A 43-kg child sits in a massless swing. With what horizontal force must the seat be pulled so that the ropes form an angle of 35o with respect to the vertical

Answer:

The laws of liquid pressure are: ... The liquid pressure at a point inside the liquid is same in all directions. The liquid pressure at a point inside the liquid is directly proportional to the depth of that point from the free surface of liquid. The pressure of liquid at same depth is different for different liquids

Answer:

The laws of liquid pressure:

The pressure that is inside the liquid rises with the intensity from the surface of a liquid.

The term fluid:

Fluid is basically liquid and a substance that is known to have no certain shape. The opposite of the term fluid would be solid.

Answer:

D. 25 / π Spiral / m

Explanation:

Given;

current, I = 5 A

magnetic field strength, B = 50 μT = 50 x 10⁻⁶ T

The magnetic field strength is given as;

[tex]B = \mu_0 nI\\\\where;\\\\\mu_0 \ is \ permeability \ of \ free \ space = 4\pi \times 10^{-7} T/A.m\\\\n \ is \ the \ number \ of \ spirals \ per \ length\\\\n = \frac{B}{\mu_0 I} = \frac{50 \times 10^{-6}}{5\times 4\pi \times 10^{-7}} = \frac{25}{\pi } \ spirals /m \\\\[/tex]

Therefore, the correct option is D. 25 / π Spiral / m

Answer:

Part 1

20 N

Part 2

0.4 m/s²

Part 3

4 m/s

Explanation:

The force which pulls the sled right = 50 N

The friction force exterted towards left by the snow = -30 N

The mass of the sled = 50 kg

Part 1

The sum of the forces on the sled, F = 50 N + (-30) N = 20 N

Part 2

The acceleration of the sled is given as follows;

F = m·a

Where;

m = The mass of the sled

a = The accelertion

a = F/m

∴ a = (20 N)/(50 kg) = 0.4 m/s²

The acceleration of the sled, a = 0.4 m/s²

Part 3

The initial velocity of the sled, u = 2 m/s

The kinematic equation of motion to determine the speed of the sled is v = u + a·t

The speed, v, of the sled after t = 5 seconds is therefore;

v = 2 m/s + 0.4 m/s² × 5 s = 4 m/s.

Answer:

18 Nm

Explanation:

if the correct answer

Answer:

I_syst = 278.41477 kg.m²

Explanation:

Mass of platform; m1 = 117 kg

Radius; r = 1.61 m

Moment of inertia here is;

I1 = m1•r²/2

I1 = 117 × 1.61²/2

I1 = 151.63785 kg.m²

Mass of person; m2 = 62.5 kg

Distance of person from centre; r = 1.05 m

Moment of inertia here is;

I2 = m2•r²

I2 = 62.5 × 1.05²

I2 = 68.90625 kg.m²

Mass of dog; m3 = 28.3 kg

Distance of Dog from centre; r = 1.43 m

I3 = 28.3 × 1.43²

I3 = 57.87067 kg.m²

Thus,moment of inertia of the system;

I_syst = I1 + I2 + I3

I_syst = 151.63785 + 68.90625 + 57.87067

I_syst = 278.41477 kg.m²

Answer:

Distance cover in 2  hour = 6 kilometer

Explanation:

Given equation:

x = 2t - 10

where

x = kilometer

t = hour

Find:

Distance cover in 2  hour

Computation:

T = 2

So,

x = 2t - 10

x = 2(2) - 10

x = 4 - 10

x = -6

Distance cover in 2  hour = 6 kilometer

Answer:

The distance is 6 km.

Explanation:

The equation of uniform linear motion of a particle has the form: x = 2t – 10. (x: km, t: h). What is the distance traveled by the particle after 2 hours?

x = 2t - 10

distance traveled after t = 2 hours

Substitute t = 2 in the given expression

x = 2 x 2 - 10

x = 4 - 10

x = - 6 km

So, the distance is 6 km.

perpose of lab is to store apparatus and do some experiment

Helps someone to know the exert lengh of something

Answer:

θ = 66º

Explanation:

This exercise of Newton's second law must be solved in part, let's start by finding the slowing down acceleration of the ball

           a = v² / r

the radius of the circle is

          sin θ = r / L

          r = L sin θ

we substitute

          a = v² /L sin θ

now let's write Newton's second law

vertical axis

            T_y -W = 0

             T_y = W

radial axis

            Tₓ = m a                 (1)

let's use trigonometry for the components of the string tension

             cos θ = T_y / T

             sin θ = Tₓ / T

             Tₓ = T sin θ

we substitute in 1

            T sin θ = [tex]\frac{m \ v^2}{L \ sin \theta}[/tex]

             T L sin² θ = m v²

we write our system of equations

             T cos θ  = m g

             T L sin ² tea = m v²

we divide the two equations

             L [tex]\frac{sin^2 \theta}{cos \theta}[/tex] = v² / g

             (1 -cos²)/ cos θ  = [tex]\frac{v^2 }{g \ L}[/tex]

             1 - cos² θ  =  [tex]\frac{4.75^2}{9.81 \ 2.37}[/tex]   cos θ

             cos² θ + 0.97044 cos θ -1   = 0

we change variable    cos  θ = x

             x² + 0.97044 x - 1 =0

             x= [tex]\frac{-0.97 \pm \sqrt{0.97^2 - 4 1} }{2}[/tex]

           since the square root is imaginary there is no real solution to the problem, suppose that the radius is 1 m r = 1 m

           T sin θ = [tex]\frac{m \ v^2}{ r}[/tex]

           T cos θ  = m g

resolved

           tan θ =  [tex]\frac{v^2}{ r g}[/tex]

           θ = tan⁻¹ ( 4.75²/ 1 9.81)

           θ = 66º

Answer:

A concave mirror, or converging mirror, has a reflecting surface that is recessed inward (away from the incident light). Concave mirrors reflect light inward to one focal point. They are used to focus light.

Answer:

Explanation: The voltage or potential difference between two points is defined to be the change in ... I = qnAv relates the drift velocity to the current

Answer:

The induced current direction as viewed is clockwise

Explanation:

Lenz's Law states that the induced e. m. f. causes current to be driven in the loop of wire in such a way as to generate magnetic field that are oppose the magnetic flux change which is the source of the induced current

Therefore, as the magnet approaches the coil with the south pole,  the coil produces current equivalent to the upward movement of the south pole of a permanent magnet through it which according to Flemings Right Hand Rule is clockwise

Therefore;

The direction of the induced current in the loop (as viewed from above, looking down the magnet) is clockwise

Answer:

H + H ------> He + energy. He + He -----> H + H + He.

Explanation:

Hydrogen having one proton and no neutron fuse with hydrogen having one proton and one neutron forming helium atom with the release of photon. After that two helium atoms combine together forming two hydrogen atoms having one proton each whereas one helium atom having two protons and two neutrons present in their nucleus so the end product of this reaction is hydrogen atoms and helium.

Answer:

as it hits the ground it's dispersed and this causes it to move in different directions

Answer:

The gravitational force between m₁ and m₂, is approximately 1.06789 × 10⁻⁶ N

Explanation:

The details of the given masses having gravitational attractive force between them are;

m₁ = 20 kg, r₁ = 10 cm = 0.1 m, m₂ = 50 kg, and r₂ = 15 cm = 0.15 m

The gravitational force between m₁ and m₂ is given by Newton's Law of gravitation as follows;

[tex]F =G \cdot \dfrac{m_{1} \cdot m_{2}}{r^{2}}[/tex]

Where;

F = The gravitational force between m₁ and m₂

G = The universal gravitational constant = 6.67430 × 10⁻¹¹ N·m²/kg²

r₂ = 0.1 m + 0.15 m = 0.25 m

Therefore, we have;

[tex]F = 6.67430 \times 10^{-11} \ N \cdot m^2/kg \times \dfrac{20 \ kg\times 50 \ kg}{(0.1 \ m+ 0.15 \ m)^{2}} \approx 1.06789 \times 10^{-6} \ N[/tex]

The gravitational force between m₁ and m₂, F ≈ 1.06789 × 10⁻⁶ N

Total distance = 10 km + 10 km = 20 km

1 km = 1000 m

20km x 1000 = 20,000 m

Total time = 20 min. + 30 min. = 50 minutes

Average speed = Distance /  time

Average speed = 20,000/50 min

Average speed = 400 m/s

Answer:

2.5 m

Explanation:

Potential energy is the energy stored in an object as a result of its position relative to other objects

The change in potential energy is given by:

ΔPE = mgh;

where ΔPE is the change in potential energy, m is the mass if the object, g is the acceleration due to gravity and h is the change in height of the object.

Hence given that g = 10 m/s², ΔPE = 150 J, m = 6 kg, hence:

ΔPE = mgh

150 = 6 * 10 * h

150 = 60h

h = 2.5 m

Hence the change in height is 2.5 m

Explanation:

(b) A uniform beam 150cm long weighs 3.5kg and

supported on knife-edges at its ends. The beam

supports a weight 7kg at a distance 30cm from

one end. Find the reactions of the supports.

Answer:

vf²=vi²+2a∆x

Explanation:

The third equation of motion gives the final velocity of an object under uniform acceleration given the distance traveled and an initial velocity: v 2 = v 0 2 + 2 a d . v^2=v_0^2+2ad. v2=v02+2ad. The graph of the motion of the object.

Answer:

v = 50.5 m/s

Explanation:

F = (m)(^v/^t)

115N = (0.04551kg)(v/(0.020s))

2,526.917161 m/s² = v/(0.020s)

v = 50.53834322 m/s

v = 50.5 m/s

Answer:

Preface to Students: Welcome to Physics! iv. 1 Motion. 1. 1-1 Speed, Velocity, and. Acceleration. 1. 1-2 Free Fall. 8. 2 Vectors and Projectiles.

257 pages·3 MB

Explanation: I hope this helpssss!!!

Answer:

A) I_laser = 70.74 W/m²

B) I_bulb = 1.989 W/m²

C) it is not advisable to look at the laser beam directly.

Explanation:

We are given;

Power; P = 0.50 mW = 0.5 × 10^(-3) W

Diameter; d = 3 mm = 0.003 m

Radius; r = d/2 = 0.003/2 = 0.0015 m

A) Area of beam; A = πr²

A = 0.0015²π

Now, formula for average intensity is;

I = P/A

I = (0.5 × 10^(-3))/0.0015²π

I = 70.74 W/m²

B) We are told to find the intensity of a lightbulb producing 100-W.

Thus, P = 100 W

A light bulb is spherical in shape. Thus;

Area; A = 4πr²

We are told it's 2 m away.

Thus; r = 2 m

A = 4π(2)²

A = 16π

Thus, I = P/A = 100/16π

I = 1.989 W/m²

C) The intensity of the laser beam is far greater than that of the light bulb. Thus, it is not advisable to look at the laser beam directly.

Explanation:

light travel slower in daimond

Answer:

The force is 3305.6 N.

Explanation:

Final velocity, v = 0

time, t = 2.25 ms

initial velocity, u = 4.25 m/s

mass, m = 1.75 kg

Let the acceleration is a.

Use first equation of motion.

v = u + a t

0 = 4.25 + a x 0.00225

a = - 1888.9 m/s^2

The force is

F = ma

F = 1.75 x 1888.9

F = 3305.6 N

Option ( iv ) is the correct answer.

A vector quantity the physical quantity that has both direction as well as magnitude.

A forest ecosystem describes the community of plants, animals, microbes and all other organisms in interaction with the chemical and physical features of their environment: Specifically, a terrestrial environment dominated by trees growing in a closed canopy — a forest, in other words.

Hope this helps you buddy! :)

The term used to describe the turning force exerted when pushing an object is effort.

The is the input force or force applied at one point of a lever in order to overcome a load.

The relationship between effort, load and mechanical advantage of a lever is given as;

M.A = L/E

where;

Thus, the term used to describe the turning force exerted when pushing an object is effort.

Learn more about effort here: https://brainly.com/question/24237657

Answer

I am not sure but it is may be 50J

I hope that's, this answer is fine.