Answer:
a) Freezing and condensation
Explanation:
please mark me as brainliest
the half-life of uranium-232 is 69 years. If the nuclear byproduct contains uranium-232, it is not considered safe for human contact until 99.2% of it has been decayed. How long will this take
It will take approximately 480 years for 99.2% of uranium-232 to decay.
The formula of radioactive half-life = [tex]\frac{N}{N₀} = (\frac{1}{2})^{n}[/tex]
Where N = amount of isotope remaining
N₀ = original amount of isotope
n = number of half-lives
From the given values:
N = 100 5 - 99.2%
N = 0.8 % = 0.008
N₀ = 100% = 1
Substituting to find n
0.008/1 = (1/2)ⁿ
㏒₁₎₂0.008 = n
n = ㏒0.008/㏒(1/2)
n = 6.96
Therefore, number of half-lives n = 6.96
One half-life = 69 years
6.96 half-lives = 6.96 * 69 = 480.24 years
Therefore, it will take approximately 480 years for 99.2% of uranium-232 to decay.
learn more at: https://brainly.com/question/17070257
What is the mass grams that are in 3.52 × 10²⁵ molecules of I₂
Answer:
As you know, one mole of any substance contains exactly
6.022
⋅
10
23
molecules of that substance - this is known as Avogadro's number.
Notice that you're dealing with more than
6.022
⋅
10
23
molecules of carbon dioxide, which means that you'll also be dealing with more than one mole of the compound.
More specifically, you'll have
1.5
⋅
10
26
molecules
⋅
1 mole CO
2
6.022
⋅
10
23
molecules
=
2.491
⋅
10
2
moles CO
2
Now, a substance's molar mass tells what the mass of one mole of that substance is. In carbon dioxide's case, its molar mass is equal to
44.01 g/mol
, which means that every mole of
CO
2
will have a mass of
44.01 g
.
In your case,
2.491
⋅
10
2
moles of
CO
2
would have a mass of
2.491
⋅
10
2
moles CO
2
⋅
44.01 g
1
mole CO
2
=
109.63 g
Rounded to two sig figs, the number of sig figs you have for the number of molecules of
CO
2
, the answer will be
m
C
O
2
=
110 g
The ion with a +3 charge 28 electrons and mass number of 71
Answer:
gallium
Explanation:
Ga +++ as it is the only ion with that features
Are acids harmful to work with.
Answer:
yes it is
Explanation:
because there are some acid which really harm skin.
ANSWER THESE QUESTIONS PLEASE
No spam!! :/
Answer:
By definition, a pure substance or a homogeneous mixture consists of a single phase. A heterogeneous mixture consists of two or more phases. When oil and water are combined, they do not mix evenly, but instead form two separate layers.
Explanation:
Sorry only knew the answer to the first question
Answer:
To make a saturated solution, 36 gm of sodium chloride is dissolved in 100 gm of water at 293 K. Find its concentration at this temperature.
Mass per cent is a way of expressing a concentration or describing the component in a particular mixture. The solution composition can be expressed in mass percentage that depicts the mass of solute present in a given mass of solution.
The quantity of solute is expressed in mass or by moles. For a solution, the mass per cent is described as the grams of solute per grams of solution, multiplied by 100 to get the percentage.
Concentration
Mass of sodium chloride (Solute) = 36gm
Mass of water (solvent) = 100 gm
Mass of solution = 36+100
∴ Mass of solution = 136 gm
Concentration = (Mass of Solute / Mass of Solution) * 100
Concentration = (36/136) × 100
Concentration = 26.47%
Temperature
If temperature increases, solubility increases and if temperature decreases, solubility decreases.
It is possible to distinguish the particles of solute from those of solvent in a suspension, since particle size is bigger in suspensions, hence it is easier to distinguish the particles of solute.
Explanation:
Gimme the sandmeyer's reaction!!!
Explanation:
HERE IS YOUR ANSWER.....
The reaction between NO2 and co to produce no and CO2 is thought to occur in two steps:
Step 1: NO2 + NO2 → + NO + NO3
Step 2: NO3 + CO → NO2 + CO2
The experimental rate law is rate = k[NO2]2.
Required:
a. Write the equation for the overall reaction. do not include phase abbreviations.
b. Identify the intermediate(s).
Answer:
Correct option is
A
Explanation:
The number of molecules of CO involves in the slowest step will be 0 because CO is not involve in the slowest step i.e. rate determing step.
ort
Which is a primary alcohol?
0 3-pentanol
2-propanol
1-ethanol
4-octanol
urvey
Lig A Moving to another question will save this response.
Answer:
1 ethanol is right answer
Explanation:
CH3- CH2-OH
Compared to an atom of C-12, an atom of C-14 has
A) fewer protons
C) more neutrons
B) fewer neutrons
D) more protons
Explanation:
Carbon-12 atoms have stable nuclei because of the 1:1 ratio of protons and neutrons.
Carbon-14 atoms have nuclei which are unstable. C-14 atoms will undergo alpha decay and produce atoms of N-14. Carbon-14 dating can be used to determine the age of artifacts which are not more than 50,000 years old.
Calculate the mass of naphthalene required to react stoichiometrically with the moles of 2-bromo-2-methylpropane that you have placed in the flask. Dispense that quantity of naphthalene into the weighing dish. There is some imprecision in delivering the powder onto the weigh boat, but a mass within 0.040 g of the calculated stoichiometric quantity will be sufficient for this experiment. Note that you can use a combination of the 1 g and the 0.1 g buttons to add the required mass. If you overshoot the goal, you can discard the weighing boat and get a new one. RECord the sample mass dispensed below. mass of naphthalene (g)
The reaction of 2-bromo-2-methylpropane and naphthalene is stoichiometrically in a mole ratio of 1:1.
Notice that in the question, the moles of 2-bromo-2-methylpropane placed in the flask wasn't mentioned. if I assume that it was 1.24 moles then;
1 mole of naphthalene reacts with 1 mole of 2-bromo-2-methylpropane
x moles of naphthalene reacts with 1.24 mole of 2-bromo-2-methylpropane
x = 1 * 1.24/1
= 1.24 moles of naphthalene
Molar mass of naphthalene = 128.2 g/mol
Mass of naphthalene = 128.2 g/mol * 1.24 moles of naphthalene
Mass of naphthalene =159 g
For more about how to solve stoichiometry problems:
https://brainly.com/question/1309057
Draw Lewis structures to show how H+ is transferred when HNO₂ and NH₃ react with each other. The Lewis structure of HNO₂ is:
Attached are the Lewis structures:
Hope it helps...
[tex] \: \: \: [/tex]
how many atoms of hydrogen and oxygen are present in 5 gm of HNO3
ANSWER: note the amounts of atoms of all the component in HNO3, which are 1 atom of hydrogen, 1 atom of nitrogen and 3 atom of oxygen.
Help please due tomorrow
Answer:
3rd option - humans chose the potential parents for crosses based on desired characteristics.
Explanation:
Artificial selection is the identification by humans of desirable traits in plants and animals, and the steps taken to enhance and perpetuate those traits in future generations.
How are all planets in the solar system similar?
A. They have a gas atmosphere.
B. They have a water atmosphere.
C. They have a gas-surface composition.
D. They have a rock surface composition.
THIS IS FOR SCIENCE!!!!!!
PLEASE HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Answer:
They have a rock surface composition.
Explanation:
I hope this will help you
What is the Equation of Reduction in Mg+F2 gives MgF2, I WILL MARK YOU AS BRAINLIST
Answer:
Mg+F2= Mgf2
Explanation:
F 2 is an oxidizing agent, Mg is a reducing agent. ; Pale-yellow to greenish gas with a pungent, irritating odor.
Which of the following has the greatest effect on colligative properties?
A. Calcium chloride (CaCl2)
B. Sodium chloride (NaCl)
C. Aluminum Nitrate (Al(NO3)3)
D. Epsom salt (MgSO4)
Answer:
C. Aluminum Nitrate (Al(NO3)3)
Explanation:
This is because, when Aluminium nitrate dissolves in water, it dissociates to form four ions ( one aluminium ion and three nitrate ions ). Since colligative property depends on number of particles or ions present ( roult's law ), this will create much effect.
[tex]Al(NO _{3} )_{3(aq)} → Al {}^{3 + } _{(aq)} + 3NO {}^{ - } _{(aq)}[/tex]
Answer:
aluminum nitrate (Al(NO3)3)
it has the greatest effect on collimation properties .
Explanation:
(c) is correct option
The surface of silver metal, Ag(s), became tarnished when it was exposed to oxygen, producing Ag2O. In Ag2O, the oxidation state of silver is 1. According to this information, silver metal was _____. Please choose the correct answer from the following choices, and then select the submit answer button. Answer choices reduced
Answer: The silver metal was OXIDIZED.
Explanation:
OXIDATION is defined as loss of electrons and increase in oxidation number of an atom.
Oxidation number is the charge on an ion in an ionic compound or the charge that an atom in a covalent compound would have it it were ionic. There are basic rules governing oxidation number, they include:
--> the oxidation number of elements in their free states is ZERO. Example O2, Cl2,Na, Al, Ag.
-->The oxidation number for an ion is the same as the size and sign of the charge on the ion. For example the oxidation number of Zn2+ is +2.
--> the sum of all the oxidation numbers of the elements in a compound is zero.
--> oxidation numbers are always written with either a positive or a negative sign.
On the other hand, reduction is the opposite of oxidation. As oxidation is taking place, reduction is also taking place. Reduction involves:
--> Gain of electron and
--> decrease in oxidation number
From the question, the silver metal had ZERO as it's oxidation number because it's in free state. After being exposed to oxygen to form silver oxide, the oxidation number became +1.
Since there is an increase in the oxidation number, the silver metal was OXIDIZED
At a constant temperature, a sample of gas occupies 1.5 L at a pressure of 2.8 ATM. What will be the pressure of this sample, in atmospheres, if the new volume is 0.92 L?
Using boyles law
[tex]\boxed{\sf v\propto \dfrac{1}{p}}[/tex]
[tex]\\ \sf\longmapsto P_1V_1=P_2V_2[/tex]
[tex]\\ \sf\longmapsto P_2=\dfrac{P_1V_1}{V_2}[/tex]
[tex]\\ \sf\longmapsto P_2=\dfrac{2.8\times 1.5}{0.92}[/tex]
[tex]\\ \sf\longmapsto P_2=\dfrac{4.2}{0.92}[/tex]
[tex]\\ \sf\longmapsto P_2=4.56atm[/tex]
[tex]\\ \sf\longmapsto P_2\approx 4.6atm[/tex]
Answer:
[tex]\boxed {\boxed {\sf 4.6 \ atm}}[/tex]
Explanation:
We are asked to find the new pressure given a change in volume. We will use Boyle's Law, which states the volume of a gas is inversely proportional to the pressure. The formula for this law is:
[tex]P_1V_1= P_2V_2[/tex]
Initially, the gas occupies 1.5 liters at a pressure of 2.8 atmospheres.
[tex]1.5 \ L * 2.8 \ atm = P_2V_2[/tex]
The volume is changed to 0.92 liters, but the pressure is unknown.
[tex]1.5 \ L * 2.8 \ atm = P_2* 0.92 \ L[/tex]
We are solving for the final pressure, so we must isolate the variable P₂. It is being multiplied by 0.92 liters. The inverse operation of multiplication is division, so we divide both sides by 0.92 L.
[tex]\frac {1.5 \ L * 2.8 \ atm}{0.92 \ L} = \frac{P_2* 0.92 \ L}{0.92 \ L}[/tex]
[tex]\frac {1.5 \ L * 2.8 \ atm}{0.92 \ L}= P_2[/tex]
The units of liters cancel each other out.
[tex]\frac {1.5 * 2.8 \ atm}{0.92 }=P_2[/tex]
[tex]\frac {4.2}{0.92} \ atm= P_2[/tex]
[tex]4.565217391 \ atm = P_2[/tex]
The original measurements of pressure and volume have 2 significant figures, so our answer must have the same. For the number we calculated, that is the tenths place. The 6 in the hundredth place tells us to round the 5 up to a 6.
[tex]4.6 \ atm \approx P_2[/tex]
The pressure is approximately 4.6 atmospheres.
How many grams of Br are in 445 g CaBr2 ?
Explanation:
The mass of bromine is 79.904, and since there are two of them in the Calcium Bromide molecule, we'll multiply it by 2 to get 159.808. Dividing that by the full mass of the molecule then multiply it by 100 will give you the answer.
Determine the number of hydrogen atoms connected to each carbon atom: The bond-line structure of a compound has a SMILES string of CC1CCN(CC1N(C)C2=NC=NC3=C2C=CN3)C(=O)CC#N. All the carbon atoms of the compound are highlighted and labeled a through p.
Answer:
dsgsdfd
Explanation:
PLEASE HELP!!
this is on USAtestprep
a)
b)
c)
d)
cuales son las caracteristicas de el livermorio
Answer:
Livermorium is a radioactive, artificially produced element about which little is known. It is expected to be a solid and classified as a metal. It is a member of the chalcogen group. Livermorium has four isotopes with known half-lives, all of which decay through alpha decay
Which substance will sublimate when in the solid phase at room temperature and pressure?
Select the correct answer below:
A) carbon dioxide
B) water
C) mercury
D) helium
Answer:
I think carbon dioxide is right answer
1. Consider the following thermochemical reaction for kerosene:
2 C12H26(l) + 37 O2(g) 24 CO2(g) + 26 H2O(l) + 15,026 kJ
(a) When 21.3 g of CO2 are made, how much heat is released?
(b) If 500.00 kJ of heat are released by the reaction, how grams of C12H26 must have been consumed ?
(c) If this reaction were being used to generate heat, how many grams of C12H26 would have to be reacted to generate
enough heat to raise the temperature of 750g of liquid water from 10oC to 90oC?
2. Consider the reaction: NaNO3(s) + H2SO4(l) → NaHSO4(s) + HNO3(g) ΔH° = 21.2 kJ
How much heat must absorbed by the reaction system to convert 100g of NaNO3 into NaHSO4(s)?
3. What is the enthalpy change when 49.4 mL of 0.430 M sulfuric acid reacts with 23.3 mL of 0.309 M potassium
hydroxide?
3.
H2SO4(aq) + 2KOH(aq) → K2SO4(aq) + 2H2O(l) ΔH° = –111.6 kJ/mol
do you have the specific heat for part 2?
Sodium ethoxides are made by direct reaction of:
a. Sodium hydroxide and dry ethanol
b. Sodium metal and 70% ethanol
c. Sodium hydroxide and 70% ethanol
d. Sodium metal and dry ethanol
Answer:c
Explanation:
Classify the following oxides as acidic, basic, amphoteric, or neutral:
(a) Select the acidic oxides:
A. CO₂
B. N₂O₅
C. Al₂O₃
D. NO
E. SO₃
(b) Select the basic oxides:
A. CaO
B. CO
C. SO₃
D. K₂O
E. BaO
(c ) Select the amphoteric oxides:
A. K₂O
B. Al₂O₃
C. CaO
D. CO₂
E. SnO₂
d) Select the neutral oxides:
A. CO
B. NO
C. SNO₂
D. N₂O₅
E. BaO
Answer:
(a).
» E. SO₃, sulphur trioxide.
(b).
» A. CaO, Calcium oxide.
» D. K₂O, potassium oxide.
» E. BaO, barium oxide.
(c).
» B. Al₂O₃, Aluminium oxide.
» E. SnO₂, tin (IV) oxide.
(d).
» A. CO, carbon monoxide.
» B. NO, nitrogen monoxide.
Explanation:
[tex]{ \underline{ \sf{ \blue{christ \:† \: alone }}}}[/tex]
A student records the time it takes for her pet rabbit to make it through a maze to a carrot. In one test, she has the
rabbit try to find the carrot at 8:00 AM after eating its first by meal of the day. In the other test, the rabbit tries to find the
carrot at 8:00 AM without having eaten its first meal of the day.
In this experiment, which variable is the outcome variable?
A. the time required to finish the maze
B. whether or not the rabbit finds the carrot
C. whether the rabbit is hungry or not
D. the time of day when the rabbit starts the maze mi
Answer:
The time required to finish the maze
The time required to finish the maze is the outcome variable of this experiment.
WHAT IS AN OUTCOME VARIABLE?
An outcome variable, also known as dependent variable or response variable, is the variable that the experimenter measures or records in the experiment. The outcome variable responds to changes made to the independent variable, hence, the outcome variable is dependent on the independent variable.In this question, a student conducts an experiment to determine the time it will take her pet rabbit to make it through a maze to a carrot.
She records the time it took the rabbit to finish the maze for each of the test. Hence, the outcome variable in this experiment is the time required for the rabbit to finish the maze.Learn more: https://brainly.com/question/19016612
How many shapes contains the same text: KTKEIHLPEQMKJAPDEK
In this figure, four shapes contains the same text as in the red oval. The text given in the red oval is KTKEIHLPEQMKJAPDEK.
What is shape?Shape is "the form of an object or its outline, outer boundary or outer surface".
What is text?Text is "a collection of words or letters that are understandable by the reader".
What is an oval?Oval is a rounded and slightly elongated outline or shape like that of an egg.
Hence, four shapes contains the same text as in the red oval.
To learn more about oval here
https://brainly.com/question/24323155
#SPJ2
What happens during the fourth stage of technological design that is not necessary during the sixth or seventh stages of scientific investigation?
A design is remodeled after analysis and tested again.
An initial design is implemented and analyzed to gather data.
Conclusions are made and communicated to others.
Criteria are stated to help judge the success of the process.
Answer:
a design is remodeled after analysis and tested again
Explanation:
PLEASE HELP! A machine uses filtration to separate a component from orange juice. Which component does the machine most likely separate from the mixture?
A - Pigment
B - Sugar
C - Pulp
D - Water
Answer: c
Explanation: Filtration is technically defined as the process of separating suspended solid matter from a liquid
Pulp is a lignocellulosic fibrous material prepared by chemically or mechanically separating cellulose fibers from wood, fiber crops .
Many commercial juices are filtered to remove fiber or pulp.
The correct answer is C, Pulp.
Orange is an example of a citrus fruit. Every citrus fruit has a pulp. The of pulp a citrus fruit is that stringy content in the endocarp of the fruit .
The pulp of a citrus fruit is where its juice is found.
When you want to prepare orange juice, you need to remove the pulp of the citrus fruit. This is done by filtering out the pulp from the juice.
Filtration is the process of removing larger particles. For a liquid juice, filtration is the process of removing solid particles from the orange juice.
https://brainly.com/question/11403039
