase transition from a solid to a gas

Explanation:

Entropy refers to the degree of disorderliness in a system. The more disorderly a system is, the greater the entropy of the system.

Decrease in the number of moles of a gas decreases the entropy of the system. Similarly, the entropy of solids is less than that of liquids. The entropy of liquids is less than that of gases.

Therefore, a change of phase from solid to gas represents an increase in entropy of the system.

The formula of manganese (IV) oxide is MNO2

The formula for manganese (IV) oxide is [tex]MnO_4[/tex]. Therefore, the correct option is A.

A manganese atom is bonded to four oxygen atoms to produce an inorganic compound known as manganese(IV) oxide with the chemical formula [tex]MnO_4[/tex]. It is often referred to as manganese dioxide. The +4 oxidation state of a manganese compound is indicated by the Roman numeral "IV" in the name.

Pyrolusite, a naturally occurring mineral, is a dark brown or black solid consisting of manganese(IV) oxide. Due to its favorable properties, it is often employed in a wide variety of applications. It acts as a catalyst, especially when breaking down hydrogen peroxide. Additionally, it is used to make batteries, ceramics, glass and pigments.

Therefore, the correct option is A.

Learn more about chemical formula, here:

https://brainly.com/question/32018188

#SPJ6

Answer:

False

Explanation:

The first reaction is;

NO(g) + 1/2O2(g) ---->NO2(g)

K= [NO2]/[NO] [ O2]^1/2

The second reaction is;

2NO(g) + O2(g) ---->2NO2(g)

K'= [NO2]^2/[NO]^2 [O2]

It now follows that;

K'= K^2

Hence the statement in the question is false

Answer:

I think its A maybe am not sure

Answer:

O2 is limiting reactant

Explanation:

To find the limiting reactant we need to convert the mass of each reactant to the moles using the formula weight. And, as 1 mole of C6H12O6 reacts with 6 moles of O2, we can know wich reactant will be over first (Limiting reactant) as follows:

Moles C6H12O6:

650g * (1mol/180.16g) = 3.608 moles C6H12O6

Moles O2:

650g * (1mol/32g) = 20.31 moles O2

Now, for a complete reaction of 3.608 moles of C6H12O6 are required:

3.608 moles C6H12O6 * (6mol O2 / 1mol C6H12O6) = 21.65 moles O2

As there are just 20.31 moles of O2,

Answer:

COOHCOOH + 2OH⁻ ⇄  C₂O₄²⁻ + 2H₂O

Explanation:

The reaction of oxalic acid with a strong base like sodium hydroxide is the following:

COOHCOOH + OH⁻ ⇄ COOHCOO⁻ + H₂O    (1)

In this first reaction, the oxalic acid loses one proton. In a second reaction with NaOH, the ion COOHCOO⁻ loses its second proton to form ion oxalate as follows:

COOHCOO⁻ + OH⁻ ⇄ C₂O₄²⁻ + H₂O      (2)  

The general reaction between oxalic acid and NaOH is (eq 1 + eq 2):

COOHCOOH + 2OH⁻ ⇄  C₂O₄²⁻ + 2H₂O              

I hope it helps you!  

Answer:

7.93 × 10⁻⁵ mol

Explanation:

Step 1: Calculate the pressure of hydrogen

The total pressure is the sum of the partial pressures of hydrogen and water vapor.

P = pH₂ + pH₂O

pH₂ = P - pH₂O

pH₂ = 95.090 mmHg - 12.8 mmHg = 82.3 mmHg

We can convert it to atm using the conversion factor 1 atm = 760 mmHg.

82.3 mmHg × 1 atm/760 mmHg = 0.108 atm

Step 2: Convert 15.0 °C to Kelvin

We will use the following expression.

K = °C + 273.15 = 15.0 + 273.15 = 288.2 K

Step 3: Calculate the moles of hydrogen

We will use the ideal gas equation.

P × V = n × R × T

n = P × V / R × T

n = 0.108 atm × 0.0173800 L / (0.0821 atm.L/mol.K) × 288.2 K

n = 7.93 × 10⁻⁵ mol

Answer:

See explanation and image attached

Explanation:

Aromatic compounds undergo electrophilic aromatic substitution reactions in which the aromatic ring is maintained.

Substituted benzenes may be more or less reactive towards electrophilic aromatic substitution than benzene depending on the nature of the substituent present in the ring.

Substituents that activate the ring towards electrophilic substitution such as -OCH3 are ortho-para directing.

The major products of the bromination of anisole are p-bromoanisole and o-bromoanisole. The resonance structures leading to these products are shown in the image attached.

Answer:

When atoms approach one another closely, the electron clouds interact with each other and with the nuclei. If this interaction is such that the total energy of the system is lowered, then the atoms bond together to form a molecule.

Explanation:

Answer:

Line graphs are used to track changes over short and long periods of time. When smaller changes exist, line graphs are better to use than bar graphs. Line graphs can also be used to compare changes over the same period of time for more than one group.

Answer:

water, when the metastable state is reached, is cooled below the zero temperature. It freezes abruptly. this is called metastable. They are not at equilibrium per se; as at negative temperatures the only equilibrium state of water is ice.

Explanation:

Answer:

6.4×10¯³ g of O₂.

Explanation:

We'll begin by writing the balanced equation for the reaction. This is given below:

CH₄ + 2O₂ —> CO₂ + 2H₂O

Next, we shall determine the masses of CH₄ and O₂ that reacted from the balanced equation. This can be obtained as follow:

Molar mass of CH₄ = 12 + (4×1)

= 12 + 4

= 16 g/mol

Mass of CH₄ from the balanced equation = 1 × 16 = 16 g

Molar mass of O₂ = 2 × 16 = 32 g/mol

Mass of O₂ from the balanced equation = 2 × 32 = 64 g

SUMMARY:

From the balanced equation above,

16 g of CH₄ reacted with 64 g of O₂.

Finally, we shall determine the mass of O₂ needed to react with 1.6×10¯³ g of CH₄. This can be obtained as illustrated below:

From the balanced equation above,

16 g of CH₄ reacted with 64 g of O₂.

Therefore, 1.6×10¯³ g of CH₄ will react with = (1.6×10¯³ × 64) / 16 = 6.4×10¯³ g of O₂

Thus, 6.4×10¯³ g of O₂ is needed for the reaction.

Answer:

it is 11.55 and ik because I just had that question

18.0 grams of copper(II) phthalocyanine would be produced by the complete cyclotetramerization of 0.125 moles of phthalonitrile in the presence of excess copper(II) chloride.

Let's consider the following balanced equation.

4 C₈H₄N₂(l) + CuCl₂(s) → Cu(C₃₂H₁₆N₈)(s) + Cl₂(g)

The molar ratio of C₈H₄N₂ to Cu(C₃₂H₁₆N₈) is 4:1. The moles of Cu(C₃₂H₁₆N₈) produced from 0.125 moles of C₈H₄N₂ are:

[tex]0.125 mol C_8H_4N_2 \times \frac{1molCu(C_{32}H_{16}N_8)}{4mol C_8H_4N_2} = 0.0313 molCu(C_{32}H_{16}N_8)[/tex]

The molar mass of Cu(C₃₂H₁₆N₈) is 576.07 g/mol. The mass corresponding to 0.0313 moles of Cu(C₃₂H₁₆N₈) is:

[tex]0.0313 moles \times \frac{576.07g}{mol} = 18.0 g[/tex]

18.0 grams of copper(II) phthalocyanine would be produced by the complete cyclotetramerization of 0.125 moles of phthalonitrile in the presence of excess copper(II) chloride.

You can learn more about stoichiometry here: https://brainly.com/question/9743981

Given concentration of NaCl=15%

Means ,

In every 100g of Solution 15g of NaCl is present .

Now

So ,

[tex]\\ \Large\sf\longmapsto 250\times 15\%[/tex]

[tex]\\ \Large\sf\longmapsto 250\times \dfrac{15}{100}[/tex]

[tex]\\ \Large\sf\longmapsto 37.5g[/tex]

37.5g of NaCl present in 250g of solution.

Answer:

Given concentration of NaCl=15%

Means ,

In every 100g of Solution 15g of NaCl is present .

Now

Given mass=250g

So ,

➡250 × 15%

➡250×15/100

➡37.5g

37.5g of NaCl present in 250g of solution.

Answer:

[tex]\%diff=24.0\%[/tex]

Explanation:

Hello there!

In this case, according to the given information, it turns out firstly necessary for us to set up the van der Waals' equation as shown below:

[tex]p=\frac{RT}{v-b}-\frac{a}{v^2}[/tex]

Thus, we secondly calculate the molar volume as:

[tex]v=\frac{0.8311L}{9.998mol} =0.083L/mol[/tex]

Then, we plug in the entire variables in the vdW equation to get such pressure:

[tex]p=\frac{0.08206\frac{atm*L}{mol*K}*502.7K}{0.08313L/mol-0.03219L/mol}-\frac{1.345L*atm/mol}{(0.08313L/mol)^2}\\\\p=615.2atm[/tex]

And the ideal gas pressure:

[tex]p=\frac{0.08206\frac{atm*L}{mol*K}*502.7K}{0.08313L/mol}\\\\p=496.2atm[/tex]

Finally, the percent difference:

[tex]\%diff=\frac{|496.2atm-615.2atm|}{496.2atm} *100\%\\\\\%diff=24.0\%[/tex]

Regards!

Answer:

velocity = distance/time

velocity = wavelength × frequency

Both of these are commonly known equations to calculate velocity with different variables.

Answer:

an alcohol is a Hydroxyl group due to the OH~ that is associated with it's molecules

The functional group found in an alcohol is Hydroxyl . Therefore, the correct option is option D.

A functional group in organic chemistry is a substituent and moiety inside a molecule that triggers the molecule's distinctive chemical processes. No matter how the rest of a molecule is made up, the very same functional group would experience the same or a similar set of chemical events.

This permits the design of synthetic chemistry as well as the methodical forecasting of chemical reactions as well as the behaviour of chemical molecules. Other functional groups close by can affect a functional group's reactivity. Retrosynthetic analysis can be used to design organic synthesis by using functional group interconversion. The functional group found in an alcohol is Hydroxyl .

Therefore, the correct option is option D.

To know more about functional group, here:

https://brainly.com/question/29263610

#SPJ7

Answer:

C

Explanation:

If he can't read his computer screen. Means his eyes have problem

A new member of your team is visually impaired. He's having a hard time reading his computer screen.  value diversity require computer usage. 12 Tell him that he might want to schedule an eye exam. Therefore, option C is correct.

Institutions and community members who value diversity do so in order to recognize the advantages of both their differences and commonalities. They make a deliberate effort to forge enduring connections between individuals and organizations with a broad membership.

When people's unique qualities, abilities, interests, and viewpoints are recognized and supported, they develop a stronger sense of self and health and achieve better results in their academic and professional endeavors.

Although diversity and inclusion are related ideas, they are not the same thing. Diversity has to do with representation or how something is put together. The degree to which the contributions, presence, and viewpoints of other groups of individuals are appreciated and incorporated into a setting is referred to as inclusion.

Thus, option C is correct.

To learn more about value diversity, follow the link;

https://brainly.com/question/13375809

#SPJ2

Answer:

a. Na(s); b. Al(s); c. Zn(s)

Explanation:

Let's consider the following redox reactions.

a. ZnCl₂ (aq) + 2 Na(s) → Zn(s) + 2 NaCl(aq)

Na is oxidized because its oxidation number increases from 0 to +1 (in NaCl) whereas Zn is reduced because its oxidation number decreases from 2+ (in ZnCl₂) to 0.

b. Al(s) + FeBr₃ (aq) → AlBr₃ (aq) + Fe(s)

Al is oxidized because its oxidation number increases from 0 to +3 (in AlBr₃) whereas Fe is reduced because its oxidation number decreases from 3+ (in FeBr₃) to 0.

c. FeSO₄ (aq) + Zn(s) → Fe(s) + ZnSO₄(aq)

Zn is oxidized because its oxidation number increases from 0 to +2 (in ZnSO₄) whereas Fe is reduced because its oxidation number decreases from 2+ (in FeSO₄) to 0.

Answer:

C

Explanation:

if we were to followw the IUPAC

Answer:

Modern windshields are generally made of laminated safety glass, a type of treated glass, which consists of, typically, two curved sheets of glass with a plastic layer laminated between them for safety, and bonded into the window frame.

Explanation:

mark me brain liest if my answer is correct

Answer:

for you ta bangla de Mayo for bangla ki you would know it has changed an anyone come by with home home but is in an going forward you as as on Saturday to what our current meeting office next weekend too with we before too

Explanation:

rdirr5idj5rxu5ujx464jzm64izu6jz46ukz454ukzutzne4i6kxl6iz46irlz6ikzrkdrrdkyjfr6jftjtcyyjtfjtfyjtfygtukk6g744C hubungi advisers seg4ygs4e for na bangla na for de you will could would need some you any other than hand ideas suggestions is still there still just going forward forward with and my you he that was there can go over on there about

Answer:

ufvkoo5dvjutfbnjiiihhb

The equilibrium constant K₁ = Equilbrium constant K₂.

The equilibrium constant, K, of a reaction, is defined as:

"The ratio between concentration of products powered to their reaction quotient and concentration of reactants powered to thier reaction quotient".

For the reaction:

aA + bB ⇄ cC + dD

The equilibrium constant, K, is:

[tex]K = \frac{[C]^c[D]^d}{[A]^a[B]^b}[/tex]

Now, assuming the reaction of the problem is 1:1:

A + B ⇄ C + D

[tex]K = \frac{[C][D]}{[A][B]}[/tex]

The concentrations of the reactants are directly proportional to the volume added. Thus, we can assume that concentration = Volume. Replacing for K₁ and K₂:

[tex]K_1 = \frac{[C][D]}{[10mL][10mL]} = K_1 = \frac{[C][D]}{100mL^2}[/tex]

In the same way:

[tex]K_2 = \frac{[C][D]}{[1mL][100mL]} = K_2 = \frac{[C][D]}{100mL^2}[/tex]

Thus, we can say:

Learn more about chemical equilibrium in:

https://brainly.com/question/4289021?referrer=searchResults

Answer:

d. 60.8 L

Explanation:

Step 1: Given data

Step 2: Calculate the work (W) done by the system

We will use the following expression.

ΔU = Q + W

W = ΔU - Q

W = -108.3 J - 53.1 J = -161.4 J

Step 3: Convert W to atm.L

We will use the conversion factor 1 atm.L = 101.325 J.

-161.4 J ×  1 atm.L/101.325 J = -1.593 atm.L

Step 4: Calculate the initial volume

First, we will use the following expression.

W = - P × ΔV

ΔV = - W / P

ΔV = - 1.593 atm.L / 0.677 atm = 2.35 L

The initial volume is:

V2 = V1 + ΔV

V1 = V2 - ΔV

V1 = 63.2 L - 2.35 L = 60.8 L

Answer:

5 × 10⁵ molecules (500,000 molecules)

Explanation:

Step 1: Convert 3 × 10⁻¹⁶ g to moles

We will use the molar mass of TCDD (321.97 g/mol).

3 × 10⁻¹⁶ g × 1 mol/321.97 g = 9 × 10⁻¹⁹ mol

Step 2: Convert 9 × 10⁻¹⁹ mol to molecules

The required conversion factor is Avogadro's number (6.02 × 10²³ molecules/mol).

9 × 10⁻¹⁹ mol × 6.02 × 10²³ molecules/1 mol = 5 × 10⁵ molecules

Answer:

a measure of concentration equal to the gram equivalent weight per liter of solution.

Explanation:

Gram equivalent weight is the measure of the reactive capacity of a molecule. The solute's role in the reaction determines the solution's normality. Normality is also known as the equivalent concentration of a solution.

hope it helped

Answer:

a)  [tex]V_1=5ul[/tex]

b)  [tex]v=20ul[/tex]

Explanation:

From the question we are told that:

initial Concentration [tex]C_1=50mg/ml[/tex]

Final Concentration [tex]C_2=10mg/ml[/tex]

Final volume needs [tex]V_2 =25ul[/tex]

Generally the equation for Volume is mathematically given by

[tex]C_1V_1=C_2V_2[/tex]

[tex]V_1=\frac{C_1V_1}{C_2}[/tex]

[tex]V_1=\frac{10*25}{50}[/tex]

[tex]V_1=5ul[/tex]

Therefore

The volume of buffer needed is

[tex]v=V_2-V_1\\\\v=25-5[/tex]

[tex]v=20ul[/tex]

Answer:

0.034 M

Explanation:

1/[A] = kt + 1/[A]o

[A] = ?

k= 0.04556

t= 10.0 minutes or 600 seconds

[A]o = 0.50 M

1/[A] = (0.04556 × 600) + 1/0.50

[A] = 0.034 M