Which type of wires (copper, aluminum, or string) are ferromagnetic metals?

Answers

Answer 1

Answer:

Copper isn't ferromagnetic,

Aluminum isn't ferromagnetic,

String has a ferromagnetic property

So in conclusion:

The answer is strings :)


Related Questions

A ball is thrown vertically upward.It's velocity at the highest point is?
A. 10 ms^-1
B. Zero
C. 10 ms^-2
D. None of these

Answers

B

Explanation:

BECAUSE IT WAS GOING UPWORD THEN IT'S VELOCITY WAS DECREASING -10MS¹

Answer:

Explanation:

From physics, which is directly related to math (especially when it comes to parabolic motion!), we learn that at the very top of the parabola the object has to stop for a millisecond so it can turn around and fall back to earth. This translates to a velocity of 0 at its highest point. So B.

Give reason Pascal is a derived unit​

Answers

The pascal is the SI derived unit of pressure used to quantify internal pressure, stress, Young's modulus and ultimate tensile strength.

Symbol ⇥ Pa

7. A thin wire was wound 30 times closely over a boiling tube. The total length of the windings as measured was found to be 6.3mm. Determine the diameter of the wire .​

Answers

Answer:

Diameter of wire = 0.00021 meters

Explanation:

Given the following data;

Number of windings = 30

Length of windings = 6.3 mm to meters = 0.0063 meters

To find the diameter of the wire, we would use this mathematical expression;

Length of windings = number of windings * diameter of wire

Substituting the values into the expression, we have;

0.0063 = 30 * diameter of wire

Diameter of wire = 0.0063/30

Diameter of wire = 0.00021 meters

What is use of lemon Squeezer​

Answers

Answer:

A lemon squeezer is a small kitchen utensil designed to extract juice from lemons or other citrus fruit such as oranges, grapefruit, or lime. It is designed to separate and crush the pulp of the fruit in a way that is easy to operate.

Answer:

A lemon squeezer is a small kitchen utensil designed to extract juice from lemons or other citrus fruit such as oranges, grapefruit, or lime. It is designed to separate and crush the pulp of the fruit in a way that is easy to operate.

Explanation:

stay safe

A monatomic gas is measured to have an average speed of 1477 m/s. If the
total amount of the gas is 2 mol (which equates to a mass of 0.008 kg), what
is the approximate temperature of the gas? (Recall that the equation for
kinetic energy due to translation in a gas is KEtranslational = 1 mv2 = 3 nRT,
2
and R = 8.31 J/(mol-K).)
2

Answers

Answer:

The temperature of the gas is 350.02 K.

Explanation:

The average speed is related to the temperature as follows:

[tex] \bar v = \sqrt{\frac{3RT}{M}} [/tex]   (1)

Where:

[tex] \bar v [/tex]: is the average speed = 1477 m/s

R: is the gas constant = 8.31 J/(K*mol)                                                  

T. is the temperature =?

M: is the molar mass

First, let's find the molar mass:

[tex] M = \frac{m}{n} [/tex]

Where:

m: is the mass of the gas = 0.008 kg

n: is the number of moles = 2 mol

[tex] M = \frac{m}{n} = \frac{0.008 kg}{2 mol} = 0.004 kg/mol [/tex]

Hence, by solving equation (1) fot T we have:

[tex] T = \frac{\bar v^{2}*M}{3R} = \frac{(1477 m/s)^{2}*0.004 kg/mol}{3*8.31 J/(K*mol)} = 350.02 K [/tex]

Therefore, the temperature of the gas is 350.02 K.

I hope it helps you!            

Electricity flows from
positive to positive
negative to positive
negative to negative
positive to negative

Answers

Answer:

is it from positive to negative am I right tell me if I am wrong

Answer:

positive to negative

The flow of electric current is similar to the flow of water which is from higher level to lower level.

The electric current flow from higher potential region(positive* low concentration of electron) to lower potential region(negative*high concentration of electron)

a. A man of 100 kg mass is standing on the surface of the earth of mass 6 × 1024 kg and
radius 6400km. Calculate the gravitational force between them. [Ans: 977.05 N]

Answers

Answer:

m1=100kg

m2=6×10^24kg

r=6400km

G=6.6×10^-11

F=?

as we know that

F=G m1.m2/r²

F=6.6×10^-11×100×6×10^24/(6400)²

F=6.6×10^-11×6×10^26/4.096×10^7

F=6.6×10^-11×1.465×10^19

F=9.67×10^8N

Plz Help me thank uuu...
Which of these is a likely impact of the stronger than normal trade winds on the eastern Pacific ocean?

Warm surface water builds up, causing lower than average temperature.
Warm surface water builds up, causing higher than average temperature.
Warm surface water is reduced, causing colder conditions than normal.
Warm surface water is reduced, causing hotter conditions than normal.

Answers

Answer:

Jet stream would be displaced southwards causing heavy rain and flooding.

Explanation:

The other options of the question were A) Jet stream would be displaced northwards causing drought. B) Jet stream would be displaced southwards causing drought. D) Jet stream would be displaced northwards causing heavy rain and flooding,

The statement that is a likely impact of stronger than normal trade winds in the Pacific Northwest to the United States is "Jet stream would be displaced southwards causing heavy rain and flooding."

We are talking about climate or weather terminology. In this case, we are referring to the "El Niño" (the Children) effect. Its presence affects the weather in North America. This phenomenon combines with the "La Niña) effect and it presents itself every two to seven years, ad they last from 8 to 12 months, affecting the weather conditions of the region.

Answer:

jet stream should be displaced southwards which causes heavy rainfall and flood.

D=12000 m
T= 30min
V=?
Ayudenme en este ejercicio xfa
En m/min y en Km/h

Answers

Ugh can u say it in English im sorry i don’t read Spanish

During the collision of a big truck with a small passenger carGroup of answer choicesthe force from the truck on the car is always much bigger than the force from the car on the truck.the force from the truck on the car may be smaller than, greater than, or equal to the force from the car on the truck.the force from the truck on the car is always much smaller than the force from the car on the truck.the force from the truck on the car is always equal to the force from the car on the truc

Answers

Answer:

The force from the truck on the car is always equal to the force from the car on the truck.

Explanation:

According to Newton's third law; action and reaction are equal and opposite. Hence, when the big truck and small passenger car are involved in a collision, we expect that the force from the truck on the car is always equal to the force from the car on the truck. The forces on the car and the truck are equal in magnitude but opposite in direction.

This follows directly from Newton's third law of motion hence the answer above.

a car moves at a speed of 40km/h. it is stopped by applying brake which produce a uniform acceleration of-0.5m/s^2. how much distance will it move before coming to stop ?

Answers

Answer:

Explanation:

We first need to convert the 40 km/h to m/s. Going by the fact that 40 has only 1 significant figure in it, 40 km/h = 10 m/s. The rest of the values are in their proper labels. We will use the equation:

[tex]v^2=v_0^2+2a[/tex]Δx where the final velocity is 0 because the car is coming to a stop at the end; the initial velocity is 10 m/s, the acceleration (or, rather, deceleration) is -.5 m/s/s, and our unknown which is displacement. Filling in:

[tex]0=(10)^2+2(-.5)[/tex]Δx and solving for Δx:

Δx = [tex]\frac{-100}{2(-.5)}[/tex] which ends up being simply that

Δx = 100 m

hai điện tích q1 =-2.10^(-8), q2=1,8.10^(-8) đặt tại A và B trong không khí,AB=8cm. Một điện tích q3 đặt tại C. 1, C ở đâu để q3 cân bằng

Answers

Answer:

Đáp án là vị trí để đặt q3 tại vị trí cân bằng là cách A một đoạn 0,0411 m

và nằm trong AB

Explanation:

Do q1 và q2 trái dấu nên q3 nằm trong

gọi r1 là vị trí từ A đến q3 suy ra r2=0.08-r1

Vị trí cân bằng nên [tex]\frac{q1}{r1^{2} }[/tex] = [tex]\frac{q2}{(0.08-r1)^{2} }[/tex]

state Pascal's principle of pressure . please help due tomorrow​

Answers

Answer:

Pascal's law says that pressure applied to an enclosed fluid will be transmitted without a change in magnitude to every point of the fluid and to the walls of the container.

Explanation:

The pressure at any point in the fluid is equal in all directions.

Explanation:

According to pascal law ,Force applied on bulk of water in a container will be distributed to all molecules of water...

Hydroplaning causes your front wheels to actually leave the pavement and the wheels are riding on a thin layer of water. This lack of traction with the pavement takes away your control of the vehicle. To regain control of your vehicle you should___________.

Answers

Answer: Remove your foot from the gas pedal and slow down

Explanation:

Hydroplaning also refers to aquaplaning and this refers to the scenario whereby there's a layer of water that builds between the tyres of a car and the surface of the road which then brings about a loss of traction which eventually leads to a situation whereby the car doesn't respond to control inputs.

This lack of traction with the pavement takes away your control of the vehicle and to regain control of the vehicle, one should remove your foot from the gas pedal and slow down.

A ball of mass 1.0 kg is rolling due west at 30 m/s. A second ball of mass 2.0 kg moving due north at 6.0 m/s collides with the first ball and they stick together. What is the magnitude of the momentum of the two-ball system immediately after collision

Answers

Answer:

the magnitude of the momentum of the two-ball system immediately after collision is 32.31 kg.m/s

Explanation:

Given;

mass of the first ball, m₁ = 1.0 kg

mass of the second ball, m₂ = 2.0 kg

initial velocity of the first ball, v₁ = 30 m/s due west

initial velocity of the second ball, v₂ = 6 m/s due north

From the principle of conservation of linear momentum;

the total momentum before collision = total momentum after collision

The westward momentum of the first ball, = m₁v₁ = 1 x 30 = 30 kg.m/s

The northward momentum of the second ball = m₂v₂ = 2 x 6 = 12 kg.m/s

The resultant momentum of the two balls;

R² = 30² + 12²

R² = 1044

R = √1044

R = 32.31 kg.m/s

Therefore, the magnitude of the momentum of the two-ball system immediately after collision is 32.31 kg.m/s

Given that on Earth, gravity causes an acceleration of 9.8 m/s2, what is an acceleration of 7 g?

Answers

Answer:

68.6 m/s^2

Explanation:

1 g = 9.8 m/s^2

so

7 g × 9.8m/s^2 = 68.6

A spacecraft orbits the Earth at height of 1600km. Calculate the escape velocity for the spacecraft.
[G= 6.67×10^-11Nm^2kg^-2, mass of the Earth= 5.97×10^24kg, radius of the Earth= 6.37×10^6m]​

Answers

Answer:

what do u need help with

Explanation:

Calculate the escape velocity for the spacecraft. [G= 6.67×10^-11Nm^2kg^-2, mass of the Earth= 5.97×10^24kg, radius of the Earth= ...

An airplane flying at 116 m/s. E, is accelerated uniformly at the rate of 9.2 m/s2, E, for 13 s. What is its final velocity in m/s?

Answers

Answer:

235.6m/s

Explanation:

you have to use one of the kinematic formulas the best that suits the question given in this case you can use v=u+at.since the time, acceleration and initial velocity have been given in the question

v=116+(9.2)13^2

v=116+119.6

=235.6m/s

I hope this helps

Annie has a soccer ball and a cake ball she kicks each ball with the same Force the soccer ball accelerates at 3 m per second squared and the kickball accelerates at 5 m per second squared use Newton's law to describe why the kickball has a greater acceleration

Answers

Answer: The acceleration will be greater in the kickball than the soccer ball since the kick ball has a smaller mass and provided they are acted upon with equal force magnitude.

Explanation:

We can prove this by substituting with numerical values.

Say the force she kicked both balls with was 30 N. The mass of the soccer ball is 10kg and the mass of the kickball is 6kg.

Applying Newtons Second Law, F = ma

For the soccer ball:

30 = 10a
a = 30/10
a = 3

For the kickball:

30 = 6a
a = 30/6
a = 5

Hence the kickball will travel with a greater acceleration given the same force is acted upon and has a smaller mass than the soccer ball

Hope this helps, brainliest would be appreciated :)

Two boys X and Y each have the same total weight
and are standing on soft ground.
Which boy is more likely to sink into the soft ground and
why?
boy more
likely to sink
pressure on soft
ground
А
Х
larger than Y
B
Х
smaller than Y
C
Y
larger than X
D
Y
smaller than X​

Answers

Answer:

the child with the smallest area will be the one who sinks

Explanation:

The child who will sink to the ground is the one who exerts the greatest pressure on the ground, even though the force, which in this case is equal to the weight, is equal.

Pressure is defined by

           P = F / A

in this case the strength of the children is their weight

           F = W

           P = W / A

therefore the pressure changes are in the area of ​​contact with the ground, the child with the smallest area will be the one who sinks

what is the direction of magnetic lines of force outside the magnet​

Answers

please mark me as brainiest p

Explanation:

Magnetic lines of force are closed curves. C) Outside the magnet their direction is from north pole to south pole and inside the magnet these are from south to north pole.

how does she hold a newspaper while reading without using the lens? why?​

Answers

bananas are grrrrrreat

Which two statements are true about a system?

a)A system is a group of objects analyzed as one unit.
b)Energy that moves across system boundaries is conserved.
c)There’s only one way to define the boundaries of a system.
d)All systems are made by humans.

Answers

A and c

Because it defines the boundaries of the system

what can be done to increase speed of rotation of a DC motor​

Answers

Answer: There are multiple options:

By varying the supply voltage.

By varying the flux, and by varying the current through the field winding.

By varying the armature voltage, and by varying the armature resistance.

Helpful Link:

https://www.elprocus.com/what-are-the-best-ways-to-control-the-speed-of-dc-motor/

The capacity of an RD bottle is 100 cc and its mass is 45 g. Find the mass of the bottle when it is filled with a liquid of density 600 kg/m3.​

Answers

Answer:

The capacity of an RD bottle is 100cc and its mass is 45g. Find the mass of the bottle when it is filled with a liquid of density 600kg/[tex]m^{3}[/tex]

 

EXPLANATION:

100cc=100[tex]cm^{3}[/tex]

density of liquid=600Kg/  =0.6gm/

 so mass of 100cc liquid will be m=d×V=0.6×100=60gm

So mass of bottle filled with liquid will be bottle+liquid=45gm+60gm=105gm  

Answer is 105gm.

A student project is required to be portable and hand held. It requires 6 V DC power at a current of 150 mA. The batteries for the power supply must last for a minimum of 7 hours of continuous operation. NiMH rechargeable batteries in AA size are to be used. A) How many batteries are needed

Answers

Answer:

a. 5 batteries b. 1050 mAh

Explanation:

Here is the complete question

A student project is required to be portable and hand held. It requires 6 V DC power at a current of 150 mA. The batteries for the power supply must last for a minimum of 7 hours of continuous operation. NiMH rechargeable batteries in AA size are to be used. A) How many batteries are needed? B) What mAh capacity should the batteries have?

Solution

A) How many batteries are needed?

Since the nominal voltage for a single NiMH battery is 1.2 V per battery and we require 6V DC power, we combine the batteries in series to obtain a total voltage of 6 V. The number of batteries required, n = total voltage/voltage per cell = 6V/1.2V per battery = 5 batteries

So, the number of batteries needed is 5.

B) What mAh capacity should the batteries have?

Since the batteries are in series, they would each deliver a current of 150 mA. Since we require a current of 150 mA for 7 hours, the number of milliampere-hours capacity mAh of batteries required is Q = It where I = current = 150 mA and t = time = 7 hours.

So, Q = It = 150 mA × 7 h = 1050 mAh.

So, the batteries should have a mAh of 1050 mAh

A uniform, solid sphere of radius 2.50 cm and mass 4.75 kg starts with a purely translational speed of 3.00 m/s at the top of an inclined plane. The surface of the incline is 2.75 m long, and is tilted at an angle of 22.0∘ with respect to the horizontal. Assuming the sphere rolls without slipping down the incline, calculate the sphere's final translational speed v2 at the bottom of the ramp.

Answers

Answer:

The final translational seed at the bottom of the ramp is approximately 4.84 m/s

Explanation:

The given parameters are;

The radius of the sphere, R = 2.50 cm

The mass of the sphere, m = 4.75 kg

The translational speed at the top of the inclined plane, v = 3.00 m/s

The length of the inclined plane, l = 2.75 m

The angle at which the plane is tilted, θ = 22.0°

We have;

[tex]K_i[/tex] + [tex]U_i[/tex] = [tex]K_f[/tex] + [tex]U_f[/tex]

K = (1/2)×m×v²×(1 + I/(m·r²))

I = (2/5)·m·r²

K =  (1/2)×m×v²×(1 + 2/5) = 7/10 × m×v²

U = m·g·h

h = l×sin(θ)

h = 2.75×sin(22.0°)

∴ 7/10×4.75×3.00² + 4.75×9.81×2.75×sin(22.0°) = 7/10 × 4.75×[tex]v_f[/tex]² + 0

7/10×4.75×3.00² + 4.75×9.81×2.75×sin(22.0°) ≈ 77.93

∴ 77.93 ≈ 7/10 × 4.75×[tex]v_f[/tex]²

[tex]v_f[/tex]² = 77.93/(7/10 × 4.75)

[tex]v_f[/tex] ≈ √(77.93/(7/10 × 4.75)) ≈ 4.84

The final translational seed at the bottom of the ramp, [tex]v_f[/tex] ≈ 4.84 m/s.

8. What type(s) of motion do the particles in a solid undergo? A. vibrational, rotational, and translational B. vibrational and rotational C. vibrational only D. rotational only​

Answers

Explanation:

Particles in solids are always vibrating (moving back and forth) in place.

A 6.0 kg mass is placed on a 20º incline which has a coefficient of friction of 0.15. What is the acceleration of the mass down the incline? show all work please​

Answers

Answer:

Explanation:

The form of Newton's 2nd Law that we use for this is:

F - f = ma where F is the Force pulling the mass down the ramp forward, f is the friction trying to keep it from moving forward, m is the mass and a is the acceleration (and our unknown).

We know mass and we can find f, but we don't have F. But we can solve for that by rewriting our main equation to reflect F:

[tex]wsin\theta-\mu F_n=ma[/tex] That's everything we need.

w is weight: 6.0(9.8). Filling in:

6.0(9.8)sin20 - .15(6.0)(9.8) = 6.0a and

2.0 × 10¹ - 8.8 = 6.0a and

11 = 6.0a so

a = 1.8 m/s/s

From the description of the question, the acceleration is 1.95 ms-2.

What is friction?

The term friction is defined a the force that seeks to prevent the movement of a surface on another.

Now we know that;

ma =mgsinθ -  ukmgcosθ

ma =( 6 * 9.8 * sin 20) - ( 0.15 * 6 * 9.8 * cos 20)

a =  ( 6 * 9.8 * sin 20) - ( 0.15 * 6 * 9.8 * cos 20) /6

a = 20 - 8.29/6

a = 1.95 ms-2

Learn more about acceleration: https://brainly.com/question/14356798

what is the economic application of changes in states of matter

Answers

Answer:

Changes of state are physical changes in matter. They are reversible changes that do not change matter's chemical makeup or chemical properties. For example, when fog changes to water vapor, it is still water and can change back to liquid water again.

Turbine blades are rotated by the steam in the steam turbine.The water at the high temperature get converted into the steam used to rotate the turbine blades.

What is state?

The property of any system on a specified point is known as the state of the system.Pressure,temperature are the properties of the system.

They are reversible modifications that do not alter the chemical composition or characteristics of matter.

The steam turbine blades are turned by the steam. The high-temperature water is turned to steam, which is utilized to rotate the turbine blades.

When fog transforms into water vapor, for example, it is still water and may transform back into liquid water.

Hence the steam turbine is the economic application of changes in states of matter.

To learn more about the state refer to the link;

https://brainly.com/question/15858706

#SPJ2

Other Questions
Forrester Company is considering buying new equipment that would increase monthly fixed costs from $396,000 to $684,000 and would decrease the current variable costs of $80 by $20 per unit. The selling price of $120 is not expected to change. Forrester's current break-even sales are $1,188,000 and current break-even units are 9,900. If Forrester purchases this new equipment, the revised contribution margin ratio would be: Make correct sentences from the words and phrases given. 1. We/ keep/ our bodies/ warm/ avoid/ flu/ a cold. 2. Getting/ enough/ rest/ help/ you/ concentrate/ school. 3. Vitamins/ play/ important/ role/ our diet. 4. You/ not/ play/ more/ computer games/ free time. 5. Doctor/ asking/ Mai/ questions/ about/ health problems. hi pls help. pls explain a bit:) thank you Algebra is confusing !! :( (-8^4 y^7) (-6^3 y z10^4) square root of 12321 by prime factorization Use the following information to prepare a multistep income statement and a balance sheet for Sherman Equipment Co. for 2016. (Hint: Some of the items will not appear on either statement, and ending retained earnings must be calculated.) (Balance Sheet only: Items to be deducted must be indicated with a minus sign.)Salaries Expense $ 69,000 Operating Expenses $ 62,000 Common Stock 100,000 Cash Flow from Investing Activities 78,400 Notes Receivable 24,000 Prepaid Rent 12,500 (short term) Allowance for Doubtful Accounts 7,800 Land 40,000 Uncollectible Accounts Expense 8,100 Cash 48,100 Supplies 1,200 Inventory 98,300 Interest Revenue 5,400 Accounts Payable 46,000 Sales Revenue 320,000 Salaries Payable 12,000 Dividends 3,500 Cost of Goods Sold 148,000 Interest Receivable (short term) 1,500 Accounts Receivable 56,000 Beginning Retained Earnings 81,000 5. The average weight of a blue whale is 4 x 105 pounds. The average weight of an elephant is 1 x 10 pounds. How many more times heavier is a blue whale than an elephant in pounds? Does anyone know what math topic this is? The Ka for acetic acid (HC2H3O2) is 1.80 x 10-5 . Determine the pH of a 0.0500mol/L acetic acid solution.I have no idea how to approach this, so If you have the answer for it, please respond as soon as you can "Four out of five dentists agree that Dentyne is best chewing gum" is an example of an inductive argument where the sample is NOT known.a. Trueb. False Secant ZV intersects secant zw at point Z. Find the length of Tw. If necessary, round to the hundredths place.A. 7B. 8C. 9D. 10 "Having hard skills gets you hired; lacking soft skills gets you fired." In this statement, what ismeant by soft skills? At a university of 25,000 students, 18% are older than 25. The registrar will draw a simple random sample of 242 of the students. The percentage of students older than 25 in the sample has an expected value of 18% and a standard error of:______. 8. What type(s) of motion do the particles in a solid undergo? A. vibrational, rotational, and translational B. vibrational and rotational C. vibrational only D. rotational only The human heart weighs how many pounds Why is page one of the story the importance of being earnest important? what is the difference between the electoral vote and the popular vote In "The Yellow Wallpaper," Charlotte Perkins Gilman's choice of narrator and storystructure creates mystery in the story. Explain how the narrator and structure resultin mystery and eventually surprise in the text. Be sure to provide an introductionparagraph that lays out your argument, body paragraphs that develop your thesis,and a conclusion paragraph that wraps up your argument. (30 points) Materials: Standard Actual Standard: 200 pounds at $3.00 per pound $600 Actual: 220 pounds at $2.85 per pound $627 Direct labor: Standard: 400 hours at $15.00 per hour $6,000 Actual: 368 hours at $16.50 per hour $6,072 What is the journal entry to record labor variances