Which of the following oxides is amphoteric oxide?
A)Na2O
B)Al2O3
C)MgO
D)SO2

Answer:

62L

.

.

.

.

tysm.

.

.

.

.

hope it help

Answer:

because the load arm is greater than the effort arm. As we know that when the load arm is greater than the effort arm, the mechanical advantage will always be lesser than one, which results in gain in speed

Answer:

Hi! hopefully this helps you

Explanation:

You can make a buffer solution for a specific pH (potential of hydrogen) by mixing together a weak acid like acetic acid HC2H3O2 with a salt that contains the conjugate base like sodium acetate NaC2H3O2. A neutralization reaction would occur as you are mixing a weak acid and a strong base.

When you add the base to an acidic solution, the solution becomes less acidic and moves toward the middle of the pH scale. Aka neutralization

Hope this helps! best of luck <3

Answer:

It is right or wrong I cannot say if it is wrong forgive me.

Answer:

The energy in the system will likely be exchanged, but the matter will not be exchanged.

Explanation:

According to the first law of thermodynamics, also known as Law of Conservation of Energy, energy can neither be created nor destroyed; energy can only be transferred or changed from one form to another. The law of conservation of mass also states that for any system closed to all transfers of matter and energy, the mass of the system must remain constant over time, as the system's mass cannot change.

Answer:

The volume of NO is 22.4L at STP

Explanation:

Based on the reaction:

2NH3 + 5/2O2 → 2NO + 3H2O

2 moles of NH3 react with 5/2 moles of O2 to produce 2 moles of NO.

To solve this question, we need to find the moles of each reactant in order to find the limiting reactant as follows:

Moles NH3 -Molar mass: -17.01g/mol-

Using PV = nRT

PV/RT = n

Where P is pressure = 1atm at STP

V is volume = 22.4L

R is gas constant = 0.082atmL/molK

T is absolute temperature = 273.15K

1atm*22.4L/0.082atmL/molK*273.15K = n

n = 1.00 moles of NH3

For a complete reaction of 1.00 moles of NH3 are needed:

1.00 moles NH3 * (5/2moles O2 / 2moles NH3) = 1.25 moles of O2

As there are 1.406 moles of O2, the limiting reactant is NH3

The moles of NO produced are the same than moles of NH3 because 2 moles of NH3 produce 2 moles of NO. The moles of NO are 1.00 moles

And as 1.00moles of gas are 22.4L at STP:

Answer:

option b

Explanation:

answer from gauth math

Answer:

The answer for ka is 5.26x10^-5

Explanation:

Fill in 5.26x10^-5

Answer:

67.3g

Explanation:

%(w/w) = mass of solute/total mass of solution × 100

According to this question, an aqueous solution contains 32.7% KCl (w/w%). Firstly, we find the mass of the solute (KCl) as follows, if the mass of solution is 100g:

32.7 = mass of solute/100 × 100

mass of solute (KCl) = 32.7g

Mass of solution = mass of solvent (water) + mass of solute (KCl)

100g = x + 32.7g

x = 100 - 32.7

x = 67.3

Hence, the mass of water contained in the 100g solution is 67.3g.

Answer: Im not sure but I think it is false.

Explanation:

Answer:

5

Explanation:

The atomic number is the number of protons in an atom. Protons are the positively charged particles in the nucleus. The number of protons define the identity of an element. An element with 5 protons is Boron, no matter how many neutrons may be present.

The atomic number of the atom shown in the diagram is 5.

The atomic number of an element refers to the number of protons in the nucleus of its atoms. It uniquely identifies an element and determines its chemical properties.

In the diagram, there are 5 proton numbers in the nucleus of the atom. In other words, this means that the atomic number of the atom is 5.

More on atomic numbers can be found here: https://brainly.com/question/14190064

#SPJ3

Answer:

Option a is a solution acidic ([OH⁻] = 7.0x10⁻⁹ M).

Explanation:

To know if a solution is acidic we need to calculate the pH and it must be lower than 7. A value of pH equal to 7 is a neutral solution and a solution with a pH value higher than 7 is a basic solution.

a. For the [OH⁻] = 7.0x10⁻⁹ M we have:

[tex] pOH = -log[OH^{-}] = -log(7.0 \cdot 10^{-9}) = 8.15 [/tex]

Now, the pH is:

[tex] pH + pOH = 14 [/tex]

[tex] pH = 14 - pOH = 14 - 8.15 = 5.85 [/tex]

This solution is acidic (pH < 7)

b. [H₃O⁺] = 8.5x10⁻⁸ M

[tex] pH = -log(8.5 \cdot 10^{-8}) = 7.07 [/tex]

This is not an acidic solution. Is a neutral one (pH around to 7).

c. [OH⁻] = 2.5x10⁻⁶ M

[tex] pOH = -log[OH^{-}] = -log(2.5 \cdot 10^{-6}) = 5.60 [/tex]

Then, the pH is:

[tex]pH = 14 - pOH = 14 - 5.60 = 8.40[/tex]

Hence, this is not an acidic solution. It is basic (pH > 7).    

Therefore, option a is a solution acidic ([OH⁻] = 7.0x10⁻⁹ M).

I hope it helps you!

Answer:

2KMnO₄ (aq) + 10KBr (aq) + 8H₂SO₄ (aq) -> 2MnSO₄ (aq) + 5Br₂ (aq) + 6K₂SO₄ (aq) + 8H₂O (l)

oxidizing agent = KMnO₄

reducing agent = KBr

Explanation:

KMnO₄ -> 2Mn⁷⁺ + 10e⁻ = 2Mn²⁺

KBr -> 10Br⁻⁺ - 10e⁻ = 10Br⁰

Answer:

A

Explanation:

Answer:

fusion is what fuels the burning of the sun,it's the combining of light elements into heavier elements to produce energy.the sun produces a large amount of energy by combining very light elements with heavier elements.

I hope this helps

Answer:

C) the study of the composition of the atom.

Explanation:

A research can be defined as a systematic investigation or careful consideration of study with respect to a particular problem using scientific methods such as collection of data, documenting critical information, analysis of data, and the establishment of facts in order to reach new conclusions.

Similarly, a basic research is an approach to research that's typically theoritical and it's aimed at developing a theory, searching for the truth or gain a better understanding about a phenomenon, subject, or basic laws on nature.

In this context, an example of basic research is the study of the composition of the atom.

An atom can be defined as the smallest unit comprising of matter that forms all chemical elements. Thus, atoms are basically the building blocks of matters and as such determines or defines the structure of a chemical element.

Generally, atoms are typically made up of three distinct particles and these are protons, neutrons and electrons.

Answer: Water is SUPER soluble and regarded as an universal solvent because it is polar in nature and dissolves most inorganic solutes and some polar organic solutes to form aqueous solutions.

Explanation:

WATER is a substance which is composed of the elements such as hydrogen and oxygen that are combined in the ratio of 2:1. The physical properties of water include:

--> it is a colourless, odourless and tasteless liquid and

--> the boiling point of water is 100°C(this is due to the presence of hydrogen bonding).

The solubility of a solute in a solvent at a particular temperature is the maximum amount of solute in moles or grams that will saturate 1000 dm³ or grams of the solvent.

Water is regarded as a universal solvent BECAUSE it is capable of dissolving many substances. This solubility helps maintain different processes in life such as acting as the solvent which helps cells transport and use substances like oxygen or nutrients.

The answer to your question the equation of the line BC is C [tex]-7x - 5y = -48[/tex]

Since AB and BC form a right angle at point B, it means that AB is perpendicular to BC.

To find the equation of BC, we first need to find the gradient of BC.

Let m be the gradient of AB and m' be the gradient of BC, since AB is perpendicular to BC, mm' = -1. Thus m' = -1/m

So, we need to find the gradient of AB and thus find the gradient of BC.

To find the gradient of AB, we use the equation for the gradient of a line in slope-point form. Having point A = (x₁, y₁) = (-3, -1) and point B = (x₂, y₂) = (4, 4).

[tex]m = \frac{y_{2} - y_{1} }{x_{2} - x_{1}}[/tex]

Substituting the values of the variables into the equation, we have

[tex]m = \frac{4 - (-1) }{4 - (-3)}[/tex]

[tex]m = \frac{4 + 1 }{4 + 3}[/tex]

[tex]m = \frac{5}{7}[/tex]

Since m' = -1/m

m' = -1 ÷ 5/7

m' = -7/5

Since we know the gradient of the line BC and the line BC passes through the point B = (4, 4) = (x₂, y₂) we find the equation of the line BC using the equation of a line in slope-point form.

[tex]m' = \frac{y - y_{2} }{x - x_{2}}[/tex]

[tex]-\frac{7}{5} = \frac{y - 4 }{x - 4}[/tex]

cross-multiplying, we have

[tex]-7(x - 4) = 5(y - 4)[/tex]

Expanding the brackets, we have

[tex]-7x + 28 = 5y - 20[/tex]

Subtracting 28 from both sides, we have

[tex]-7x = 5y - 48[/tex]

Subtracting 5y from both sides, we have

[tex]-7x - 5y = -48[/tex]

So, the equation of the line BC is [tex]-7x - 5y = -48[/tex]

The answer to your question the equation of the line BC is C [tex]-7x - 5y = -48[/tex]

Learn more about the equation of a line here:

https://brainly.com/question/12851029

Answer:

its C

Explanation:

Answer: B. The Pauli exclusion principle.

Explanation: Founders Educere answer ;)

Answer:

The mineral forms gas bubbles when a sample is stored in water

Answer:

High temperature and low pressure

Explanation:

According to the kinetic molecular theory, gases are composed of small particles called molecules which are in constant motion.

At high temperature and low pressure, gas molecules possess high kinetic energy and move at high velocities hence intermolecular interaction is almost none existent and real gases approach the behavior of ideal gases.

Answer:

B

Explanation:

Answer:

They will be considered ions of the same element.

Explanation:

Ions form from elements when they gain or loss an electron, causing the number of protons (positively charged) to be unequal to the number of electrons (negatively charged), resulting in a net charge.

If there are more electrons than protons (from an element gaining 1 or more electrons), the ion is negatively charged and is called an anion.

If there are more protons than electrons (via the loss of electrons), the ion is positively charged and is called a cation.

Answer:

Requires two Mg²⁺ cofactors and as such demonstrates metal-ion catalysis

Explanation:

Electrostatic catalysis or metal ion catalysis is a catalytic mechanism that makes use of metalloenzymes, such as enolase along with a metal ion which is bound tightly, including, Mo⁶⁺, Ni³⁺, Co³⁺, Mn²⁺, Zn²⁺, Cu²⁺, and Fe²⁺, to undertake a catalysis

For maximal activity, enolase requires the presence of 2 equivalent metal ions in each site which is active

Therefore, the correct option is; requires two Mg²⁺ cofactors and as such demonstrates metal-ion catalysis

answer is wildlife sanctuary

Answer:

a wildlife sanctuary

Explanation:

Answer:  1)  temperature, 2) add a catalyst, and 3) concentrations

Explanation:  A rise in temperature adds kinetic energy to the reactants, leading to more frequent, and energetic collisions, which will often accelerate the reaqction.  A catalyst is an agent that helps the reaction move forward more quickly by offering a substrate that aids in orienting the reactants for more efficient reaction.  A higher concentration increases the chances of collisons that result in products.

Answer: Newton's Third Law of Motion.

Explanation:

Newton's Third Law of Motion simply states that every action force creates a reaction force and then, this reaction force will be equal in strength and opposite in direction.

The statement simply implies that in every interaction, there will be a pair of forces that is acting on the two interacting objects. An example of Newton's third law of motion can be seen when a person jumps, thenlegs of the person will apply a force to the ground which will then propel the person into the air.

Answer:

B

Explanation:

the digestive system

The option which isn't a result of surface tension in water is: c. surface area is maximized.

Water can be defined as a liquid molecule that comprises the chemical element hydrogen and oxygen in the ratio of two to one (2:1).

Surface tension can be defined as a property of liquid such as water, which makes its surface to resist an external force due to the cohesive nature of its molecules.

This ultimately implies that, the surface tension of a liquid is mainly as a result of the cohesive forces existing between its molecules.

Generally, the surface tension of water is typically higher than the surface tension of most liquids.

Due to the effect of surface tension in water;

Additionally, the surface tension of a liquid such as water can be described as an inward force which tends to minimize its surface area rather than maximize its surface area.

In conclusion, surface tension in water doesn't maximize its surface area.

Find more information: https://brainly.com/question/11348644

Answer:

Ver explanación e imagen adjunta.

Explanation:

El compuesto se conoce generalmente como N, N-dietilbenzamida.

Es una amida porque tiene la fórmula general RCONR.

La molécula se llama N, N-dietil benzamida porque los dos grupos etilo están unidos al átomo de nitrógeno como se muestra en la molécula.