The element that will have the lowest electronegativity is an element with a small number of valence electrons and a large atomic radius.
Electronegativity of an element is the ability or power of that element in a molecule to attract electrons to its Valence electrons. The following are the properties of electronegativity:
It increases across a period from left to right of the periodic table,It decreases down the periodic table groupsGroup 1 elements are the least (lowest) electronegative elements. These elements have the lowest valence electrons with a large atomic radius. Group 7 elements are the most electronegative elements.Atomic radius of elements increase down a group because of a progressive increase in the number of shells occupied by electrons which increases the size. But it decreases across a period because electrons are accommodated within the same shell leading to greater attraction by the protons in the nucleus.
Learn more about electronegativity of elements here:
https://brainly.com/question/20348681
Answer: Its B the guy above me is correct
What is the difference between a strong base and a weak base?
A. A strong base is always more concentrated than a weak base,
B. A strong base has a lower Ki than a weak base.
C. A strong base produces more ions in solution than a weak base,
D. A strong base is not as conductive as a weak base.
Answer:
C
Explanation:
Perform the following operation
and express the answer in
scientific notation.
3.490x10-3 + 1.100x10-2
[?] 10^[?]
Answer:
1449 × 10 ^-5
Explanation:
3.490x10-3 + 1.100x10-2
= 0.01449
0.01449× 10^ 5
= 1449
Answer:
1.449x10^-2
Explanation:
You measure the mass of an unknown piece of metal to be 325 grams. The
volume of the metal is measured to be 16.8 cm3. What is the density of the
piece of metal? What kind of metal is it?
Answer:
The metal is a steel that might be casted.
Explanation:
Using the mesh analysis to solve choleski and gauss jacobi and siedel
a. For a chemistry lab final exam, a high school chemistry student was given a 1-mole sample of CaCl2 and a 1-mole sample of MgCl2 but was not told which sample was which. He was to identify the powders.
He looked up the enthalpies of formation for both of the chemicals and calculated the ΔHreaction for dissolving each powder: CaCl2 (s) Ca 2+ (aq) + 2Cl – (aq), and MgCl2 (s) Mg 2 (aq) + 2Cl – (aq). He then put each powder in a coffee-cup calorimeter and added water.
When sample A dissolved, the temperature increased by 0.74°C. When sample B dissolved, the temperature increased by 0.39°C. Which chemical was A, and which was B? Use the table of enthalpies of formation to help you. Explain your reasoning.
Ca^2+ ion is smaller than Mg^2+ ion hence it has a greater heat of formation or lattice energy.
When a crystal lattice is formed, the energy that is released if the component ions of the compound are brought together from infinity is called the lattice energy. It is the energy released when a crystal lattice is formed from its component ions.
The question lets us know that the heat released by the compounds depends on the energy released upon formation of the compound. Hence, the higher the energy released upon formation, the higher the magnitude of heat released upon dissolution of the compound.
Recall that lattice energy depends on the size of the ions. Thus, the smaller the ions, the higher the lattice energy.
Ca^2+ is smaller than Mg^2+ hence more energy is given off when CaCl2 is formed than when MgCl2 is formed.
As stated above, the greater the lattice energy, the greater the heat released when the lattice dissolves and the higher the rise in temperature.
Putting all these together, Sample A must be CaCl2 while sample B must be MgCl2.
https://brainly.com/question/2815368
Which of the following chemical equations depicts a balanced chemical
equation?
O A. AgNO3 + K2 CrO4- > KNO3 + Ag2Cr04
B. 3AgNO3 + 2K2 CrO4- > 3KNO3 + 2Ag2 CrO4
OC. 2AgNO3 + K2 CrO4- > 2KNO3 + Ag2Cr04
OD. AgNO3 + K2 CrO4- > 2KNO3 + Ag2Cr04
Reset Selection
Answer:
C.
Explanation:
I believe C is the correct answer.
The velocity of an electron that is emitted from a metallic surface by a photon is 3.6E3 km*s^-1. (a) What is the wavelength of the ejected electron? (b) No electrons are emitted from the surface of the metal until the frequency of the radiation reaches 2.50E16 Hz. How much energy is required to remove the electron from the metal surface? (c) What is the wavelength of the radiation that caused photoejection of the electron? (d) What kind of electromagnetic radiation was used?
(a) The wavelength of the electron is 202.25885 nm
(b) The minimum energy required to remove the electron is 1.6565 × 10⁻¹⁷ J
(c) The wavelength of the causing radiation is approximately 8.84 nm
(d) X-ray
The question parameters are;
The given parameters of the electron are;
The velocity of the electron, v = 3.6 × 10³ km/s
(a) de Broglie wavelength is given as follows;
λ = h/(m·v)
Where;
λ = The wavelength of the wave
h = Planck's constant = 6.626 × 10⁻³⁴ J·s
m = The mass of the electron = 9.1 × 10⁻³¹ kg
Therefore, we get;
λ = 6.626 × 10⁻³⁴/(9.1 × 10⁻³¹ × 3.6 × 10⁶) = 202.25885 × 10⁻⁶
The wavelength, λ, of the electron is 202.25885 × 10⁻⁶ m = 202.25885 nm
(b) The energy required to remove the electron from the metal surface is known as the work function, W₀, which is given by the following formula
W₀ = h·f₀
Where;
f₀ = The threshold frequency
Given that the threshold frequency, f₀ = 2.50 × 10¹⁶ Hz, we have;
W₀ = 6.626 × 10⁻³⁴ J·s × 2.50 × 10¹⁶ Hz = 1.6565 × 10⁻¹⁷ J
The energy required to remove the electron from the metal surface, W₀ = 1.6565 × 10⁻¹⁷ J
(c) The wavelength of the radiation that caused the photoejection of the electron is given as follows;
The energy of the incoming photon, E = W₀ + (1/2)·m·v²
Where;
v = The velocity of the electron, and m = The mass of the electron
Therefore;
E = 1.6565 × 10⁻¹⁷ + (1/2) × 9.1 × 10⁻³¹ kg × (3.6 × 10⁶ m/s)² = 2.24618 × 10⁻¹⁷ J
We have;
E = h·f
∴ f = (2.24618 × 10⁻¹⁷ J)/(6.626 × 10⁻³⁴ J·s) = 3.38994869 × 10¹⁶ Hz
The speed of light, c = 299,792,458 m/s
From the equation for the speed of light, we have;
λ = c/f
∴ λ = (299,792,458 m/s)/(3.38994869 × 10¹⁶ Hz) = 8.84356919 nm ≈ 8.84 nm
The wavelength of the radiation that caused photoejection of the electron, λ[tex]_{causing \ radiation}[/tex] ≈ 8.84 nm
(d) The kind of electromagnetic radiation used which has a wavelength of 8.84 nm is the X-Ray which are electromagnetic radiation having wavelengths that extend from 10 picometers to 10 nanometers.
Learn more about De Broglie wavelength here;
https://brainly.com/question/19131384
What is the electron configuration for fluorine?
Answer:
1s2 2s2 2p5
step by step:
Answer:
Electron configuration using subshell;
1s² 2s² 2p⁵
using main shell ie;
2,7
Is there any Chemical including in BIOGESIC?
Can you tell me if it was included?
Answer:
This combination product contains 2 medications, acetaminophen and an antihistamine. Acetaminophen helps to reduce fever and/or mild to moderate pain (such as headache, backache, aches/pains due to muscle strain, cold, or flu).
Explanation:
it will help you. may be
Answer:
looooser
mark me brailist
cho 3,8g hỗn hợp na2co3 và nahco3 tác dụng với dung dịch hcl.Thoát ra 896 khí ở đktc a/ tính thành phần % theo khối lượng mỗi muối trong hỗn hợp đều.b/ tính thể tích dung dịch hcl 20% biết d= 1,1g trên ml
Answer:
99
Explanation:
it is matter so it and it has.bein 99
ammonium hydroxide molecular weight?step by step????
Lets find
[tex]\\ \sf\longmapsto NH_4OH[/tex]
[tex]\\ \sf\longmapsto 14u+4(1u)+16u+1u[/tex]
[tex]\\ \sf\longmapsto 14u+4u+17u[/tex]
[tex]\\ \sf\longmapsto 18u+17u[/tex]
[tex]\\ \sf\longmapsto 35u[/tex]
define SI unit system
Answer:
The SI base units are the standard units of measurement defined by the International System of Units (SI) for the seven base quantities of what is now known as the International System of Quantities: they are notably a basic set from which all other SI units can be derived.
Write down the importance of nitrogen for plants
Explanation:
People also ask
What is the importance of nitrogen for plants?
Nitrogen is an essential macronutrient for plant function and is a key component of amino acids, which form the building blocks of plant proteins and enzymes. Proteins make up the structural materials of all living matters and enzymes facilitate the vast array of biochemical reactions within a plant.
Answer:
Nitrogen is vital because it is a major component of chlorophyll, the compound by which plants use sunlight energy to produce sugars from water and carbon dioxide(i.e.,photosynthesis). It is also a major component of amino acids, the building blocks of proteins. Without proteins, plants wither and die.
I hope this helps.
PLEASE HELP 100 POINTS!!!!!! Read the short section below on the difference between everyday experience and science.
Everyday Experience vs. Science
The process of science can sound very similar to how you experience life. However, everyday human experience and science are very different. Science has procedures with special conditions and rules for making observations. People do not have such restrictions in everyday life. Individuals can witness events, make adjustments, and practice trial and error similar to scientists. Unlike scientists, individuals are free to do tests using any method they choose. People can try different ways of doing things like driving, cooking, and working out. Then, they can modify their procedures to get the results they want.
Unlike the public, scientists perform trial and error by doing carefully designed experiments. Their experiments require the proper methods and tools. In addition, their projects undergo review by their peers. Even though some science observations take place in a natural environment, they do so for a brief period of time or in a limited area. Much of science must be completed in an artificial environment to reduce the number of variables that can affect the experimental process. Though scientists change factors within their research, they do not usually change the results of their experiments. Good scientists ensure that their own wants and preferences do not affect the knowledge they discover.
Despite having different purposes and abilities, both everyday experiences and science are important. Many key scientific discoveries were started with someone’s everyday experiences. Everyday experiences influence the decisions and direction people take in life. The steps scientists follow in investigations influence information; they provide a way of knowing about the world and explaining how it works.
In your opinion, are scientists born or made? How can everyday people challenge or extend scientific ideas and make scientific discoveries? Use excerpts from the section to explain and support the reasoning behind your answer.
Answer:
Scientist are born the most likely people to become scientist have naturally accelerated thought process from a young age
Which of the following units are commonly used in chemistry? A Kelvin b ampere c fluid ounce d kilogram
Explanation:
your answer is Kelvin because it is the SI unit of temperature
A database search would be the best method of gathering which type of data?
data?
Utilizing a database search would be most effective for obtaining the data related to registered voters. The Option D.
What method is optimal for collecting total registered voters' data in a country?A database search proves invaluable when seeking to retrieve specific information such as the total number of registered voters in a country. By querying the database with the appropriate parameters, you can efficiently extract accurate and up-to-date voter registration figures.
This method streamlines data collection by ensuring accuracy and reducing the potential for errors associated with manual collection processes.
Read more about database
brainly.com/question/518894
#SPJ1
which of the following will show tyndall effect ?
a. salt solution
b. copper sulphate solution
c. starch solution
d. chalk powder in water
Answer:
Starch solution
Explanation:
Colloidal solutions show tyndall effect and starch solution is a colloidal solution.
How do experiments help scientists learn about the world?
A. Experiments explain scientific theories.
B. Experiments prove the scientists' hypotheses.
C. Experiments test the scientists' ideas.
D. Experiments correct old ideas.
Answer:
C. Experiments test the scientists' ideas.
Explanation:
Experiments test the scientists' ideas. Therefore, the correct option is C.
By testing ideas and hypotheses, experiments are an essential part of the scientific method and aid scientists' understanding of the world. Science uses regulated procedures to detect particular phenomena, track results, and collect data. These studies give researchers a chance to investigate cause-and-effect relationships, detect patterns, and draw conclusions based on the data. Scientists can test their ideas, theories, and predictions by systematically adjusting various factors to see whether experimental results confirm or disprove them.
Therefore, the correct option is C.
Learn more about Experiments, here:
https://brainly.com/question/15088897
#SPJ2
In a chemical equation, the symbol that means "dissolved in water" is _____. (s) (l) (aq) (g)
formula for finding speed using binding energy and mass
Answer:
The formula for finding speed using binding energy and mass is E=mc2.
what happens to rubber when hammered
Answer:
No change
Explanation:
Since rubber are elastic in nature, there's no change in it's state even if it is hammered. So, it will be in it's initial state as it was before.
1. Mg + HCl … + ….
2. NaOH + HNO3 … + ….
3. KOH + CuCl2 … + ….
4. Na2SO4 + BaCl2 … + ….
5. HCl + FeO à … + …
Explanation:
The answer is mentioned above.
Hope it helps.
pls answer this question its important
Answer:
11) B
Explanation:
define briefly about kilogram
Answer:
it's the SI unit of mass (equivalent to
approximately 2.205 lb), first introduced as a unit of mass for the metric system.
The number of particles in 8 g 02 molecules are
Answer:
cholesterol
Explanation:
gsdhudbdjbfmcjfjdncbdhdnhdndbchdncbdn f f ff
Suppose you had a valuable collection of small diamonds, which you kept safe from the thieves by mixing them with white sugar crystals. You store the mixture in a jar labeled 'sugar'. Now you want to sell the diamonds. Describe how you would separate all the diamonds from the sugar.
Answer:
Pour the sugar/diamond mixture into a container of water and stir until the sugar is dissolved completely. Then strain the mixture and wash the diamonds with water.
Answer:
Stir with a large enough volume of cold water to dissolve all the sugar. Filter to leave the diamonds on the filter paper. Wash on the filter paper with more water to remove any last traces of sugar solution. Allow to dry.
URGENT PLS HELP What are derived units?
Answer:
A derived unit is a unit that results from a mathematical combination of SI base units. We have already discussed volume and energy as two examples of derived units.
Write the valence shell electronic configuration of an element present in the 3rd
period and Group IIIA,
Al= [Ar] 3s^2 3p^1
for the third period the principal quantum number is n=3. the third
can someone tell me what does the numbers in the circle mean? and how do I find it?
Answer:
Electronic configurations of three magnesium atoms and two nitrogen atoms.
[tex]{ \sf{.}}[/tex]
8th Grade Middle School Science
You measure the mass of an apple using a balance. You get these three measurements:
Trial 1: 167.0 g
Trial 2: 166.9 g
Trial 3: 167.2 g
You know that the true mass of the apple is 172 g. Describe your results in terms of precision and accuracy. Explain your answer.
Answer:
Your results are precise, but not very accurate.
Explanation:
The results are precise because each weight is close to the next. The weights are not accurate because they are pretty far from the true mass.
Answer:
The results of the three trials are accurate because there all very close to the correct mass of the apple is, 172 g. The results are precise because each weight is close to the next. The weights are not accurate because they are pretty far from the true mass.
Question 4. Thanks !!
Answer:
the shape would be square planar.
Explanation:
From the question, we can see that the electron geometry is octahedral. Removing the two axial bonds to fit the description, and we have a square planar structure.
