Answer:
C
Explanation:
This is because oxygen has the lowest temperature, thereby collision rate is least
Which electron configuration matches this model?
0 1s22s2p2
0 1s²2s2p3
O 1s²2s²2p4
1s22s²2p5
Answer:
1s2 2s2 2p5
is the correct answer
Explanation:
Hi there!
From the figure;
We can figure out that the atomic number is 7.
So;
Option A: 1s² 2s² 2p²
Sum of the powers of variable is just 6. So, it's not answer.
Option B: 1s²2s²2p³
Sum of the powers of variable is 7. So it's the answer
Option C: 1s²2s²2p⁴
Sum of the powers of variable is 8. So, it's not answer.
Option D: 1s²2s²2p⁵
Sum of the powers of variable is 9. So, it's not the correct answer.
Therefore, answer is option B.
Hope it helps!
milk has a pH of 6.0 and household ammonia has a pH of 12.0. How much more acidic is milk than ammonia
60 I think bcz if there is 1&2 they differ 10 times
The milk has a pH of 6.0 and household ammonia has a pH of 12.0. then milk will be 6 times milk acidic than ammonia.
What is pH?The pH scale, which previously stood for "potential of hydrogen," would be used to describe how acidic or basic an aqueous solution is.
What is an acidic solution?More hydrogen ions are present in an acidic solution than it was in pure water.
It is given then,
[tex](milk)pH_{1} = 6\\(ammonia)pH_{2} = 12[/tex]
The concentration of hydrogen ions can be calculated by using the formula:
[tex][H^{+}] = 10^{-pH}[/tex]
By putting the value of given data in the above equation.
[tex][H^{+}_{milk} ] / H^{+}_{ammonia}= 10^{-6}/10^{-12}\\ = 10^{6} = 6[/tex]
We get that, milk will be 6 times more acidic than ammonia.
To know more about pH and acidic solutions
https://brainly.com/question/15289741
#SPJ2
2.5
Nakula investigated the effect of heat on amylase. Amylase is an enzyme
that makes starch molecules break down into sugar molecules.
P
• Nakula put some amylase solution into two boiling tubes,
P and Q
• He boiled the solution in tube P. He did not heat tube Q.
• He waited until the solution in tube P had cooled down to
room temperature.
• He added equal volumes of starch solution to tube P and
boiled amylase amylase
• After 10 minutes, he tested both tubes for sugar.
and starch and starch
• Nakula found that there was sugar in tube Q. but not in tube P.
The structure of amylase deteriorates due to high temperature of the solution.
This experiment shows that the structure of amylase deteriorates due to high temperature which prevents this amylase from performing its function properly.
At high temperatures the amylase will break starch down very slowly or not at all due to denaturation of the enzyme's active site due to which it can't perform its function properly so we can conclude that high temperature denatures amylase enzyme.
https://brainly.com/question/24323388
Nakula's conclusion was- "My results show that boiling destroys amylase"
Amylase is an enzyme that breaks down starch molecules into sugar molecules. He boiled the solution in tube P, and when he checked tube P for sugar, there wasn't any. He didn't boil the solution in tube Q and he found sugar in it.
Amylase had broken down starch molecules to sugar molecules in tube Q. Tube P's solution had been boiled, and this showed that when he boiled it, it destroyed the amylase, that is why the starch molecules hadn't been broken down into sugar molecules.
Identify the compound with ionic bonds.
CO
H2O
Ne
KCl
O2
Answer:
CO =Coordinate Covalent Bond ,H2O = Water , NE= Nickel or Neon ,KCL=Potassium Chloride and O2 = Water
Explanation:
hope you wiill get help from me please follow me
Isotopes are: A. are only theoretical. B. only formed in laboratories. C. found in nature. D. found in the nuclear reactions in stars but not on Earth.
Answer:
B. only formed in laboratories
Explanation:
i know
Isotopes are only formed in Laboratories. hence, Option (B) is correct.
What are Isotopes ?
Each of two or more forms of the same element that contain equal numbers of protons but different numbers of neutrons in their nuclei, and hence differ in relative atomic mass but not in chemical properties; in particular, a radioactive form of an element is known as Isotope.
Isotopes are two or more types of atoms that have the same atomic number and position in the periodic table, and that differ in nucleon numbers due to different numbers of neutrons in their nuclei.
Therefore, Isotopes are only formed in Laboratories. hence, Option (B) is correct.
Learn more about Isotopes here ;
https://brainly.com/question/12955625
#SPJ2
Write chemical equations to show how the following bases react with water to produce hydroxide ions:
c. Imidazole (C₃H₄N₂), a weak base
d. Sulfite ion (SO₃²⁻), a weak base
Solution:-1
[tex]\boxed{\sf {C_3H_4N_2\atop imidazole}+{H_2O\atop water}\longrightarrow {C_3H_5N_2\atop Imidazolium}+{OH^-}}[/tex]
There can be another
[tex]\boxed{\sf {C_3H_4N_2\atop imidazole}+{H_2O\atop water}\longrightarrow {C_3HN_2\atop Dicyanomethanoide}+{H_3O^+}}[/tex]
Solution:-2:-
[tex]\boxed{\sf {SO_3^{2-}\atop Sulphate\:ion}+{H_2O\atop Water}\longrightarrow {H_2SO_4\atop Sulphuric\:acid}}[/tex]
a team of engineers has decided to design a new shoe for people suffering from a painful foot condition. What should the engineers do during the planning stage
team of engineers has decided to design a new shoe for people suffering from a painful foot condition. What should the engineers do during the planning stage
Describe ask a question in in sincence
Answer:
why do we dream
Explanation:
What can be found on the periodic table?
A. the name of molecules formed by the element
B. the number of isotopes an element has
C. the date an element was discovered
D. the number of protons an element has
Answer:
I think the answer is..
The name of molecules formed by the element.
I hope it will help you !
Cho biết độ tan của NH4Cl trong nước ở 20oC và 70oC lần lượt là 37,2 g/100 gam nước và 60,2 gam/100 g nước. Hòa tan 166,8 gam NH4Cl vào 400 gam nước ở 70oC thu được dung dịch X. Sau đó, hạ nhiệt độ dung dịch X xuống 20oC. Tính khối lượng (gam) NH4Cl kết tinh lại trong X?
Answer: Hợp chất CTHH 0 °C 10 °C 20 °C 30 °C 40 °C 50 °C 70 °C
Actini(III) hydroxide Ac(OH)3 0,0022
Amonia NH3 1176 900 702 565 428 333 188
Amoni azua NH4N3 16 25,3 37,1
View 42 more rows
hehe
a. You have a stock solution of 14.8 M NH3. How many milliliters of this solution should you dilute to make 1000.0 mL of 0.250 M NH3?
b. If you take a 10.0 mL portion of the stock solution and dilute it to a total volume of 0.500 L, what will be the concentration of the final solution?
Answer:A) V = 16.892 ml
Explanation:
M1 * V1 = M2 * V2
14.8 M * V1 =0.250 M * 1000 ml
V1 = 16.892 ml
a. The volume of 16.89 milliliters of the stock solution of 14.8 M should be diluted to make 1000.0 mL of 0.250 M.
b. The concentration of the final solution is 0.296 M.
What is the dilution law?The concentration or the volume of the concentrated or dilute solution can be calculated by using the equation:
M₁V₁ = M₂V₂
where M₁ and V₁ are the concentration and volume of the concentrated solution respectively and M₂ and V₂ are the concentration and volume of the dilute solution.
A stock solution is a solution that has a high concentration and that will be diluted to a low concentration by the addition of water in it.
Given, a stock solution of concentration, M₁ = 14.8 M
The concentration of the diluted solution, M₂ = 0.250 M
The volume of diluted solution, V₂ = 1000ml
Substitute the value of the molarity and volume in equation (1):
(14.8)× (V₁) = (1000) × (0.250)
V₁ = 16.89 ml
Similarly, for part (b): M₁ = 14.8 M, V₁ = 10 ml and V₂ = 0.5L = 500 ml
(14.8)× (10) = (500) × (M₂)
M₂ = 0.296 M
Learn more about dilution law, here:
https://brainly.com/question/15718488
#SPJ5
What is the state of water at room temperature? Please someone help thank you
it is in a liquid state
in room temperature
Answer:
liquid state
Explanation:
water is liquid at room temperature because of the many weak hydrogen bonds that holds its molecules together in small fractions of second
What happens as energy from sun warms the earth unevenly?
Answer:
Solar heating of the Earth's surface is uneven because land heats faster than water, and this causes air to warm, expand and rise over land while it cools and sinks over the cooler water surfaces.This differential heating is passed on to the air above by conduction which causes air expansion and changes in pressure.
Three bonding pairs around a central atom results in a ________. A. octahedral B. trigonal planar compound C. tetrahedral compound D. linear compound
Answer:
B
Explanation:
because it is a trigonal planar compound
Three bonding pairs around a central atom results in a trigonal planar compound. Option B is correct.
In a trigonal planar arrangement, the central atom is surrounded by three bonding pairs of electrons, forming a flat, triangular shape. The bond angles between the bonding pairs are approximately 120 degrees.
This molecular geometry is observed when a molecule has a central atom with three bonded pairs and no lone pairs. Examples of compounds with trigonal planar geometry include boron trifluoride (BF₃) as well as formaldehyde (H₂CO).
The other options are not correct for a molecule with three bonding pairs;
Octahedral refers to a molecular geometry with six bonding pairs around a central atom.
Tetrahedral corresponds to a molecular geometry with four bonding pairs around a central atom.
Linear represents a molecular geometry with two bonding pairs around a central atom.
Hence, B. is the correct option.
To know more about bonding pairs here
https://brainly.com/question/32421783
#SPJ2
Oxide is a combination of oxygen and another element. So is Water an oxide?
Answer:
Yah, it's a neutral oxide
Explanation:
[tex]{ \bf{2H_{2(g)} +O_{2(g)} \: →2H _{2}O _{(l)} }}[/tex]
A nitrogen ion has a mass of 14 and a charge of +2. Which subatomic particles does it contain? (1 point)
O 2 protons, 6 neutrons, and 6 electrons
O 7 protons, 7 neutrons, and 5 electrons
O 4 protons, 4 neutrons, and 6 electrons
o 7 protons, 7 neutrons, and 9 electrons
Answer:
7 protons, 7 neutrons, and 5 electrons
Explanation:
the formula for atomic weight=no.of protons + no. of electrons this shortens the options into b or d and second part says that the ion has charge +2 which means it has lost two electrons. so no. of electrons=no.of electrons in nitrogen atom - 2=5.
Nitrogen ion with a charge of +2 has 7 protons, 7 neutrons, and 5 electrons
Explanation:
To obtain the right answer to the question, we must determine the number of proton, neutron and electron of nitrogen ion. This can be obtained as illustrated follow.
Step 1:Data obtained from the question.
Mass number = 14
Charge = +2
Step 2:Determination of the number of proton.
The atomic number of an element is simply the number of protons in the atom of the element.
Atomic number of nitrogen = 7
Thus, the proton number of nitrogen is 7.
NOTE: The atomic number of an element does not change be it atom or ion, it remains the same.
Therefore the proton number of nitrogen ion is 7
Step 3:Determination of the number of neutron
Mass number = 14
Proton number = 7
Neutron number =?Mass number = Proton + Neutron
14 = 7 + Neutron
Collect like terms
14 – 7 = Neutron
Neutron = 7Step 4Determination of the number of electrons.
Charge = +2
Proton number = 7
Electron number =?Charge = Proton – Electron
+2 = 7 – Electron
Collect like terms
2 – 7 = – Electron
–5 = – Electron
Multiply through by –1
Electron = 5SUMMARY:Nitrogen ion with a charge of +2 has:
1. 7 protons
2. 7 neutrons
3. 5 electrons.
Learn more: https://brainly.com/question/20369115
Discuss the action of sodium with a) Ammonia b) non-metals
Answer:
i hope ammonia is the correct answer
A s'more requires 2 graham cracker squares, 1 marshmallow, and 3 chocolate pieces. If an entire chocolate bar contains 12 chocolate pieces, a marshmallow bag contains 40 marshmallows, and a graham cracker package contains 48 squares, how many s'mores can you make from 8 chocolate bars, one bag of marshmallows, and a package of graham crackers?
Explanation:
try 96 if that's not right let me know and I'll try to fix it
Answer:24
Explanation:
Determine which choice is an example of an endothermic process.
O A. Lighting a match
B. Respiration
C. Running a gas engine
D. Baking bread
Answer:
D. Baking bread
Explanation:
In this process, energy is absorbed and in an endothermic process energy is absorbed too.
Baking bread is an example of an endothermic process, therefore option (d) is correct .
What do you mean by endothermic process ?Endothermic reactions are chemical processes in which the reactants absorb heat from the environment to produce products.
An endothermic reaction is accompanied by an absorption of heat.
Endothermic reactions cause a cooling effect by lowering the temperature of the surrounding environment.
A decrease in temperature can be observed with the progression of the reaction. The reaction is non-spontaneous in endothermic reactions .
Baking bread is an example of an endothermic process, hence option (d) is correct .
Learn more about endothermic process ,here:
https://brainly.com/question/23184814
#SPJ5
A gas within a piston–cylinder assembly undergoes an isothermal process at 400 K during which the change in entropy is −0.3 kJ/K. Assuming the ideal gas model for the gas and negligible kinetic and potential energy effects, evaluate the work, in kJ.
Answer:
W = -120 KJ
Explanation:
Since the piston–cylinder assembly undergoes an isothermal process, then the temperature is constant.
Thus; T1 = T2 = 400K
change in entropy; ΔS = −0.3 kJ/K
Formula for change in entropy is written as;
ΔS = Q/T
Where Q is amount of heat transferred.
Thus;
Q = ΔS × T
Q = -0.3 × 400
Q = -120 KJ
From the first law of thermodynamics, we can find the workdone from;
Q = ΔU + W
Where;
ΔU is Change in the internal energy
W = Work done
Now, since it's an ideal gas model, the change in internal energy is expressed as;
ΔU = m•C_v•ΔT
Where;
m is mass
C_v is heat capacity at constant volume
ΔT is change in temperature
Now, since it's an isothermal process where temperature is constant, then;
ΔT = T2 - T1 = 0
Thus;
ΔU = m•C_v•ΔT = 0
ΔU = 0
From earlier;
Q = ΔU + W
Thus;
-120 = 0+ W
W = -120 KJ
Consider the following thermochemical reaction for kerosene:
2 C12H26(l) + 37 O2(g) 24 CO2(g) + 26 H2O(l) + 15,026 kJ
(a) When 21.3 g of CO2 are made, how much heat is released?
We have to solve this question using the stoichiometry of the reaction using number of moles:
The equation of the reaction is;
[tex]2 C12H26(l) + 37 O2(g) -----> 24 CO2(g) + 26 H2O(l) + 15,026 kJ[/tex]
According to the question;
Number of moles of CO2 released = 21.3 g/44 g/mol = 0.48 moles
From the stoichiometry of the reaction:
Since;
24 moles of CO2 released 15,026 KJ
0.48 moles of CO2 will release 0.48 * 15,026/24
= 301 KJ of heat.
https://brainly.com/question/6901180
Answer:
2 C12H26(l) + 37 O2(g) ----- > 24 CO2(g) + 26 H2O(l) + 15,026 kJ2C12H26(l)+37O2(g)−−−−−>24CO2(g)+26H2O(l)+15,026kJ
According to the question;
Number of moles of CO2 released = 21.3 g/44 g/mol = 0.48 moles
Since;
24 moles of CO2 released 15,026 KJ
0.48 moles of CO2 will release 0.48 * 15,026/24
= 301 KJ of heat.
Nombre de la siguiente estructura de compuesto orgánico
Answer:
Nombre de la siguiente estructura de compuesto orgánico
Explanation:
How many grams of Al were reacted with excess HCl if 3.86 L of hydrogen gas were collected at STP in the following reaction?
2 Al (s) + 6 HCl (aq) → 2 AlCl₃ (aq) + 3 H₂ (g)
The amount, in grams, of Al that reacted with excess HCl if 3.86 L of hydrogen gas were collected at STP in the reaction would be 3.099 grams.
Stoichiometric problemFrom the equation of the reaction, the mole ratio of Al that reacts with that of hydrogen gas that forms is 2:3.
At STP, 1 mole of any gas is equivalent to 22.4 Liters of the gas.
But only 3.86 L of hydrogen was formed in the reaction.
The equivalent mole of 3.86 L hydrogen at STP would be:
3.86 x 1/22.4 = 0.1723 moles
From the mole ratio, the equivalent mole of Al that will produce 0.1723 moles of hydrogen gas would be:
0.1723 x 2/3 = 0.1149 moles
Recall that: mass = mole x molar mass
Mass of 0.1149 moles Al = 0.1149 x 26.98
= 3.099 grams
Thus, the amount of Al that reacted with excess HCl is 3.099 grams.
More on stoichiometric problems can be found here: https://brainly.com/question/28297916
#SPJ1
The average temperature at the South Pole In January is - 35.4 °C.
Convert this temperature to degrees Fahrenheit. Round your answer to 3 significant digits.
°F
Answer:
-31.72°F
Explanation:
(-35.4°C × 9/5) + 32 = -31.72°F
The average temperature at the South Pole In January is - 35.4 °C. This temperature in Fahrenheit is -31.72 °F
To convert Celsius to Fahrenheit, you can use the formula:
°F = (°C × 9/5) + 32
Let's calculate the temperature at the South Pole in degrees Fahrenheit:
°F = (-35.4 × 9/5) + 32
°F = (-63.72) + 32
°F = -31.72
Rounding to three significant digits, the temperature at the South Pole in degrees Fahrenheit is approximately -31.7 °F. The negative sign indicates that the temperature is below the freezing point in both Celsius and Fahrenheit scales. The South Pole experiences freezing temperatures, as it is located near the Earth's southernmost point and experiences long periods of darkness during January.
Hence, the temperature in Fahrenheit is -31.7 °F.
Learn more about temperature here:
https://brainly.com/question/7510619
#SPJ 4
A 1.45 L buffer solution consists of 0.111 M butanoic acid and 0.281 M sodium butanoate. Calculate the pH of the solution following the addition of 0.078 moles of NaOH. Assumr that any contribution of the NaOH to the volume of the solution negligble. The ka of butanoic acid is 1.52x10^-5.
Ph= __________-
Answer: -5
Explanation:
If equal moles of boric acid (H3BO3) and NaOH fully react, what species would be in solution at the end of the reaction??
1) H3O+
2) OH-
3) H2BO3-
4) H3BO3
5) OH- and H3O+
The reaction between boric acid and sodium hydroxide is an example of a weak acid strong base reaction.
Boric acid is a weak acid while sodium hydroxide is a strong base.
Having that in mind, we know that a weak acid dissociates only to a small extent in solution while a strong base is almost 100% ionized in solution.
It the follows that a lot of OH- will be left behind after the reaction since only a little fraction of it reacts with the H^+ from boric acid.
Hence, if equal moles of boric acid (H3BO3) and NaOH fully react, OH- is left in the solution after reaction.
https://brainly.com/question/2364315
11. How many oxygen atoms are there in one formula unit of Ca2+?
Answer:
NO3 has 3 atoms of oxygen in it per molecule (indicated by the subscript of 3) and (NO3)2 means you have 2 NO3 molecules, meaning you double the subscript to get 6 oxygen atoms.
Explanation:
PLEASE HELP!!
this is on USAtestprep
a)
b)
c)
d)
Answer:
silicon dioxide /C
Explanation:
it can form thousands of covalent bonds between it's silicon and Oxygen due to it's macromolecular structure
Briefly workout the relationship between these constants:
[tex]{ \bf{K _{sp} \: and \: K _{c} }}[/tex]
In consideration of the decopmposition of hydrogen iodide.
[tex]{ \sf{2HI _{(g)} →H _{2(g)} +I _{2(g)} }}[/tex]
[tex]{ \tt{any \: help \: is \: appreciated}}[/tex]
Kc require (aqueous/gaseous) products to be on the numerator and (aqueous/gaseous) reactants to be in the denominator, whereas Ksp will require (aqueous) products to be on the numerator and (aqueous) reactants to be in the denominator. Both require products on top and reactants in the bottom.
K = [products] / [reactants]
Kc is used when a reaction reaches dynamic equilibrium, whereas Ksp is used when an insoluble ionic solid dissolved by a tiny amount in a solution, as well as in determining whether or not a precipitate will form.
Kc can be used to measure equilibrium concentration for all reactions, whereas Ksp is limited to only ionic compounds' solubility.
The decomposition of HI (g) will required the use of Kc since the species are all gaseous, and gases cannot be ionic.
Copper crystallizes in a face-centered cubic unit cell. The density of copper is 8.94 g/cm3. Calculate the length of the edge of the unit cell in pm.
a) 461 pm
b) 361 pm
c) 261 pm
d) 161 pm
e) None of the above
Answer:
361.4 pm is the length of the edge of the unit cell
Explanation:
First, let's calculate the average volume each atom is taking. Start with calculating how many moles of copper we have in a cubic centimeter by looking up the atomic weight. Atomic weight copper = 63.546 Now divide the mass by the atomic weight, getting 8.94 g / 63.546 g/mol = 0.140685488 mol And multiply by Avogadro's number to get the number of atoms: 0.140685488 * 6.022140857x10^23 = 8.472278233x10^22 Now examine the face-centered cubic unit cell to see how many atoms worth of space it consumes. There is 1 atom at each of the 8 corners and each of those atoms is shared between 8 unit cells for for a space consumption of 8/8 = 1 atom. And there are 6 faces, each with an atom in the center, each of which is shared between 2 unit cells for a space consumption of 6/2 = 3 atoms. So each unit cell consumes as much space as 4 atoms. Let's divide the number of atoms in that cubic centimeter by 4 to determine the number of unit cells in that volume. 8.472278233x10^22 / 4 = 2.118069558x10^22 Now calculate the volume each unit cell occupies. 1 cm^3 / 2.118069558x10^22 = 4.721280262x10^-23 cm^3 Let's get the cube root to get the length of an edge. (4.721280262x10^-23 cm^3)^(1/3) = 3.61426x10^-08 cm Now let's convert from cm to pm. 3.61426x10^-08 cm / 100 cm/m * 1x10^12 pm/m = 361.4 pm Doing an independent search for the Crystallographic Features of Copper, I see that the Lattice Parameter for copper at at 293 K is 3.6147 x 10^-10 m which is in very close agreement with the calculated amount above. And since metals expand and contract with heat and cold, I assume the slight difference in values is due to the density figure given being determined at a temperature lower than 293 K.
