Answer:
Work Done = 67.5 J
Explanation:
First we find the value of spring constant (k) using Hooke's Law. Hooke's is formulated as:
F = kx
where,
F = Force Applied = 450 N
k = Spring Constant = ?
x = Stretched Length = 30 cm = 0.3 m
Therefore,
450 N = k(0.3 m)
k = 450 N/0.3 m
k = 1500 N/m
Now, the formula for the work done in stretching the spring is given as:
W = (1/2)kx²
Where,
W = Work done = ?
k = 1500 N/m
x = 70 cm - 40 cm = 0.3 m
Therefore,
W = (1/2)(1500 N/m)(0.3 m)²
W = 67.5 J
A 4 kW vacuum cleaner is powered by an electric motor whose efficiency is 90%. (Note that the electric motor delivers 4 W of net mechanical power to the fan of the cleaner). What is rate at which this vacuum cleaner supplies energy to the room when running
Answer:[tex]3.6\ kW[/tex]
Explanation:
Given
Power Supplied [tex][tex]P_{input}=4\ kW[/tex][/tex]
Efficiency of the motor [tex]\neta =90\%[/tex]
and [tex]\neta =\dfrac{\text{Power output}}{\text{Power input}}[/tex]
[tex]\Rightarrow 0.9=\dfrac{P_{out}}{4}[/tex]
[tex]\Rightarrow P=0.9\times 4[/tex]
[tex]\Rightarrow P=3.6\ kW[/tex]
So, vacuum cleaner delivers a power of [tex]3.6\ kW[/tex]
Learning Goal: To understand the cause of constructive and destructive interference for the double-slit experiment, and to explain how the interference pattern depends on the parameters of the emitted waves. For this tutorial, use the PhET simulation Wave Interference. This simulation allows you to send waves through a variety of barriers and look at the resulting interference patterns.
Answer:
a) it is essential that the waves lurk coherently
b)the light passes through the slits, the relative phase between the two rays is due to the optical path difference of each one,
Explanation:
In double slit interference experiments it is essential that the waves lurk coherently, that is, that the relative phase of the waves that reaches each slit is maintained over time, this is achieved when point sources are used by passing light through a initial slit and if a laser is used it is already consistent at the output.
When the light passes through the slits, the relative phase between the two rays is due to the optical path difference of each one, when this path difference is equal to a whole number of donut lengths, it has constructive interference and if it is a number sowing we have destructive interference.
d sin θ = m λ constructive
d sin θ = (m + ½) λ destructive
where d is the distance between the two slits, lam is the wavelength and m is an integer called the interference order
An 80-kg quarterback jumps straight up in the air right before throwing a 0.43-kg football horizontally at 15 m/s . How fast will he be moving backward just after releasing the ball?PLEASE SORT QUESTION BELOWSort the following quantities as known or unknown. Take the horizontal direction to be along the x axis.mQ: the mass of the quarterbackmB: the mass of the football(vQx)i: the horizontal velocity of quarterback before throwing the ball(vBx)i: the horizontal velocity of football before being thrown(vQx)f: the horizontal velocity of quarterback after throwing the ball(vBx)f: the horizontal velocity of football after being thrown
Answer:
a
The speed of the quarterback backward is [tex]v_q = 0.08 \ m/s[/tex]
b
Known are
[tex]m_Q , m_B , (v_{Bx})_i (v_{Qx})_f, (v_{Bx})_f[/tex]
Unknown
[tex](v_{Qx})_f[/tex]
Explanation:
From the question we are told that
The mass of the quarterback is [tex]m_Q = 80 \ kg[/tex]
The mass of the ball is [tex]m_B = 0.43 \ kg[/tex]
The speed of the ball is [tex]v_{B x}= 15 \ m/s[/tex]
The law of momentum conservation can be mathematically represented as
[tex]m_Q u_{Qx} + m_Bu_{Bx} = - m_{Q} v_{Qx} + m_B v_{Bx}[/tex]
Now at initial both ball and quarterback are at rest and the negative sign signify that the quarterback moved backwards after throwing the ball
So
[tex]m_Q v_{Qx} = m_B v_ {Bx}[/tex]
=> [tex]v_{Qx} = \frac{m_Bv_{Bx}}{m_Q}[/tex]
substituting values
[tex]v_q = \frac{0.43 * 15}{80}[/tex]
[tex]v_q = 0.08 \ m/s[/tex]
What is the acceleration of an object that takes 20 sec to change from a speed of 200 m/s to 300 m/s ?
Given:
initial velocity, u = 200 m/sFinal velocity, v = 300 m/s Time taken, t = 20 secTo be calculated:
Calculate the acceleration of given object ?
Formula used:
Acceleration = v - u / t
Solution:
We know that,
Acceleration = v - u / t
☆ Substituting the values in the above formula,we get
Acceleration ⇒ 300 - 200 / 20
⇒ 100/20
⇒ 5 m/s²
How much work is done (by a battery, generator, or some other source of potential difference) in moving Avogadro's number of electrons from an initial point where the electric potential is 6.70 V to a point where the electric potential is -8.90 V? (The potential in each case is measured relative to a common reference point.)
Answer:
W = 1.5 x 10⁶ J = 1.5 MJ
Explanation:
First, we calculate the potential difference between the given 2 points. So, we have:
V₁ = Electric Potential at Initial Position = 6.7 V
V₂ = Electric Potential at Final Position = - 8.9 V
Therefore,
ΔV = Potential Difference = V₂ - V₁ = -8.9 V - 6.7 V = - 15.6 V
Since, we use magnitude in calculation only. Therefore,
ΔV = 15.6 V
Now, we calculate total charge:
Total Charge = q = (No. of Electrons)(Charge on 1 Electron)
where,
No. of Electrons = Avagadro's No. = 6.022 x 10²³
Charge on 1 electron = 1.6 x 10⁻¹⁹ C
Therefore,
q = (6.022 x 10²³)(1.6 x 10⁻¹⁹ C)
q = 96352 C
Now, from the definition of potential difference, we know that it is equal to the worked done on a unit charge moving it between the two points of different potentials:
ΔV = W/q
W = (ΔV )(q)
where,
W = work done = ?
W = (15.6 V)(96352 C)
W = 1.5 x 10⁶ J = 1.5 MJ
Um corpo de massa m= 2,0Kg é lançado horizontalmente, de uma altura h= 125m, com velocidade de módulo Vo =10m/s, como mostra a figura. Desprezando a resistência do ar e adotando g= 10m/s2 , determine: a) A energia mecânica total do corpo; b) A energia cinética do corpo a meia altura em relação ao solo; c) O tempo gasto até que o corpo atinja o solo; d) O alcance do movimento.
Answer:
A) E = 2550 J
B) K = 1325 J
C) t = 5,05 s
Explanation:
A) The total mechanical energy is given by the sum of the gravitational potential energy and the kinetic energy of the body:
[tex]E=U+K=mgh+\frac{1}{2}mv^2[/tex] (1)
m: mass of the body = 2,0 kg
g: gravitational acceleration = 9,8 m/s^2
h: height = 125 m
v: initial velocity of the body = 10 m/s
You replace the values of all variables h, m, g and v in the equation (1):
[tex]E=(2,0kg)(9,8m/s^2)(125m)+\frac{1}{2}(2,0kg)(10m/s)^2=2550\ J[/tex]
the total mechanical energy is 2550 J
B) The kinetic energy of the corp, when it is at a height of h/2 is given by:
[tex]K=\frac{1}{2}mv^2[/tex]
where
[tex]v=\sqrt{(v_x)^2+(v_y)^2}[/tex]
The x component of the velocity is constant in the complete trajectory, which is the initial velocity, that is, vo = vx
The y component is given by:
[tex]v_y^2=v_{oy}^2+2gy[/tex]
voy: vertical initial velocity = 0m/s
y: height = h/2 = 125/2 = 62.5 m
[tex]v_y=\sqrt{2g\frac{h}{2}}=\sqrt{2(9.8m/s^2)(62.5m)}=35m/s[/tex]
Then, you can calculate the velocity of the body and next, you can calculate the kinetic energy:
[tex]v=\sqrt{(10m/s)^2+(35m/s)^2}=36,40\frac{m}{s}\\\\K=\frac{1}{2}(2,0kg)(36,40m/s)^2=1325\ J[/tex]
C) The time that body takes in all its trajectory is:
[tex]t=\sqrt{\frac{2h}{g}}=\sqrt{\frac{2(125m)}{9,8m/s^2}}=5,05s[/tex]
The amplitudes and phase differences for four pairs of waves of equal wavelengths are (a) 2 mm, 6 mm, and π rad; (b) 3 mm, 5 mm, and π rad; (c) 7 mm, 9 mm, and π rad; (d) 2 mm, 2 mm, and 0 rad. Each pair travels in the same direction along the same string. Without written calculation, rank the four pairs according to the amplitude of their resultant wave, greatest first. (Hint: Construct phasor diagrams.)
Answer:
a = d > b = c
Explanation:
The information about amplitudes and phase differences for four pairs of waves of equal wavelengths are given below:
(a) 2 mm, 6 mm, and π rad
(b) 3 mm, 5 mm, and π rad
(c) 7 mm, 9 mm, and π rad
(d) 2 mm, 2 mm, and 0 rad
Whenever a wave has zero phase difference, its amplitude of the resultant wave will be twice the amplitude of any of the two waves. Nevertheless, let assume that the amplitude is a vector having angle Ø between them. The resultant vector will help us rank the four pairs according to the amplitude of their resultant wave by using phasor diagrams.
a.) 6 - 2 = 4mm
b.) 5 - 3 = 2mm
c.) 9 - 7 = 2mm
d.) 2 + 2 = 4mm
Therefore,
a = d and b = c
a = d > b = c
Please find the attached file for the phasor diagrams
A constant-velocity horizontal water jet from a stationary nozzle impinges normally on a vertical flat plate that rides on a nearly frictionless track. As the water jet hits the plate, it begins to move due to the water force. As a result, the acceleration will _____.
Answer:
a = ½ ρ A/M v₁²
Explanation:
This is a problem of fluid mechanics, where the jet of water at constant speed collides with a paddle, in this collision the water remains at rest, we write the Bernoulli equation, we will use index 1 for the jet before the collision the index c2 for after the crash
P₁ + ½ ρ v₁² + ρ g h₁ = P₂ + ½ ρ v₂² + ρ g h₂
in this case the water remains at rest after the shock, so v₂ = 0, as well as it goes horizontally h₁ = h₂
P₁-P₂ = ½ ρ v₁²
ΔP = ½ ρ v₁²
let's use the definition of pressure as a force on the area
F / A = ½ ρ v₁²
F = 1/2 ρ A v₁²
the density is
ρ = m / V
the volume is
V = A l
F = ½ m / l v₁²
knowing the force we can focus on the acceleration of the mass palette M
F = M a
a = F / M
a = ½ m/M 1/l v₁²
as well it can be given depending on the density of the water
a = ½ ρ A/M v₁²
Beats are the result of
Answer:
The phenomenon of beats is the result of sound interference and sound diffraction in periodic vibrations. In periodic vibration, the beats of sounds produced by the interference and diffraction of the waves of different frequencies.
Explanation:
Beats. When two sound waves of different frequency approach your ear, the alternating constructive and destructive interference causes the sound to be alternatively soft and loud - a phenomenon which is called "beating" or producing beats.
A heater rod (10 mm diameter, 100 mm length) of emissivity 0.75 is enclosed within a hollow cylindrical vacuum chamber (50 mm diameter, 100 mm length) of emissivity 0.25. The entire setup is insulated at the top and bottom ends by a low emissivity material, preventing any conductive heat dissipation from the ends. The heater rod is known to have a surface temperature of 1000 K, while the vacuum chamber is at a surface temperature of 300 K. How much heat is dissipated from the heater rod to the vacuum chamber (W)
Answer:
Explanation:
Given that:
Heater temperature ,T₁ = 1000K
Vaccum Chamber ,T₂ = 300K
emissivity of heater E₁ = 0.75
emissivity vaccum E₂ = 0.25
Heater diameter d₁ = 10 * 10⁻³mm
vaccum chamber d₂ = 50 * 10⁻³mm
When there is vaccum, then no air resistance will be there,
F₁₂ = 1
F₁₁ = 0
[tex]R_1= \frac{1-E_1}{E_1A_1} \\\\=\frac{1-0.75}{0.75*\pi * 10^-^2*L}[/tex]
[tex]R_2=\frac{1}{F_1_2 * A_1} \\\\=\frac{1}{1* \pi *10^-^2*L}[/tex]
[tex]R_3=\frac{1-0.25}{F_1_2 * A_1} \\\\=\frac{1}{0.25* \pi *5*10^-^2*L}[/tex]
Heat leaving from heater surface 1 to vaccum
[tex]Q_1_2 = \frac{L \pi \sigma (T_1^4- T_2^4)}{R_1+R_2+R_3}[/tex]
[tex]Q_1_2 = \frac{1000*10^-^3*\pi * 5.67*10^-^8(1000^4-300^4)}{\frac{0.25}{0.75*10^-2}+\frac{1}{10^-2} +\frac{0.75}{0.25*10^-^2*5} }[/tex]
[tex]Q_1_2 = \frac{1000*10^-^3*\pi * 5.67*10^-^8(1000^4-300^4)} {0.3333+1+0.6}\\\\Q_1_2= 91.39 \text {watt}[/tex]
A peak with a retention time of 407 s has a width at half-height (w1/2) of 7.6 s. A neighboring peak is eluted 17 s later with a w1/2 of 9.4 s. A compound that is known not to be retained was eluted in 2.5 s. The peaks are not baseline resolved. How many theoretical plates would be needed to achieve a resolution of 1.5?
Answer:
2.46 x 104
Explanation:
Solution
Recall that:
The retention time of a peak = 407 s
with a width at half-height of = 7.6 s
A compound is retained in 2.5 s.
resolution to be achieved = 1.5
Thus,
The number of plates (theoretical)= 16(tr2 / w2)
The R Resolution R= 0.589 Δtr / w1/2av = 0.589(17s) / 1/2(7.6s + 9.4s) = 1.18
Supposed that applied column contains 10,000 theoretical plates and the resolution of two peaks is 1.18
So if the column is replaced to obtain 1.5 resolution, the number of theoretical plates is needed is stated below;
width at the base = 9.4 - 7.6 = 1.8; tr = 0.786
N = 5.55tr2 / w21/2 = 5.55 (0.7862/ 1.182) x 104
= 2.46 x 104
Therefore, required theoretical plates to achieve a resolution of 1.5 is 2.46 x 104
What is most often given a value of zero to describe an object's position on a straight line?
O displacement
O reference point
O distance
O ending location
Answer:
O reference point
Explanation:
A reference point is often given the value of zero to describe an object position on a straight line, or when it didn't move. If the object doesn't move, that means that there is no displacement, and it is a reference point. The answer to the question is reference point.
A positive test charge of 5.0 x 10^-4 C is in an electric field that exerts a force of 2.5 x 10^-4 N on it. What is the magnitude of the electric field at the location of the test charge?
Answer:
E = 0.5N/C
Explanation:
In order to calculate the magnitude of the electric field you use the following formula:
[tex]E=\frac{F}{q}[/tex]
q: charge = 5.0*10^-4 C
F: force on the charge = 2.5*10^-4N
You replace the values of q and F in the equation for E:
[tex]E=\frac{2.5*10^{-4}N}{5.0*10^{-4}C}=0.5\frac{N}{C}[/tex]
hence, the magnitude of the electric field at the position of the carge is 0.5N/C
At the location of the test charge, the magnitude will be:
"0.5 N/C".
Electric fieldWhenever charge seems to be available inside any form, an electric property has been linked among each spatial position. This same size and direction are represented either by the quantity of E.
According to the question,
Charge, q = 5.0 × 10⁻⁴ C
Force on the charge, F = 2.5 × 10⁻⁴ N
We know the relation of the magnitude of electric field be
→ E = [tex]\frac{F}{q}[/tex]
By substituting the values, we get
= [tex]\frac{2.5\times 10^{-4}}{5.0\times 10^{-4}}[/tex]
= 0.5 N/C
Thus the approach above is correct.
Find out more information about electric field here:
https://brainly.com/question/14372859
The displacement of the air molecules in a sound wave is modeled with the wave function s(x, t) = 3.00 nm cos(50.00 m−1x − 1.71 ✕ 104 s−1t). (a) What is the wave speed (in m/s) of the sound wave? 342 Correct: Your answer is correct. m/s (b) What is the maximum speed (in m/s) of the air molecules as they oscillate in simple harmonic motion? m/s (c) What is the magnitude of the maximum acceleration (in m/s2) of the air molecules as they oscillate in simple harmonic motion?
Answer:
a) 342 m/s
b) 51*10^-6 m/s
c) 0.87m/s^2
Explanation:
The following function describes the displacement of the molecules in a sound wave:
[tex]s(x,t)=3.00nm\ cos(50.00\ m^{-1}x-1.71*10^4s^{-1}t)[/tex] (1)
The general form of a function that describes the same situation is:
[tex]s(x,t)=Acos(kx-\omega t)[/tex] (2)
By comparing equations (1) and (2) you have:
k: wave number = 50.00 m^-1
w: angular frequency = 1.71*10^4 s^-1
A: amplitude of the oscillation = 3.00nm
a) The speed of the sound is obtained by using the formula:
[tex]v=\frac{\omega}{k}=\frac{1.71*10^4s^-1}{50.00m^{-1}}=342\frac{m}{s}[/tex]
b) The maximum speed of the molecules is the maximum value of the derivative of s(x,t), in time. Then, you first obtain the derivative:
[tex]\frac{ds}{st}=-\omega A sin(kx-\omega t)[/tex]
The max value is:
[tex]v_{max}=\omega A[/tex]
[tex]v_{max}=(1.71*10^4s^-1)(3.00nm)=51300\frac{nm}{s}=51\frac{\mu m}{s}[/tex] = 51*10^-6 m/s
c) The acceleration is the max value of the derivative of the speed, that is, the second derivative of the displacement s(x,t):
[tex]a=\frac{dv}{dt}=\frac{d^2s}{dt^2}=-\omega^2A cos(kx-\omega t)\\\\a_{max}=\omega^2 A[/tex]
Then, the maximum acceleration is:
[tex]a_{max}=(1.71*10^4s^{-1})^2(3.00nm)=0.87\frac{m}{s^2}[/tex]
A carousel has a radius of 1.70 m and a moment of inertia of 110 kg · m2. A girl of mass 44.0 kg is standing at the edge of the carousel, which is rotating with an angular speed of 3.40 rad/s. Now the girl walks toward the center of the carousel and stops at a certain distance from the center d. The angular speed of the carousel is now 5.4 rad/s. How far from the center, in meters, did the girl stop?
Answer:
Explanation:
Initial moment of inertia of the carousel + girl
I₁ = 110 + 44 x 1.7²
= 110 + 127.16
= 237.16 kgm².
final moment of inertia of carousel + girl
I₂ = 110 + 44 x d²
applying law of conservation of angular momentum
I₁ ω₁ = I₂ω₂
ω₁ and ω₂ are angular velocities of the carousel before and after .
237.16 x 3.4 = (110 + 44 x d²)x 5.4
806.34 = 594 + 237.6 d²
237.6 d² = 212.34
d²= .8936
d = .9453 m
The manufacturer of a 9 [V] flashlight battery says that the battery will deliver 20 [mA] for 80 continuous hours. However, during that time the voltage will drop from 9 [V] to 6 [V]. Assume the voltage drop is linear in time, but that the current is constant. How much energy does the batteiy deliver in 80 [h]? Battery "capacity" can be stated in terms of the total charge the battery will deliver, with units of milliamp-hours [mA-h]. If the battery can be considered "dead" when the voltage reaches 6 V, what is the capacity of the flashlight battery in mA-h?
Answer:
a. Energy ≅ 43.2 kJ
b. Capacity of battery = 1600-mAh
Explanation:
average voltage value = (9 + 6)/2 = 15/2 = 7.5
current = 20 mA = 20 x [tex]10^{-3}[/tex]
time duration = 80 hrs = 80 x 60 x 60 = 288000 sec
If the current is assumed to be constant, then the energy delivered is the product of voltage across, current delivered and the time duration during which it is delivered.
Energy delivered by battery = 7.5 x 20 x [tex]10^{-3}[/tex] x 288000 = 43200 J
Energy ≅ 43.2 kJ
If the battery is considered dead when it reaches 6-v, then that means that at 6-v, there is no potential difference between them.
capacity of flashlight battery is the product of current delivered and the time duration of delivery.
capacity = 20-mA x 80-hr = 1600-mAh
Light bulb 1 operates with a filament temperature of 2800 K, whereas light bulb 2 has a filament temperature of 1700 K. Both filaments have the same emissivity, and both bulbs radiate the same power. Find the ratio A1/A2 of the filament areas of the bulbs. A1/A2
Answer:
A₁/A₂ = 0.136
Explanation:
The power radiated by a filament bulb is given by the following formula:
E = σεAT⁴
where,
E = Emissive Power
σ = Stephen Boltzman Constant
ε = emissivity
A = Area
T = Absolute Temperature
Therefore, for bulb 1:
E₁ = σε₁A₁T₁⁴
And for bulb 2:
E₂ = σε₂A₂T₂⁴
Dividing both the equations:
E₁/E₂ = σε₁A₁T₁⁴/σε₂A₂T₂⁴
According to given condition, the emissive power and the emissivity is same for both the bulbs. Therefore,
E/E = σεA₁T₁⁴/σεA₂T₂⁴
1 = A₁T₁⁴/A₂T₂⁴
A₁/A₂ = (T₂/T₁)⁴
where,
T₁ = 2800 K
T₂ = 1700 K
Therefore,
A₁/A₂ = (1700 K/2800 K)⁴
A₁/A₂ = 0.136
Imagine an isolated positive point charge Q (many times larger than the charge on a single proton). There is a charged particle A (whose charge is much smaller than charge Q) at a distance from the point charge Q. On which of the following quantities does the magnitude of the electric force on this charged particle A depend:_____.
1. the size and shape of the point charge Q
2. the specific location of the point charge Q (while the distance between Q and A is fixed)
3. the mass of the charged particle A
4. the size and shape of the charged particle A
5. the distance between the point charge Q and the charged particle A
6. the type of charge on the charged particle A
7. the mass of the point charge Q
8. the amount of the charge on the point charge Q
9. the magnitude of charge on the charged particle A
10. the specific location of the charged particle A (while the distance between Q and A is fixed)
11. the relative orientation between Q and A (while the distance between Q and A is fixed)
Answer:
Explanation:
The magnitude of the electric force on this charged particle A depends upon the following
5. the distance between the point charge Q and the charged particle A
8. the amount of the charge on the point charge Q
9. the magnitude of charge on the charged particle A
A group of college students eager to get to Florida on a spring break drove the 710-mi trip with only minimum stops. They computed their average speed for the trip to be 55.7 mi/h.How many hours did the trip take?
Answer:
Time taken for trip = 12.74 hour (Approx)
Explanation:
Given:
Distance of trip = 710-mi
Average speed for the trip = 55.7 mi/h
Find:
Time taken for trip = ?
Computation:
⇒ Time = Distance / Speed
⇒ Time taken for trip = Distance of trip / Average speed for the trip
⇒ Time taken for trip = 710-mi / 55.7 mi/h
⇒ Time taken for trip = 12.74 hour (Approx)
What is the effect on the period of a pendulum if you decrease its length by 6.35%? (Answer this question in terms of the initial period T.) T' = 0.87703 Incorrect: Your answer is incorrect. T
Answer:
T' = 0.9677T
Explanation:
The period of a pendulum is given by the following formula:
[tex]T=2\pi \sqrt{\frac{l}{g}}[/tex]
l: length of the pendulum
g: gravitational acceleration
If the length of the pendulum is decreased in 6.35% the length of the pendulum becomes:
[tex]l'=l-0.0635l=0.9365l[/tex]
The new period for a length of l' is:
[tex]T'=2\pi \sqrt{\frac{l'}{g}}=2\pi \sqrt{\frac{0.9365l}{g}}=\sqrt{0.9365}(2\pi \sqrt{\frac{l}{g}})=0.9677(2\pi \sqrt{\frac{l}{g}})\\\\T'=0.9677T[/tex]
hence, the new period is 0.9677T
Do wave properties affect wave speed
Answer:
Nope!
Explanation:
The amplitude of a wave does not affect the speed at which the wave travels. Both Wave A and Wave B travel at the same speed. The speed of a wave is only altered by alterations in the properties of the medium through which it travels.
HOPE IT HELPS :)
PLEASE MARK IT THE BRAINLIEST!
Which of the following are true?
a) the total momentum of an isolated system is constant.
b) the total momentum of any number of particles is equal to the algebraic sum of the momenta of individual particles.
c) the total momentum of any number of particles is equal to the vector sum of the momenta of individual particles.
d) the vector sum of forces acting on a particle equals the rate of change of momentum of the particle with respect to time.
e) the total momentum of any system is constant.
f) the vector sum of forces acting on a particle equals the rate of change of velocity of the particle with respect to time.
Suppose multiple stations are connected in wired network where CSMA/CD implemented. Among them, station A wants to communicate with B and station C wants to communicate with D. Previously, both of these sender stations have faced collisions at different timings and are still unsuccessful in their transmission. The value of k for station A has reached to 6, whereas the value of k for station B has reached to 4. The maximum attempts allowed to any station is set to 10 and transmission time for a frame is 0.5ms.
This time, Both of the sender stations (A & C) sensed the medium, both got the channel idle and started transmission. Sooner, the station A detected the collision.
i.What will happen now?
ii.How long station A has wait before re-trying
iii.Meanwhile what will happen at station C
Answer:
bro i think ur from the uni of arid agriculture rawalpindi and today is your networking paper
Explanation:
1.How do we define electric potential at any point in space ?
2.How does the electric potential change along the direction of the net electric field?Explain them in details.
Answer:
1. The electric potential at any point in space, is the work done in moving a unit charge from infinity to that point.
2.The electric potential varies radially by decreasing as the distance from the electric field increases.
Explanation:
1. The electric potential at any point in space, is the work done in moving a unit charge from infinity to that point. It is defined mathematically as, V = W/q where V = electric potential, W = work done in moving charge q into electric field and q = charge. For the work done of moving a charge q into an electric field of charge q' at a distance r between them, W = kqq'/r and work done per unit charge in moving q in electric field is V = W/q = kqq'/r ÷q = kq'/r, Also, for an electric field, E, V = ∫E.dr where r is the direction moved by the charge in the electric field.
2. Since the electric potential V = kq'/r, V ∝ 1/r since k and q' are constant. So, the electric potential varies radially by decreasing as the distance from the electric field increases.
How does the centripetal force depend on speed, radius and the revolving mass?
Answer:
Mass velocity and radius are all related to centripetal force
Explanation:
By frequency of its rotation and the radius of the circular path along which objects moves
An ideal gas in a balloon is kept in thermal equilibrium with its constant-temperature surroundings. How much work is done if the outside pressure is slowly reduced, allowing the balloon to expand to 50 times its original size
Answer:
w = 252.32 N
Explanation:
given data
balloon expand = 50 times its original size
we consider here initially pressure and volume
pressure = 645 pa
volume = 0.10 m³
solution
as in isothermala process ideal gas
PV = mRT
P = [tex]\frac{mRT}{v}[/tex]
P = [tex]\frac{c}{v}[/tex]
here c is constant
so work done is express as
[tex]w = c \int\limits^{V2}_{V1} {\frac{dv}{v}}[/tex]
w = [tex]c \times ln( \frac{v2}{v1})[/tex]
and we know c = p1 × v1
so
w = p1 × v1 × [tex]ln (\frac{50v1}{v1} )[/tex]
w = 645 × 0.1 × ln(50)
w = 252.32 N
Need help on this question I’d really appreciate it thanks!
Answer:radiation
Explanation:
radiation is the only one that makes sense
A 15 g toy car moving to the right at 24 cm/s has a head-on nearly elastic collision with a 21 g toy car moving in the opposite direction at 31 cm/s. After colliding, the 15 g car moves with a velocity of 41 cm/s to the left. Find the speed of the second car after the collision.
Answer:
The speed of the second toy car after collision is [tex]v_2 = 0.155 \ m/s[/tex]
Explanation:
Let movement to the right be positive and the opposite negative
From the question we are told that
The mass of the car is [tex]m_1 = 15 \ g = \frac{15}{1000} = 0.015 \ kg[/tex]
The initial velocity of the car is [tex]u_1 = 24 \ cm /s = 0.24 m/s[/tex]
The mass of the second toy car [tex]m_2 = 21 g = 0.021 \ kg[/tex]
The initial velocity of the car is [tex]u_2 = 31 \ cm/s =- 0.31 m/s[/tex]
The final velocity of the first car is [tex]v = 41cm/s = - 0.41 m/s[/tex]
From law of momentum conservation we have that
[tex]m_1 u_1 + m_2 u_2 = m_1 v_1 + m_2 v_2[/tex]
substituting values
[tex](0.015* 0.24) +( 0.021 * -0.31) = (0.015 * -0.41 ) + 0.021 v_2[/tex]
[tex]-0.00291 = -0.0615 + 0.021 v_2[/tex]
[tex]v_2 = 0.155 \ m/s[/tex]
What does it mean that an exoplanet exists in the "habitable zone"? Question 6 options: (a) It is located the same distance from its star that Earth is from the Sun. (b) It is located the right distance from its star to enable liquid water to exist on its surface. (c) It means that the exoplanet has an oxygen rich atmosphere. (d) It is located a distance from its star that makes extinction level asteroid impacts unlikely.
Answer:
(b) It is located the right distance from its star to enable liquid water to exist on its surface.
Explanation:
The habitable zone according to astronomy and astrobiology is a region around a star that the planets around the star can hold and support liquid water. For our solar system, the habitable zone coincides approximately with the distance from the sun to Earth.
Which of these is not a factor that influences animal growth? *
2 points
A. inherited diseases
B. gravitational force
C. genetic information
D. availability of food
