What is oxidized in a galvanic cell? O A. The salt bridge O B. The electrolytes O C. The cathode D. The anode​

Answer:

223.4J

Explanation:

Given parameters:

Specific heat capacity of substance  = 0.38J/g°C

Mass of substance  = 42g

Initial temperature  = 25°C

Final temperature  = 39°C

Unknown:

Energy required to raise the temperature  = ?

Solution:

The amount of heat required by the substances can be derived using the expression below;

  H  = m c Δt

H is the amount of heat energy

m is the mass

c is the specific heat capacity

Δt is the change in temperature;

 Δt  = 39°C  -  25°C  = 14°C

 Now insert the parameters and solve;

 H = 42 x 0.38 x 14  = 223.4J

Answer: The density of a material is defined as its mass per unit volume. In this example, each volume of water is different and therefore has a specific and unique mass. The mass of water is expressed in grams (g) or kilograms (kg), and the volume is measured in liters (L), cubic centimeters (cm3), or milliliters (mL).

Explanation: HOPE IT HELPS :)

Answer:

C) It allows your body time to rest.

Explanation:

Hope this helps!

Answer:

C.) It allows your body time to rest.

Explanation:

PLATO

Answer:

Which best describes a codon? 1. a cell structure that gives the master instructions for an organism 2. a segment of DNA that is the basis of heredity in organisms 3. the sequence of three bases that codes for a specific amino acid 4. the basic unit of structure and function of all living things

Answer:

The Correct answer is C

Explanation:

The sequence of three bases which codes for a specified amino acid.

Answer:kingdom 1 i think

Explanation:

Answer:

If we subtract 13.4 from 27.6 we will get 14.2 g.

Answer:

B. NaBr

D. KOH

Explanation:

Below is the solubility rules given for you knowledge.

Salts of

so using the rules above

NaBr , KOH are soluble, Pb(OH)2 is slightly soluble and AgCl is not soluble.

Answer:hope this helps had to guess these are the correct answers =)

Answer:  The balanced chemical equation is given below.

Explanation:

Law of conservation of mass states that mass can neither be created nor be destroyed but it can only be transformed from one form to another form.

This also means that total mass on the reactant side must be equal to the total mass on the product side.

The balanced chemical equation follows:The balanced chemical equation follows:

On reactant side:

Number of carbon atoms = 10

Number of hydrogen atoms = 10

Number of iron atoms = 1

On product side:

Number of carbon atoms = 10

Number of hydrogen atoms = 10

Number of iron atoms = 1

So, the balanced chemical equation is given above.

Answer:

#1. Balanced equation: 2C₅H₅ + Fe → Fe(C₅H₅)₂

#2. Type of reaction: Synthesis reaction

Explanation:

Balanced equations are equations that obey the law of conservation of mass.

When an equation is balanced the number of atoms of each element is equal on both side of the equation.

Equations are balanced by putting appropriate coefficients on the reactants and products.

In our case, we are going to put coefficients 2, 1 and 1.

Thus, the balanced equation will be;

2C₅H₅ + Fe → Fe(C₅H₅)₂

This type of a reaction is known as synthesis reaction, in which two or more reactants or compounds combine to form a single compound or product.

Answer: condensing

Explanation:

Answer:

C

Explanation:

Answer:

See explanation and image attached

Explanation:

The standard cell potential at 298 K is given by;

E°cathode - E°anode

Hence;

E°cell = 0.34 V - (-0.76 V)

E°cell = 0.34 V + 0.76 V

E°cell = 1.1 V

To reduce Zn^2+ to Zn then Zn must be the cathode, hence;

E°cell = (-0.76 V) - 0.34 V

E°cell = -1.1 V

Answer:

If my memory serves me correctly, the answer would be OPTION 3

Explanation:

May I have brainliest please? :)

Answer:

Frequency of photon is 0.513×10¹⁵ s⁻¹

Explanation:

Given data:

Energy of photon = 3.4×10⁻¹⁹ J

Frequency of photon = ?

Planck's constant = 6.63 × 10⁻³⁴ Js

Solution:

Formula:

E = hf

3.4×10⁻¹⁹ J = 6.626 × 10⁻³⁴ Js × f

f =  3.4×10⁻¹⁹ J / 6.626 × 10⁻³⁴ Js

F = 0.513×10¹⁵ s⁻¹

Frequency of photon is 0.513×10¹⁵ s⁻¹.

Answer:

Explanation:

The percentage error of a certain measurement can be found by using the formula

[tex]P(\%) = \frac{error}{actual \: \: number} \times 100\% \\ [/tex]

From the question

error = 500 - 499.7 = 0.3

actual volume = 500 mL

We have

[tex]p(\%) = \frac{0.3}{500} \times 100 \\ = \frac{3}{50} \\ [/tex]

We have the final answer as

Hope this helps you

Answer:

D. both use a strong, non-nucleophilic base such as LDA and use a low temperature.

Explanation:

The more stable enolate is the thermodynamic enolate, and a less stable is known as the kinetic enolate.

The less stable enolate has a less substituted product, while the more stable product has a more substituted product.

Now, to form a kinetic enolate, we need to choose a strong, non-nucleophilic base such as LDA to attract hydrogen from the less substituted site. However, an increase in temperature results in an increase in a reaction, which leads to the formation of a stable product.

So, to form the kinetic enolate, a low temperature will be required.

Thus, To form a kinetic enolate, both use a strong, non-nucleophilic base such as LDA and use a low temperature.

Answer: Colombia

Explanation:

Answer:

violet

Explanation:

Waves with a short wavelength have the most energy. Red waves have a relatively long wavelength (in the 700 nm range), and violet waves are much shorter - roughly half that. Because violet waves have the shortest wavelength of the visible light spectrum, they carry the most energy (google)

Answer:

Because the same amount of sugar is still there. The solid sugar crystals break apart in water as the sugar dissolves, but the individual sugar particles or molecules are still present and do not change as a result of dissolving in the water. The combined mass of the sugar and water shouldn't change.

Answer:

1.  An apple is something that has matter.

2. Light does not have matter. It neither has mass or takes up and space.

3. Physical changes only change the appearance of a substance, not its chemical composition. Chemical changes cause a substance to change into an entirely substance with a new chemical formula. Chemical changes are also known as chemical reactions.

4. A chemical reaction is usually accompanied by easily observed physical effects, such as the emission of heat and light, the formation of a precipitate, the evolution of gas, or a color change. Absolute confirmation of a chemical change can only be validated by chemical analysis of the products!

5. A precipitate is a solid that forms out of solution.

6. In simple terms, the endothermic reactions absorb energy from the surrounding that is in the form of heat. On the other hand, an exothermic reaction releases energy into the surrounding of the system.

Explanation:

Matter is anything that has mass and takes up volume.

Answer:

1. some thing that has matter is an apple, a person,a table. things that does 2.not Light.,Sound.,Heat.Energy.Gravity.Time.A Rainbow.Love.

3. Physical changes only change the appearance of a substance, not its chemical composition. Chemical changes cause a substance to change into an entirely substance with a new chemical formula. Chemical changes are also known as chemical reactions.

4.A chemical reaction is usually accompanied by easily observed physical effects, such as the emission of heat and light, the formation of a precipitate, the evolution of gas, or a color change. Absolute confirmation of a chemical change can only be validated by chemical analysis of the products!

5.Precipitate: In chemistry, a solid formed by a change in a solution, often due to a chemical reaction or change in temperature that decreases solubility of a solid. In meteorology a precipitate is liquid or solid water (rain, snow, etc.) falling from the sky.

6.n simple terms, the endothermic reactions absorb energy from the surrounding that is in the form of heat. On the other hand, an exothermic reaction releases energy into the surrounding of the system.

hope this help plz give me a thxs and brainlyest and a five star thx and you welcome let me know if this helped

Answer:

Plum Pudding Model.

Explanation:

I just know.

Answer:

I’m very confused can you clerify that?

Explanation:

Answer:my bit,cu,mghg

Explanation:

Answer:

The correct answer is C. element

Explanation:

The sample cannot be an element because an element - or elemental substance - cannot be decomposed into simpler substances. Thus, it cannot be composed by differents types of atoms. For example, an element is carbon (C).

As the sample contains three types of atoms, it can be a compound, a molecule or a mixture, because they can be composed by different types of atoms - of different chemical elements. For example, the sample could contain the element carbon (C) combined with other elements, for example oxygen (O) or hydrogen (H), amoing others.

The sample can not be an element due to having only one type of atom.

The sample can be mixture, compound and molecule except element because element is formed from only one type of atoms which can not be broken down into simpler one. The sample contains three types of atoms which means it may be mixture, compound or molecule.

The reason behind this is that mixture, compound and molecule can be made up of three atoms whereas the element can't so we can conclude that sample can not be an element.

Learn more: https://brainly.com/question/19389549

Answer:

B. a covalent bond.

When an oceanic plate and a continental plate collide, both will subduct. Therefore, option 3 is correct.

Oceanic plates are plates found beneath the ocean. As previously stated, oceanic plates are denser than continental plates. This is due to the fact that they are made of denser rocks. Basalt is the most common material found in oceanic plates.

When compared to continental crust, oceanic crust formed at spreading ridges is relatively homogeneous in thickness and composition.

Because oceanic crust is naturally denser, when an oceanic plate converges with a continental plate, the oceanic crust will always subduct beneath the continental crust. Convergent boundaries are frequently linked to larger earthquakes and increased volcanic activity.

Thus, option 3 is correct.

To learn more about an oceanic plate, follow the link;

https://brainly.com/question/13569781

#SPJ6

Answer:

na

Explanation:

because it has more atomic radius in it

Answer:

3 bonds are needed.

Explanation:

The electrons that are involved in chemical bonding are those in the outer shell of the highest energy level of the atom. The electron configuration of nitrogen (N) is 1s²2s²2p³. That means thy at each nitrogen atom has 5 valence electrons: 2 electrons in the 2s orbital and 3 electrons in the 2p orbital. To fullfil the octet, each nitrogen atom needs 3 electrons. So, they can share each other 3 electrons to form 3 simple bonds. Therefore, the nitrogen molecule (N₂) has 3 bonds involving 6 bonding electrons or a triple bond.

Answer:

hope this helps

Explanation:

see pictures try to put them in order

Answer:

because tiles conduct energy faster than carpet

Explanation:

when it is winter tiles are as coled as ice an carpet is barley coled when left a tile out in the sun I would burn like a stove but if you left a carpeted it would be warm

Answer:

B

Explanation:

Answer:

radiation

Explanation:

because it move from one particle to another and place to place

Answer:

metal calcium or (Ca).

Explanation:

For example, the metal calcium (Ca) and the nonmetal chlorine (Cl) form the ionic compound calcium chloride (CaCl2). In this compound, there are two negative chloride ions for each positive calcium ion