A molecule is made up of two or more atoms bonded together. True or false
Answer:
True
Explanation:
a group of two or more atoms that form the smallest identifiable unit into which a pure substance can be divided and still retain the composition and chemical properties of that substance.
Other oils, such as car oil and vegetable oil, also consist largely of bonded carbon and hydrogen atoms. Would you predict that these substances are able to mix with gasoline? With water? Explain your answers.
Answer:
Car oil and vegetable oil will mix well with gasoline
Car oil and vegetable oil will not mix with water.
Explanation:
Car oil and vegetable oil will mix well with gasoline
Car oil and vegetable oil will not mix with water.
This is because of the rule of solubility. According to this rule, like substances will only dissolve like substances. In essence, a polar compound will only dissolve another polar compound. A non-polar compound will dissolve only in a non-polar solvent.
Water is polar and oil is non-polar. The cannot mix.
Gasoline is non-polar and will dissolve oil which is also non-polar .
Answer the following questions about the last lesson below. What did we figure out about chain reactions? What did we figure out about fission? Fission produce more energy than a typical fuel sources, chain reaction
Answer:
(Nothing)-But No answer
Need help here plz ASAP!!!!!!!!
Answer:
Three! 3
Explanation:
O2 means that there are two oxygen and I is just one
Answer:
Explanation:
First one is compound
The second one is three
The third one is so dissolving in a glass of water
What is the energy of an object because of its potential and kinetic energies?
chemical energy
electrical energy
nuclear energy
mechanical energy
Can yall plz answer fast!? 20 points if you arent sure its right dont bother
Answer:
The sum of an object's potential and kinetic energies is called the object's mechanical energy. As an object falls its potential energy decreases, while its kinetic energy increases. The decrease in potential energy is exactly equal to the increase in kinetic energy
Thank you and please rate me as brainliest as it will help me to level up
A chemist determines that a sample of petrified wood has a carbon-14 decay rate of 6.00 counts per minute per gram. The decay rate of carbon-14 in fresh wood today is 13.6 counts per minute per gram, and the half life of carbon-14 is 5730 years. What is the age of the piece of wood in years?
Answer:
6,765 years
Explanation:
Calculation to determine the age of the piece of wood in years
First step is to calculate decimal fraction of Carbon-14 that was remaining
Decimal fraction of Carbon-14= 6.00 counts per minute per gram/ 13.6 counts per minute per gram
Decimal fraction of Carbon-14 remaining= 0.4411765
Second step is to calculate the numbers of half-lives that have elapsed
(1/2)^n= 0.4411765
Hence,
n log 0.5 = log 0.4411765
n = 1.18057
Last step is to calculate the length of time that has elapsed
Using this formula
Elapsed length of time=Half life of carbon-14 *n
Let plug in the formula
Elapsed length of time=5,730 years * 1.18057
Elapsed length of time= 6,765 years
Therefore the age of the piece of wood in years will be 6,765 years
Which characteristic applies to all mixtures?
Answer:
A mixture is the blending of two or more dissimilar substances. A major characteristic of mixtures is that the materials do not chemically combine. Mixtures can be divided into those that are evenly distributed (homogeneous) and those that aren't (heterogeneous).
Explanation:
Answer:
A mixture is the blending of two or more dissimilar substances. A major characteristic of mixtures is that the materials do not chemically combine. Mixtures can be divided into those that are evenly distributed (homogeneous) and those that aren't (heterogeneous
Show that the atomic packing factor for BCC is 0.68.
Answer:
wwe are asked to prive the atomic pavking factor APF for BCC is 0.68
solution
APF is given by equation (3.3) in the form
APF =nVs/Vc
whenn is the number of atoms per unit cell and for BCC n=2.0, Vs is the volume of the atom and it is given by 43π3³ and Vc is the volume of the unit cell and for BCC Vc=a³ where a is the side of the cube. From equation 3.4
we could get a by
a=4R/√3
where R is the radius of the atom. Now let us olug the expression inyo equation (1) to get APF
APF = nVs/Vc
=2.0(4/3πR³) / (4R/√3)³
=2.0(4/3πR³) / (4/√3)³ R³
=0.68
Looking at the different chemical structures, which one(s) might be able to hold
cancer fighting drugs and could then travel through the body safely until they
released the drugs into the cancer cells?
a) Graphite and diamond because these well known substances have been used
for years to treat cancer
b) Graphite because it is found in pencils and is a good lubricant
c) Fullerene and carbon nanotubes because they have empty spaces inside the
molecules
d) Diamond because it is one of the hardest substances
Answer:
c) Fullerene and carbon nanotubes because they have empty spaces inside the molecules
Explanation:
Fullerene and carbon nanotubes would be the most desired in order to hold the cancer fighting drugs and to carry them through the body safely.
These molecules have empty spaces in them. The cavities makes it possible for storage. As they pass through the body, they can be held perfectly well to their target site of action.Need help!! (10 Points)
which liquid is the most viscous and why?
What processes are involved in water cycling through the environment?
The Sun keeps shining a) mostly by gravitation contraction b) mostly by chemical reactions c) by converting hydrogen to helium. d) by converting hydrogen to carbon. e) by E = mc2. f) by F=G M_1 M_2/R12
Answer:
C) by converting hydrogen to helium.
Explanation:
The Sun keeps shining because of nuclear fusion processes, which consists in creating helium atoms by combining hydrogen atoms, of an atomic mass less that of helium, in conditions of high core pressure and temperature. In other words, the Sun keeps shining by producing helium at the expense of its hydrogen reserves.
Therefore, the correct answer is C.
Select the correct answer. What inference can be drawn from the graph? a graph of reactant and product concentration vs. time; a red curve shows the reactant decreasing and a blue curve shows the product concentration increasing over time; the two curves do not intersect; the chemical equation shows A + B reacting to produce C + D A. The reaction between A and B is reactant favored. B. The amount of product is greater than the amount of reactant. C. The reaction uses all its reactants to form products. D. The reaction reaches equilibrium at 1.5 seconds. E. The amount of reactants is highest at equilibrium.
Answer:
The answer to the graph below is B
Explanation:
The graph has been depicting that there has been higher concentration of the product as compared to the reactant in the reaction mixture. Thus, option B is correct.
The graph drawn has been the concentration of the reactant and product with respect to the time. The line red has been the reactant concentration, while blue line has been the product concentration.
With the chemical reaction, there has been the decrease in the reactant concentration with the increase in the product concentration.
The graph has been depicting that there has been higher concentration of the product as compared to the reactant in the reaction mixture. Thus, option B is correct.
For more information about the concentration, refer to the link:
https://brainly.com/question/3045247
How many atoms are in 2.00 moles of titanium
Answer:
3.04 atoms
Explanation:
because of the switzer theory
What impact can limiting factors have on a population?
(a) Higher birth rate
(b) Higher death rate
(c) Stable population
(d) Lower death rate
Answer:
The answer is B. Limiting factors can lower birth rates, increase death rates.
Identify the type of sugar corresponding to each name. Sucrose Lactose Fructose Starch Glucose
Answer: Please see answers in explanation column
Explanation:
Name Type of sugars
Sucrose Disaccharide
Sucrose, also called table sugar with molecular formulae C12H22O11 is a disaccharide composed of two monosaccharides ( 50%glucose + 50% fructose.).
Lactose Disaccharide
Lactose with molecular formula C12H22O11, found in milk is a disaccharide composed of two monosaccharides (galactose and glucose).
Fructose Monosaccharide
Fructose with molecular formulae C6H12O6 is a natural sugar mostly found in fruits.
Starch Polysaccharide
Starch ,a complex carbohydrate with molecular formula (C6H10O5)n, is a Polysaccharide containing many units of glucose joined together by 1,4 linkages. Sources of starch can be found in the parts of plants( roots, tubers etc).
Glucose monosaccharides
Glucose, is a simple sugar (monosaccharides) with the molecular formula C6H12O6. It is found in parts of plants as well as in humans and known as blood sugar because of its location in the bloodstream.
2 plus 45 was near tyhe decimal value of h solve for 123v minus 45b
Answer:
47
Explanation:
An ion that consists of 7 protons, 9 neutrons, and 10 electrons has a net charge of
Answer:
-3
General Formulas and Concepts:
Chemistry - Atomic Structure
Protons have a positive (+) chargeNeutrons have a neutral (0) chargeElectrons have a negative (-) chargeExplanation:
Step 1: Define
7 protons, 9 neutrons, 10 electrons.
+7, +0, -10
Step 2: FInd charge
7 + 0 - 10 = -3
At the south Texas nuclear power plant, uranium atoms are split in order to create heat. The heat is used to make steam, which turns a generator to make electricity. What energy changes takes place during this process?
A-Chemical energy to nuclear energy to electrical energy to heat energy
B-Mechanical energy to nuclear energy to heat energy to light energy
C-mechanical energy to heat energy to chemical energy to electrical energy
D-nuclear energy to heat energy to mechanical energy to electrical energy
Answer:
Inside the reactor
In a nuclear reactor the uranium fuel is assembled in such a way that a controlled fission chain reaction can be achieved. The heat created by splitting the U-235 atoms is then used to make steam which spins a turbine to drive a generator, producing electricity.
THIS IS A SCIENCE QUESTION
Which choice describes how temperature differences affect air?
A. Hot air rises, and cold air sinks.
B. Hot air sinks, and cold air rises.
C. Hot air is steady, and cold air moves fast.
D. Hot air moves fast, and cold air rises.
Answer:
A
Explanation:
Hot air is less dense therefore it rises. Cold air is more closely packed therefore it is more dense. Less dense things rise while more dense things sink.
Answer:
A
Explanation:
Think of it like an hot air balloon
Hot air makes it rise and cool air sinks it downwards
Why does sodium have a lower melting point then magnesium
Answer:
Number of delocalized electrons
Explanation:
Magnesium has more delocalized electrons compared to sodium and this accounts for the higher melting point.
When magnesium atoms comes together to form a metallic bonds, they have more network of delocalized electrons. There is more pull for the localized electrons due to the nuclear charge on the nucleus. This strong intermolecular metallic bond increases the melting point of magnesium.How would u describe the shape of a big drop of water. Thanks everyone for your help
Answer:
It is a semi circle with a triangle on top
Oxidation of 1-pentanol could produce 1-pentanal and 1-pentanoic acid
What physical and chemical properties should braces (used to straighten teeth possess in order to attain its desired goal to straighten the teeth) while not presenting a health hazard to the individual?
Answer: Braces are used by the people to correct the alignment and position of tooth or teeth in the jaw.
Explanation:
The teeth braces must have strong tensile strength and must create a constant pressure on the teeth so as to allow the straightening of the teeth.
The strong force of attraction between the molecules of the braces material that can be steel, nickel, molybdenum, copper, titanium. This makes the bracing material rigid on the teeth.
how many bonding electrons pairs are in SO2
The Sulfur Dioxide which is also known as Sulphur Dioxide is the entity of a bond between Sulfur and Oxygen atoms. It is known as a formula written as SO2. Here we will provide an explanation of SO2 molecular geometry, SO2 electron geometry, SO2 bond angle, and SO2 Lewis structure.Now, if we want to check the exact molecular shape of SO2, then we should understand the positions and number of electrons distributed between Sulphur and Oxygen. In the outer level, Sulphur has six electrons, and the Oxygen has four of them among which one electron is used for each bond. So total number of ten electrons in five pairs. To make bonds, four pairs are needed, so one pair remains alone. The two double bonds use two pairs each and form as a single unit.As the single alone pair not counted in the shapes description, we can conclude that the molecular shape of SO2 is V-Shaped or Bent. So, our first perception of the original structure does not match with the original one. The electron geometry of SO2 is formed in the shape of a trigonal planner. The three pairs of bonding electrons arranged in the plane at an angle of 120-degree. As the one pair remained alone, two double pairs are bonded and form a bent shape. By analyzing the Lewis structure of SO2, we can see that the SO2 is asymmetrical because it contains a region with different. Though there are so many similarities between electron geometry and molecular geometry, there are some key differences. One of the most notable differences is that the electron geometry can be associated with one or more molecular shapes. It depends on the central atoms structure of electrons of the molecule, while the molecular geometry depends on the other atoms too which are bonded to the central atom or the free pairs of electrons.To create the Lewis structure of SO2, you need to arrange the eight valence electrons on the Sulphur. To design the best Lewis structure, you also need to calculate the formal charge of every atom too. You know that both the Sulphur and Oxygen has six valence electrons each. Here we have two Oxygen atoms, so a total number of valence electrons will be eighteen.The SO2 has a bond angle of 120-degree. One single atom of Sulphur is bonded with two atoms of Oxygen covalently. It causes a repulsion of electron pairs to form the 120-degree angle.
How many moles of titanium (Ti) atoms are in 85.3 g of Ti?
Answer:
1.7820210165667731 your welcome :)
Explanation:
Which substance can be decomposed by a chemical change?
a. calcium
b. potassium
c. sodium
d. sodium chloride
At STP, one mole of oxygen and one mole of neon contain equal numbers of
Answer:
D) particles but the oxygen has a greater mass.
Explanation:
Just took the test and got it right
At STP, one mole of oxygen and one mole of neon contain equal numbers of particles but oxygen has greater mass.
What is a mole?Mole is defined as the unit of amount of substance . It is the quantity measure of amount of substance of how many elementary particles are present in a given substance.
It is defined as exactly 6.022×10²³ elementary entities. The elementary entity can be a molecule, atom ion depending on the type of substance. Amount of elementary entities in a mole is called as Avogadro's number.
It is widely used in chemistry as a suitable way for expressing amounts of reactants and products.For the practical purposes, mass of one mole of compound in grams is approximately equal to mass of one molecule of compound measured in Daltons. Molar mass has units of gram per mole . In case of molecules, where molar mass in grams present in one mole of atoms is its atomic mass.
Learn more about mole,here:
https://brainly.com/question/26416088
#SPJ2
If the root word "derm” means "skin,” which of these words means "the study of skin diseases and treatment”? dermatologically dermatological dermatologist dermatology
Answer:
it would be dermatology
Explanation:
the first two dont make sense, and a dermatologist is the doctors themselves, so therefore dermatology is the study of it
A radical is a reactive intermediate with a single ___ electron, formed by ___ of a covalent bond. Allylic radicals are stabilized by_____, making them ___ stable than tertiary radicals. A compound that contains an especially weak bond that serves as a source of radicals is called a radical ____. Treatment of cyclohexene with N-bromosuccinimide in the presence of light leads to___ by ___ intermediates. The stability of a radical ____ as the number of alkyl groups bonded to the radical carbon increases. Although alkanes undergo radical substitution reactions with both Cl_2 and Br_2 chlorination is ___ than bromination. A compound that prevents radical reactions from occurring is called a radical ___ Treatment of cyclohexene with bromine in an organic solvent leads to ___ by ___ intermediates. Radical halogenation reactions occur ____ racemization at a stereogenic center.
Answer:
unpaired
homolysis
more
initiator
allylic substitution
radical
increases
faster
inhibitor
addition
ionic
with
Explanation:
The list of suitable words to be used to fill in the blank spaces in the sentences have been shown in the image attached.
A radical is any specie that contains an unpaired (odd) electron. Radicals are formed by homolysis of covalent bonds.
Due to the double bond involved in resonance, allylic radicals are more stable than tertiary radicals although stability of radical increases with the number of alkyl groups present. Initiators easily supply free radicals for radical reactions.
Addition reactions are faster with Cl2 than with Br2 because chlorine is more reactive than bromine. The addition of Br2 to cyclohexene occur via ionic mechanism and ionic intermediates.
Radical halogenation reactions occur with racemization at a stereogenic center.
