What is the order, plz answer

Answer:

Down is the recipe for momo..

Explanation:

recipe..

. Sieve the wheat flour carefully to remove lumps.

. Add water and knead the flour well to prepare a dough

. Remove the skin of the boiled potato ,cut into small pieces

. Heat the cooking oil in frying pan, and fry the pieces of onions cabbage green chili tomato pea etc.

. Prepare a mix veg stuffing by mixing potato other vegetables , green coriander and salt.

. Prepare a small balls of dough and roll it out of belna.

. Put 10 gm of mix vegetables stuff in the center of rolled dough and close it from all the sides to make a small ball.

. steam the momo for 10-15 minutes. After that it will be ready to serve.

. A sauce or pickle is usually eaten with momo.

Answer:

Explanation:

Sieve the wheat flour carefully to remove lumps.

Answer: Weigh boat

Explanation:

they are disposable and will likely melt

Weigh boat among the following  should not be used to hold chemicals while they are being heated ,therefore option (b) is correct.

Weigh boats are ideal for general-purpose weighing, evaporating, dispensing, and storing applications. Compatible with balances and dryers, these pans support precise measurements.

A weigh boat is an open container often used in chemistry and bio chemistry. It is used if you want to weigh a sample very accurately.

A weigh boat is an object that is used to protect your balance from any object you want to weigh.

Weigh boat among the following  should not be used to hold chemicals while they are being heated ,hence option (b) is correct.

Learn more about weigh boats ,here:

https://brainly.com/question/14555250

#SPJ2

Explanation:

it is that when an object is moving 25 m per sec to calculate its time we can simply divide 1.5 by 25 and multiply by 1

Answer:

[tex]\rm K[/tex]: approximately [tex]22.0\%[/tex].

[tex]\rm Cl[/tex]: approximately [tex]19.9\%[/tex].

[tex]\rm O[/tex]: approximately [tex]27.0\%[/tex].

[tex]\rm Al[/tex]: [tex]31.0\%[/tex].

Explanation:

Consider a [tex]100\; \rm g[/tex] sample. There would be [tex]69.0\% \times 100\; \rm g = 69.0\; \rm g[/tex] of [tex]\rm KClO_{3}[/tex] and [tex]100.0\; \rm g - 69.0\; \rm g = 31.0\; \rm g[/tex] of [tex]\rm Al[/tex].

Out of that [tex]69.0\; \rm g[/tex] of [tex]\rm KClO_{3}[/tex]:

[tex]31.9\%[/tex] (by mass) would be [tex]\rm K[/tex]: [tex]31.9\% \times 69.0\; \rm g \approx 22.0\; \rm g[/tex].

[tex]28.9\%[/tex] (by mass) would be [tex]\rm Cl[/tex]: [tex]28.9\% \times 69.0\; \rm g \approx 19.9\; \rm g[/tex].

[tex]39.2\%[/tex] (by mass) would be [tex]\rm O[/tex]: [tex]39.2\% \times 69.0\; \rm g \approx 27.0\; \rm g[/tex].

Overall, the composition (by mass) of each element in this mixture would be:

[tex]\rm K[/tex]:

[tex]\begin{aligned} & \frac{31.9\% \times 69.0\; \rm g}{100\; \rm g} \\ =\; & 31.9\% \times 69.0\% \\ \approx \; & 22.0\%\end{aligned}[/tex].

[tex]\rm Cl[/tex]:

[tex]\begin{aligned} & \frac{28.9\% \times 69.0\; \rm g}{100\; \rm g} \\ =\; & 28.9\% \times 69.0\% \\ \approx \; & 19.9\%\end{aligned}[/tex].

[tex]\rm O[/tex]:

[tex]\begin{aligned} & \frac{39.2\% \times 69.0\; \rm g}{100\; \rm g} \\ =\; & 39.2\% \times 69.0\% \\ \approx \; & 27.0\%\end{aligned}[/tex].

[tex]\rm Al[/tex]:

[tex]\begin{aligned}& \frac{100\; \rm g - 69.0\; \rm g}{100\; \rm g} \\ =\; & 100\% - 69.0\% \\ =\; & 31.0\%\end{aligned}[/tex].

Answer:

20,40,60

Explanation:

Let the three parts be 1x, 2x and 3x

The the sum of three parts will be 1x+2x+3x = 120

6x=120

x=120/6

x=20

1x= 20x1=20

2x= 20x2=40

3x= 20x3=60

So 120 is divided in three parts that is 20,40,60

Answer From Gauth Math

MAINLY CONCENTRATED IN THE INDUSTRY.

Answer:

Compounds such as Sulphuric acid and Nitric acid present in polluted air and come into contact with rain water and form acid rain.

Explanation:

Fossil fuels contain such compounds like nitrogen sulphur in addition to carbon. Due to combustion of these fuels,large amount of sulphur dioxide and other compounds are discharged into atmosphere.these oxides dissolve in rain water forming mineral acids.

Answer:

If I am correct the last one because the pressure is decreasing and the temperature is increasing

The levels of carbon dioxide in the atmosphere are estimated to be higher than at any time in the past 420,000 years. That is option B

Carbon dioxide is a very harmful compound which is easily released into the atmosphere through burning of fossil fuels and other carbon compounds in plenty of air.

The released carbon dioxide rises to the upper atmosphere and blocks the radiation of solar energy back into the space. This precipitates a global temperature increase called the greenhouse effect.

According to Intergovernmental Panel on Climate Change (IPCC) in a current research discovered that CO2 concentration in the earth’s atmosphere is higher than at any point during the last 650,000 years. They where able to study this through the study of higher levels of CO2 concentration which coincide with higher temperatures.

Therefore the correct option is B which states that the levels of carbon dioxde in the atmosphere are estimated to be higher than at any time in the past 420,000 years.

Learn more  here:

https://brainly.com/question/1428582

Answer:

=zero degrease, 1 atm)? so the volume of an ideal gas is 22.l/mol at STP this, 22l.4Lis probably the most remembered and least useful number in chemistry

Answer:

B) 22.4

Explanation:

Answer:

O B. Convert the 10 g of NaCl to moles of NaCl.

Explanation:

The formula for finding the molality is m=moles of solute/kg of solvent. The solute for this question is NaCl and the solvent is water.

(10g NaCl)(1 mol NaCl/58.44g NaCl)=0.1711 mol NaCl

58.44 is the molar mass of NaCl

m=0.1711 mol NaCl/2 kg H2O

m=0.085557837

Answer:

milk and starch solution are the colloids, hence these will show the tyndall effect

Answer:

milk and starch solution

Explanation:

Tyndall effect is shown by colloidal solutions. It is not shown by true solutions or suspensions.

Milk and starch solution are colloidal solutions. They show tyndall effect. On the other hand, common salt and copper sulphate solution are true solutions. They do not show tyndall effect.

Answer:

so i think physical change

Explanation:

Heat, Oxygen and Fuel

hope it helps u

Answer:

a friction helps to cause fire and oxygen helps to increase it

hope that helps you please mark brainliest I will follow you

aqueous Magnesium Chloride reacts with liquid Bromide to form aqueous Magnesium Bromide and Chlorine gas

The correct answer is: It contains both an amino functional group and a carboxyl functional group. In a solution, the amino group can

decrease acidity, while the carboxyl group can increase acidity.

The carboxyl functional group is acidic while the amine group is basic.

In an amino acid, there are two functional groups;

The carboxyl functional group is acidic because it contains a replaceable or  ionizable hydrogen ion. The amine group on the other hand is capable of accepting a proton hence it is basic.

Therefore, In a solution, the amine group can  decrease acidity, while the carboxyl group can increase acidity.

https://brainly.com/question/15823799

Answer:

sublimation. During this process, naphthalene being sublime changes into vapours leaving behind impurities. Vapour can be cooled by condensation. This process is very helpful in separating a volatile solid from a non-volatile solid.

ANSWER

2Ba + 2HBr → 2BaBr + H2

2BiCl3 + 3H2S → Bi2S3 + 6HCl

Br2 + 2KI → I2 + 2KBr

4Fe + 3O2 → 2Fe2O3

Answer:

[tex]3Mg _{(s)} + N _{2(g)} → Mg_{3} N _{2(s)}[/tex]

[tex]Ba _{(s)} + 2HBr_{(g)} → BaBr _{2(s)} + H _{2(g)}[/tex]

[tex]2BiCl_{3(s)} + 3H_{2} S _{(g)} → Bi _{2} S _{ 3(g)} + 6HCl _{(g)} \\ [/tex]

[tex]Br_{2(g)} + 2KI _{(g)} → I _{2(g)} +2 KBr _{(g)}[/tex]

[tex]4Fe_{(s)}+ 3O_{2(g)} → 2Fe_{2} O _{3(s)} [/tex]

Answer:

Explanation:

Put the given unit on the bottom of the brackets.

84 miles [tex]\frac{1 km}{0.6 miles}[/tex] = 84/0.6 = 140 km

Answer: C

creativity

Explanation:

C. Because the results of some experiments might not be explained by any

known theories.

Answer:

creativity

Explanation:

Answer:

President Obama signs the Stop Trading on Congressional Knowledge Act in a ceremony at the White House. President Barack Obama delivers remarks prior to signing the STOCK Act in the South Court Auditorium at the Eisenhower Executive Building (EEOB) of the... sorry I have to hurryy

Explanation:

Answer:

Density =mass/Volume

First of all let's find the mass

= 2.5 ×102kg

= 225kg

Then the volume

=4.1 × 103 m3

=422.3m3

225kg /422.3m3

=0.53279659

The density of a piece of metal that has a mass of 2.5 × 102 kg and a volume of 4.1 × 103 m3  will be 6.03  kg/m³ .

Density is defined as the ratio of mass of the object to the volume of the object. Different substances have different densities.

The mathematical expression for density is as follows:

Density=Mass/Volume

The mass of a substance is expressed in kilograms and the volume is expressed in liter.

Thus, the unit of density is kg L⁻¹.

The density of a substance does not depend on the amount of the matter.

Thus, density is an intensive property.

To calculate  the density -:

Given,

Mass= 2.5 ×102 kg=2550 kg

Volume=4.1 × 103 m³=422.3m³

Density=mass/volume

Density=2550/422.3

Density=6.03kg/m³

Hence, 6.03kg/m³ is the  density of a piece of metal .

Learn more about density ,here:

https://brainly.com/question/15164682

#SPJ5

Answer:

show the pictures pls specify

Density=0.97g/mL

Volume=12.5mL

[tex]\\ \sf \longmapsto Density=\dfrac{Mass}{Volume}[/tex]

[tex]\\ \rm\longmapsto Mass=Density(Volume)[/tex]

[tex]\\ \sf \longmapsto Mass=0.97(12.5)[/tex]

[tex]\\ \sf \longmapsto Mass=12.125g[/tex]

Scientific Approach is to identify a problem and finding solution to the problem. There are various steps in scientific approach to solve a problem,

Identify the problem

Analyze the impact

Find available solution

Evaluate different alternative solutions

Choose the best alternative

Apply the solution to the problem

Measure the results

Lets say there is a fire at some place.

There are various solution available, the fire can be slowed down by water, using fire extinguisher or sand.

The best alternative is to use fire extinguisher.

The fire is vanished after the use of fire extinguisher.

Learn more at https://brainly.com/question/24372968

Answer: False

Explanation:

It is not that it must have fossil fuels only because car can also work on hydro power and water. So it should be energy.

must click thanks and mark brainliest

Its fact that a car can also run on water and hydropower means that it does not necessarily need fossil fuels. Therefore,  a car engine must have fossil fuels to work is false.

An extracted and burnt fossil fuel is a hydrocarbon-containing substance that naturally originated in the Earth's crust from the remnants of extinct plants and animals.

Natural gas, crude oil, and coal are the three primary fossil fuels. Fossil fuels are resources that resemble rocks, gases, or liquids that are burnt to produce electricity.

They are employed as energy sources in the electrical and transportation industries and include coal, natural gas, and oil. They are also a major contributor to global warming pollution.

Fossil fuels are used to generate energy, they are burnt to provide heat in homes, electricity in big power plants, and power for engines.

Thus,  a car engine must have fossil fuels to work is false.

To learn more about fossil fuels follow the link below;

https://brainly.com/question/2029072

#SPJ2

Answer and Explanation:

There are 7 base units, m is one of them. Any unit made up of a combination of them is a derived unit. Also, any unit that is defined to be equivalent to a combination of base units is a derived unit.

The particles in the solid are touching with very little space between them. The particles in a liquid usually are still touching but there are some spaces between them. The gas particles have big distances between them.

...

Liquids Solids and Gases:

NON OF THESE

Answer:

Pb2+ (aq) + CrO42-(aq) --> PbCrO4(s) - A precipitation reaction

2 Mg(s) + O2(g) -> 2 MgO(s) - An oxidation-reduction reaction that is also a synthesis reaction

Ag^+ (aq) + 2NH3(aq) --> [Ag(NH3)2]^+ (aq) - A Lewis acid-base reaction the produces a coordination complex

Explanation:

A precipitation reaction is one in which two aqueous reactants yields an insoluble product called a precipitate as shown in reaction 1 above.

In the second reaction Mg is oxidized from zero to + 2 while oxygen was reduced from zero to -2 as the MgO is formed hence the reaction is an oxidation-reduction reaction that is also a synthesis reaction.

In the third reaction, Ag^+ a Lewis acid reacts with NH3, a lewis base to yield the complex [Ag(NH3)2]^+.

Answer:

electrons are knocked off atoms, causing electricity to flow.

Explanation: