With respect to a right handed Cartesian coordinate system and given that . A = 4i + k and B = 2i + j _ 3k find A cross B

Answer:

The distance between mirror and you is 2 ft.

Explanation:

diameter, d = 8 ft

radius of curvature, R = 4 ft

magnification, m = 0.5

focal length, f = R/2 = 4/2 = 2 ft

let the distance of object is u and the distance of image is v.

[tex]\frac{1}{f}=\frac{1}{v}+\frac{1}{u}\\\\\frac{1}{2}=\frac{1}{v}+\frac{1}{u}\\\\v = \frac {2 u}{u - 2}[/tex]

Use the formula of magnification

[tex]m = \frac{v}{u}\\\\0.5 =\frac { u}{u - 2}\\ \\u - 2 = 2 u \\\\u = -2 ft[/tex]

Answer:

100 Joules

Explanation:

Applying,

W = mgh................... Equation 1

Where W = workdone to hold the box above the ground, mg = weight of the box, h = height of the box.

From the question,

Given: mg = 10 newtons, h = 10 meters.

Substitute these values into equation 1

W = 10×10

W = 100 Joules.

Hence the amount of workdone is 100 Joules

Answer:

N/C = V/m.

Explanation:

The SI unit of electric field is N/C. Sometimes the units are written as V/m.

We know that,

1 V = 1 J/C

Using dimensional analysis,

The dimensional formula for Joules is [M¹L² T⁻²].

The dimensional form of coulomb is [M⁰ L⁰ T¹ I¹].

So,

J/C = [M¹L² T⁻³I¹] ...(1)

The dimensional formula of Newton is [M¹ L¹ T⁻²]

The dimensional form of coulomb is [M⁰ L⁰ T¹ I¹].

N/C= [M¹L² T⁻³I¹] ....(2)

From (1) and (2) it is clear that the N/C is equal to V/m.

Answer:

Various uses of water :

1. Water is used for daily purpose like cooking , bathing , cleaning and drinking.

2. Water used as a universal solvent.

3. water maintains the temperature of our body.

4. Water helps in digestion in our body.

5 .water is used in factories and industries.

6. Water is used to grow plants , vegetables and crops.

Answer:

I = 3.6 kg•m²

Explanation:

Conservation of angular momentum

Let's assume CW is the positive direction

3.4(-6.1) + I(9.3) = 3.4(1.8) + I(1.8)

I(9.3 - 1.8) = 3.4(1.8 + 6.1)

I(7.5) = 3.4(7.9)

I = 3.4(7.9)/(7.5) = 3.5813333333...

The moment of inertia of the second disk will be  [tex]I=3.58\ kg-m^2[/tex]

The moment of inertia is defined as the product of mass of section and the square of the distance between the reference axis and the centroid of the section.

here it is given that

MOI of disk one   [tex]I_1=3.4\ kg-m^2[/tex]

Angular velocity  [tex]w_1=6.1\ \frac{rad}{s}[/tex]

Angular velocity of disk two  [tex]w=1.8\ \frac{rad}{s}[/tex]

MOI of the disk two [tex]I=?[/tex]

The final angular velocity [tex]w_f= 1.8\ \frac{rad}{sec}[/tex]

Now from the conservation of the momentum the angular momentum before collision will be equal to the angular momentum after collision.

[tex]I_1w_1+I_2w_2=(I_1+I_2)w_f[/tex]

Now put the values in the formula

[tex](3.4\times 6.10)+(I_2\times 9.3)=(3.4+I_2)\times 1.8[/tex]

[tex]I_2=3.58\ kg-m^2[/tex]

Thus the moment of inertia of the second disk will be  [tex]I=3.58\ kg-m^2[/tex]

To know more about moment of inertia follow

https://brainly.com/question/18721435

Answer:

V = 168 km³

Explanation:

...............

Answer:

Sources:

-- https://intblog.onspot.com/en-us/why-do-bridges-become-icy-before-roads

and

-- https://www.accuweather.com/en/accuweather-ready/why-bridges-freeze-before-roads/687262

I hope this helps you! ^^

Answer:

Explanation:capacitor

Answer:

Ammeter

Explanation:

pls mark me as a brainlist

Answer:

the charge of the particle is 2.47 x 10⁻¹⁹ C

Explanation:

Given;

mass of the particle, m = 6.64 x 10⁻²⁷ kg

velocity of the particle, v = 8.7 x 10⁵ m/s

strength of the magnetic field, B = 1.3 T

radius of the circle, r = 18 mm = 1.8 x 10⁻³ m

The magnetic force experienced by the charge is calculated as;

F = ma = qvB

where;

q is the charge of the particle

a is the acceleration of the charge in the circular path

[tex]a = \frac{v^2}{r} \\\\ma = qvB\\\\q = \frac{ma}{vB} \\\\q = \frac{mv^2}{rvB} = \frac{mv}{rB} \\\\q = \frac{(6.64\times 10^{-27} ) \times (8.7\times 10^5)}{(1.8\times 10^{-2}) \times (1.3)} \\\\q = 2.47 \ \times 10^{-19} \ C[/tex]

Therefore, the charge of the particle is 2.47 x 10⁻¹⁹ C

Answer:

the distance moved by the puck after 2.5 s is 7.8 m

Explanation:

Given;

mass of the puck, m = 2 kg

initial velocity of the puck, u = 0

applied force, F = 5 N

time of motion, t = 1.5 s

Acceleration of the puck is calculated from Newton's second law of motion;

F = ma

a = F/m

a = 5/2

a = 2.5 m/s²

The distance moved by the puck after 2.5 s is calculated as;

s = ut + ¹/₂at

s = 0 + ¹/₂at²

s = ¹/₂at²

s = 0.5 x 2.5 x (2.5)²

s = 7.8 m

Therefore, the distance moved by the puck after 2.5 s is 7.8 m

Answer:

the magnitude of the magnetic force on the wire segment is 6.03 x 10⁻⁶ N

Explanation:

Given;

length of the conductor, L = 1 cm = 0.01 m

current carried by the solenoid, I₁ = 15 A

radius of the solenoid, r = 4 cm

number of turns per length of the solenoid, n = 800 turns/m

current carried by the solenoid, I₂ = 40 mA = 0.04 A

The magnetic field of the solenoid is calculated as;

B = μnI₂

where;

μ is the permeability of free space = 4π x 10⁻⁷ Tm/A

B = ( 4π x 10⁻⁷) x (800) x (0.04)

B = 4.022 x 10⁻⁵ T

The magnitude of the magnetic force on the wire segment is calculated as;

F = BI₁L sinθ

where

θ is the angle made by the wire segment against the solenoid = 90⁰

F = (4.022 x 10⁻⁵) x (15) x (0.01) x sin(90)

F = 6.03 x 10⁻⁶ N

Therefore, the magnitude of the magnetic force on the wire segment is 6.03 x 10⁻⁶ N

The question is incomplete. The complete question is :

Two loudspeakers are placed 1.8 m apart. They play tones of equal frequency. If you stand 3.0 m in front of the speakers, and exactly between them, you hear a minimum of intensity. As you walk parallel to the plane of the speakers, staying 3.0 m away, the sound intensity increases until reaching a maximum when you are directly in front of one of the speakers. The speed of sound in the room is 340 m/s.

What is the frequency of the sound?

Solution :

Given :

The distance between the two loud speakers, [tex]d = 1.8 \ m[/tex]

The speaker are in phase and so the path difference is zero constructive interference occurs.

At the point [tex]D[/tex], the speakers are out of phase and so the path difference is [tex]$=\frac{\lambda}{2}$[/tex]

Therefore,

[tex]$AD-BD = \frac{\lambda}{2}[/tex]

[tex]$\sqrt{(1.8)^2+(3)^2-3} =\frac{\lambda}{2}$[/tex]

[tex]$\lambda = 2 \times 0.4985$[/tex]

[tex]$\lambda = 0.99714 \ m$[/tex]

Thus the frequency is :

[tex]$f=\frac{v}{\lambda}$[/tex]

[tex]$f=\frac{340}{0.99714}$[/tex]

[tex]f=340.9744[/tex] Hz

Explanation:

OGLE-2005-BLG-390Lb.

PSR B1620-26 b. Surface Temperature: 72 Kelvin. ...

Neptune. Surface Temperature: 72 Kelvin. ...

Uranus. Surface Temperature: 76 Kelvin. ...

Saturn. Surface Temperature: 134 Kelvin. ...

Jupiter. Image Courtesy: NASA. ...

OGLE-2016-BLG-1195Lb. Surface Temperature: Unknown

Answer:

If decreased blood pressure is detected, the adrenal gland is stimulated by these stretch receptors to release aldosterone, which increases sodium reabsorption from the urine, sweat, and the gut. This causes increased osmolarity in the extracellular fluid, which will eventually return blood pressure toward normal.

Answer:

181 is the answer I think so

Answer:

A. When moving towards a high pressure center the pressure values ​​increase in the equipment

B. This area is called high prison since the weight of the atmosphere on top is maximum

Explanation:

A) A high atmospheric pressure system is an area where the pressure is increasing the maximum value is close to 107 Kpa, the other side as low pressure can have small values ​​85.5 kPa.

When moving towards a high pressure center the pressure values ​​increase in the equipment

B) This area is called high prison since the weight of the atmosphere on top is maximum

in general they are areas of good weather

Answer:

24m

Explanation:

you can use the formula

s=ut+1/2at²

s=0+1/2(3)(4)²

=1/2(3)(8)

=24m

I hope this helps

Answer:

Modern technology is the advancement of old technology with adjustments.

1. Ghana is still developing economically and modern  infrastructure is not yet well established.

2. Ghana has Environmental- health concerns which contribute to the lack of improvement of technology in Ghana.

3.  Youth unemployment is prevalent therefore contributing to lack of improvement of technology in Ghana.

Explanation:

Ghana is a developing country with rising debt payments which could very well contribute as whole to the lack of improvement of technology in Ghana.

Answer:

X = 10.8387 cm²/s

Explanation:

In this exercise, you're required to convert a value from one unit to another.

Converting 42 ft²/hr to cm²/s;

Conversion:

1 ft² = 929.03 cm²

42 ft² = X cm²

Cross-multiplying, we have;

X = 42 * 929.03

X = 39019.26 cm²

Next, we would divide by time in seconds.

1 hour = 3600 seconds

X = 39019.26/3600

X = 10.8387 cm²/s

Answer:

a)  a = 5.3 km, b) sum fulfills the commutative property

Explanation:

This is a vector exercise, If you drive east from north, we can find the vector using the Pythagorean theorem

              R² = a² + b²

where R is the resultant vector R = 7.5 km and the others are the legs

If we assume that the two legs are equal to = be

             R² = 2 a²

             r = √2 a

             a = r /√2

we calculate

             a = 7.5 /√2

             a = 5.3 km

therefore, you must drive 5.3 km east and then 5.3 km north and you will reach the same point

b) As the sum fulfills the commutative property, the order of the elements does not alter the result

         a + b = b + a

therefore, it does not matter in what order the path is carried out, it always reaches the same end point

Answer:

Can't understand the language

Answer:

Abby is standing (4.5^2 + 2.3^2)^1/2   from the far speaker

D2 = 5.05 m from the far speaker

The difference in distances from the speakers is

5.05 - 4.5 = .55 m     (Let y be wavelength, lambda)

n y = 4.5

(n + 1) y = 5.05 for the speakers to be in phase at smallest wavelength

y = .55 m          subtracting equations

f = v / y = 340 / .55 = 618 / sec     should be the smallest frequency

This seems to be incomplete, as we do not have any information about the magnetic field surrounding the wire, but we can answer in a general way.

We know that for a wire of length L, with a current I, and in a magnetic field B, the force can be written as:

F = L*(IxB)

if we define the right as the positive x-axis, and knowing that the current flows to the right, we can write:

I = i*(1, 0, 0)

And the field will be some random vector that can't be parallel to the current because in that case, we do not have any force.

To find the direction of the force, which will tell us the direction in which the wire deflects or moves, first, we need to point with our thumb in the direction of the current, in this case, to the right.

Now, with the hand open, using the tip of our other fingers we point in the direction of the magnetic field.

For example, if the magnetic field is in the positive z-axis, we will point upwards.

Now the palm of our hand tells us in which direction the force is applied.

This is the right-hand rule.

For example, in the case that the current goes to the right and the magnetic field is upwards, we could see that the force is to the front.

Explanation:

Given:

t = 20 seconds

x = 3000 m

y = 450 m

a) To find the vertical component of the initial velocity [tex]v_{0y}[/tex], we can use the equation

[tex]y = v_{0y}t - \frac{1}{2}gt^2[/tex]

Solving for [tex]v_{0y}[/tex],

[tex]v_{0y} = \dfrac{y + \frac{1}{2}gt^2}{t}[/tex]

[tex]\:\:\:\:\:\:\:=\dfrac{(450\:\text{m}) + \frac{1}{2}(9.8\:\text{m/s}^2)(20\:\text{s})^2}{(20\:\text{s})}[/tex]

[tex]\:\:\:\:\:\:\:=120.5\:\text{m/s}[/tex]

b) We can solve for the horizontal component of the velocity [tex]v_{0x}[/tex] as

[tex]x = v_{0x}t \Rightarrow v_{0x} = \dfrac{x}{t} = \dfrac{3000\:\text{m}}{20\:\text{s}}[/tex]

or

[tex]v_{0x} = 150\:\text{m/s}[/tex]

Answer:

Explanation:

The formula is

[tex]F_g=\frac{Gm_1m_2}{r^2}[/tex] and filling in:

[tex]F_g=\frac{(6.67*10^{11})(400)(800)}{(45^2)}[/tex] and multiply and divide all that out to get

[tex]F_g=1.1*10^{-8}[/tex]  It should really only be 1 significant digit since 400 and 800 both have only 1 significant digit, but I used 2. It should be

[tex]F_g=[/tex] 1 × 10⁻⁸ N

Answer:

[tex]F=133N[/tex]

Explanation:

From the question we are told that:

Length [tex]l=3.0m[/tex]

Mass [tex]m=24kg[/tex]

Distance from Tip [tex]d=35cm[/tex]

Generally, the equation for Torque Balance is mathematically given by

[tex]mg(l/2)=F(l-d)[/tex]

[tex]2*9.81(3/2)=F(3-35*10^-2)[/tex]

Therefore

[tex]F=133N[/tex]

Answer:

the tendency of electron dipole moments to align with an applied magnetic field

Explanation:

Paramagnetism has to do with possession of unpaired electrons. Substances that possess unpaired electrons are said to be paramagnetic.

When an external magnetic field is applied to a paramagnetic substance, the magnetic field causes the electrons spins of the paramagnetic substance to align parallel to the field,which leads to a net attraction.

Hence, paramagnetism is closely associated with the tendency of electron dipole moments to align with an applied magnetic field.

Answer:

EMF = 51.01 Volt

Explanation:

A 50-turn coil has a diameter of 15 cm. The coil is placed in a spatially uniform magnetic field of magnitude 0.500~\text{T}0.500 T so that the plane of the coil makes an angle of 30^\circ30 ​∘ ​​ with the magnetic field. Find the magnitude of the emf induced in the coil if the magnetic field is reduced to zero uniformly in 0.100~\text{s}0.100 s

We have,

Number of turn in the coil, N = 50

The diameter of the coil, d = 15 cm

Radius, r = 7.5 cm = 0.075 m

Initial magnetic field, [tex]B_i=0.5\ T[/tex]

The plane of the coil makes an angle of 30° with the magnetic field.

The magnetic field reduced to zero in 0.1 seconds

We need to find the emf induced in the coil. We know that, emf is equal to the rate of change of magnetic flux. So,

[tex]\epsilon=\dfrac{BNA\cos\theta}{t}\\\\\epsilon=\dfrac{0.5\times 50\times \pi \times 0.075\cos(30)}{0.1}\\\\\epsilon=51.01\ V[/tex]

So, the induced emf in the coil is 51.01 V.

Answer:

0.37 m

Explanation:

Given :

Window height, [tex]h_1[/tex] = 1.27 m

The flowerpot falls 0.84 m off the window height, i.e.

[tex]h_2[/tex] = (1.27 x 0.84 ) m in a time span of [tex]$t=\frac{8}{30}$[/tex]   seconds.

Assuming that the speed of the pot just above the window is v then,

[tex]h_2=ut+\frac{1}{2}gt^2[/tex]

[tex]$(1.27 \times 0.84) = v \times \left( \frac{8}{30} \right) + \frac{1}{2} \times 9.81 \times \left( \frac{8}{30} \right)^2$[/tex]

[tex]$v=\left(\frac{30}{8}\right) \left[ (1.27 \times 0.84) - \left( \frac{1}{2} \times 9.81 \times \left( \frac{8}{30 \right)^2 \right) \right]}$[/tex]

[tex]$v= 2.69$[/tex] m/s

Initially the pot was dropped from rest. So,  u = 0.

If it has fallen from a height of h above the window then,

[tex]$h = \frac{v^2}{2g}$[/tex]

[tex]$h = \frac{(2.69)^2}{2 \times 9.81}$[/tex]

h = 0.37 m

Answer:

the correct one is d

Explanation:

The filament of the bulb fulfills the law of ohm

          V = i R

indicate that the filament resistance increases with temperature, as the voltage remains constant if the resistance of the filament increases the current should decrease,

When examining the different statements, the correct one is d