What could be used as another word for electrical potential
A.wattage

B.voltage

C.current

D.power

What Could Be Used As Another Word For Electrical Potential A.wattageB.voltageC.current D.power

Answers

Answer 1

Answer:

hey mate

answer is probably voltage as per me

as

Explanation:

Voltage, electric potential difference, electric pressure or electric tension is the difference in electric potential between two points, which is defined as the work needed per unit of charge to move a test charge between the two points

Answer 2
Answer is B: voltage

Related Questions

when an apple falls towards the earth the earth moves up to meet the apple. Is it true? If yes, why is the earth motion not noticeable ?

Answers

Answer:

Yes, this is true.

-- While the apple is falling, the same gravitational force acts on both the apple and the Earth.

-- The mass of the apple is somewhere in the neighborhood of 1/4 kg.

-- The mass of the Earth is about 5.972 x 10²⁴ kg.

-- Since the Earth has roughly 2.389 x 10²⁶ times as much mass as the apple has, the apple has roughly 2.389 x 10²⁶ greater acceleration than the Earth has, and moves roughly 2.389 x 10²⁶ times as far down as the Earth moves up, before they smack together.

-- That's why you don't notice the Earth's motion.

-- Also, you're standing on the Earth, moving up with it, toward the apple.  Maybe it would be different if you were sitting on the apple, riding it down to the ground, and you were able to notice the motion of the ground coming up to meet you at a speed that's 0.00000000000000000000000000419 of YOUR speed.  

Answer From Gauth Math

A voltage of 120 volts is applied to a 200 Ω resistor. Calculate the current through the resistor.

Answers

Answer:

I = 0.6A

Explanation:

Ohm's Law

V = I*R

I = V/R

I = 120V/200ohms

I = 0.6A

A 92.45 kg baseball player slides to a stop at third base. The coefficient of kinetic friction between the player and the ground is
0.68. Her speed at the start of the slide is 6.87 m/s.
(a) Calculate her acceleration during the slide.
(b) How long (in time) does she slide until she stops?

Answers

a) Her acceleration during the slide is -6.67 m/s².

b) She slides 1.03 seconds until she stops.

a) We can find her acceleration during the slide with Newton's second law:

[tex] F = ma [/tex]                        

Where:

F: is the force    

m: is the mass = 92.45 kg

a: is the acceleration =?

The force acting on the baseball player is equal to the friction force ([tex]F_{\mu}[/tex]), and it is negative because it is in the opposite direction to the motion:

[tex] -\mu N = ma [/tex]

[tex] -\mu mg = ma [/tex]

[tex] a = -\mu g [/tex]

Where:

N: is the normal force = mg

μ: is the coefficient of kinetic firction = 0.68

g: is the acceleration due to gravity = 9.81 m/s²

Hence, her acceleration during the slide is:

[tex] a = -0.68*9.81 m/s^{2} = -6.67 m/s^{2} [/tex]

b) We can calculate how long does she slide until she stops with the following kinematic equation:

[tex] v_{f} = v_{0} + at [/tex]

Where:

[tex] v_{f} [/tex]: is the final speed = 0 (when she stops)

[tex] v_{0} [/tex]: is the initial speed = 6.87 m/s

t: is the time =?

Then, the time is:

[tex] t = -\frac{v_{0}}{a} = -\frac{6.87 m/s}{-6.67 m/s^{2}} = 1.03 s [/tex]

You can learn more about Newton's second law here: https://brainly.com/question/19860811?referrer=searchResults

I hope it helps you!

You walk 100m due north. You then turn and walk 55m due east. You then make another turn and walk 12m due south. What is the resultant vector for your walk?

Answers

Answer:

Explanation:

Important here is to know that due north is a 90 degree angle, due east is a 0 degree angle, and due south is a 270 degree angle. Then we find the x and y components of each part of this journey using the sin and cos of the angles multiplied by each magnitude:

[tex]A_x=100cos90\\A_x=0\\B_x=55cos0\\B_x=55\\C_x=12cos270\\C_x=55[/tex]

Add them all together to get the x component of the resultant vector, V:

[tex]V_x=55[/tex]

Do the same to find the y components of the part of this journey:

[tex]A_y=100sin90\\A_y=100\\B_y=55sin0\\B_y=0\\C_y=12sin270\\C_y=-12[/tex]

Add them together to get the y component of the resultant vector, V:

[tex]V_y=88[/tex]

One thing of import to note is that both of these components are positive, so the resultant angle lies in QI.

We find the final magnitude:

[tex]V_{mag}=\sqrt{55^2+88^2}[/tex] and, rounding to 2 sig dig's as needed:

[tex]V_{mag}=[/tex] 1.0 × 10² m; now for the direction:

[tex]\theta=tan^{-1}(\frac{88}{55})=[/tex] 58°

differentiate between Physical and chemical changes with example
please help me !

Answers

Answer:

Physical change is a temporary change. A chemical change is a permanent change

examples of physical change are freezing of water, melting of wax, boiling of water, etc. A few examples of chemical change are digestion of food, burning of coal, rusting, etc.

I HOPE THIS WILL HELP YOU

HAVE A GREAT DAY :)

Derived quantities depend on...........physical quantity​

Answers

Derived quantities depend on.( fundamental)..........physical quantity

Are you from Nepal?

Answer:

Derived quantities depend on two or more physical quantity.

Which element would have the lowest electronegativity? (1 point)

an element with a small number of valence electrons and a large atomic radius

an element with a small number of valence electrons and a small atomic radius

an element with a large number of valence electrons and a small atomic radius

an element with a large number of valence electrons and a large atomic radius

Answers

Answer:

an element with a small number of valence electrons and a large atomic radius

list three types of actions that can contribute to a sustainable world

Answers

- reduce, reuse, recycle
- eat locally
- plant seeds
- donate items
-save water

What does vitamin c do for our body?

Answers

Answer:

necessary for the growth, development and repair of all body tissues. it's involved in many body functions, including formation of collagen, absorption of iron, the proper functioning of the immune system, wound healing, and the maintenance of cartilage, bones, and teeth.

Explanation:

Answer:

Vitamin C act as antioxidant which protect our cell from damaging caused by radicals.

A force of 150N at an angle of 60 degree to the horizontal to pull a box through a distance of 50m calculate the work done

Answers

Force=150NAngle=60°Displacement=50m

[tex]\boxed{\sf W=Fscos\Theta}[/tex]

[tex]\\ \sf\longmapsto W=150(50)cos 60[/tex]

[tex]\\ \sf\longmapsto W=7500\times \dfrac{1}{2}[/tex]

[tex]\\ \sf\longmapsto W=3750J[/tex]

A 20 kg truck drives in a circle of radius 4 m at 10m/s. What is the
centripetal force on the truck?
A. 500 N
B. 650 N
C. 350 N
D. 800 N

Answers

Mass=m=20kgRadius=r=4mVelocity=10m/s=v

We know

[tex]\boxed{\sf F_c=\dfrac{mv^2}{r}}[/tex]

[tex]\\ \sf\longmapsto F_c=\dfrac{20(10)^2}{4}[/tex]

[tex]\\ \sf\longmapsto F_c=\dfrac{20(100)}{4}[/tex]

[tex]\\ \sf\longmapsto F_c=\dfrac{2000}{4}[/tex]

[tex]\\ \sf\longmapsto F_c=500N[/tex]

The centripetal force on the truck can be determined from the mass, velocity and the radius of the circular path. The centripetal force acting on the truck is 500 N. Hence, option A is correct.

What is centripetal force?

Centripetal force is a type force acting on an object traveling through a circular path. The centripetal force is the rotational analogue of the linear force.

The centripetal force acting on an object is related to the mass, velocity and radius of the circular path is given by:

Fc =  mv ²/r

Given that, mass of truck = 20 Kg

radius of circle = 4 m

velocity = 10 m/s

Then, centripetal force Fc = 20 kg ×  10² m/s / 4 m = 500 N

Therefore, the centripetal force on the truck is 500 N.

Find more on centripetal force:

https://brainly.com/question/14249440

#SPJ2

when we jump off a boat towards the shore the boat moves back why​

Answers

its not in nurtal or park

Cómo puede contribuir el baloncesto a tu vida y al medio ambiente?
Ayudaaa porfaa

Answers

El baloncesto es un deporte muy completo, que puede beneficiar mi vida al mejorar mi salud mediante el ejercicio físico, a la vez que puede mejorar el medio ambiente a través de la protección de espacios abiertos para la práctica de este y otros deportes.

El baloncesto es un deporte inventado en 1891 por James Naismith en Estados Unidos. En el, dos equipos de cinco jugadores y siete suplentes cada uno competirán entre sí. El objetivo del juego es capturar la pelota y lanzarla a través de un aro de hierro - la canasta - y evitar que el oponente haga lo mismo.

Aprende más acerca del baloncesto en https://brainly.com/question/21357902.

Which of the following would cause the force of kinetic friction to increase?
A. A decrease in the normal force
B. An increase in us
C. A decrease in lk
D. An increase in the normal force

Answers

The correct answer is D

Answer:

Increase in μk

Explanation:

different ans set

How Do Manometers Work? steps by steps

Answers

Explanation:

A manometer is a device that measures air pressure using a container with a "U"-shaped tube open at one or both ends. In a closed manometer, a sample of gas is introduced into one end, which is then capped. ... This pressure represents the positive or negative difference between the gas pressure and atmospheric pressure

Answer:

I hope this helps

In the manometer, one end connects to a gas-tight seal to test the pressure source.

2. In addition, the other end of the tube is left open to the atmosphere and it will be subjected to the pressure of approximately 1 atmosphere (atm).

3. Besides, the test pressure is greater than the pressure of 1 atm (atmosphere) the liquid in the column will be forced down by the pressure.

4. Furthermore, it will cause the liquid of the reference column to rise by an equal amount.

What are the phases of scientific method?

Answers

The scientific method has five basic steps, plus one feedback step:
Make an observation.
Ask a question.
Form a hypothesis, or testable explanation.
Make a prediction based on the hypothesis.
Test the prediction.
Iterate: use the results to make new hypotheses or predictions.

Ploughing field with harrow pulled by a tractor is a modern technology​

Answers

Ploughing field with harrow pulled by a tractor being a modern technology​ is true.

What is Technology?

This involves the use of scientific knowledge to tackle different life problems and has different sectors.

Ploughing field with harrow pulled by a tractor involves machines and not manual labour which makes it a modern technology.

Read more about Technology here https://brainly.com/question/7788080

#SPJ1

State the relative position for the sun and earth during the lunar eclipse (ASAP)

Answers

Answer:

Solar eclipses result from the Moon blocking the Sun relative to the Earth; thus Earth, Moon and Sun all lie on a line. Lunar eclipses work the same way in a different order: Moon, Earth and Sun all on a line. In this case the Earth's shadow hides the Moon from view.

A 20 kg truck drives in a circle of radius 4 m at 10m/s. What causes
the circular motion?
A. Normal Force
B. Friction
C. Tension
D. Gravity

Answers

Answer:

Normal force

Explanation:

The force is centipetral force

Calculating :-

Mass=m=20kgRadius=r=4mVelocity=10m/s=v

We know

[tex]\boxed{\sf F_c=\dfrac{mv^2}{r}}[/tex]

[tex]\\ \sf\longmapsto F_c=\dfrac{20(10)^2}{4}[/tex]

[tex]\\ \sf\longmapsto F_c=\dfrac{20(100)}{4}[/tex]

[tex]\\ \sf\longmapsto F_c=\dfrac{2000}{4}[/tex]

[tex]\\ \sf\longmapsto F_c=500N[/tex]

convert 12 kg into gram​

Answers

Answer:

12000gram

Explanation:

1kg=1000gram

so, 12kg=12x1000

12kg=12000gram

Given amount=12kg

[tex]\boxed{\sf 1kg=1000g}[/tex]

[tex]\\ \sf\longmapsto 12kg=12(1000)[/tex]

[tex]\\ \sf\longmapsto 12kg=12000g[/tex]

An element is highly conductive, highly reactive, soft, and lustrous. The element most likely belongs to which group?(1 point)

transition metals
noble gases
metalloids
alkali metals

Answers

Answer:

Alkali metals

Explanation:

Elements in this group are highly reactive, soft, lustrous and highly conductive.

An element which is highly conductive, highly reactive, soft, and lustrous is most likely an alkali metal.

Alkali metals are in group 1 of the Periodic table which means that they have only a single valence electron.

This causes them to be soft and highly reactive because:

The single valance electron leads to weak bonds amongst the element's atoms which makes them softThe elements want to lose the single valance electron so as to become stable so they will react with other elements to give away the electron.

Examples of alkali electrons include:

Lithium Sodium Potassium etc

In conclusion therefore, alkali metals are highly reactive and soft and so the element described above is most likely an alkali metal.

Find out more at https://brainly.com/question/18722874.

A piston releases 18 J of heat into its surroundings while expanding from 0.0002 m^3 to 0.0006 m^3 at a constant pressure of 1.0 x 10^5 Pa. What are the correct values for heat and work for the piston?​

Answers

Answer:

value of heat is 18 J

2. step by step

formular w=p(volume1-volume2)

w= 1.0×10^5(0.0006-0.0004)

w= 40 J

I need the answer quick I’ll mark u as brainlist!

Answers

Answer: option c

Because the height is increasing then decreasing

According to Hooke's law
(a) stress x strain = constant
(b) stress / strain = constant
(c) strain / stress = constant
(d) stress = strain

Answers

Answer:

According to Hook's law, we know,

strain/stress =Constant

Explanation: So, the ratio between stress and strain is always constant.

So, if stress is increased, then strain changes in that way so that this ratio always remains constant.

Part B After producing electricity in many different ways, describe what causes electricity to flow in the coil? In your response, describe the types of forces acting on the electrons and how they result in movement.

Answers

Explanation:

If a coil of wire is placed in a changing magnetic field, a current will be induced in the wire. ... A changing magnetic field through a coil of wire therefore must induce an emf in the coil which in turn causes current to flow.

Due to the flow of the current run, the coil magnetic field is produced. Magnetic fields result in magnetic force.

What is electric force?

The electric force between the two charges is directly propotional to the product of the charge and inversly propotional to the square of the distance between them.

A current will be generated in a wire coil if it is put in a changing magnetic field. As a result, a changing magnetic field through a coil of wire must create an emf in the coil, causing the current to flow.

A current is induced in a coil of wire when it is put in a changing magnetic field. Something generates an electric field that drives the charges around the wire, causing the current to flow.

Hence due to the flow of the current in the coil magnetic field is produced.

To learn more about the electric force refer to the link;

https://brainly.com/question/1076352

A 5kg block is pushed 3m at a constant velocity up a vertical wall by a constant force applied at an angle of 37 degree with the horizontal, if the coefficient of kinetic friction between the block and the wall is 0.3. what is the work done by the force on the block?

Answers

The work done by the force on the block is:

[tex]W=135.41*3=406.23 \: J[/tex]

The direction of motion here is in the y-direction, so we need to find the component of the force in this direction.

Using trigonometric functions:

[tex]F_{y}=Fsin(37)[/tex]

This component is in the positive y-direction.

Now, there is a friction force between the block and the wall, so we need to find the friction force.

[tex]F_{f}=\mu N[/tex]

Where:

μ is the coefficient of kinetic frictionN is the normal force (Here N = Fcos(37))

Let's use the first Newton's Law to get F.

F(y) is upward (+) and F(f) and the weight is downward (-).

[tex]F_{y}-F_{f}-W=0[/tex]

[tex]F_{y}-F_{f}=mg[/tex]

Factoring F in the left side:

[tex]F(sin(37)-\mu cos(37))=mg[/tex]    

[tex]F=\frac{mg}{sin(37)-\mu cos(37)}[/tex]  

[tex]F=\frac{5*9.81g}{sin(37)-(0.3*cos(37))}[/tex]  

[tex]F=135.41\: N[/tex]    

Therefore, the work done will be:

[tex]W=Fd[/tex]  

[tex]W=135.41*3=406.23 \: J[/tex]  

You can learn more about work definition here:

https://brainly.com/question/17231715          

Friction causes wastage of energy and hence increases fuel consumption.
Suggest different ways to reduce friction and promote responsible
consumption of fuel and energy.

Answers

Friction can be defined as a type of force that prevents two smooth surfaces from sliding together on each other. Friction is a strong force that opposes motion when two surfaces come in contact with each other.

The different methods/ways to reduce friction include;

- Application of lubricant to surfaces

- Streamlined bodies; this goes a long way in preventing friction between two bodies.

- Decrease in weight; reducing the amount of weight on a substance can also help to reduce friction

- Applying wheels to objects that move/roll on the ground.

Learn more via the link below;

https://brainly.com/question/22353599?referrer=searchResults


. Calculate the momenturn of a bus of mass 2000 kg moving with a velocity of 20 m/s​

Answers

Mass=2000kgVelocity=20m/s

We know

[tex]\boxed{\sf Momentum=Mass\times Velocity}[/tex]

[tex]\\ \sf\longmapsto Momentum=2000(20)[/tex]

[tex]\\ \sf\longmapsto Momentum=40000kgm/s[/tex]

what is the length x of the side of the triangle below

Answers

Answer:

you didn't post any triangles. Thus, the question could not be answered.

Answer:

The given triangle is a right triangle.

The length of the hypotenuse is 2.52.5 units.

The given angle is 39\degree39° .

The unknown side xx is adjacent to the given angle.

We can therefore use the cosine function to find xx .

Recall the mnemonics CAH.

This means that;

\cos\theta=\frac{Adjacent}{Hypotenuse}cosθ=

Hypotenuse

Adjacent

This implies that,

\cos39\degree=\frac{x}{2.5}cos39°=

2.5

x

We multiply both sides by 2.52.5 to get,

2.5\cos39\degree=x2.5cos39°=x

x=2.5(0.7771)x=2.5(0.7771)

We evaluate to get

x=1.94x=1.94

Therefore the length xx of the side of the triangle is 1.91.9 units to the nearest tenth.

can ya pls answer dis!

Answers

Answer:

Here Is An OverView of What I Know About Science:

To understand what science is, just look around you. What do you see? Perhaps, your hand on the mouse, a computer screen, papers, ballpoint pens, the family cat, the sun shining through the window …. Science is, in one sense, our knowledge of all that — all the stuff that is in the universe: from the tiniest subatomic particles in a single atom of the metal in your computer's circuits, to the nuclear reactions that formed the immense ball of gas that is our sun, to the complex chemical interactions and electrical fluctuations within your own body that allow you to read and understand these words. But just as importantly, science is also a reliable process by which we learn about all that stuff in the universe. However, science is different from many other ways of learning because of the way it is done. Science relies on testing ideas with evidence gathered from the natural world. This website will help you learn more about science as a process of learning about the natural world and access the parts of science that affect your life.

Explanation:

Science helps satisfy the natural curiosity with which we are all born: why is the sky blue, how did the leopard get its spots, what is a solar eclipse? With science, we can answer such questions without resorting to magical explanations. And science can lead to technological advances, as well as helping us learn about enormously important and useful topics, such as our health, the environment, and natural hazards. Without science, the modern world would not be modern at all, and we still have much to learn. Millions of scientists all over the world are working to solve different parts of the puzzle of how the universe works, peering into its nooks and crannies, deploying their microscopes, telescopes, and other tools to unravel its secrets. I Hope This Helps.

Other Questions
2067 Supp Q.No. 2a Find the sum of all the natural numbers between 1 and 100 which are divisible by 5. Ans: 1050 (b) An economy has an agricultural industry and a textile industry. Each unit of agricultural output requires 0.4 unit of agricultural input and 0.1 unit of textiles input. Each unit of textiles output requires 0.1 unit of agricultural input and 0.2 unit of textiles input. (i) Write the technology matrix for this economy. [2 marks](ii) If surpluses of 5 units of agricultural products and 195 units of textiles are desired, find the gross production of each industry what is the answer please help convert 7 and 1/3 into a improper fraction if i have a cellphone and you have an i-pad, whats the brand of your gadget? can someone compare the point of view of A Simple Act with the point of view of An Invisible Thread. Yesenia drove 45.3 miles on Monday and 3.8miles more on Tuesday. How many miles did shedrive in all? A manufacturer of computer memory chips produces chips in lots of 1000. If nothing has gone wrong in the manufacturing process, at most 7 chips each lot would be defective, but if something does go wrong, there could be far more defective chips. If something goes wrong with a given lot, they discard the entire lot. It would be prohibitively expensive to test every chip in every lot, so they want to make the decision of whether or not to discard a given lot on the basis of the number of defective chips in a simple random sample. They decide they can afford to test 100 chips from each lot. You are hired as their statistician.There is a tradeoff between the cost of eroneously discarding a good lot, and the cost of warranty claims if a bad lot is sold. The next few problems refer to this scenario.Problem 8. (Continues previous problem.) A type I error occurs if (Q12)Problem 9. (Continues previous problem.) A type II error occurs if (Q13)Problem 10. (Continues previous problem.) Under the null hypothesis, the number of defective chips in a simple random sample of size 100 has a (Q14) distribution, with parameters (Q15)Problem 11. (Continues previous problem.) To have a chance of at most 2% of discarding a lot given that the lot is good, the test should reject if the number of defectives in the sample of size 100 is greater than or equal to (Q16)Problem 12. (Continues previous problem.) In that case, the chance of rejecting the lot if it really has 50 defective chips is (Q17)Problem 13. (Continues previous problem.) In the long run, the fraction of lots with 7 defectives that will get discarded erroneously by this test is (Q18)Problem 14. (Continues previous problem.) The smallest number of defectives in the lot for which this test has at least a 98% chance of correctly detecting that the lot was bad is (Q19)(Continues previous problem.) Suppose that whether or not a lot is good is random, that the long-run fraction of lots that are good is 95%, and that whether each lot is good is independent of whether any other lot or lots are good. Assume that the sample drawn from a lot is independent of whether the lot is good or bad. To simplify the problem even more, assume that good lots contain exactly 7 defective chips, and that bad lots contain exactly 50 defective chips.Problem 15. (Continues previous problem.) The number of lots the manufacturer has to produce to get one good lot that is not rejected by the test has a (Q20) distribution, with parameters (Q21)Problem 16. (Continues previous problem.) The expected number of lots the manufacturer must make to get one good lot that is not rejected by the test is (Q22)Problem 17. (Continues previous problem.) With this test and this mix of good and bad lots, among the lots that pass the test, the long-run fraction of lots that are actually bad is (Q23) what is the product of (3 + x) and (2x 5) This type of behavior is important to...? Complete the correct form of verb in parenthesis. El profesor busca un alumno que (saber) usar una computadora.La muchacha tiene amigo que (saber) hablar japons. Ella es la mejor profesora que (ensear) en esta escuela. No hay nada que (tener) el sabor tan delicioso como el chocolate. Yo s quin (ser) el mejor jugador de bsquetbol de esta equipo. identify words with positive and negative connotation lawn gardenyardvegetation (please help i will list you as brainlys) please help me!simplify Please help from 1 to 10 please How does the capacitance of capacitor vary with the dielectric resistant of a medium Which type of economy is criticized for equality being sacrificed for the sake of economic liberty and that minorities are at particular risk hat is the measure of the unknown angle?Image of a straight angle divided into two angles. One angle is ninety seven degrees and the other is unknown pls What percent of ones daily caloric intake should come from carbohydrates? A. 10 - 35% B. 20 - 35% C. 45 - 65% D. 70 - 75% Please select the best answer from the choices provided. Hi! question 5-10 please help me I'd appreciate it so much!! (no links) Which of the following pairs of triangles can be proven similar through SAS similarity? Question options: A) image B) image C) image D) image