Answer:
hope this helps
Explanation:
Gas metal arc welding (GMAW), sometimes referred to by its subtypes metal inert gas (MIG) welding or metal active gas (MAG) welding, is a welding process in which an electric arc forms between a consumable MIG wire electrode and the workpiece metal(s), which heats the workpiece metal(s), causing them to melt and join.
MIG welding, uses a continuously fed solid wire electrode that is used for filler metal that welds together two pieces of metal
Carbon dioxide in concentration of 1-2% is commonly used in the mix with argon to reduce the surface tension of the molten metal. Another common blend is 25% carbon dioxide and 75% argon for GMAW. Helium is lighter than air; larger flow rates are required. It is an inert gas, not reacting with the molten metals.
Gas metal arc welding (GMAW)
Welding Processes: The welding process is significant. ...
Base Metal Properties: Properties of the base metal affect welding performance
Find the lowest common denominator for the following pairs of fractions.
4/32 and 5/8
Answer:
1/8 and 5/8
Explanation:
4/32 = 2/16 = 1/8
5/8 cannot be divided into any lowest common denominator
Help me out kinda confusing.
Answer:
Switch 1 and 3
Explanation:
only bell can pro sound energy, so we just need to make sure the bell within the closed circuit.
Answer:
switch 1 and 3
Explanation:
see attached
what type of transistor is controlled by voltage
Answer: a FET and a Bipolar Transistor
Any VOLTAGE signal used the junction transistor base circuit must be converted (or limited) to a current of suitable size using a resistor or other device. Hence the junction transistor is a current controlled device that can be made to operate with an input voltage and external circuit components.
Explanation:
Not really a Engineering person but I tried and answer correctly
which of the following kinds of wood are classified as hardwood?
Hemlock,
redwood,
willow,
spruce
Which of these would correct Sayid's error?
Change the heading of the chart to “Mechanical.”
Replace “travel in straight lines” with “move in curved paths.”
Add “move due to particles bumping into each other” to the chart.
Change “move only through matter” to “move through space and matter.”
Answer:
D. Change “move only through matter” to “move through space and matter.”
Hope this helps!
Explanation:
1. Using Kirchhoff's Laws what is the voltage of the power supply E?
100 V
+
E = ?
75 V
150 V
25 V
Answer:
rfffrffffffgggggtgggffExplanation:
ggggggtttggfgcfffyggvyggggggghgggggggggvggvb.vh
mhn
h
u
What is the purpose of an engineering notebook?
ОА. .
to record the design process
OB.
to record the manufacturing process
OC.
to record the brainstorming discussions
OD.
to record the performance of the prototype
O E.
to record the ideation process
Whats the best M13 class And also give me the best attachments for the AA-12
Answer: Compensator (Muzzle)
Tempus Marksman (Barrel)
No Stock (Stock)
Commando Foregrip (Underbarrel)
Stippled Grip Tape (Rear Grip) try this
I don't use the AA-12
Explanation:
what others task at home requires you to wear personal protective equipments?
Answer:
cleaning the bathroom
Explanation:
1. Briefly state the use for each of the following types of engineered lumber : laminatedveneer lumber (LVL ), glue-laminated beams (glulams ), parallel - strand lumber (PSL) , and laminated strand lumber (LSL).
Answer:
see below
Explanation:
laminated veneer lumber (LVL)
It is typically used for headers, beams, rim board, and edge-forming material.glue-laminated beams (glulam)
glulam is an alternative to steel or concrete for constructing the roof of buildings such as swimming pools, sports halls and supermarkets. The laminating process allows a single, large structural member to be manufactured by laminating a number of smaller pieces of timberparallel - strand lumber (PSL)
PSL is a form of engineered wood made from parallel wood strands bonded together with adhesive.It is used for beams, headers, columns, and posts, among others uses.laminated strand lumber (LSL)
LSL is used primarily as structural framing for residential, commercial and industrial construction. Common applications of LSL in construction include headers and beams, tall wall studs, rim board, sill plates, millwork and window framing. LSL also offers good fastener-holding strength.Respond to this question if you’re really on Brainly because you’re in quarantine and you have nothing else to do
Answer:
I have nothing to do
Explanation:
I got homework to do,but I'm lazy
do you like soup vovovovovovovov
Answer:
yesssssssssss ma'ammmmmmmmm
Explanation:
fgty4th5e45
What is the Median Pay of Advertising, Promotions, or Marketing Managers?
$127,560 per year
$98, 459
$40,502
$75,272
Answer:
$127,560 per year
Explanation:
What weapon is at the center of the modern carrier battle group?
Answer:
Aircraft Carriers ofc!!
Explanation:
pls mark brainliest :)
what flies without wings?
If you competed in my others you will know the rules.Get it right all the good stuff. Wrong and get reported
Answer:
lol time flies
Explanation:
Answer:
Time
Explanation:
Technician A says an open-end wrench provides the best grip on a hex head fastener.Technician B says a box-end wrench provides the best grip on a hex head fastener. Who is correct? *
Answer:technician b only
Explanation:
Technician B says a box-end wrench provides the best grip on a hex head fastener is a correct statement.
What is an open-end wrench?An open-end wrench is known to be a type of wrench that has two flat sides which are known to be very important in gripping of the flat sides of square head or a hex – head nuts.
Conclusively, The best advantage of Box-ended wrenches is that the wrench is fully closed on both ends and as such technician B is correct.
Learn more about fastener from
https://brainly.com/question/7622839
What is the significance of an extension line in an engineering drawing?
A.
the line shows the limits of a dimension
B.
the line shows dimensions not used in fabrication
C.
the line is perpendicular to the dimension line used to show a feature
D.
the line shows visible features of the figure
E.
the line shows hidden features of the figure
Answer:
c
Explanation:
c
Adam wants to become a certified professional engineer. What are the steps that he will have to follow?
Answer:
Explanation:
Graduate from an ABET-accredited engineering program.
Pass the Fundamentals of Engineering (FE) exam.
Work as an engineer for four years.
Pass the Professional Engineering (PE) exam (you cannot take the PE exam without first passing the FE exam).
All individuals are shaped by their backgrounds and their experiences; these experiences serve to create their
viewpoints. Multiple viewpoints are hugely beneficial when trying to find creative solutions to complex problems, as
expressed by the cliché.....
A "One person is all you need."
B "Three's a crowd"
"Two heads are better than one."
D "Eight is enough."
Answer:
C. "Two heads are better than one."
Explanation:
This phrase simply means its better to have the advise or views of a second person with previous background information and experience on a concept/ problem you are solving instead of relying on one's understanding. This cliche is important in problem solving process because it provides insights on the concept which can act as a foundation as you start figuring out a solution to a problem. The outcome include : better solutions, creativity and improved ways for tackling the particular challenge. Multiple view points will give the engineer a wider perspective on a concept which includes the barriers to expect as he/she compose a better solution to a certain challenge.
3/16 equals how many thirty-seconds?
Ratios contrast two figures by ordinarily dividing them. A/B would be your formula if you were comparing one data point (A) to another data point (B). This indicates that you are multiplying information A by information B.
What ways to calculate ratio digits into seconds?You may calculate the amount of time that has passed since the execution of a method by comparing the time values before and after it. The Instant class's now() method returns the Duration and the current time.
The simplest way to figure out how much time has passed is to count up in hours. By deducting the number of minutes in the earliest time from 60, first determine the number of minutes from that time to the following hour. Up until the hour before the end time, count the hours.
Therefore, 3/16 is equivalent to 6 30s. To get 6/32, multiply both digits in 3/16 by 2. For more details, log in.
Learn more about seconds here:
https://brainly.com/question/27266226
#SPJ2
when you enroll in high school do they look at 8th grade grades during pandemics?
Answer:
Some school do and don't it all depends on the school.
Explanation:
Describe an online environment, give at least three indicators.
Answer:
The computer-mediated space in which online distance education occurs, often asynchronous and web-based.
It's indicators are:
1) Climate change
2) Fresh water resources
3) Air quality
What is the value of x in this code block
x=3
X= X+3
y=x+15
X=2
O 3
06
021
2.
Answer:
The correct answer is x=2 after you solve the problem
Explanation:
Which of the following best describes green enhanced skills occupations?
A. occupations that the green economy needs but that don’t require new skill sets
B. occupations for which green economy technologies and activities have themselves created unique requirements for both tasks and workers
C. occupations for which green economy technology and activities generate more demand
D. occupations for which green economy technologies and activities cause significant changes to the actual tasks, skill sets, and requirements
PLZ HELPPPP WILL GIVE BRAINLIEST!!!!!
Can anyone help me with this welding assignment!
In the GMAW process, the electrode comes in what form?
What replaces flux in the GMAW process?
In the GMAW process, what two shielding gases are commonly used when welding on steel?
What welding organization has designated GMAW as the proper name for the wire feed welding process?
List two factors that could affect weld quality even before welding begins?
Answer:
hope this helps
Explanation:
Gas metal arc welding (GMAW), sometimes referred to by its subtypes metal inert gas (MIG) welding or metal active gas (MAG) welding, is a welding process in which an electric arc forms between a consumable MIG wire electrode and the workpiece metal(s), which heats the workpiece metal(s), causing them to melt and join.
MIG welding, uses a continuously fed solid wire electrode that is used for filler metal that welds together two pieces of metal
Carbon dioxide in concentration of 1-2% is commonly used in the mix with argon to reduce the surface tension of the molten metal. Another common blend is 25% carbon dioxide and 75% argon for GMAW. Helium is lighter than air; larger flow rates are required. It is an inert gas, not reacting with the molten metals.
Gas metal arc welding (GMAW)
Welding Processes: The welding process is significant. ...
Base Metal Properties: Properties of the base metal affect welding performance
Summarize the role of a structural engineer, including what the job entails, and identify three areas in which they work.
Answer:
The correct answer includes that structural engineering is a specialized branch of mechanical or civil engineering.
Explanation:
These engineers consider load and weight and that a structure must resist weather elements. Three areas they may work in include tall buildings, ports and harbors, and space structures.
Answer:
structural engineering is a specialized branch of mechanical or civil engineering. They consider load and weight and that a structure must resist weather elements. Three areas they may work in include tall buildings, ports and harbors, and space structures.
Analyze the example of this band saw wheel and axle. The diameter of the wheel is 14 inches. The diameter of the axle that drives the wheel is 3/4 inch. The actual force needed to cut through a one-inch-thick softwood board is 1.75 pounds. Consider the efficiency of this band saw to be 22%. Considering the efficiency of this system, calculate the actual mechanical advantage of the wheel and axle
Answer:
The actual mechanical advantage of the wheel and axle is approximately 4.1067
Explanation:
The given parameters are;
The diameter of the wheel = 14 inches
The diameter of the axle that drives the wheel = 3/4 inches
The force needed to cut a one-inch-thick softwood board = 1.75 pounds
The efficiency of the band saw = 22%
Mechanical advantage = Force output/Force input = Input distance/(Output distance)
Input distance/(Output distance) = 14/(3/4) ≈ 18.67
Mechanical advantage ≈ 18.67
Given that efficiency = Useful energy output/(Total energy input), we have;
Efficiency = 22% = 0.22 × Expected output, we have;
The actual mechanical advantage = 0.22 × 18.67 ≈ 4.1067
The actual mechanical advantage ≈ 4.1067
Input and output of a game system, Tablet, Digital assistant, and a phone
- Please help ASAP, I will give brainiest
yea yea yea yea yea yes no actually yes
Answer:
yes
Explanation:
Answer:no
Explanation:
Which building material would provide the best surface for viewing a reflection? cement brick glass wood
The building material would provide the best surface for viewing a reflection is glass.
What material is used for building?Note that building material are said to be tools or materials that are used in the building of a thing such as houses.
Note that they include Wood, cement, aggregates, and others. Therefore, the The building material that would provide the best surface for viewing a reflection is glass.
Learn more about building material from
https://brainly.com/question/15995910
SPJ2
Answer:
glass
Explanation:
edge 2022
