Answer:
The number of neutrons or electrons in an atom can change without changing the identity of the element.
Describe the change in motion and kinetic energy of the particles as thermal energy is removed from a liquid. Which change of state might happen?
Please I will give brainliest!!!!
Answer:
Change in state from liquid to solid.
Explanation:
Decrease in thermal energy will decrease energy and particles will slow down. Change in state from liquid to solid.
A force cannot exist without an agent and a system.
True
False
Answer:
true
Explanation:
forces require an agent
you should always be able to identify what (the agent) is producing the force
If a wave has speed of 235 m/s with a wavelength of 3 m, what is the frequency of the wave?
An organ pipe of length 3.0 m has one end closed. The longest and next-longest possible wavelengths for standing waves inside the pipe are
Answer:
The longest wavelength for closed at one end and open at the other is
y / 4 where y is the wavelength - that is node - antinode
The next possible wavelength is 3 y / 4 - node - antinode - node -antinode
y / 4 = 3 m y = 12 meters the longest wavelength
3 y / 4 = 3 m y = 4 meters 1 / 3 times as long
a concave mirror has a radius of curvature of 60cm. How close to the mirror should an object be placed so that the rays travel parallel to each other after reflection
Answer:
Answer:30 cm
Answer:30 cmExplanation:
Answer:30 cmExplanation:Given=ROC= 60cm
Answer:30 cmExplanation:Given=ROC= 60cmObject be placed so that the rays that came from the object to them mirror are reflected from the mirror, and, then travel parallel to each other= 30cm at focus.
When the drag force on an object falling through the air equals the force of gravity, the object has reached
terminal force.
terminal acceleration,
terminal illness.
terminal velocity
A steel cable with Cross Sectional Area 3.00cm² has an elastic limit of 2.40 x 10^8pascals. Find the maximum upward acceleration that can be given a 1200kg elevated supported by the cable if the stress is not to exceed one-third of the elastic limit.
Answer:
Stress = F / A force per unit area
A = 3.00 cm^2 = 3 E-4 m^2
F = 2.4E8 N/m^2 * 3E-4 m^2 = 7.2E4 N max force applied
F/3 = 2.4E4 N if force not to exceed limit (= f)
f = M a
a = 2.4 E4 N / 1.2 E3 kg = 20 m / s^2 about 2 g
what is angular frequency
Find the acceleration of the blocks when the system is released. The coefficient of kinetic friction is 0.4, and the mass of each block is 1 kg. Neglect the mass of the pulleys and cord.
Answer:
a = 4.9(1 - sinθ - 0.4cosθ)
Explanation:
Really not possible without a complete setup.
I will ASSUME that this an Atwood machine with two masses (m) connected by an ideal rope passing over an ideal pulley. One mass hangs freely and the other is on a slope of angle θ to the horizontal with coefficient of friction μ. Gravity is g
F = ma
mg - mgsinθ - μmgcosθ = (m + m)a
mg(1 - sinθ - μcosθ) = 2ma
½g(1 - sinθ - μcosθ) = a
maximum acceleration is about 2.94 m/s² when θ = 0
acceleration will be zero when θ is greater than about 46.4°
How do for-profit and nonprofit fitness centers compare with each other?
For-profit centers offer more luxury services than nonprofit centers.For-profit centers offer more luxury services than nonprofit centers. , ,
For-profit centers have lower membership fees than nonprofit centers.For-profit centers have lower membership fees than nonprofit centers. , ,
For-profit centers place more emphasis on weight lifting than nonprofit centers.For-profit centers place more emphasis on weight lifting than nonprofit centers. , ,
For-profit centers are more common in low-income communities than nonprofit centers.
Comparison of For-profit and Non-profit Fitness Centers
This is how they compare with each other: For-profit centers offer more luxury services than nonprofit centers.
For-profit fitness centers are fitness centers that offer their services to cover their costs and make some profits. They are business entities that generate income for their shareholders. Their fees are based on cost plus profit. This approach enables them to remain sustainable as business ventures.
They are not like non-profit fitness centers, which may offer their services for free or at cost. Sometimes, the nonprofit centers may not even cover their fixed and operational costs. They are usually located in low-income communities, unlike for-profit fitness centers, which are mainly located in rich-income communities.
Considering their clientele, for-profit centers provide modern and better facilities to satisfy their rich-income clients.
Thus, these for-profit centers offer more luxury services than their non-profit counterparts.
For more information about how for-profit centers base their charges, see https://brainly.com/question/21302488.
A racing car going a 20 m/s stops in a distance of 20 m.What is its acceleration?
step by step
formular v^2 = u^2+2as
stop v = 0
0 = 400+2a(20)
-400=40a
a = -10 m/s^2
ans affect acceleration is 10 m/s^2
There was a major collision of an asteroid with the Moon in medieval times. It was described by monks at Canterbury Cathedral in England as a red glow on and around the Moon. How long after the asteroid hit the Moon, which is 3.84 x 10^5 km away, would the light first arrive on Earth?
Answer:
c = 3.00E108 m/s = 3.00E5 km/s
t = S / v = 3.84E5 / 3.00E5 = 1.28 sec
what is liquid pressure and its si unit?
The SI unit of pressure is the pascal: 1Pa=1N/m2 1 Pa = 1 N/m 2 . Pressure due to the weight of a liquid of constant density is given by p=ρgh p = ρ g h , where p is the pressure, h is the depth of the liquid, ρ is the density of the liquid, and g is the acceleration due to gravity.
A tuning fork with a frequency of 335 Hz and a tuning fork of unknown frequency produce beats with a frequency of 5.3 when struck at the same time. A small piece of putty is placed on the tuning fork with the known frequency and it's frequency is lowered slightly. When struck at the same time, the two forks now produce a beat frequency of 8 Hz. 1)What is frequency of tuning fork which originally had a frequency of 335 Hz after the putty has been placed on it
Answer:
Explanation:
Unknown fork frequency is either
335 + 5.3 = 340.3 Hz
or
335 - 5.3 = 329.7 Hz
After we modify the known fork, the unknown fork frequency equation becomes either
(335 - x) + 8 = 340.3
(335 - x) = 332.3
x = 2.7 Hz
or
(335 - x) + 8 = 329.7
(335 - x) = 321.7
x = 13.3 Hz
IF the unknown fork frequency was 340.3 Hz,
THEN the 335 Hz fork was detuned to 335 - 2.7 = 332.3 Hz
IF the unknown fork frequency was 329.7 Hz,
THEN the 335 Hz fork was detuned to 335 - 13.3 = 321.7 Hz
potential diffetence
Answer:
6v
Explanation:
V=IR
V= 2* 3
V= 6 volts
No matter how far you stands from a mirror your image appear errect .the mirror is
Answer:
convex mirror
.....................
Answer:
convex mirror..........
A projectile is fired into the air from the top of a 200-m cliff above a valley as shown below. Its initial velocity is 60 m/s at 60° above the horizontal. Calculate (a) the maximum height, (b) the time required to reach its highest point, (c) the total time of flight, (d) the components of its velocity just before striking the ground, and (e) the horizontal distance traveled from the base of the cliff.
a) y(max) = 337.76 m
b) t₁ = 5.30 s the time for y maximum
c)t₂ = 13.60 s time for y = 0 time when the fly finish
d) vₓ = 30 m/s vy = - 81.32 m/s
e)x = 408 m
Equations for projectile motion:
v₀ₓ = v₀ * cosα v₀ₓ = 60*(1/2) v₀ₓ = 30 m/s ( constant )
v₀y = v₀ * sinα v₀y = 60*(√3/2) v₀y = 30*√3 m/s
a) Maximum height:
The following equation describes the motion in y coordinates
y = y₀ + v₀y*t - (1/2)*g*t² (1)
To find h(max), we need to calculate t₁ ( time for h maximum)
we take derivative on both sides of the equation
dy/dt = v₀y - g*t
dy/dt = 0 v₀y - g*t₁ = 0 t₁ = v₀y/g
v₀y = 60*sin60° = 60*√3/2 = 30*√3
g = 9.8 m/s²
t₁ = 5.30 s the time for y maximum
And y maximum is obtained from the substitution of t₁ in equation (1)
y (max) = 200 + 30*√3 * (5.30) - (1/2)*9.8*(5.3)²
y (max) = 200 + 275.40 - 137.64
y(max) = 337.76 m
Total time of flying (t₂) is when coordinate y = 0
y = 0 = y₀ + v₀y*t₂ - (1/2)* g*t₂²
0 = 200 + 30*√3*t₂ - 4.9*t₂² 4.9 t₂² - 51.96*t₂ - 200 = 0
The above equation is a second-degree equation, solving for t₂
t = [51.96 ±√ (51.96)² + 4*4.9*200]/9.8
t = [51.96 ±√2700 + 3920]/9.8
t = [51.96 ± 81.36]/9.8
t = 51.96 - 81.36)/9.8 we dismiss this solution ( negative time)
t₂ = 13.60 s time for y = 0 time when the fly finish
The components of the velocity just before striking the ground are:
vₓ = v₀ *cos60° vₓ = 30 m/s as we said before v₀ₓ is constant
vy = v₀y - g *t vy = 30*√3 - 9.8 * (13.60)
vy = 51.96 - 133.28 vy = - 81.32 m/s
The sign minus means that vy change direction
Finally the horizontal distance is:
x = vₓ * t
x = 30 * 13.60 m
x = 408 m
uniform ladder of length 6.0 m and weight 300 N leans against a frictionless vertical wall. The foot of the ladder isplaced 3.0 m from the base of the wall. What must be the magnitude of the force of static friction supplied by the floorto keep the ladder from slipping
Answer:
Fx1 (6 m) sin 60 = 300 (3 m) cos 60 balancing torques about floor
Fx1 = 900 * 1/2 / 5.20 = 86.6 N this is the horizontal force that must be supplied by the wall to balance torques about the floor
This is also equal to the static force of friction that must be applied at the point of contact with the floor to balance forces in the x-direction.
Fx1 = Fx2 = 86.6 N
a beam of light converging to the point of 10 cm is incident on the lens. find the position of the point image if the lens has a focal length of 40 cm
Answer:
beam of light converges to a point A. A lens is placed in the path of the convergent beam 12 cm from P.
To find the point at which the beam converge if the lens is (a) a convex lens of focal length 20 cm, (b) a concave lens of focal length 16 cm
Solution:
As per the given criteria,
the the object is virtual and the image is real (as the lens is placed in the path of the convergent beam)
(a) lens is a convex lens with
focal length, f=20cm
object distance, u=12cm
applying the lens formula, we get
f
1
=
v
1
−
u
1
⟹
v
1
=
f
1
+
u
1
⟹
v
1
=
20
1
+
12
1
⟹
v
1
=
60
3+5
⟹v=7.5cm
Hence the image formed is real, at 7.5cm from the lens on its right side.
(b) lens is a concave lens with
focal length, f=−16cm
object distance, 12cm
applying the lens formula, we get
f
1
=
v
1
−
u
1
⟹
v
1
=
f
1
+
u
1
⟹
v
1
=
−16
1
+
12
1
⟹
v
1
=
48
−3+4
⟹v=48m
Hence the image formed is real, at 48 cm from the lens on the right side.
Dharna is said to be concentration it is true or false
dharna is said to be concentration.. it is true
A uniform cylinder of mass 1.5 kg and radius 0.3 m rolls down a ramp inclined at an angle 0.12 radians to the horizontal. What is the acceleration of the cylinder in m/s2
Answer:
different crystals from 6 to the point of the day I am not sure if you are aware of this but I am not sure if you are aware of this but I am not sure if you have any idea of how 3 is going to be able or not 2 3 or even if you have a good day or two to get to know you a 3 of a good place To Go for your own business or business 5 52 you are a great 49,494 548 4.two object A and B vertically thrown upward with velocities of 80m/s and 100m/s at two seconds interview where and when will the two object meet.
Answer:
THIS IS YOUR ANSWER:
☺✍️HOPE IT HELPS YOU ✍️☺
2- A student ran 135 meters in 15 seconds. What was the student's velocity?
*
7.5 m/s
9 m/s
12 m/s
15 m/s
Answer:
9 Brainly hahaha ............huh
A circular loop of wire is in the plane of the paper. The south pole of a bar magnet is being moved from a position in front of the paper in a direction away from the center of the loop. The direction of the induced current in the loop. Which is the direction of the induced current in the loop?
Answer:
Counterclockwise
explanation in attachment
A positron is a particle that has the same mass but opposite charge of an electron. An electron and a positron are shot directly toward each other by a particle accelerator. They start very far from each other, each with a kinetic energy of
Complete Question
The Complete Question is Attached below
Answer:
[tex]E_t=2.14*10^{-13}J[/tex]
Explanation:
From the question we are told that:
Kinetic energy [tex]K.E=5*10^{-14}[/tex]
Generally, the equation for Total Energy is mathematically given by
[tex]E_t=K.E+2me[/tex]
Where
Mass of an electron in MeV
[tex]m=0.510 998 950 00 MeV[/tex]
And
Electron Charge
[tex]1.6 * 10^{-19}[/tex]
Therefore
[tex]E_t=K.E+2me[/tex]
[tex]E_t=5*10^{-14}*0.510 998 950 00*1.6 * 10^{-19}[/tex]
[tex]E_t=2.14*10^{-13}J[/tex]
Do you believe in ghost
Answer:
well its about our thinking but i do believe in ghost a little
Which questions would a biopsychologist most likely address when studying depression?
A bio psychologist would address questions on stress, abuse and conflict when studying depression.
A bio psychologist is a person that is involved in the study of the brain and peoples behavior. This person tries to understand why people do the things or act the way they do using a biological and psychological approach.
While trying to understand the cause of this depression, the bio psychologist would
ask to know if the subject is undergoing stressful situationsIf an abuse led to the situation. It could be physical, emotional or mental abuse. Another question would be if a conflict or altercation caused it.read more on
https://brainly.com/question/17343378?referrer=searchResults
I only need help with e (bottom of the page).
Explanation:
The box is accelerating along the y-axis at a rate of [tex]+2.5\:\text{m/s}^2[/tex] as well as along the x-axis at a rate of [tex]+5.1\:\text{m/s}^2.[/tex] So the magnitude of the box's total acceleration is given by
[tex]a_T = \sqrt{a_x^2 + a_y^2}[/tex]
[tex]\:\:\:\:= \sqrt{(5.1\:\text{m/s}^2)^2 + (2.5\:\text{m/s}^2)^2}[/tex]
[tex]\:\:\:\:=5.7\:\text{m/s}^2[/tex]
The direction of the acceleration [tex]\theta[/tex] with respect to the horizontal direction is given by
[tex]\theta = \tan^{-1}\!\left(\dfrac{a_y}{a_x}\right) = \tan^{-1}\!\left(\dfrac{2.5\:\text{m/s}^2}{5.1\:\text{m/s}^2}\right)[/tex]
[tex]\:\:\:\:= 26.1°[/tex]
Ibrah open a bottle of perfume infront of the room. After few minutes the smell of perfume reach the whole room. Explain why this happens
A ball is thrown from the ground with velocity of 30m/s after what time has the ball has velocity of 10m/s down ward?
a ball is thrown vertically upward from the ground with the velocity of 30m/s. a) how long will it take to rise to its highest poitn? b) how high does the ball rise? c) how long after projection will the ball have a velocity of 10m/s? d) what is the total time of flight?
From Vf = Vo - gt, 0 = 30 - 9.8t yielding t = 3.06 sec.
From h = Vo(t) - g(t^2)/2, h = 30(3.06) - 4.9(3.06)^2 yielding h = 45.88m.
From Vn = Vo - gt, 20 - 9.8t yielding t = 2.04 sec.
Since the fall time equals the rise time, the total flight time is 2(3.06) = 6.12 sec.
