Write a program that repeatedly accepts as input a string of ACGT triples and produces a list of the triples and the corresponding amino acids, one set per line. The program will continue to accept input until the user just presses ENTER without entering any DNA codes.

Answer:

Explanation:

The following program is written in Java. The main method asks the user to enter 10 different integer values. These values are saved to an integer array and passed to the SelectionSortDescendTrace() method. This method sorts the array in descending order while printing the entire array after every outer loop cycle. The program was tested and the output can be seen in the attached image below.

import java.util.*;

class Brainly {

   // Main Method

   public static void main(String[] args)

   {

       Scanner in = new Scanner(System.in);

       int[] myArr = new int[10];

       for (int i = 0; i < 10; i++) {

           System.out.print("Enter an integer: ");

           myArr[i] = in.nextInt();

           System.out.print('\n');

       }

       SelectionSortDescendTrace(myArr);

   }

   public static void SelectionSortDescendTrace(int[] myArr) {

       int temp;

       for (int i = 0; i < myArr.length; i++)

       {

           for (int j = 0; j <myArr.length; j++)

           {

               if (j != myArr.length - 1)

               {

                   if (myArr[j] < myArr[j + 1])

                   {

                       temp = myArr[j];

                       myArr[j] = myArr[j + 1];

                       myArr[j + 1] = temp;

                   }

               }

           }

           System.out.println(Arrays.toString(myArr));

       }

   }

}

Answer:

Direct memory access (DMA) is a process that allows an input/output (I/O) device to send or receive data directly to or from the main memory, bypassing the CPU to speed up memory operations and this process is managed by a chip known as a DMA controller (DMAC).

Explanation:

A defined portion of memory is used to send data directly from a peripheral to the motherboard without involving the microprocessor, so that the process does not interfere with overall computer operation.

In older computers, four DMA channels were numbered 0, 1, 2 and 3. When the 16-bit industry standard architecture (ISA) expansion bus was introduced, channels 5, 6 and 7 were added.

ISA was a computer bus standard for IBM-compatible computers, allowing a device to initiate transactions (bus mastering) at a quicker speed. The ISA DMA controller has 8 DMA channels, each one of which associated with a 16-bit address and count registers.

ISA has since been replaced by accelerated graphics port (AGP) and peripheral component interconnect (PCI) expansion cards, which are much faster. Each DMA transfers approximately 2 MB of data per second.

A computer's system resource tools are used for communication between hardware and software. The four types of system resources are:

DMA channels are used to communicate data between the peripheral device and the system memory. All four system resources rely on certain lines on a bus. Some lines on the bus are used for IRQs, some for addresses (the I/O addresses and the memory address) and some for DMA channels.

A DMA channel enables a device to transfer data without exposing the CPU to a work overload. Without the DMA channels, the CPU copies every piece of data using a peripheral bus from the I/O device. Using a peripheral bus occupies the CPU during the read/write process and does not allow other work to be performed until the operation is completed.

With DMA, the CPU can process other tasks while data transfer is being performed. The transfer of data is first initiated by the CPU. The data block can be transferred to and from memory by the DMAC in three ways.

In burst mode, the system bus is released only after the data transfer is completed. In cycle stealing mode, during the transfer of data between the DMA channel and I/O device, the system bus is relinquished for a few clock cycles so that the CPU can perform other tasks. When the data transfer is complete, the CPU receives an interrupt request from the DMA controller. In transparent mode, the DMAC can take charge of the system bus only when it is not required by the processor.

However, using a DMA controller might cause cache coherency problems. The data stored in RAM accessed by the DMA controller may not be updated with the correct cache data if the CPU is using external memory.

Solutions include flushing cache lines before starting outgoing DMA transfers, or performing a cache invalidation on incoming DMA transfers when external writes are signaled to the cache controller.

Answer:

See explanation

Explanation:

DMA [tex]\to[/tex] Direct Memory Access.

The peripherals of a computer system are always in need to communicate with the main memory; it is the duty of the DMA to allow these peripherals to transfer data to and from the memory.

The first step is that the processor starts the DMA controller, then the peripheral is prepared to send or receive the data; lastly, the DMA sends signal when the peripheral is ready to carry out its operation.

Answer:

// CPP program to find type of input character

#include <iostream>

using namespace std;

void charCheck(char input_char)

{

// CHECKING FOR ALPHABET

if ((input_char >= 65 && input_char <= 90)

|| (input_char >= 97 && input_char <= 122))

cout << " Alphabet ";

// CHECKING FOR DIGITS

else if (input_char >= 48 && input_char <= 57)

cout << " Digit ";

// OTHERWISE SPECIAL CHARACTER

else

cout << " Special Character ";

}

// Driver Code

int main()

{

char input_char = '$';

charCheck(input_char);

return 0;

}

Explanation:

// CPP program to find type of input character

#include <iostream>

using namespace std;

void charCheck(char input_char)

{

// CHECKING FOR ALPHABET

if ((input_char >= 65 && input_char <= 90)

|| (input_char >= 97 && input_char <= 122))

cout << " Alphabet ";

// CHECKING FOR DIGITS

else if (input_char >= 48 && input_char <= 57)

cout << " Digit ";

// OTHERWISE SPECIAL CHARACTER

else

cout << " Special Character ";

}

// Driver Code

int main()

{

char input_char = '$';

charCheck(input_char);

return 0;

}

Answer:

Explanation:

The following pseudocode for this method using operations of the ADT list would be the following

swap(aList, indexI, indexJ) {

    initialize temp_variable = Retrieve(indexI, aList)

    Insert(Retrieve(indexJ, aList), indexI, aList)

    Insert(Retrieve(indexI, aList), temp_variable, aList)

}

This code basically saves the aList index of i , into a temporary Variable. Then it sets the aList index of i to the value of the element in index of j. Then it does the same for the index of j with the tem_variable. If we assume that the indexes of i and j exist, then it can crash our entire program if those indexes are missing from the list when we try to access them.

Answer:

a. True

Explanation:

An information system (IS) can be defined as a set of components or computer systems, which is used to collect, store, and process data, as well as dissemination of information, knowledge, and distribution of digital products.

Generally, it is an integral part of human life because individuals, organizations, and institutions rely on information systems in order to perform their duties, functions or tasks and to manage their operations effectively. For example, all organizations make use of information systems for supply chain management, process financial accounts, manage their workforce, and as a marketing channels to reach their customers or potential customers.

Additionally, an information system comprises of five (5) main components;

1. Hardware.

2. Software.

3. Database.

4. Human resources.

5. Telecommunications.

An operating system is a system software pre-installed on a computing device to manage or control software application, computer hardware and user processes.

This ultimately implies that, an operating system acts as an interface or intermediary between the computer end user and the hardware portion of the computer system (computer hardware) in the processing and execution of instructions.

On a related note, the software application that executes the critical functions of an information system (IS) are contained in its operating system (OS).

Basically, the computer's memory, processes, softwares and hardwares are typically being managed by the operating system (OS). Thus, an OS makes it possible for different programs to run simultaneously (more than one software program running concurrently) and access the computer's memory, central processing unit (CPU), and storage.

Answer:

The program in Python is as follows:

char = input("Character: ")[0]

string = input("String: ")

kount = string.count(char)

print(kount,char,end="")

if kount!=1:

   print("'s")

Explanation:

This gets character input

char = input("Character: ")[0]

This gets string input

string = input("String: ")

This counts the occurrence of char in string

kount = string.count(char)

This prints the number of occurrence and the character

print(kount,char,end="")

This prints 's, if kount is other than 1

if kount!=1:

   print("'s")

Answer:

Read Technical Books. To improve your technical skills and knowledge, it's best to read technical books and journals. ...

Browse Online Tutorials. ...

Build-up online profile. ...

Learn new Tools. ...

Implement what you learned. ...

Enrich your skillset. ...

Try-out and Apply.

Answer should probably be B. I don’t think you’d need an application to transfer data, and the computer wouldn’t even tell you if the data couldn’t transfer if you have the wrong cable head. It wouldn’t even be connected.

The root cause at the time when transferring the data from mobile device to the computer is that the port on the device is either damaged or it is underpowered.

The following are not the root causes for the error message at the time of transferring the data from a mobile device to the computer:

Therefore we can conclude that the root cause at the time when transferring the data from a mobile device to the computer is that the port on the device is either damaged or it is underpowered.

Learn more about the data here: brainly.com/question/10980404

Answer:

when dressing feaded back is postive and then list areas of inprovmenr to met the job requirements

Explanation:

The correct option is "All of the above".

ETL simply means “extract, transform, and load.” ETL is a vital process in the strategies of data integration.

ETL also allows for verification of data transformation, aggregation and calculations rules.

Furthermore, ETL enables companies to be able to gather data from different sources and then consolidate the data hats gathered into a single and centralized location.

ETL also allows different types of data to be able to work together.

In conclusion, based on the information given above, the answer will be All of the above.

Read related link on:

https://brainly.com/question/13333461

Answer:

Replace /* Your solution goes here */ with the following expression

accelGravity = (G * M) / (distCenter *distCenter );

Explanation:

Required

Complete the code

The equivalent expression of (G * M) / (d^2) is:

(G * M) / (distCenter *distCenter );

The expression must be stored in accelGravity.

So, we have:

accelGravity = (G * M) / (distCenter *distCenter );

Answer:

a

Explanation:

sdfghj

Answer and Explanation:

For the training set consist of 1000 observations, let's have a set consist of the observations such as sets.seed train boost.caravan gbm(Purchase., data = Caravan.train , distribution = "gaussian" , n trees = 1000 summary(boost.caravan) The tree classification such as tree(formula = Purchase data - train where variable are used in tree construction and number of terminal nodes 0 and deviance is 0.7 and error is 0.165

Answer:

Code:-

using System;

using System.Collections.Generic;

class MainClass {

public static void Main (string[] args) {

int Val1,Val2,total;

string input;

double overall;

Console.Write("Cost of First Item (in $)");

      input = Console.ReadLine();

Val1 = Convert.ToInt32(input);

Console.Write("Cost of Second Item (in $)");

      input = Console.ReadLine();

Val2 = Convert.ToInt32(input);

total=Val1+Val2;

if (total >= 100)

{

overall=.9*total;

Console.WriteLine("Your total purchase is $"+overall);

}

else if (total >= 50 & total < 100)

{

overall=.95*total;

Console.WriteLine("Your total purchase is $"+overall);

}  

else

{

Console.WriteLine("Your total purchase is $"+total);

}  

}

}

Output:

Answer:

1)Pseudocode:-

Prompt user to enter string

Pass it to combination function which can calculate the entire combination and can return it in an array

In combination method -

Check if the string is length 2 size ie of 0 or 1 length then return string itself

Else iterate through string user entered

Get the present character within the variable and check if the variable is already used then skip

Create a string from 0 to i the index + (concatenate) i+1 to length and recursive call combination function and pass this string and store end in subpermutation array

For each recursive call push character + sub permutation in total arrangement array.

2)Code -

function combinations(userStr) {

   /* when string length is less than 2 then simply return string */

   if (userStr.length < 2) return userStr;

   /* this array will store number of arrangement that word can be stored */

   var totalArrangements = [];

   /* iterate through string user enter  */

   for (var i = 0; i < userStr.length; i++) {

       /* get the current  character  */

       var character = userStr[i];

       /*check if character is already used than skip  */

       if (userStr.indexOf(character) != i)

           continue;

       /* create a string and concanete it form  0  to i index and i+1 to length of array   */

      var str = userStr.slice(0, i) + userStr.slice(i + 1, userStr.length);

       /* push it to totalArrangments  */

       for (var subPermutation of combinations(str))

           totalArrangements.push(character + subPermutation)

   }

   /* return the total arrangements */

   return totalArrangements;

}

/* ask user to prompt string  */

var userStr = prompt("Enter a string: ");

/* count to count the total number of combinations */

let count = 0;

/* call function the return tolal number of arrangement in array */

totalArrangements = combinations(userStr);

/* print the combination in console  */

for (permutation of totalArrangements) {

   console.log(permutation)

}

/* total combination will be  totalArrangements.length */

count = totalArrangements.length;

/*print it to console  */

console.log("Total combination " + count)

Output:-

int main {

//variables

unsigned long num = 0;

std::string phrase = " Please enter your name for confirmation: " ;

std::string name;

//codes

std::cout << phrase;

std::cin>> name;

while ( serial.available() == 0 ) {

num++;

};

if ( serial.avaliable() > 0 ) {

std::cout << " Thank you for your confirmation ";

};

};

Answer:

Explanation:

// C++ Program to Find Grade of Student

// -------codescracker.com-------

#include<iostream>

using namespace std;

int main()

{

   int i;

   float mark, sum=0, avg;

   cout<<"Enter Marks obtained in 5 Subjects: ";

   for(i=0; i<5; i++)

   {

       cin>>mark;

       sum = sum+mark;

   }

   avg = sum/5;

   cout<<"\nGrade = ";

   if(avg>=91 && avg<=100)

       cout<<"A1";

   else if(avg>=81 && avg<91)

       cout<<"A2";

   else if(avg>=71 && avg<81)

       cout<<"B1";

   else if(avg>=61 && avg<71)

       cout<<"B2";

   else if(avg>=51 && avg<61)

       cout<<"C1";

   else if(avg>=41 && avg<51)

       cout<<"C2";

   else if(avg>=33 && avg<41)

       cout<<"D";

   else if(avg>=21 && avg<33)

       cout<<"E1";

   else if(avg>=0 && avg<21)

       cout<<"E2";

   else

       cout<<"Invalid!";

   cout<<endl;

   return 0;

}

Answer:

var monthlyDeposit = 200;

var accountBalance = 0;

for(var i = 0;i<12;i++){

   accountBalance += monthlyDeposit;

   console.log(accountBalance);

}

Answer:

Explanation:

dxfcgvhb

Answer:

The security principle being referred to here is:

Resource Encapsulation.

Explanation:

Resource Encapsulation is one of the cybersecurity first principles.  It allows access or manipulation of the class data as intended by the designer. The cybersecurity first principles are the basic or foundational propositions that define the qualities of a system that can contribute to cybersecurity.  Other cybersecurity first principles, which are applied during system design, include domain separation, process isolation, modularization, abstraction, least principle, layering, data hiding, simplicity, and minimization.

Answer:

D. Excessive disk space consumption due to storing large documents.

Explanation:

When a company is planning to use NAFDs in its office rather than paper work, the efficiency of employees will increase as unnecessary paper work takes time in handling and printing. When data is stored on disks there is a risk that employees store large or irrelevant files in the disk which will create storage issues.

Answer:

ArraySize = ($ - newArray)

Explanation:

Given

Array name: newArray

Type: DWORD

Required

The size of the array in bytes

The following formula is used to calculate the size of an array in assembly language.

Variable = ($-Array name)

So, we have:

ArraySize = ($ - newArray)

Where ArraySize is the variable that holds the size of newArray (in bytes)

Answer:

bc

Explanation:

Answer and Explanation:

function processNumbers(alist){

var Ourarray= new array(alist);

Ourarray.foreach(

if(isNaN()){

Console.log( "An element in the list is not a number."};

break;

}

}

processNumbers(alist)

From the above, we have defined a function that takes an array parameter(the following array variable will make sure of that). We test each element in the array using foreach array function. The for each function runs the if statement and if isNan is true for each of the elements in the array.

Answer:

The answer is below

Explanation:

1. Computer Network: this is a system of interconnection of computers and computing devices that utilizes wires or radio waves over certain reachable locations.

2. Telecommunications: this is known to be the system or combination of telephones device and networks that transmit telephone signals.

3. A local area network: often referred to as LAN, is a system of networks that covers a smaller area usually within a room, floor, building, or campus.

4. Personal area network: often referred to as PAN, this is a network that covers few distances, usually between wireless devices like PDAs, laptops, and other devices.

5. Metropolitan area network: often referred to as MAN, this is a system of the network that serves quite a larger area, usually between that serve an area of 1 to 30 miles radius. For example, a typical city.

6. Wide area network: often referred to as WAN, this is a system of a large network that covers a large area such as parts of states, many states, countries, and the world at large.

7. Network management: this is defined to be a process of designing, installing, and supporting a computer network, such as computer hardware and software

8. Convergence: this is known to be a connection, combination, and integration of two or more computer technologies in a single device or system for operation.

Answer:

C++

Explanation:

C++ is used in application development

Answer:

The answer is "Spending the money can improve the company's reputation and attract new personnel with the necessary abilities".

Explanation:

In many cases, companies engage in activities tangential to their principal service or brand. As more than just a result, the purpose is to boost the company's reputation and at the same time raising societal awareness.

To strengthen its very own business reputation and to create future employees by teaching necessary skills, a technology organization may be established throughout the given case.

Every one of these initiatives helps to boost the brand's reputation & image, as well as the customer's confidence.

Answer:

Web based email is a service that allows to access and use electronic mail via web browser.

It allows clients to login into the email software running on a web server to compose, send and receive, delete mails basically.