(a) Joseph was pushing a car.On his observation found that it was easier to keep the car in moti with a smaller force than to start its motion. Explain why?​

Answers

Answer 1

Answer:

Newton's laws states that 'what is in motion, stays in motion until a external force is applied', when a car is already moving, it's in motion already but to start a car, you need to apply some force to get it going, that force isn't required for a moving car.


Related Questions

1. Why do only some people get addicted to
drugs?

Answers

Answer:

When drugs are taken in are body are brain release dopamine: which make us feel so pleasure and good, and for this some people are addicted to drugs which makes them feel good. on other hand damaging their health.

Difference between scissors and nut cracker​

Answers

but cracked cracks nuts while scripts cut

A horizontal board of negligible thickness and area 1.0 m2 hangs from a spring scale that reads 50 N when a 4.0 m/s wind moves above the board. The air below the board is stationary. What does the scale read when the wind stops? The density of air is 1.25 kg/m3 .

Answers


Scale reading for no wind
Explanation:
From the question we are told that
Area
Weight of board
Velocity
Density of air
Generally the equation for pressure difference by Bernoulli equation is mathematically given by


Generally force acting on the board by air is mathematically given by


Therefore
Scale reading for no wind W'


Scale reading for no wind W'=60Ng

Force, work,power and energy

Answers

Answer:

pull or push is called force. those activities in which a force is applied along distance is called work.the rate of doing work and some conversion of energy by a machine or person is called power.the capacity or ability to do work is called energy.this is the answer if u are asking for definition.

the rate of doing work is called power...

the capacity of doing work is called energy...

work is said to be done when the body moves in the direction of force applied....

Explanation:

i don't know what you want of those topics.i was confused and I write definition of them. I hope this will help you

What happens to the temperature of matter as distance is increased? Explain why.

Answers

Answer:

The tempature of the matter increases.

Explanation:

The matter is heated by friction, weather that is through the air or if its touching the ground like a car.

please mark me as brainliest of this is right, thanks

if C is the vector sum of A and B C=A+B what must be true about directions and magnitude of A and B if C=A+B? what must be true about the directions and magnitude of A and B if C=0​

Answers

The vector sum is the algebraic sum if the two vectors have the same direction.

The sum vector is zero if the two vectors have the same magnitude and opposite direction

Vector addition is a process that can be performed graphically using the parallelogram method, see  attached, where the second vector is placed at the tip of the first and the vector sum goes from the origin of the first vector to the tip of the second.

There are two special cases where the vector sum can be reduced to the algebraic sum if the vectors are parallel

case 1. if the two vectors are parallel, the sum vector has the magnitude of the sum of the magnitudes of each vector

case 2. If the two vectors are antiparallel and the magnitude of the two vectors is the same, the sum gives zero.

In summary in the sum of vectors If the vectors are parallel it is reduced to the algebraic sum, also in the case of equal magnitude and opposite direction the sum is the null vector

a) Magnitudes: [tex]\| \vec A\| \ge 0[/tex], [tex]\|\vec B\| \ge 0[/tex], [tex]\|\vec C\| \ge 0[/tex]; Directions: [tex]\theta_{A} \in (-\infty, +\infty)[/tex] for [tex]\|\vec A\|\ne 0[/tex]. Undefined for [tex]\|\vec A\| = 0[/tex], [tex]\theta_{B} \in (-\infty, +\infty)[/tex] for [tex]\|\vec B\|\ne 0[/tex]. Undefined for [tex]\|\vec B\| = 0[/tex], [tex]\theta_{C} \in (-\infty, +\infty)[/tex] for [tex]\|\vec C\|\ne 0[/tex]. Undefined for [tex]\|\vec C\| = 0[/tex].

b) Magnitudes: [tex]\|\vec A\| \ge 0[/tex], [tex]\|\vec B\| \ge 0[/tex], [tex]\|\vec C\| = 0[/tex]; Directions: [tex]|\theta_{A}-\theta_{B}| = 180^{\circ}[/tex], [tex]\theta_{C}[/tex] is undefined.

a) Let suppose that [tex]\vec A \ne \vec O[/tex], [tex]\vec B \ne \vec O[/tex] and [tex]\vec C \ne \vec O[/tex], where [tex]\vec O[/tex] is known as Vector Zero. By definitions of Dot Product and Inverse Trigonometric Functions we derive expression for the magnitude and directions of [tex]\vec A[/tex], [tex]\vec B[/tex] and [tex]\vec C[/tex]:

Magnitude ([tex]\vec A[/tex])

[tex]\|\vec A\| = \sqrt{\vec A\,\bullet\,\vec A}[/tex]

[tex]\| \vec A\| \ge 0[/tex]

Magnitude ([tex]\vec B[/tex])

[tex]\|\vec B\| = \sqrt{\vec B\,\bullet\,\vec B}[/tex]

[tex]\|\vec B\| \ge 0[/tex]

Magnitude ([tex]\vec C[/tex])

[tex]\|\vec C\| = \sqrt{\vec C\,\bullet \,\vec C}[/tex]

[tex]\|\vec C\| \ge 0[/tex]

Direction ([tex]\vec A[/tex])

[tex]\vec A \,\bullet \,\vec u = \|\vec A\|\cdot \|u\|\cdot \cos \theta_{A}[/tex]

[tex]\theta_{A} = \cos^{-1} \frac{\vec A\,\bullet\,\vec u}{\|\vec A\|\cdot \|u\|}[/tex]

[tex]\theta_{A} = \cos^{-1} \frac{\vec A\,\bullet\,\vec u}{\|\vec A\|}[/tex]

[tex]\theta_{A} \in (-\infty, +\infty)[/tex] for [tex]\|\vec A\|\ne 0[/tex]. Undefined for [tex]\|\vec A\| = 0[/tex].

Direction ([tex]\vec B[/tex])

[tex]\vec B\,\bullet \, \vec u = \|\vec B\|\cdot \|\vec u\| \cdot \cos \theta_{B}[/tex]

[tex]\theta_{B} = \cos^{-1} \frac{\vec B\,\bullet\,\vec u}{\|\vec B\|\cdot \|\vec u\|}[/tex]

[tex]\theta_{B} = \cos^{-1} \frac{\vec B\,\bullet\,\vec u}{\|\vec B\|}[/tex]

[tex]\theta_{B} \in (-\infty, +\infty)[/tex] for [tex]\|\vec B\|\ne 0[/tex]. Undefined for [tex]\|\vec B\| = 0[/tex].

Direction ([tex]\vec C[/tex])

[tex]\vec C \,\bullet\,\vec u = \|\vec C\|\cdot\|\vec u\|\cdot \cos \theta_{C}[/tex]

[tex]\theta_{C} = \cos^{-1}\frac{\vec C\,\bullet\,\vec u}{\|\vec C\|\cdot\|\vec u\|}[/tex]

[tex]\theta_{C} = \cos^{-1} \frac{\vec C\,\bullet\,\vec u}{\|\vec C\|}[/tex]

[tex]\theta_{C} \in (-\infty, +\infty)[/tex] for [tex]\|\vec C\|\ne 0[/tex]. Undefined for [tex]\|\vec C\| = 0[/tex].

Please notice that [tex]\vec u[/tex] is the Vector Unit.

b) Let suppose that [tex]\vec A \ne \vec O[/tex] and [tex]\vec B \ne \vec O[/tex] and [tex]\vec C = \vec O[/tex]. Hence, [tex]\vec A = -\vec B[/tex]. In other words, we find that both vectors are antiparallel to each other, that is, that angle between [tex]\vec A[/tex] and [tex]\vec B[/tex] is 180°. From a) we understand that [tex]\|\vec A\| \ge 0[/tex], [tex]\|\vec B\| \ge 0[/tex], but [tex]\|\vec C\| = 0[/tex].

Then, we have the following conclusions:

Magnitude ([tex]\vec A[/tex])

[tex]\|\vec A\| \ge 0[/tex]

Magnitude ([tex]\vec B[/tex])

[tex]\|\vec B\| \ge 0[/tex]

Magnitude ([tex]\vec C[/tex])

[tex]\|\vec C\| = 0[/tex]

Directions ([tex]\vec A[/tex], [tex]\vec B[/tex]):

[tex]|\theta_{A}-\theta_{B}| = 180^{\circ}[/tex]

Direction ([tex]\vec C[/tex]):

Undefined

Why we use semiconductor instead of metal in thermopile.

Answers

Answer:

Semiconductors are not normal materials. They have special properties which conductors/metals cannot exhibit. The main reason for the behavior of semiconductors is that they have paired charge carriers-the electron-hole pair. This is not available in metals.

the plane of a 5.0 cm by 8.0 cm rectangular loop wire is parallel to a 0.19 t magnetic field. if the loop carries a current of 6.2 amps, what is the magnitude of the torque on the loop

Answers

here is the state ment :0.2 loop

a person lifts 60kg on the surface of the earth, how much mass can he lift on the surface of the moon if he applies same magnitude of force​

Answers

Explanation:

Hey there!

According to the question;

A person can lift mass of 60 kg on earth.

mass(m1) = 60kg

acceleration due to gravity on earth (a) = 9.8m/s²

Now;

force (f) = m.a

= 60*9.8

= 588 N

Since, there is application of same magnitude of force on moon,

mass(m) =?

acceleration due to gravity on moon (a) = 1.67m/s²

Now;

force (f) = m.a

588 = m*1.67

m = 352.09 kg

Therefore, the person who can lift the mass of 60 kg on earth can lift mass of 352 kg on moon.

Hope it helps!

What's the minimum Out PUT WORK
required to raise 14,0m3 of water 26.0m?

Answers

Answer:

3.57 MJ

Explanation:

ASSUMING it's fresh water with density of 1000 kg/m³

W = ΔPE = mgΔh = 14.0(1000)(9.81)(26.0) = 3,570,840 J

Salt water would require more.

Two buses 'A' and 'B' are moving in the same direction with the velocities 30m/s and 40m/s respectively. Find the relative velocity of the bus 'A' with respect to the bus 'B'. Calculate the relative displacement between them after 4 minutes.:)

Hope who are reading this may have a good life;)

Lots of love from Nepal <3​

Answers

Relative Velocity, aVb:

[tex]{ \bf{ _{A} V_{B} =V_{A} - V_{B} }} \\ _{A} V_{B} = 30 - 40 \\ _{A} V_{B} = - 10 \: {ms}^{ - 1} \\ |_{A} V_{B}| = 10 \: {ms}^{ - 1} [/tex]

Relative displacement:

[tex] = \frac{ |_{A} V_{B}| }{time} \\ \\ = \frac{10}{4} \\ = 2.5 \: metres[/tex]

What is the solution to this equation?
X- 14 = -9
O A. x = 5
O B. x= -23
O c. x = 23
O D. x= -5

Answers

Answer:

X-14=9

x-14+14=9+14

x=23

Explanation:

Your answer is 23.

A diode has a power rating of 5W. If the diode voltage is 3.6V and the diode current is 1.75A, what is the power dissipation?​

Answers

Answer:

Explanation:

Power = current * voltage

Power = 3.6 * 1.75

Power = 6.3 watts.

I hope this diode does not have to do this for very long. The power dissipation is above the diode's rated power -- a condition that won't last forever.

The power dissipation is 6.3 watts.

(b) State the unit of volume in S.I. system and define it. 4.​

Answers

Answer:

the cubic meter (m3)

Explanation:

Volume is the measure of the 3-dimensional space occupied by matter, or enclosed by a surface, measured in cubic units. The SI unit of volume is the cubic meter (m3),

Answer:

please answer all  component's

Explanation:

please answer all  component's

Assume that Mars and Earth are in the same plane and that their orbits around the Sun are circles (Mars is ≈230×10^6km from the Sun and Earth is ≈150×10^6km from the Sun).
a) How long would it take a message sent as radio waves from Earth to reach Mars when Mars is nearest Earth?

b) How long would it take a message sent as radio waves from Earth to reach Mars when Mars is farthest from Earth?

Answers

Answer:

Explanation:

speed of light ≈ 300 000 000 m/s

a) How long would it take a message sent as radio waves from Earth to reach Mars when Mars is nearest Earth?

(230e9 - 150e9) / 3e8 = 277 s or 4 minutes 27 seconds.

b) How long would it take a message sent as radio waves from Earth to reach Mars when Mars is farthest from Earth?

(230e9 + 150e9) / 3e8 = 1267 s or 21 minutes 6 seconds.

The force of gravity is an inverse square law. This means that, if you double the distance between two large masses, the gravitational force between them Group of answer choices weakens by a factor of 4. strengthens by a factor of 4. weakens by a factor of 2. also doubles. is unaffected.

Answers

Answer:

the force decreases by a factor of 4

Explanation:

The expression for the law of universal gravitation is

          F = [tex]G \frac{m_1m_2}{r^2}[/tex]

let's call the force Fo for the distance r

          F₀ = [tex]G \frac{m_1m_2}{r^2}[/tex]

They indicate that the distance doubles

          r ’= 2 r

we substitute

          F = [tex]G \frac{m_1m_2}{(r')^2}[/tex]

          F = [tex]G \frac{m_1m_2}{r^2} \ \frac{1}{4}[/tex]

         

          F = ¼ F₀

consequently the correct answer is that the force decreases by a factor of 4

If the distance between two large masses are doubled, the gravitational force between them weakens by a factor of 4.

Let the initial force be F

Let the initial distance apart be r

Thus, we can obtain the final force as follow:

Initial force (F₁) = F

Initial distance apart (r₁) = r

Final distance apart (r₂) = 2r

Final force (F₂) =?

F = GM₁M₂ / r²

Fr² = GM₁M₂ (constant)

Thus,

F₁r₁² = F₂r₂²

Fr² = F₂(2r)²

Fr² = F₂4r²

Divide both side by 4r²

F₂ = Fr² /4r²

F₂ = F / 4

From the illustration above, we can see that when the distance (r) is doubled, the force (F) is decreased (i.e weakens) by a factor of 4

Learn more: https://brainly.com/question/975812

30 POINTS HELP PLEASE
A galvanometer consists of a loop of wire in a magnetic field.
Question 19 options:
True
False

Answers

Answer:

A galvanometer consists of a loop of wire in a magnetic field.

TRUE

The correct answer is true

DESCRIBE THE FORMATION OF THE SOLAR SYSTEM ACCORDING TO THE NEBULAR THEORY

Answers

When a cloud of gas and dust in space was disturbed, maybe by the explosion of a nearby star.This explosion made waves in space which squeezed the cloud of gas & dust.

A sinewave has a period (duration of one cycle) of 645 μs (microseconds). What is the corresponding frequency of this sinewave, in kHz

Answers

The corresponding frequency of this sinewave, in kHz, expressed to 3 significant figures is: 155 kHz.

Given the following data:

Period = 645 μs

Note: μs represents microseconds.

Conversion:

1 μs = [tex]1[/tex] × [tex]10^-6[/tex] seconds

645 μs = [tex]645[/tex] × [tex]10^-6[/tex] seconds

To find corresponding frequency of this sinewave, in kHz;

Mathematically, the frequency of a waveform is calculated by using the formula;

[tex]Frequency = \frac{1}{Period}[/tex]

Substituting the value into the formula, we have;

[tex]Frequency = \frac{1}{645 * 10^-6}[/tex]

Frequency = 1550.39 Hz

Next, we would convert the value of frequency in hertz (Hz) to Kilohertz (kHz);

Conversion:

1 hertz = 0.001 kilohertz

1550.39 hertz = X kilohertz

Cross-multiplying, we have;

X = [tex]0.001[/tex] × [tex]1550.39[/tex]

X = 155039 kHz

To 3 significant figures;

Frequency = 155 kHz

Therefore, the corresponding frequency of this sinewave, in kHz is 155.

Find more information: brainly.com/question/23460034

Three children are riding on the edge of a merry-go-round that is a solid disk with a mass of 102 kg and a radius of 1.53 m. The merry-go-round is initially spinning at 9.71 revolutions/minute. The children have masses of 31.7 kg, 29.0 kg and 31.9 kg. If the child who has a mass of 29.0 kg moves to the center of the merry-go-round, what is the new angular velocity in revolutions/minute

Answers

Three children of masses and their position on the merry go round

M1 = 22kg

M2 = 28kg

M3 = 33kg

They are all initially riding at the edge of the merry go round

Then, R1 = R2 = R3 = R = 1.7m

Mass of Merry go round is

M =105kg

Radius of Merry go round.

R = 1.7m

Angular velocity of Merry go round

ωi = 22 rpm

If M2 = 28 is moves to center of the merry go round then R2 = 0, what is the new angular velocity ωf

Using conservation of angular momentum

Initial angular momentum when all the children are at the edge of the merry go round is equal to the final angular momentum when the second child moves to the center of the merry go round  Then,

L(initial) = L(final)

Ii•ωi = If•ωf

So we need to find the initial and final moment of inertia

NOTE: merry go round is treated as a solid disk then I= ½MR²

I(initial)=½MR²+M1•R²+M2•R²+M3•R²

I(initial) = ½MR² + R²(M1 + M2 + M3)

I(initial) = ½ × 105 × 1.7² + 1.7²(22 + 28 + 33)

I(initial) = 151.725 + 1.7²(83)

I(initial) = 391.595 kgm²

Final moment of inertial when R2 =0

I(final)=½MR²+M1•R²+M2•R2²+M3•R²

Since R2 = 0

I(final) = ½MR²+ M1•R² + M3•R²

I(final) = ½MR² + (M1 + M3)• R²

I(final)=½ × 105 × 1.7² + ( 22 +33)•1.7²

I(final) = 151.725 + 158.95

I(final) = 310.675 kgm²

Now, applying the conservation of angular momentum

L(initial) = L(final)

Ii•ωi = If•ωf

391.595 × 22 = 310.675 × ωf

Then,

ωf = 391.595 × 22 / 310.675

ωf = 27.73 rpm

Answer: So, the final angular momentum is 27.73 revolution per minute

Read the following sentence from the article. Life can evolve into complex and specialized forms that exploit every possible niche in their surroundings. What is the definition of "exploit" as it is used in this sentence? A to turn to advantage B to invent a new application C to draw on an earlier experience D to narrow down options​

Answers

Answer:

C. To draw on an earlier experience.

Tectonic processes are fueled by heat from __________, while atmospheric convection is fueled by heat from ___________.
A. the core, the sun
B. asteroid impacts, radiation
C. the sun, the core
D. radiation, asteroid impacts

Answers

Tectonic processes are fueled by heat from the core, while atmospheric convection is fueled by heat from the sun. That is option A.

What are tectonic processes?

The tectonic processes is defined as the process catalysed by heat from the earth core that results to the structuring and properties of the earth crust. This results to the following:

convergent, where plates move into one another;

divergent, where plates move apart; and

transform, where plates move sideways in relation to each other.

Learn more about tectonic processes here:

https://brainly.com/question/30901514

#SPJ1

A mysterious constant force of 10 N acts horizontally on everything. The direction of the force is found to be always pointed toward a wall in a big hall. Find the potential energy of a particle due to this force when it is at a distance x from the wall, assuming the potential energy at the wall to be zero.

Answers

Answer:

it will be 10x

Explanation:

workdone(potential energy before it hits the wall)= horizontal force × distance

=10× x = 10x joules

A mysterious constant force of 10 N acts horizontally on everything. The direction of the force is found to be always pointed toward a wall in a big hall.The potential energy of a particle due to this force is  10x.

What is force?

A force is an effect that can alter an object's motion according to physics. An object with mass can change its velocity, or accelerate, as a result of a force. An obvious way to describe force is as a push or a pull. A force is a vector quantity since it has both magnitude and direction.

Given in the question a mysterious constant force of 10 N acts horizontally on everything. The direction of the force is found to be always pointed toward a wall in a big hall the potential energy,

Work done (potential energy before it hits the wall)

= horizontal force × distance

=10× x = 10x joules

The potential energy of a particle due to this force is  10x.

To learn more about force refer to the link:

brainly.com/question/13191643

#SPJ2

A single-slit diffraction pattern is formed on a distant screen. Assuming the angles involved are small, by what factor will the width of the central bright spot on the screen change if the slit width is doubled?
a. It will become four times as large.
b. It will double.
c. It will be cut in half.
d. It will become eight times as large.
e. It will be cut to one-quarter its original size.

Answers

Answer:

c : it wil be cut in half.

The pattern is formed on a distant screen so we can use the Fraunhofer difracction for a single slit. The formula of the width of the central bright spot is given by Δx = (2λz)/a, where λ is the wavelength and a is the width of the slit. So if the inicial width (a_1) is doubled (a_2= 2 x a_1),the width of the central spot will be cut in half Δx = (2λz)/a_2 = (2λz)/2xa_1 .

how much is need to lift a load of 100n placed at a distance of 29 cm from fulcrum if effort is applied at 60cm from the fulcrum on opposite side of the load? calculate mechanical advantage and velocity ratio of the lever​

Answers

Answer:

206.8965517 n

Explanation:

First, we need to see that 60:29 is 2.078965517:1. Then we need to multiply the energy put 29 cm from the fulcrum by 2.078965517, giving us the end result of our answer.

1 of 3 : please help got an extra day for a test and i don’t get this (must show work) points and brainliest!

Answers

Answer:

y = 1/2at^2

we could also write it as-

y = (at^2)/2

2y = at^2

2y/a = t^2

√2y/a = t

hope it helps

A force of 16.88 N is applied tangentially to a wheel of radius 0.340 m and gives rise to an angular acceleration of 1.20rad / (s ^ 2) . Calculate the rotational inertia of the wheel. A. 2.77 kg - m ^ 2 B. 0.73 kg - m ^ 2 C. 4.41 kg - m ^ 2 O. 4.78 kg - m ^ 2

Answers

Given.

force = 16.88 N is

radius = 0.340m

an angular acceleration = 1.20rad/s^2

the formula for torque is

F*r = I*a

where I is moment of inertia

16.88*.34 = I*1.2

I = 4.78Kg-m^2

so rotational inertia I = 4.78Kg-m^2

Two infinitely long parallel wires carry current in opposite directions. Wire 1 has current 15.0 A and wire 2 has current 19.9 A. If they are separated by a distance 4.3 m, at what location between the wires is the net magnetic field be twice the strength of the magnetic field from wire 1

Answers

Answer:

x= 2*I1*d/(I1+I2) meter

1.2miles=__________km

Answers

Answer:

1.931 kilometres is the answer of 1.2 miles

Answer and Explanation:

1 mile = 1.609 km

Set up a fraction to cancel the miles to get the kilometers.

[tex]\frac{1.2mi}{?km} *\frac{1.609}{1mi} = 1.9308km[/tex] <- This is the answer.

#teamtrees #PAW (Plant And Water)

the 2kg block slids down a firctionless curved ramp starting from rest at heiht of 3m what is the speed of the block at the bottemvof the ramp​

Answers

A

Explanation:

1qdeeeeeeeeeeehhhhhhhhhwilffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff.

Other Questions
What are the characteristics of gingivitis? if any 1 studying 11th can u plz send me the chemistry notes for chapter 2 STRUCTURE OF AN ATOM lesson plz send me honestly cause i have exam day after tommorow .so plz send unwanted answer I BEG U can you solve this. I need it. :) :):) Legislative BranchBranchFacts:Responsibilities:Facts:DResponsibilities:EheBBranches of theU.S. GovernmentFBranchFacts: GResponsibilitiesH 2011 FLVSWhich of the following could be placed in the area labeled A? The economy in the New England colonies was based on 55. (a) If alpha and beta are the roots of the equation xsquare+ px+q=0 and beta>alpha find the square of thedifference of the roots in terms of p and q. please help me i have a couple mins the majority of the body consists of ______ such as muscle, bone, and body organs d) choose any technical prosession List out technology and technicans involved in that Prosession. Also, write down points related to the importance of that profession: 9) Given a circle with radius = 6 meters, a central angle of 77 degrees will intercept an arc of what length?Please show all work identify an organization that does community work to support it HIV, Herpes ch Name the disease which makes the excreation of thick White of Light Yellow pus along with urine. ACD = 30, Line segment AC = x + 1, Line segment CD = 2x + 2. What is x equal to? x = Can someone help me on these ones. PLEASE HELP ME !! Bond A is zero-coupon bond paying $100 one year from now. Bond B is a zero-coupon bond paying $100 two years from now. Bond C is a 10% coupon bond that pays $10 one year from now and $10 plus the $100 principal two years from now. The yield to maturity on bond A is 10%, and the price of bond B is $84.18. Assuming annual compounding, what is the price of Bond A? What are m and b in the linear equation, using the common meanings of m and b? 2 + 3x + 5 - 2x = y explain five features of the colonial nigeria constitution Some help-seeking behaviors that students who possess interdependenceincorporate include seeking help in the form of Show all work to solve the equation for x. If a solution is extraneous, be sure to identify it in your final answer.Square root x + 6 - 4 = x Question 22 of 25Use completing the square to solve this quadratic equation.Check all that apply.X^2-10x+25=2