Answer:
p = 60.6N*s
Explanation:
v_f = v_0+a*t
a = (v_f-v_0)/t
a = (1.8m/s)/2.35s
a = 0.77m/s²
F = m*a
F = (25kg+8.5kg)*0.77m/s²
F = 25.8N
^p = F*t
p = 25.8N*2.35s
p = 60.6N*s
A racing car going a 20 m/s stops in a distance of 20 m.What is its acceleration?
step by step
formular v^2 = u^2+2as
stop v = 0
0 = 400+2a(20)
-400=40a
a = -10 m/s^2
ans affect acceleration is 10 m/s^2
A uniform cylinder of mass 1.5 kg and radius 0.3 m rolls down a ramp inclined at an angle 0.12 radians to the horizontal. What is the acceleration of the cylinder in m/s2
Answer:
different crystals from 6 to the point of the day I am not sure if you are aware of this but I am not sure if you are aware of this but I am not sure if you have any idea of how 3 is going to be able or not 2 3 or even if you have a good day or two to get to know you a 3 of a good place To Go for your own business or business 5 52 you are a great 49,494 548 4.If a wave has speed of 235 m/s with a wavelength of 3 m, what is the frequency of the wave?
Dharna is said to be concentration it is true or false
dharna is said to be concentration.. it is true
what is liquid pressure and its si unit?
The SI unit of pressure is the pascal: 1Pa=1N/m2 1 Pa = 1 N/m 2 . Pressure due to the weight of a liquid of constant density is given by p=ρgh p = ρ g h , where p is the pressure, h is the depth of the liquid, ρ is the density of the liquid, and g is the acceleration due to gravity.
What particles in an atom can increase and decrease in number without changing the identity of the elements
Answer:
The number of neutrons or electrons in an atom can change without changing the identity of the element.
A ball is thrown from the ground with velocity of 30m/s after what time has the ball has velocity of 10m/s down ward?
a ball is thrown vertically upward from the ground with the velocity of 30m/s. a) how long will it take to rise to its highest poitn? b) how high does the ball rise? c) how long after projection will the ball have a velocity of 10m/s? d) what is the total time of flight?
From Vf = Vo - gt, 0 = 30 - 9.8t yielding t = 3.06 sec.
From h = Vo(t) - g(t^2)/2, h = 30(3.06) - 4.9(3.06)^2 yielding h = 45.88m.
From Vn = Vo - gt, 20 - 9.8t yielding t = 2.04 sec.
Since the fall time equals the rise time, the total flight time is 2(3.06) = 6.12 sec.
A positron is a particle that has the same mass but opposite charge of an electron. An electron and a positron are shot directly toward each other by a particle accelerator. They start very far from each other, each with a kinetic energy of
Complete Question
The Complete Question is Attached below
Answer:
[tex]E_t=2.14*10^{-13}J[/tex]
Explanation:
From the question we are told that:
Kinetic energy [tex]K.E=5*10^{-14}[/tex]
Generally, the equation for Total Energy is mathematically given by
[tex]E_t=K.E+2me[/tex]
Where
Mass of an electron in MeV
[tex]m=0.510 998 950 00 MeV[/tex]
And
Electron Charge
[tex]1.6 * 10^{-19}[/tex]
Therefore
[tex]E_t=K.E+2me[/tex]
[tex]E_t=5*10^{-14}*0.510 998 950 00*1.6 * 10^{-19}[/tex]
[tex]E_t=2.14*10^{-13}J[/tex]
Which questions would a biopsychologist most likely address when studying depression?
A bio psychologist would address questions on stress, abuse and conflict when studying depression.
A bio psychologist is a person that is involved in the study of the brain and peoples behavior. This person tries to understand why people do the things or act the way they do using a biological and psychological approach.
While trying to understand the cause of this depression, the bio psychologist would
ask to know if the subject is undergoing stressful situationsIf an abuse led to the situation. It could be physical, emotional or mental abuse. Another question would be if a conflict or altercation caused it.read more on
https://brainly.com/question/17343378?referrer=searchResults
uniform ladder of length 6.0 m and weight 300 N leans against a frictionless vertical wall. The foot of the ladder isplaced 3.0 m from the base of the wall. What must be the magnitude of the force of static friction supplied by the floorto keep the ladder from slipping
Answer:
Fx1 (6 m) sin 60 = 300 (3 m) cos 60 balancing torques about floor
Fx1 = 900 * 1/2 / 5.20 = 86.6 N this is the horizontal force that must be supplied by the wall to balance torques about the floor
This is also equal to the static force of friction that must be applied at the point of contact with the floor to balance forces in the x-direction.
Fx1 = Fx2 = 86.6 N
A projectile is fired into the air from the top of a 200-m cliff above a valley as shown below. Its initial velocity is 60 m/s at 60° above the horizontal. Calculate (a) the maximum height, (b) the time required to reach its highest point, (c) the total time of flight, (d) the components of its velocity just before striking the ground, and (e) the horizontal distance traveled from the base of the cliff.
a) y(max) = 337.76 m
b) t₁ = 5.30 s the time for y maximum
c)t₂ = 13.60 s time for y = 0 time when the fly finish
d) vₓ = 30 m/s vy = - 81.32 m/s
e)x = 408 m
Equations for projectile motion:
v₀ₓ = v₀ * cosα v₀ₓ = 60*(1/2) v₀ₓ = 30 m/s ( constant )
v₀y = v₀ * sinα v₀y = 60*(√3/2) v₀y = 30*√3 m/s
a) Maximum height:
The following equation describes the motion in y coordinates
y = y₀ + v₀y*t - (1/2)*g*t² (1)
To find h(max), we need to calculate t₁ ( time for h maximum)
we take derivative on both sides of the equation
dy/dt = v₀y - g*t
dy/dt = 0 v₀y - g*t₁ = 0 t₁ = v₀y/g
v₀y = 60*sin60° = 60*√3/2 = 30*√3
g = 9.8 m/s²
t₁ = 5.30 s the time for y maximum
And y maximum is obtained from the substitution of t₁ in equation (1)
y (max) = 200 + 30*√3 * (5.30) - (1/2)*9.8*(5.3)²
y (max) = 200 + 275.40 - 137.64
y(max) = 337.76 m
Total time of flying (t₂) is when coordinate y = 0
y = 0 = y₀ + v₀y*t₂ - (1/2)* g*t₂²
0 = 200 + 30*√3*t₂ - 4.9*t₂² 4.9 t₂² - 51.96*t₂ - 200 = 0
The above equation is a second-degree equation, solving for t₂
t = [51.96 ±√ (51.96)² + 4*4.9*200]/9.8
t = [51.96 ±√2700 + 3920]/9.8
t = [51.96 ± 81.36]/9.8
t = 51.96 - 81.36)/9.8 we dismiss this solution ( negative time)
t₂ = 13.60 s time for y = 0 time when the fly finish
The components of the velocity just before striking the ground are:
vₓ = v₀ *cos60° vₓ = 30 m/s as we said before v₀ₓ is constant
vy = v₀y - g *t vy = 30*√3 - 9.8 * (13.60)
vy = 51.96 - 133.28 vy = - 81.32 m/s
The sign minus means that vy change direction
Finally the horizontal distance is:
x = vₓ * t
x = 30 * 13.60 m
x = 408 m
Given the solution [tex]y_{1}(x)[/tex] from EDO below, develop a second solution.
[tex]x\frac{d^{2}y }{dx^{2} } +3\frac{dy}{dx} -y=0,\\y_{1} (x)=1+\frac{x}{3} +\frac{x^{2} }{24} +\frac{x^{3} }{360} + ...[/tex]
We're given
[tex]\displaystyle y_1(x) = 1 + \frac x3 + \frac{x^2}{24} + \frac{x^3}{360} + \cdots = \sum_{n=0}^\infty a_nx^n[/tex]
so let's see if we can find a closed form for the n-th term's coefficient.
Notice that
[tex]\displaystyle a_0 = 1 \\\\ a_1 = \frac13 = \frac1{1\times3} \\\\ a_2 = \frac1{24} = \frac1{(1\times3) \times (2\times4)} \\\\ a_3 = \frac1{360} = \frac1{(1\times3) \times (2\times4) \times (3\times5)}[/tex]
If the pattern continues, the next few terms are likely
[tex]\displaystyle a_4 = \frac1{8640} = \frac1{(1\times3) \times (2\times4) \times (3\times5) \times (4\times6)} \\\\ a_5 = \frac1{302400} = \frac1{(1\times3) \times (2\times4) \times (3\times5) \times (4\times6) \times (5\times7)} \\\\ a_6 = \frac1{14515200} = \frac1{(1\times3) \times (2\times4) \times (3\times5) \times (4\times6) \times (5\times7) \times (6\times8)}[/tex]
which leads up to the n-th term,
[tex]\displaystyle a_n = \frac1{(1\times3) \times (2\times4) \times \cdots \times (n\times(n+2))} = \frac2{n!(n+2)!}[/tex]
where the numerator is multiplied by 2 in order to "complete" the factorial pattern in (n + 2)!.
So we have
[tex]\displaystyle y_1(x) = \sum_{n=0}^\infty \frac2{n!(n+2)!} x^n[/tex]
Now we use reduction of order to find a linearly independent solution of the form [tex]y_2(x) = v(x)y_1(x)[/tex], with derivatives
[tex]\displaystyle \frac{\mathrm dy_2}{\mathrm dx} = v(x) \frac{\mathrm dy_1}{\mathrm dx} + y_1(x) \frac{\mathrm dv}{\mathrm dx} \\\\ \frac{\mathrm d^2y_2}{\mathrm dx^2} = v(x) \frac{\mathrm d^2y_1}{\mathrm dx} + 2 \frac{\mathrm dv}{\mathrm dx} \frac{\mathrm dy_1}{\mathrm dx} + y_1(x) \frac{\mathrm d^2v}{\mathrm dx^2}[/tex]
Substitute [tex]y_2[/tex] and its derivatives into the DE, and simplify the resulting expression to get a DE in terms of v(x) :
[tex]\displaystyle x y_1 \frac{\mathrm d^2v}{\mathrm dx^2} + \left(2x\frac{\mathrm dy_1}{\mathrm dx}+3y_1\right)\frac{\mathrm dv}{\mathrm dx} + \left(x\frac{\mathrm d^2y_1}{\mathrm dx^2}+3\frac{\mathrm dy_1}{\mathrm dx}-y_1\right)v = 0[/tex]
but since we know [tex]y_1(x)[/tex] satisfies the original DE, the last term vanishes and we're left with
[tex]\displaystyle x y_1 \frac{\mathrm d^2v}{\mathrm dx^2} + \left(2x\frac{\mathrm dy_1}{\mathrm dx}+3y_1\right)\frac{\mathrm dv}{\mathrm dx} = 0[/tex]
Reduce the order by substituting [tex]w(x)=\dfrac{\mathrm dv}{\mathrm dx}[/tex] to get yet another DE in w(x) :
[tex]\displaystyle x y_1 \frac{\mathrm dw}{\mathrm dx} + \left(2x\frac{\mathrm dy_1}{\mathrm dx}+3y_1\right)w = 0[/tex]
This equation is separable:
[tex]\displaystyle \frac{\mathrm dw}w = - \frac{2x\frac{\mathrm dy_1}{\mathrm dx}+3y_1}{xy_1}\,\mathrm dx \\\\ \frac{\mathrm dw}w = -\left(\frac2{y_1}\frac{\mathrm dy_1}{\mathrm dx} + \frac3x\right)\,\mathrm dx[/tex]
From here you would integrate to solve for w(x), then integrate again to solve for v(x), and finally for [tex]y_2(x)[/tex] by multiplying [tex]y_1(x)[/tex] by v(x). Using the fundamental theorem of calculus, you would find
[tex]\displaystyle \ln|w| = -2 \int_1^x \frac{{y_1}'(\xi)}{y_1(\xi)}\,\mathrm d\xi - 3\ln|x| + C_1 \\\\ w = \frac{C_1}{x^3} \exp\left(-2 \int_1^x \frac{{y_1}'(\xi)}{y_1(\xi)} \,\mathrm d\xi\right)\right) \\\\ v = C_1 \int_1^x \frac1{\omega^3} \exp\left(-2 \int_1^\omega \frac{{y_1}'(\xi)}{y_1(\xi)}\,\mathrm d\xi\right) \,\mathrm d\omega + C_2[/tex]
so that you end up with
[tex]\displaystyle y_2(x) = C_1 y_1(x) \int_1^x \frac1{\omega^3} \exp\left(-2 \int_1^\omega \frac{{y_1}'(\xi)}{y_1(\xi)}\,\mathrm d\xi\right) \,\mathrm d\omega + C_2y_1(x)[/tex]
But the second term is already accounted for by [tex]y_1(x)[/tex] itself, so the second solution is
[tex]\displaystyle y_2(x) = \boxed{y_1(x) \int_1^x \frac1{\omega^3} \exp\left(-2 \int_1^\omega \frac{{y_1}'(\xi)}{y_1(\xi)}\,\mathrm d\xi\right) \,\mathrm d\omega}[/tex]
You could go the extra mile and try to find a power series expression for this solution, but that's a lot of work for little payoff IMO.
I only need help with e (bottom of the page).
Explanation:
The box is accelerating along the y-axis at a rate of [tex]+2.5\:\text{m/s}^2[/tex] as well as along the x-axis at a rate of [tex]+5.1\:\text{m/s}^2.[/tex] So the magnitude of the box's total acceleration is given by
[tex]a_T = \sqrt{a_x^2 + a_y^2}[/tex]
[tex]\:\:\:\:= \sqrt{(5.1\:\text{m/s}^2)^2 + (2.5\:\text{m/s}^2)^2}[/tex]
[tex]\:\:\:\:=5.7\:\text{m/s}^2[/tex]
The direction of the acceleration [tex]\theta[/tex] with respect to the horizontal direction is given by
[tex]\theta = \tan^{-1}\!\left(\dfrac{a_y}{a_x}\right) = \tan^{-1}\!\left(\dfrac{2.5\:\text{m/s}^2}{5.1\:\text{m/s}^2}\right)[/tex]
[tex]\:\:\:\:= 26.1°[/tex]
two object A and B vertically thrown upward with velocities of 80m/s and 100m/s at two seconds interview where and when will the two object meet.
Answer:
THIS IS YOUR ANSWER:
☺✍️HOPE IT HELPS YOU ✍️☺
2- A student ran 135 meters in 15 seconds. What was the student's velocity?
*
7.5 m/s
9 m/s
12 m/s
15 m/s
Answer:
9 Brainly hahaha ............huh
potential diffetence
Answer:
6v
Explanation:
V=IR
V= 2* 3
V= 6 volts
There was a major collision of an asteroid with the Moon in medieval times. It was described by monks at Canterbury Cathedral in England as a red glow on and around the Moon. How long after the asteroid hit the Moon, which is 3.84 x 10^5 km away, would the light first arrive on Earth?
Answer:
c = 3.00E108 m/s = 3.00E5 km/s
t = S / v = 3.84E5 / 3.00E5 = 1.28 sec
A steel cable with Cross Sectional Area 3.00cm² has an elastic limit of 2.40 x 10^8pascals. Find the maximum upward acceleration that can be given a 1200kg elevated supported by the cable if the stress is not to exceed one-third of the elastic limit.
Answer:
Stress = F / A force per unit area
A = 3.00 cm^2 = 3 E-4 m^2
F = 2.4E8 N/m^2 * 3E-4 m^2 = 7.2E4 N max force applied
F/3 = 2.4E4 N if force not to exceed limit (= f)
f = M a
a = 2.4 E4 N / 1.2 E3 kg = 20 m / s^2 about 2 g
Ibrah open a bottle of perfume infront of the room. After few minutes the smell of perfume reach the whole room. Explain why this happens
Find the acceleration of the blocks when the system is released. The coefficient of kinetic friction is 0.4, and the mass of each block is 1 kg. Neglect the mass of the pulleys and cord.
Answer:
a = 4.9(1 - sinθ - 0.4cosθ)
Explanation:
Really not possible without a complete setup.
I will ASSUME that this an Atwood machine with two masses (m) connected by an ideal rope passing over an ideal pulley. One mass hangs freely and the other is on a slope of angle θ to the horizontal with coefficient of friction μ. Gravity is g
F = ma
mg - mgsinθ - μmgcosθ = (m + m)a
mg(1 - sinθ - μcosθ) = 2ma
½g(1 - sinθ - μcosθ) = a
maximum acceleration is about 2.94 m/s² when θ = 0
acceleration will be zero when θ is greater than about 46.4°
what is angular frequency
An organ pipe of length 3.0 m has one end closed. The longest and next-longest possible wavelengths for standing waves inside the pipe are
Answer:
The longest wavelength for closed at one end and open at the other is
y / 4 where y is the wavelength - that is node - antinode
The next possible wavelength is 3 y / 4 - node - antinode - node -antinode
y / 4 = 3 m y = 12 meters the longest wavelength
3 y / 4 = 3 m y = 4 meters 1 / 3 times as long
Do you believe in ghost
Answer:
well its about our thinking but i do believe in ghost a little
When the drag force on an object falling through the air equals the force of gravity, the object has reached
terminal force.
terminal acceleration,
terminal illness.
terminal velocity
A tuning fork with a frequency of 335 Hz and a tuning fork of unknown frequency produce beats with a frequency of 5.3 when struck at the same time. A small piece of putty is placed on the tuning fork with the known frequency and it's frequency is lowered slightly. When struck at the same time, the two forks now produce a beat frequency of 8 Hz. 1)What is frequency of tuning fork which originally had a frequency of 335 Hz after the putty has been placed on it
Answer:
Explanation:
Unknown fork frequency is either
335 + 5.3 = 340.3 Hz
or
335 - 5.3 = 329.7 Hz
After we modify the known fork, the unknown fork frequency equation becomes either
(335 - x) + 8 = 340.3
(335 - x) = 332.3
x = 2.7 Hz
or
(335 - x) + 8 = 329.7
(335 - x) = 321.7
x = 13.3 Hz
IF the unknown fork frequency was 340.3 Hz,
THEN the 335 Hz fork was detuned to 335 - 2.7 = 332.3 Hz
IF the unknown fork frequency was 329.7 Hz,
THEN the 335 Hz fork was detuned to 335 - 13.3 = 321.7 Hz
No matter how far you stands from a mirror your image appear errect .the mirror is
Answer:
convex mirror
.....................
Answer:
convex mirror..........
a concave mirror has a radius of curvature of 60cm. How close to the mirror should an object be placed so that the rays travel parallel to each other after reflection
Answer:
Answer:30 cm
Answer:30 cmExplanation:
Answer:30 cmExplanation:Given=ROC= 60cm
Answer:30 cmExplanation:Given=ROC= 60cmObject be placed so that the rays that came from the object to them mirror are reflected from the mirror, and, then travel parallel to each other= 30cm at focus.
A circular loop of wire is in the plane of the paper. The south pole of a bar magnet is being moved from a position in front of the paper in a direction away from the center of the loop. The direction of the induced current in the loop. Which is the direction of the induced current in the loop?
Answer:
Counterclockwise
explanation in attachment
if an object weighs 550 n and the area is 1 cube
a beam of light converging to the point of 10 cm is incident on the lens. find the position of the point image if the lens has a focal length of 40 cm
Answer:
beam of light converges to a point A. A lens is placed in the path of the convergent beam 12 cm from P.
To find the point at which the beam converge if the lens is (a) a convex lens of focal length 20 cm, (b) a concave lens of focal length 16 cm
Solution:
As per the given criteria,
the the object is virtual and the image is real (as the lens is placed in the path of the convergent beam)
(a) lens is a convex lens with
focal length, f=20cm
object distance, u=12cm
applying the lens formula, we get
f
1
=
v
1
−
u
1
⟹
v
1
=
f
1
+
u
1
⟹
v
1
=
20
1
+
12
1
⟹
v
1
=
60
3+5
⟹v=7.5cm
Hence the image formed is real, at 7.5cm from the lens on its right side.
(b) lens is a concave lens with
focal length, f=−16cm
object distance, 12cm
applying the lens formula, we get
f
1
=
v
1
−
u
1
⟹
v
1
=
f
1
+
u
1
⟹
v
1
=
−16
1
+
12
1
⟹
v
1
=
48
−3+4
⟹v=48m
Hence the image formed is real, at 48 cm from the lens on the right side.
