Water glass is found in

A. Liquid form at room temperature

B. solid state at room temperature

c. semi liquid form at room temperature

D. None of above​

Answer:

depends on the element it's reacting with..

Explanation:

if the another element requires less energy to loose electron then zinc will become negatively charged and hence becomes acidic radical..

normally if it is reacting with element with valency 4 and Atomic number less than it(Ti,Si,C) then it will lose electron and gain positive sign and henve becomes basic radical..

Answer:

the product of q in the reaction below is Nacl

Answer:

International System of Units (SI)

Explanation:

I hope it helps :)

Answer:

a measuring cylinder containing water only.

Explanation:

If we want to measure the volume of an irregular object. We need a properly calibrated measuring cylinder filled with water of known volume.

The irregular object is now inserted into the measuring cylinder containing water and the change in the volume of water is noted. The volume of the irregular object is now obtained as;

New volume of water - initial volume of water.

Hence, only a measuring cylinder filled with water is required to measure the volume of a small irregularly- shaped stone.

The species that is reduced in the reaction is Fe. Option B

The process by which an atom gains an electron, thereby lowering or decreasing its oxidation number. Basically, the positive character of the species is reduced. Reduction occurs when an atom gains one or more electrons during a chemical reaction. This means that the oxidation number decreases. This is when an atom gains an electron because electrons have a negative charge.

Acquires a negative charge that reduces the oxidation number. Reduction involves a half-reaction in which a chemical species reduces its oxidation number, usually by gaining an electron. The other half of the reaction involves oxidation in which electrons are lost. Reduction and oxidation together form a redox reaction. As the oxidation number increases, the atom is oxidized, and as the oxidation number decreases, the atom is reduced.

Learn more about The reaction here:-https://brainly.com/question/14912355

#SPJ1

Answer: Ag+

Explanation: I just took the test.

Answer:

Nucleus is the answer

A micrograph of animal cells, showing the nucleus (stained dark red) of each cell. Known as the cell's “command center,” the nucleus is a large organelle that stores the cell's DNA (deoxyribonucleic 

Answer:

nucleus is the part of a cell directs the cells Activities and holds it's DNA

Answer:

a) Barney wants to repeat the rutheford experiment

b) the element will be in row 8 column 1 being an alkali metal

c) it should be a radioactive element, with a lot of mass

Explanation:

n this exercise they indicate that the particle Gz has atomic number 119 and atomic mass 305 amu, when reviewing the element periodicity table with this atomic number it has not yet been discovered, it should be in row 8 column 1 therefore it should be an alkali metal .

Therefore, it has only one electron in its last orbit.

a) Barney wants to repeat the rutheford experiment

b) the element will be in row 8 column 1 being an alkali metal

c) it should be a radioactive element, with a lot of mass

Answer:

An indication of calories consumed during anaerobic energy production

Explanation:

RER stands for respiratory exchange ratio, which is the ratio of the volume of carbon dioxide, CO₂, produced to the volume of oxygen, O₂ used in metabolism. RER is used in determining the respiratory quotient during aerobic exercise and rest, from which it can be determined if carbohydrate or fat is the source of fuel consumed in the production of energy for the body through metabolism

Therefore, the answer that is not correct is an indication of calories consumed during anaerobic energy production

Answer:

It should be the answer D. A type of atom

Explanation:

A model is a "synthetic coordination entity that closely approaches the properties of a metal ion in a protein"

An ion is a charged atom.

Answer:

the degree of ionization in water is high

Explanation:

The term pH is defined as the negative logarithm of hydrogen ion concentration.

Hence;

pH = -log[H^+]

The pH scale shows the degree of acidity or alkalinity of a solution. A solution of pH 1 is a strong acid. A strong acid dissociates completely in solution.

Hence, acid U has a high degree of ionization in water.

Isotopes are atoms of the same element that have different masses. The relative atomic mass (am) is a weighted average that takes into account the abundance of each isotope. We can calculate the relative atomic mass using the following expression.

[tex]am = \frac{\Sigma m_i \times ab_i}{100}[/tex]

where,

For Gallium,

[tex]70.59 amu = \frac{69 amu\ x + 71 amu\ y}{100}[/tex]     [1]

where "x" and "y" are the unknown abundances.

We also know that the sum of both abundances must be 100%.

x + y = 100

y = 100 - x   [2]

If we replace [2] in [1], we get

[tex]70.59 amu = \frac{69 amu\ x + 71 amu\ (100-x)}{100} \\7059 amu = -2 amu\ x + 7100amu \\x = 20.5[/tex]

Then, in [2]

y = 100 - x = 100 - 20.5 = 79.5

In conclusion, Ga-69 has an abundance of 20.5% and Ga-71 has an abundance of 79.5%.

You can learn more about isotopes in: https://brainly.com/question/21536220?referrer=searchResults

Answer:

Step 1: Write a balanced chemical equation of the reaction

Step 2: Convert the mass of glucose given to moles of glucose by dividing with the molar mass of glucose, 180 g/mol:

Step 3: Using the mole ratio in the equation of reaction, determine the moles of CO₂ produced:

Step 4: Convert moles of CO₂ to volume in litres of CO₂ at STP:

Explanation:

Fermentation is a complex chemical process whereby microorganisms such as yeast are used in converting carbohydrates such as glucose into ethanol and carbon dioxide under anaerobic conditions:

Step 1: Write a balanced chemical equation of the reaction

Theequation of the fermentation of glucose, C₆H₁₂O₆ at STP is as follows:

C₆H₁₂O₆ (aq) ----> 2 C₂H₅OH (l) + 2 CO₂ (g)

Step 2: Convert the mass of glucose given to moles of glucose by dividing with the molar mass of glucose, 180 g/mol:

Moles of glucose = mass of glucose given/molar mass of glucose = x g/ 1180 g/ mol = x moles of glucose

Step 3: Using the mole ratio in the equation of reaction, determine the moles of CO₂ produced:

From the equation of reaction, 1 mole of C₆H₁₂O₆ produces 2 moles of CO₂.

Therefore, x moles of C₆H₁₂O₆ will produce 2x moles of CO₂

Step 4: Convert moles of CO₂ to volume in litres of CO₂ at STP:

1 mole of a gas at STP has a volume of 22.4 L

1 mole of CO₂ has a volume of 22.4 L

2x moles of CO₂ has a volume of 2x × 22.4 L

They form salt + water.

and the rxn is known as neutralisation rxn

Answer:

When an acid and a base are placed together, they react to neutralize the acid and base properties, producing a salt. Acid-base reactions that do not occur in water usually also produce salts, but they may also produce complex ions.

Helpful Link:

https://sciencing.com/happens-acid-base-combined-5132830.html

Answer:

The reactants for rust are iron ,water and oxygen while the products are hydrated iron oxide

Explanation:

4Fe+3O2+2H2O---->2Fe2O3.H2O

Answer:

Answer:

camphor sublimates salt is soluble in water while sand does not sublime and does not dissolve in water you first heat the mixture in a beaker covered with a watch glass camphor will then accumulate on the watch glass then you dissolve the remaining mixture of sand and salt salt will dissolve forming a salt solution then you filter using a filter paper and a beaker the residue on the filter paper is sand while the filtrate is salt solution you then heat the salt solution so that it can evaporate leaving salt particles thus you will have obtained salt sand and camphor

Answer:

The last one

Explanation:

Charges are balanced in a redox reaction

Answer:

B

Explanation:

During the first half of the reaction there was an increase in the rate of reaction due to the high concentration of the reactants. But as the reaction continues we witness a decrease in the amount of reactants which lowers the rate.

Answer:

B.  The concentration of reactants decreased while the concentration of product increased.

Explanation:

took the test :)

Answer:

to collect pure hydrogen and avoid mixing with air

Answer:

2 Na atoms

Explanation:

Answer:

[tex]\boxed {\boxed {\sf 8.0 \ M \ NaCl}}[/tex]

Explanation:

Molarity is a measure of concentration in moles per liter, therefore the formula is:

[tex]molarity= \frac{moles \ of \ solute}{lites \ of \ solution}[/tex]

There are 2.0 moles of solute or sodium chloride dissolved in 0.25 liters of water or solution.

Substitute these values into the formula.

[tex]molarity= \frac{ 2.0 \ mol \ NaCl}{0.25 \ L}[/tex]

Divide.

[tex]molarity=8 \ mol \ NaCl / L[/tex]

Molarity is measured in molars or M. 1 molar is equal to 1 mole per liter, so our answer is equal to 8 molars.

[tex]molarity= 8 \ M \ NaCl[/tex]

The original measurements of moles and liters have 2 significant figures, so our answer must have the same. For the number we calculated, that is the tenths place. There are no numbers to round, so we add a 0 in the tenths place.

[tex]molarity= 8.0 \ M \ NaCl[/tex]

The molarity of the solution is 8.0 M NaCl.

D. the pupil or the dark portion at the center of the eye

Answer:

A ball is thrown straight up from a rooftop 320 feet high. The formula below describes the ball's height above the ground, h, in feet, t seconds after it was thrown. The ball misses the rooftop on its way down and eventually strikes the ground. How long will it take for the ball to hit the ground? Use this information to provide tick marks with appropriate numbers along the horizontal axis in the figure shown.

h=-16t^2+16t+320

Temperature is measured in Kelvin..

Answer:

Below!

Explanation:

Isotopes are elements with a similar chemical makeup and the same atomic number, but a different atomic mass and number of neutrons . An example of this would be carbon-12, carbon-13, and carbon-14. Three isotopes of the element carbon that have the same 6 protons but have a different neutron count. A simple way to explain isotopes would be to say that they are just different "versions" of an element.

Hope this helps ya! Best of luck <3

[tex]\sf\bold{❍ Given:-}[/tex]

NaOH is dissolved in certain kilograms of solvent and molality of solution 0.5m.

Again , same among of NaOH is dissolved in 100 grams of solvent than initial , then molality becomes 0.625m.

$\space$

Now lets find the amount of NaOH and the initial mass of solvent.

Let,

$\space$

$\sf\bold{ ❍ We\:know,}$

$\sf{Molality(m)=}$ $\sf\dfrac{No.of\:moles\:of\:solute}{No.of\:solvent\:in\:kg}$

$\space$

$\sf\bold{Putting\:the\:formula:-}$

$\space$

$\sf\huge\underline\bold{ ❍Case:1}$

$\space$

$\longmapsto$ $\sf\small{0.5}$ $\sf\dfrac{x}{y}$

$\space$

$\longmapsto$ $\sf{0.5y = x }$

$\space$

$\longmapsto$ $\sf{multiply\:by\:2→ y = 2x}$

$\space$

$\sf\huge\underline\bold{ ❍Case:2}$

$\space$

$\longmapsto$ $\sf\small{0.625}$ $\sf\small\dfrac{x}{y}$ = $\sf\dfrac{x}{y=100g}$

$\space$

$\longmapsto$ $\sf\small{0.625}$ $\sf\dfrac{x}{y-100/1000kg}$ = $\sf\dfrac{x}{y-0.1kg}$

$\space$

$\longmapsto$ $\sf{0.625(y-0.1kg)=x}$

$\space$

$\longmapsto$ $\sf{0.625y-0.0625=x}$

$\space$

$\sf\small\bold{By\:putting\:the\:value\:of \:"x" we\: get:}$

$\space$

$\longmapsto$ $\sf{0.625(2x)-0.0625 = x}$

$\space$

$\longmapsto$ $\sf{1.25x 0.0625 = x}$

$\space$

$\longmapsto$ $\sf{1.25x - x = 0.0625}$

$\space$

$\longmapsto$ $\sf{0.25x = = 0.0625}$

$\space$

$\longmapsto$ $\sf\small{x=}$ $\sf\dfrac{0.0625}{0.25}$= $\sf\bold{x=0.25}$

$\space$

$\sf{So,y=2(x)=2\times0.25=}$ $\sf\bold{y=0.5}$

$\space$

$\sf\small{Initial\:mass\:of\:solvent:0.5kg=500g}$

$\space$

$\sf{Now,}$

Amount of NaOH=

$\space$ $\space$ $\space$ $\space$ $\space$ $\sf{=x\times molar\:mass}$

$\space$ $\space$ $\space$ $\space$ $\space$ $\sf{=0.25\times 40=10}$

$\space$

$\sf\underline{\underline{ ⚘ Hence,amount\:of\:NaOH=10kg}}$

_______________________________

Answer:

yes they were made to carry thousands of lb high up

Answer:

C. 0.5 cal/g°C

Explanation:

Using the following equation:

Q = m × c × ∆T

Where;

Q = amount of heat absorbed/released (calories)

m = mass of substance (g)

c = specific heat capacity (calg/°C)

∆T = change of temperature (°C)

According to the information provided in this question;

m = 10g

c = ?

∆T = 20°C

Q = 100cal

Using Q = m × c × ∆T

c = Q ÷ (m × ∆T)

c = 100 ÷ (10 × 20)

c = 100 ÷ 200

c = 0.5 cal/g°C

Answer:

Explanation: since oxalic acid is a weak acid it wont provide a strong acidic medium. So in order to provide a strong acidic medium dilute sulphuric acid is added.