Answer:
A body becomes weightless in a zero-gravity scenario and when a force is applied to a body that is equal and opposite to the force of gravity. If the body is falling only under the influence of gravity.
Answer:
A body becomes weightless in a zero-gravity scenario and when a force is applied to a body that is equal and opposite to the force of gravity.If the body is falling only under the influence of gravity.
Which of the following is an example of a chemical change?
A. Sugar breaking down into water and carbon when it is heated
B. A sugar cube being crushed by a spoon
C. Sugar mixing with red food coloring and forming a red solid
D. A sugar cube dissolving in water as the water is stirred
Answer:
I think its sugar breaking down into watee and carbon when it is heated
I HOPE ITS RIGHT IF NOT THEN SORRYHAVE A GREAT DAY :)
solubility of sodium chloride in water at 27 degree celsius is 22.7 in hundred ml of water the density of water is 1.0 gram per ml calculate the concentration of sodium chloride in term of mass percentage when dissolved in 500 ml of water
please tell me correct answer with solution
Answer:
of what grade it is of??
Explanation:
tell me then ill answer
One the first chemistry test. 12 students got As, 18 students got Bs, and 20 students got Cs.
a. What is the percentage of students received Bs.
b. What is the percentage of students who received Cs?
Express your answer to the ones place.
Answer:
A. 36 percent recieved Bs
B. 40 percent of students received Cs
Explanation:
Amount of students: 12+18+20=50
Students with Bs: (18÷50) x 100 = 36%
Students with C's: (20÷50) x100 = 40%
On the first chemistry test 12 students got A, 18 students got B, and 20 student got C. Thus the percentage of students received B is 0.36 and percentage of students received c is 0.40
What is the percentage of students received B and C?In mathematics, a number or ratio expressed as a fraction of 100. It is often denoted using the percent sign %. A percentage is a dimension less unit and it has no unit.
In above question 12 student got A, 18 student got B, and 20 student got C.
So total number of student = 12 + 18 + 20 = 50.
Then the percentage of students received B is as follows:-
Percentage of students who got B = (student who got B/Total number of student) X 100.
=(18/50) X 100
= 36%
Now percentage of students who got C = (No of students who got C/Total students)X100
=(20/50) X 100
=40%.
Therefore,On the first chemistry test 12 students got A, 18 students got B, and 20 student got C. Thus the percentage of students received B is 0.36 and percentage of students received c is 0.40 percentage of students who got B is 36% and percentage of students who got C is 40%
Learn more about percentage here:
https://brainly.com/question/28269290
#SPJ2
can you solve this.
I need it.
:) :):)
Answer:
12
45
ahagosmssjajjapaps3
write its IUPAC name?
Answer:
Hello
please make sure that there is any group which is join with alkane
Hydrogen and oxygen combine in
the ratio of 1:8 by mass to form
water. What mass of oxygen gas
would be required to react
completely with 3 g of hydrogen
gas?
Answer:
hhshshhxujejushwhbwhsjs s hs
(b)
Huiting wanted to find out the hardness of two materials H and F. She used a
rounded object made of material G and forced it into each material with the
same force. The results of her experiment are shown below.
rounded object of
material G
rounded object
of material G
3 mm
1 mm
object of
material H
object of
material F
List materials F, G, H in increasing order of hardness. Explain your answer.
[2]
Object named H is harder than Object F due to its thickness.
The object of material H is harder than the object of material F due to the difference in thickness. The thickness of Material Object H is 3 millimeters compared to Material Object F which is 1 millimeter thick, so applying the same amount of force on both objects, Material Object H does not show any change in its structure while on the other hand, the shape of the object F changes due to a lower hardness.
https://brainly.com/question/24333064
How would one make a 2 M solution of a compound?
A. By dissolving 1 molar mass of the compound in 2 L of water
B. By dissolving 2 moles of the compound in 1 L of water
C. By dissolving 1 mole of the compound in 2 L of water
D. By dissolving 2 g of the compound in 1 L of water
To make a 2 M solution, the correct method is to dissolve 1 mole of the compound in 2 L of water. This results in a concentration of 2 moles per liter, which corresponds to a 2 M solution.
The correct option is C.
To make a 2 M (molar) solution of a compound, we need to dissolve an appropriate amount of the compound in a given volume of solvent, typically water, to achieve a concentration of 2 moles per liter.
Molarity (M) is defined as moles of solute per liter of solution. To prepare a 2 M solution, we need a concentration of 2 moles per liter. This means that for every liter of solution, we should have 2 moles of the compound.
Option A suggests dissolving 1 molar mass of the compound in 2 L of water. However, molar mass is not equal to moles. Molar mass represents the mass of one mole of the compound.
Option B suggests dissolving 2 moles of the compound in 1 L of water. This would result in a concentration of 2 moles per liter, which matches the desired 2 M concentration. However, the given option indicates dissolving 2 moles in 1 L, which contradicts the definition of molarity.
Option C suggests dissolving 1 mole of the compound in 2 L of water. This aligns with the definition of molarity, as it gives us a concentration of 1 mole per liter. To achieve the desired 2 M concentration, we would need to double the amount, resulting in 2 moles per liter.
Option D suggests dissolving 2 g of the compound in 1 L of water. This option does not consider the molar mass of the compound and assumes that the molar mass is equal to 2 grams per mole, which is not always the case.
In conclusion, option C is the correct choice for making a 2 M solution, as it involves dissolving 1 mole of the compound in 2 L of water.
For more such information on: mole
https://brainly.com/question/29367909
#SPJ8
yall what do ya think shaped ya feelings bout science classes?
I was interested in science when I first saw a diagram of Solar system in my sister's geography book. At that time I was in Senior Kindergarten and she was in 6th grade. At first, I was just interested in space, universe and black holes stuff, but then as I started learning more, I realised how amazing other branches of science are too. They are so systematic. What encourages me to learn more are the gaps in science, its mysteries, I wish to uncover them one day, and for that I am preparing myself. When I am in a science class, I try to imagine where can I apply this knowledge in my day to day life, and my teachers are fascinated when I ask them if this principle is responsible for this phenomena. I love it very much. I like Physics the most, but other branches are great too.
The structure of a water molecule (H20) can be written as H-O-H, with each dash representing a chemical bond.
Count the number of bonds the oxygen and hydrogen atoms form in a water molecule.
Answer:
oxygen shows 2 bonds with hydrogen
A mineral sample has a mass of 35 g. When it is dropped into a graduated cylinder with 25mL of water, the volume of the water rises to 35 mL. Using this data, determine the density of the sample.
Answer:
3.5g/ml
Explanation:
density=mass/volume
the mass of the mineral we have been given to be 35g
and it's volume is found by subtracting the initial volume from the final volume which is 35ml-25ml=10ml
Answer:
[tex]\boxed {\boxed {\sf 3.5 \ g/mL}}[/tex]
Explanation:
The density of an object is the mass per unit volume, so the formula is:
[tex]\rho= \frac {m}{v}[/tex]
We know the mass of the mineral sample is 35 grams.
We have to calculate the volume. The volume was found using water displacement. An amount of water was put in a graduated cylinder, then the object was dropped in. The volume is the difference between the final water level and the initial water level.
v= final water - initial water v= 35 mL - 25 mL v= 10 mLNow we know the mass and volume of the mineral sample.
m= 35 g v= 10 mLSubstitute the values into the formula.
[tex]\rho= \frac{35 \ g}{10 \ mL}[/tex]
Divide.
[tex]\rho = 3.5 \ g/mL[/tex]
The density of the mineral sample is 3.5 grams per milliliter.
difference between Nitrogen 1 oxide and Oxygen
Answer:
one atom of oxygen is not equal to oxygen
Which of the following represents an endothermic reaction?
Select one:
a. S(s) +O2(g) → SO2(g) ΔH = -297kJ
b. 2NO2(g) → N2(g) + 2O2(g) + 33.8kJ
c. N2(g) + 2O2(g) + 90.4kJ → 2NO2
d. N2H4(g) + O2(g) → N2(g) +2H20(g) + 627.6 kJ
B because decomposition reactions are often caused by the application of heat to break up the bonds within the molecules, which will form the molecules that made up the decomposed molecule.
what is cytoplasm ? what does it contain?
Answer:
Cytoplasm is a thick solution that fills each cell and is enclosed by the cell membrane. It is mainly composed of water, salts, and proteins. All of the organelles in eukaryotic cells, such as the nucleus, endoplasmic reticulum, and mitochondria, are located in the cytoplasm.
Answer:
Explanation:
Cytoplasm is a thick solution that fills each cell and is enclosed by the cell membrane. It is mainly composed of water, salts, and proteins. All of the organelles in eukaryotic cells, such as the nucleus, endoplasmic reticulum, and mitochondria, are located in the cytoplasm. ...
Choose the incorrect statement. Question 5 options: A reaction intermediate has fully formed bonds. A reaction intermediate is produced and used up during the reaction. An activated complex has partially formed bonds. A transition state and a reaction intermediate are the same.
Answer:
Option D) A transition state and a reaction intermediate are the same.
Explanation:
A transition state and a reaction intermediate are the not same. The transition state represents the highest energy in the steps of a reaction, whereas an intermediate, on the other hand, is represented by the lowest energy minimum in a reaction.
Which sentence describes existing cells?
All cells, once formed, continue to live forever.
All cells come from previously existing cells.
All the cells that are on Earth have always been here.
All cells develop from the remains of other cells.
Doing my summer school work right now. Please help me pass I don’t want to take chemistry for the third time.
What is an alkyne?
A. A hydrocarbon containing all single bonds
B. A hydrocarbon containing a carbon-carbon double bond
C. A hydrocarbon containing a carbon-carbon triple bond
D. A hydrocarbon containing an aromatic ring
Alkynes are called the hydrocarbons. Ethyne is an important alkyne which is used in oxyacetylene gas cutting. A hydrocarbon containing a carbon-carbon triple bond is the alkyne. The correct option is C.
What is an alkyne?In organic chemistry, an alkyne is defined as the unsaturated hydrocarbon containing at least one carbon-carbon triple bond. The alkynes are unsaturated hydrocarbons and their general formula is CₙH₂ₙ₋₂ and the triple bond is known as the acetylene bond.
Many alkynes are found in nature. Ethyne is the first member of the alkyne family in which two carbon atoms are connected by a triple bond. Almost all alkynes are also found to be hydrophobic in nature.
Alkynes show three types of isomerism like chain isomerism, position isomerism and functional isomerism. The triple bond present in the alkynes is its functional group.
Thus the correct option is C.
To know more about Alkynes, visit;
https://brainly.com/question/23508203
#SPJ7
are standard electrode potential and standard hydrogen potential same?
Answer:
Potentials of any other electrodes are compared with that of the standard hydrogen electrode at the same temperature. Hydrogen electrode is based on the redox half cell: 2 H+(aq) + 2 e− → H2(g)..
2(3a-3)-2(a-2)=3
thank you
Answer:
6a - 6 - 2a + 4 = 3
4a - 2 = 3
4a = 3 + 2
4a = 5
a = 5/4
hope that helps ✌
Please help me find what type of chemical reaction takes place from numbers 1-5.
Which phrase correctly describes the molecular structure within a molecule?(1 point)
A the location of atoms, groups, or ions relative to one another and the number, type, and location of covalent bonds
B long, repeating chains of molecules
C the smallest fundamental unit of a compound that participates in reactions, represented by a bonded group of atoms
D the basic unit of a chemical element
Answer: A the location of atoms, groups, or ions relative to one another and the number, type, and location of covalent bonds
Explanation: I just took the assessment and in my notebook molecular structure has a definition that is literally answer A. Also I got it right lol.
Josefina and Raul were comparing how sound moves through various mediums and how charge moves through conducting wires. They performed experiments to find out if the factors that determine the speed of sound are the same as those that determine the flow in a circuit. What did they find? Describe two things that they found. For each, explain how the speed of sound and flow of current are affected
They found that difference occurs in the speed of both sound and charges occur due to the difference in the type of medium.
Sound and charges needs specific medium for faster movement i.e. sound moves faster in solid as compared to liquid and gas whereas charges moves faster and easily in gold due to lower resistance which is followed by copper. Sound can move from solid, liquid and gases whereas charges move only in solid metal in which free electrons are present. The speed of sound and flow of current are affected due to difference in the arrangement of atoms in solid, liquid and gas.
https://brainly.com/question/24373020
Which metal can replace another metal in a reaction?
A. Any metal on the list can replace any other metal also on the list.
B. A metal on the activity series list will replace one that is not on the
list.
C. A metal lower on the activity series list will replace one that is
higher
D. A metal higher on the activity series list will replace one that is
Tower
Answer:
D
Explanation:
The atoms of the more reactive metal push their electrons on to ions of the less reactive metal.
Convert 50 m to mm
using the method of dimensional analysis
Answer:
Explanation:
meters has to go on the bottom of the bracket used for conversion
50m [ 1000 mm / 1 m]= 50000 mm The meters cancel
Randys first race is a potato sack race that is 410 meters long how many kilometers is the potato sack race
What happens when a metalloid gets heated up?
A: It acts as an insulator and slows the flow of electrons.
B:It blocks the flow of all electrons.
C:It conducts more electricity, allowing electrons to move more freely.
D:It becomes too dangerous for electricity to flow through it.
Answer:
it becomes too dangerous for electricity to flow through it
if any 1 studying 11th can u plz send me the chemistry notes for chapter 2 STRUCTURE OF AN ATOM lesson
plz send me honestly cause i have exam day after tommorow .so plz send unwanted answer
I BEG U
Answer:
What
You cant just send notes you also have to say where you are and which book you are using because others are different
write an importance of endothermic reactions
Answer:
the uses of exothermic reactions are:
1) lighting of stove
2) self heating cans
3) hand warmers
4) in some case exothermic process can be used to cook food such as rice (by adding calcium oxide to water heat is evolved and it helps to cook food )
Explanation:
hope this helps you pls mark me as brainilst
which type of model best represents simple molecules?
> ribbon
> wire
> Lewis dot
> structural formula
Answer:
Lewis dot
Explanation:
It's a very simplified representation of the valence shell electrons in a molecule.
The correct answer is Lewis dot.
A Lewis dot structure of a molecule is a structure in which the valence electrons of the molecule are represented using dots.
It is usual to seek a simple representation for simple molecules that explains in part, the properties of the molecule.
Such a representation must show the valence electrons in the molecule. A simple representation that can do this is the Lewis dot structure of molecules. The Lewis dot structure of NO2 molecule is shown in the image attached to this answer.
It was introduced by G.N Lewis and can be successfully used to represent many simple chemical molecules.
https://brainly.com/question/4144781
