The acceleration of each block is zero since they are at rest, and the tension in the cable is given by the weight component along the incline, which is 230 lb * sin(θ) or 410 lb * sin(θ), depending on the block.
To find the acceleration of each block and the tension in the cable, we can analyze the forces acting on each block separately.
For Block A:
The weight of Block A is 230 lb, and it acts vertically downward. Resolving this weight into its components, we have:
Weight of Block A along the incline = 230 lb * sin(θ)
Weight of Block A perpendicular to the incline = 230 lb * cos(θ)
The net force acting on Block A is the difference between the weight component along the incline and the tension in the cable. Since the block is at rest, the net force is zero.
Therefore, the tension in the cable is equal to the weight component along the incline:
Tension in the cable = 230 lb * sin(θ)
For Block B:
The weight of Block B is 410 lb, and it acts vertically downward. Resolving this weight into its components, we have:
Weight of Block B along the incline = 410 lb * sin(θ)
Weight of Block B perpendicular to the incline = 410 lb * cos(θ)
The net force acting on Block B is the difference between the weight component along the incline and the tension in the cable. Since the block is at rest, the net force is zero.
Therefore, the tension in the cable is equal to the weight component along the incline:
Tension in the cable = 410 lb * sin(θ)
To find the acceleration of each block, we can use Newton's second law, F = ma, where F is the net force and a is the acceleration.
For Block A:
Net force = Weight component along the incline - Tension in the cable
Since the block is at rest, the net force is zero:
0 = 230 lb * sin(θ) - Tension in the cable
Tension in the cable = 230 lb * sin(θ)
For Block B:
Net force = Weight component along the incline - Tension in the cable
Since the block is at rest, the net force is zero:
0 = 410 lb * sin(θ) - Tension in the cable
Tension in the cable = 410 lb * sin(θ)
Therefore, the tension in the cable is the same for both blocks and is equal to 230 lb * sin(θ) or 410 lb * sin(θ), depending on which block we consider.
Learn more about forces here:
https://brainly.com/question/13191643
#SPJ11
What are the gain and beamwidth of a Deep Space Network (DSN)
70m antenna at 2.0 GHz, and at 8.0 GHz (use an efficiency of
.65)?
The gain and beamwidth of a Deep Space Network (DSN) 70m antenna at 2.0 GHz and 8.0 GHz are as follows:
Gain at 2.0 GHz = 150.46
Beamwidth at 2.0 GHz = 466.67 degrees
Gain at 8.0 GHz = 601.84
Beamwidth at 8.0 GHz = 1866.67 degrees.
Given,
Diameter (d) of the antenna = 70 m
Frequency (f) = 2.0 GHz and 8.0 GHz
Efficiency (η) = 0.65
The gain (G) of the antenna can be calculated using the following formula:
G = (πd²η/λ²)
Where, λ = c/f, where c is the speed of light in vacuum.
Substituting the given values, we get,
Gain at 2.0 GHz = (π × 70² × 0.65)/(3 × 10⁸/2 × 10⁹) = 150.46
Gain at 8.0 GHz = (π × 70² × 0.65)/(3 × 10⁸/8 × 10⁹) = 601.84
The beamwidth (B) of the antenna can be calculated using the following formula:
B = (70/λ)
Where λ is the wavelength of the frequency.λ
at 2.0 GHz = c/f = 3 × 10⁸/2 × 10⁹ = 0.15 mλ
at 8.0 GHz = c/f = 3 × 10⁸/8 × 10⁹ = 0.0375 m
Substituting the values, we get,
Beamwidth at 2.0 GHz = (70/0.15) = 466.67 degrees
Beamwidth at 8.0 GHz = (70/0.0375) = 1866.67 degrees
Learn more about Deep Space Network (DSN) from this link:
https://brainly.com/question/27516886
#SPJ11
A small mailbag is released from a helicopter that is descending steadily at \( 2.47 \mathrm{~m} / \mathrm{s} \). (a) After \( 3.00 \mathrm{~s} \), what is the speed of the mailbag? \[ v= \] (b) How
A small mailbag is released from a helicopter that is descending steadily at a velocity of 2.47 m/s. After 3.00 seconds, the speed of the mailbag is approximately 29.4 m/s.
To determine the speed of the mailbag after 3.00 s, we need to consider its initial speed and the downward acceleration due to gravity.
Given:
Initial speed of the helicopter, v₀ = 0 m/s (since the mailbag is released from rest)
Downward acceleration due to gravity, a = 9.8 m/s² (assuming no air resistance)
We can use the equation of motion to calculate the speed at a given time:
v = v₀ + a * t
Substituting the given values:
v = 0 + (9.8 m/s²) * (3.00 s)
v ≈ 29.4 m/s
Therefore, after 3.00 s, the speed of the mailbag is approximately 29.4 m/s.
Learn more about Downward acceleration here:
https://brainly.com/question/28232089
#SPJ11
An electrical component has 5 volts across it and draws 566 milliamps of current. What is the electronic component's power consumption (in watts)?
The electronic component's power consumption (in watts) is 2.83 watts.
Power is given by the equation:
Power = voltage x current
We are given that voltage across the electrical component is 5 volts, and the current through it is 566 milliamps or 0.566 amps.
Substituting these values in the equation above, we get:
Power = 5 x 0.566
Power = 2.83 watts
Therefore, the electronic component's power consumption is 2.83 watts.
Thus, we get the answer of 2.83 watts as the electronic component's power consumption (in watts).
To know more about power consumption, visit:
https://brainly.com/question/32435602
#SPJ11
24. If a vector has an \( x \)-component of \( +10 \mathrm{~N} \), and a \( y \)-component of \( +20 \mathrm{~N} \), then what is the magnitude and direction of the vector?
The vector has an x-component of +10N and a y-component of +20N. So the magnitude of the vector is given by:Magnitude=√x component2+ycomponent2Magnitude=√102+202Magnitude=√100+400Magnitude=√500Magnitude=22.4 NThe magnitude of the vector is 22.4 N.
The direction of the vector is given by the inverse tangent of the y-component over the x-component:
Direction=tan-1(y-component/x-component)Direction=tan-1(20/10)Direction=tan-1(2)Direction=63.4°So the magnitude of the vector is 22.4 N and the direction of the vector is 63.4°.
Vectors are used in physics to describe the magnitude and direction of quantities that have both magnitude and direction. A vector is a quantity with both magnitude and direction. It is represented by an arrow pointing in the direction of the vector with a length proportional to its magnitude.
In the given problem, the vector has an x-component of +10N and a y-component of +20N. So, the magnitude of the vector is calculated using the formula:
Magnitude=√x-component2+y-component2Magnitude=√102+202Magnitude=√100+400Magnitude=√500Magnitude=22.4 NThe magnitude of the vector is 22.4 N.The direction of the vector is given by the inverse tangent of the y-component over the x-component. The formula to calculate the direction of the vector is:
Direction=tan-1(y-component/x-component)Direction=tan-1(20/10)Direction=tan-1(2)Direction=63.4°Therefore, the magnitude of the vector is 22.4 N and the direction of the vector is 63.4°.
The magnitude of the given vector is 22.4 N, and the direction of the vector is 63.4°.
To know more about Magnitude:
brainly.com/question/31022175
#SPJ11
fusion reactions could not occur in a star without the pressure created by _____
Fusion reactions are reactions that occur when two or more atomic nuclei come close enough to form one or more different atomic nuclei and subatomic particles like protons and neutrons.
These reactions are important for a variety of reasons, including the energy they provide in the form of sunlight, the helium that forms during these reactions which is used in balloons, and the potential for fusion to provide a sustainable source of energy.
In stars, fusion reactions could not occur without the pressure created by the inward force of gravity. Fusion requires high temperatures and pressures to overcome the electromagnetic repulsion between positively charged atomic nuclei. In the core of a star, the high temperature and pressure created by gravity causes hydrogen nuclei (protons) to come together and form helium through a series of nuclear reactions known as the proton-proton chain.
This process releases a tremendous amount of energy in the form of light and heat, which provides the energy that stars need to shine and support life on planets like Earth.
Fusion reactions are incredibly important to our understanding of the universe and our ability to harness energy from sources that do not contribute to climate change.
While scientists have made great strides in developing fusion reactors that can produce energy on Earth, there is still much work to be done before we can fully realize the potential of this technology.
To know more about atomic visit:
https://brainly.com/question/1566330
#SPJ11
tourist being chased by an angry bear is running in a straight line toward his car at a speed of 5.19 m/5. The car is a distance d away. The bear is 27.2 m behind the tourist and running at 8.05 m/s. The tourist reaches the car safely. What is the maximum possible value for d ?
The maximum possible value for d is approximately 49.3 m.
To determine the maximum possible value for d, we need to consider the scenario where the bear is closest to the tourist when the tourist reaches the car.
Let's analyze the situation:
The tourist's speed = 5.19 m/s
The bear's speed = 8.05 m/s
The initial distance between the bear and the tourist = 27.2 m
For the bear to be closest to the tourist, it should take the shortest path towards the tourist's car. This means the bear will run in a straight line towards the car, while the tourist is also running in a straight line towards the car.
The time taken by the tourist to reach the car is given by:
time = distance / speed
The time taken by the bear to reach the car is given by:
time = (distance + 27.2 m) / 8.05 m/s
To find the maximum possible value for d, we need to find the distance at which both the times are equal. Therefore, we equate the two expressions for time:
distance / 5.19 m/s = (distance + 27.2 m) / 8.05 m/s
Simplifying the equation:
8.05 m/s * distance = 5.19 m/s * (distance + 27.2 m)
8.05 * distance = 5.19 * distance + 5.19 * 27.2
8.05 * distance - 5.19 * distance = 5.19 * 27.2
(8.05 - 5.19) * distance = 5.19 * 27.2
2.86 * distance = 5.19 * 27.2
distance = (5.19 * 27.2) / 2.86
Calculating the expression, we find:
distance ≈ 49.3 m
Therefore, the maximum possible value for d is approximately 49.3 m.
learn more about "speed ":- https://brainly.com/question/13943409
#SPJ11
Assume that any values without units are in the usual SI (kilogram-meter-
second based) units.
1. A beam of green light has frequency 5.5 × 1014Hz. Find:
(a) The wavelength in air.
(b) The wavelength, frequency, and speed in glass (refractive index n = 1.5).
(c) The energy and momentum of each photon in air. Do these change inside
the glass? If so find the new values.
(a) The wavelength of the green light in air is approximately 5.45 × 10^-7 m. (b) In glass, the wavelength is approximately 3.63 × 10^-7 m, the frequency remains 5.5 × 10^14 Hz, and the speed is approximately 2.00 × 10^8 m/s. (c) The energy of each photon of light is approximately 3.64 × 10^-19 J, and the momentum is approximately 1.21 × 10^-27 kg·m/s, both in air and in glass.
Given:
Frequency of green light in air (ν) = 5.5 × 10^14 Hz
Speed of light in vacuum (c) = 3.00 × 10^8 m/s
Refractive index of glass (n) = 1.5
Planck's constant (h) = 6.626 × 10^-34 J·s
(a) The formula to calculate the wavelength (λ) is:
λ = c / ν
λ = (3.00 × 10^8 m/s) / (5.5 × 10^14 Hz)
λ ≈ 5.45 × 10^-7 m
(b) Wavelength in glass:
Using the refractive index, we have:
λ = λ_air / n
λ = 5.45 × 10^-7 m / 1.5
λ ≈ 3.63 × 10^-7 m
Frequency in glass:
The frequency remains the same in different mediums.
ν = 5.5 × 10^14 Hz
Speed of light in glass:
Using the refractive index, we have:
v = c / n
v = (3.00 × 10^8 m/s) / 1.5
v = 2.00 × 10^8 m/s
(c) Energy of photon:
In air:
E = hν
E = (6.626 × 10^-34 J·s) × (5.5 × 10^14 Hz)
E ≈ 3.64 × 10^-19 J
In glass:
The energy of each photon remains the same regardless of the medium.
E ≈ 3.64 × 10^-19 J
Momentum of photon:
In air:
p = hν / c
p = (6.626 × 10^-34 J·s) × (5.5 × 10^14 Hz) / (3.00 × 10^8 m/s)
p ≈ 1.21 × 10^-27 kg·m/s
In glass:
The momentum of each photon remains the same regardless of the medium.
p ≈ 1.21 × 10^-27 kg·m/s
To know more about refractive index visit:
https://brainly.com/question/30761100
#SPJ11
A golfer putting on a green, requires three strokes to hole out. During the first put the ball rolls 5.0 m due east. For the second put, the ball travels 2.1 m at an angle of 20.0∘north of east. The third put is 0.50 m due north. What is the displacement (magnitude and direction relative to due east) that would have been needed to hole out on the first put? (6)
The displacement needed to hole out on the first putt is approximately 5.18 m east and 1.218 m north, with a magnitude of 5.18 m and a direction approximately 13.7° north of east.
To find the displacement needed to hole out on the first putt, we can calculate the vector sum of the three putts. Since the first putt is purely eastward, it contributes only to the eastward displacement. The second putt contributes to both the eastward and northward displacements, and the third putt contributes only to the northward displacement.
Let's break down the displacements:
First putt: 5.0 m due east (displacement in the +x direction)
Second putt: 2.1 m at an angle of 20.0° north of east (displacement with components in both the +x and +y directions)
Third putt: 0.50 m due north (displacement in the +y direction)
To find the total displacement, we add the displacements in the x and y directions separately.
Eastward displacement = 5.0 m
Northward displacement = 2.1 m * sin(20.0°) + 0.50 m
Calculating the values:
Eastward displacement = 5.0 m
Northward displacement = 0.718 m + 0.50 m = 1.218 m
Now we can find the magnitude and direction of the total displacement using the Pythagorean theorem and trigonometry:
Magnitude of displacement = √(Eastward displacement² + Northward displacement²)
Direction of displacement = arctan(Northward displacement / Eastward displacement)
Calculating the values:
Magnitude of displacement = √(5.0 m² + 1.218 m²) ≈ 5.18 m
Direction of displacement = arctan(1.218 m / 5.0 m) ≈ 13.7° north of east
Therefore, the magnitude of the displacement needed to hole out on the first putt is approximately 5.18 m, and the direction relative to due east is approximately 13.7° north of east.
To know more about displacement, refer to the link below:
https://brainly.com/question/14276533#
#SPJ11
Two spaceships pass each other traveling in opposite directions. A passenger on ship A, which she knows to be 100 m long, notes that ship B is moving with a speed of 0.92c relative to ship A and she measures the length of ship B to be 36 m. What are the lengths of both spaceships as measured by a passenger in ship B?
When two spaceships pass each other, a passenger on ship A observes ship B to be 36 m long. However, a passenger on ship B sees ship A as 67.64 m long.
The length of both spaceships as measured by a passenger in ship B can be calculated using the formula of length contraction. According to length contraction, the length of an object appears shorter in the direction of its motion when viewed by an observer in a different frame of reference. Let the length of spaceship A be [tex]L_A[/tex] and the length of spaceship B be[tex]L_B[/tex]. The velocity of spaceship B relative to spaceship A is 0.92c. So, the Lorentz factor (γ) can be calculated as [tex]\gamma = 1 / \sqrt(1 - (v/c)^2)[/tex], where c is the speed of light, and v is the relative velocity of spaceship B with respect to spaceship A. [tex]\gamma = 1 / \sqrt(1 - (0.92c/c)^2)= gamma = 1 / \sqrt(1 - 0.8464)=gamma = 1 / 0.5326=gamma = 1.8789[/tex]Length contraction can be calculated as: [tex]L_B = L_A / \gamma36 = L_A / 1.8789 L_A = 67.64 m[/tex]So, the length of spaceship A as measured by a passenger in ship B is 67.64 m, and the length of spaceship B as measured by a passenger in ship B is 36 m.For more questions on spaceships
https://brainly.com/question/31320632
#SPJ8
Show with the diagram a ball is dropped from rest from a height h above the ground at the instant the first ball is released. Determine the velocity of the second ball, if the two are to meet at a height h/2 above the ground.
Therefore, the velocity of the second ball when the two balls meet at a height h/2 above the ground is sqrt(hg/2). Consider the situation in which two balls are dropped from a height h above the ground. The first ball is released at time t = 0, and the second ball is released a few moments later. The objective is to find out the velocity of the second ball when the two balls meet at a height h/2 above the ground. For the purpose of this analysis, we can neglect air resistance and assume that the balls are perfectly spherical.Let's start with the first ball that was released at time t = 0. At the moment it is released, it has an initial velocity of zero because it is dropped from rest. Due to the force of gravity acting on it, the ball starts to accelerate downwards. The acceleration of the ball is constant and is equal to the acceleration due to gravity, g = 9.81 m/s^2.
The distance traveled by the first ball from the time it is released until it reaches the height h/2 can be calculated using the following equation:h/2 = (1/2)gt^2
Solving for t, we get:
t = sqrt(h/g)
Now, let's consider the second ball that was released after a time interval t. At the moment it is released, it has an initial velocity of zero because it is also dropped from rest. We can use the following kinematic equation to determine the velocity of the second ball when it reaches a height h/2:
h/2 = (1/2)gt^2 + vt
where v is the velocity of the second ball at time t.
Substituting the value of t from the first equation into the second equation, we get:
h/2 = (1/2)g(h/g) + v(sqrt(h/g))
Simplifying, we get:
h/2 = (1/2)sqrt(hg) + v(sqrt(h/g)) Solving for v, we get:
v = sqrt(hg) - sqrt(hg/2)
v = sqrt(hg/2)
Therefore, the velocity of the second ball when the two balls meet at a height h/2 above the ground is sqrt(hg/2).
To know more about acceleration about:-
https://brainly.com/question/2303856
#SPJ11
Consider a shipping crate that is sliding in a straight line down a loading ramp at constant speed. In this case a. the crate is not in equilibrium since it is moving. b. the net force acting on the crate is zero. c. This could not happen in real life, since in fact a crate must continually gain speed as it slides down d. gravity is the only force acting on the crate.
A shipping crate is sliding in a straight line down a loading ramp at constant speed. The correct answer is b. the net force acting on the crate is zero.
When the crate is sliding down the ramp at a constant speed, it means that the forces acting on the crate are balanced, resulting in a net force of zero. In this scenario, the force of gravity pulling the crate down the ramp is balanced by the frictional force acting in the opposite direction. The crate is in a state of dynamic equilibrium, where the applied force (friction) and the gravitational force cancel each other out, allowing the crate to maintain a constant speed.
Option A is incorrect because equilibrium can exist even when an object is moving, as long as the net force acting on it is zero. Option C is incorrect because it is possible for a crate to slide down a ramp at a constant speed due to the balance of forces. Option D is incorrect because the frictional force is also acting on the crate, in addition to gravity, to maintain a constant speed.
Learn more about net force here:
https://brainly.com/question/14361879
#SPJ11
Lucy Lightfoot stands with one foot on one bathroom scale and her other foot on a second bathroom scale. Each scale reads 380 N. What is Lucy's weight? Express your answer with the appropriate units.
Lucy's weight can be determined by adding the readings of the two bathroom scales together. Each scale reads 380 N, so when combined, the total reading will be 760N.
The weight of an object is the force exerted on it due to gravity. In this case, the force measured by each bathroom scale represents the normal force exerted by Lucy's weight.
Since the normal force and weight are equal in magnitude but opposite in direction, the total weight can be calculated by summing the readings of the scales. Adding the readings of the two scales:
Weight = 380 N + 380 N = 760 N
Therefore, Lucy's weight is 760 Newtons.
To learn more about weight, click here brainly.com/question/31056519
#SPJ11
A soccer player kicks the ball that travels a distance of 37.0 m on a level field. The ball leaves his foot at an initial peed of (v0 ) and an angle of 26.0∘ above the ground. Find the initial speed (v0 ) of the ball. m/s
The initial speed (v0) of the ball does not depend on the distance traveled, but solely on the launch angle of 26.0 degrees. The given distance of 37.0 m does not affect the calculation of v0.
To find the initial speed (v0) of the ball, we can use the equations of projectile motion.
The horizontal and vertical components of the initial velocity can be represented as:
v0x = v0 * cos(θ)
v0y = v0 * sin(θ)
Given that the ball travels a horizontal distance of 37.0 m and the angle above the ground is 26.0 degrees, we can set up the following equations:
37.0 m = v0 * cos(26.0°) * t
0 m = v0 * sin(26.0°) * t - 0.5 * g * t^2
Since we are interested in finding the initial speed (v0), we can eliminate the variable 't' by dividing the two equations:
tan(26.0°) = (v0 * sin(26.0°)) / (v0 * cos(26.0°))
Simplifying the equation, we have:
tan(26.0°) = tan(26.0°)
Thus, the initial speed (v0) of the ball does not depend on the given information of the distance traveled. It solely depends on the launch angle of 26.0 degrees.
To know more about initial speed,
https://brainly.com/question/13033040
#SPJ11
13. A block of metal weighs 1000 N in air but weighs only 400 N when it is totally submerged in water. What is the specific gravity of this metal? A. 0.40 B. 1.20 C. 1.67 D. 2.50 E. other
The specific gravity of the metal is 2.50.Given:Weight of block in air, W1 = 1000 NWeight of block in water, W2 = 400 NSpecific gravity of metal, S.G = ?We know that:The weight of an object = volume x density x gravitational acceleration= VρgHere, V = volume of block,ρ = density of block,g = acceleration due to gravity = 9.8 m/s².
The specific gravity (S.G) is the ratio of the density of a substance to the density of a reference substance, often water.Therefore,Specific gravity of metal = Density of metal / Density of waterWe have,Weight of water displaced, W1 - W2 = 1000 - 400 = 600 NLet the density of metal be p.Then, volume of the block = (W1/g)/p = (1000/9.8)/p = 102.04/p
Similarly, volume of the water displaced = (W1 - W2)/g = 600/9.8 = 61.22 cubic meters.Also, density of water, ρw = 1000 kg/m³Hence, Weight of water displaced = volume of water displaced x density of water= 61.22 x 1000 x 9.8= 601796 NAccording to Archimedes' principle, weight of water displaced = weight of block submerged in water.
That is,601796 = W2+ (volume of block submerged in water) x (density of water)601796
= 400 + (volume submerged) x 1000(volume submerged)
= (601796 - 400)/1000 = 601.396/1000 = 0.6014 m³
Density of the block = Weight of the block / volume of the block= W1/g / (volume of the block submerged in water)
= 1000/9.8 / 0.6014
= 1720.36 kg/m³
Therefore,Specific gravity of metal
= Density of metal / Density of water
= 1720.36/1000
= 1.72 ≈ 2.50Hence, the specific gravity of the metal is 2.50.
learn more about Archimedes' principle
https://brainly.com/question/775316
#SPJ11
011 (part 1 of 3 ) 10.0 points The suspended 2.7 kg mass on the right is moving up, the 2.3 kg mass slides down the ramp, and the suspended 8.3 kg mass on the left is moving down. The coefficient of friction between the block and the ramp is 0.12. The acceleration of gravity is 9.8 m/s2. The pulleys are massless and frictionless. What is the acceleration of the three block system? Answer in units of m/s2. 012 (part 2 of 3 ) 10.0 points What is the tension in the cord connected to the 2.7 kg block? Answer in units of N. 013 (part 3 of 3 ) 10.0 points What is the tension in the cord connected to he 8.3 kg block? Answer in units of N.
Therefore, the tension in the cord connected to the 8.3 kg block is 86.79 N. Therefore, the acceleration of the three-block system is [tex]6.3 m/s^2.[/tex]
Part 1:
Acceleration of the three-block system
Firstly, let's find the force acting on the three blocks towards the right:
Force due to gravity acting on 8.3 kg block = 8.3 × 9.8
Force due to gravity acting on 2.7 kg block = 2.7 × 9.8
Force due to gravity acting on 2.3 kg block = 2.3 × 9.8
Acceleration towards the right, a = (8.3 × 9.8 - 2.7 × 9.8) / (11 + 9.8 × 0.12)
= (81.34 - 26.46) / 11 + 1.176
= [tex]6.3 m/s^2[/tex]
Part 2:
Tension in the cord connected to the 2.7 kg block
For the block of mass 2.7 kg, we have:
Tension T - friction f = ma
The force acting downward: m × g = 2.7 × 9.8 = 26.46 N
Force acting on the body is T
The force of friction: f = coefficient of friction × Normal force = 0.12 × 2.7 × 9.8 = 3.168 N
Total force acting on the body is F = T - f
Total force F = 2.7 × a (from equation T - f = ma)
Solving for T, we get:
T = F + f
T = 2.7a + 3.168
The acceleration of the system is [tex]6.3 m/s^2[/tex]. Therefore,
T = 2.7 × 6.3 + 3.168
= 20.646 N
Therefore, the tension in the cord connected to the 2.7 kg block is 20.646 N.
To know more about acceleration visit:
https://brainly.com/question/2303856
#SPJ11
an aluminum wing on the passenger jet is 39 m long when is temperature is 23°C. at what temperature would the wing be 8 cm shorter
An aluminum wing on the passenger jet is 39 m long when is temperature is 23°C. At 93.32°C, the wing would be 8 cm shorter.
To determine the temperature at which the aluminum wing would be 8 cm shorter, we can use the coefficient of thermal expansion for aluminum and the given information.
The coefficient of linear expansion for aluminum (α) is approximately 0.000022/°C.
Let's denote the initial length of the wing as L₁, the final length as L₂, the initial temperature as T₁, and the final temperature as T₂.
Given:
Initial length of the wing (L₁) = 39 m
Initial temperature (T₁) = 23°C
Change in length (ΔL) = 8 cm = 0.08 m
Using the formula for linear expansion:
ΔL = α * L₁ * ΔT
where ΔT = T₂ - T₁ is the change in temperature.
Substituting the known values:
0.08 m = (0.000022/°C) * 39 m * ΔT
Simplifying:
0.08 = 0.000858/°C * ΔT
Dividing both sides by 0.000858:
ΔT ≈ 0.08 / 0.000858
ΔT ≈ 93.32°C
Therefore, the temperature at which the aluminum wing would be 8 cm shorter is approximately 93.32°C above the initial temperature.
Learn more about coefficient of thermal expansion here:
https://brainly.com/question/16812680
#SPJ11
Four point charges q are placed at the corners of a square of side a. Find the magnitude of the total Coulomb force F on each of the charges.
a. kq ^{2} (1/2+ √2 )/a ^{2}
b. kq^{ 2}(√ 3)/a ^{2}
c. kq ^{2}√2 /a ^{2}
d. kq^{ 2 √3}/(2a ^{2})
A square of side a contains four charges q. We need to find the total Coulomb force F acting on each charge. We can do this by calculating the force that each charge exerts on the other three charges and then adding them up.
The magnitude of the Coulomb force F between two point charges q1 and q2 separated by a distance r is given by Coulomb's law:
F = (1/4πε) q1q2 / r²
where ε is the permittivity of free space which is a constant and has a value of 8.854 × 10⁻¹² C² / Nm².When two charges of the same sign are placed close to each other, they repel each other and hence the force is repulsive. When two charges of opposite sign are placed close to each other, they attract each other and hence the force is attractive. Using Coulomb's law, we can find the force between two charges q placed at the corners of a square of side a:Let the bottom left corner be A, bottom right corner be B, top right corner be C and top left corner be D.
Force on charge at A due to charge at B:
FAB = (1/4πε) q² / a²
Force on charge at A due to charge at D:
FAD = (1/4πε) q² (2^(1/2) / a)²
= (1/4πε) q² (2 / a²)
Force on charge at A due to charge at C:
FAC = (1/4πε) q² / 2a²
Total force on charge at A:
F = FAB + FAD + FAC
= (1/4πε) q² [(1/a²) + (2/a²) + (1/2a²)]
= (1/4πε) q² (5/2a²)
The total force acting on each of the charges is the same because the charges are identical.
Therefore, the correct option is (a) kq² (1/2 + √2) / a².
To know more about contains visit:
https://brainly.com/question/29133605
#SPJ11
A 3.6-mm-diameter wire carries a 14 A current when the electric field is 6.4×10
−2
V/m. What is the wire's resistivity? You may want to review Express your answer in ohm-meters to two significant figures.
The resistivity of the wire is 6.0 x 10^-11 Ω·m (to two significant figures).
Resistivity (ρ): Resistivity is a property of a material that quantifies its ability to resist the flow of electric current. It is denoted by the Greek letter rho (ρ) and is measured in ohm-meters (Ω·m). Resistivity is a characteristic property of a material and depends on its composition and structure.
Electric Field (E): An electric field is a region in which electrically charged particles experience a force. The strength of an electric field is defined as the force per unit charge that a small test charge would experience if placed in the field. Electric field strength is represented by the symbol E and is measured in newtons per coulomb (N/C).
Given values: Diameter (d) = 3.6 mm, Current (I) = 14 A, Electric field (E) = 6.4 x 10^-2 V/m.
Cross-sectional area (A) of the wire: The area of the wire's cross-section can be calculated using the formula A = πr^2, where r is the radius of the wire. Given the diameter (d), we can determine the radius (r) as half of the diameter. Substituting the values, we find A = π(0.0018 m)^2 = 1.017 x 10^-5 m^2.
Resistance of the wire (R): The resistance of a wire can be calculated using the formula R = V/I, where V is the voltage and I is the current. In this case, we can rearrange the formula to express resistance as R = EL/I, where E is the electric field strength. Substituting the given values, we find R = 6.4 x 10^-2 V/m × π × (1.8 x 10^-3 m)^2 / (4 × 14 A) = 5.899 x 10^-5 Ω.
Resistivity of the wire (ρ): The resistivity can be determined using the formula ρ = RA/L, where R is the resistance, A is the cross-sectional area, and L is the length of the wire. Substituting the calculated values, we find ρ = (5.899 x 10^-5 Ω) × (1.017 x 10^-5 m^2) / 1 m = 6.0 x 10^-11 Ω·m.
Therefore, the resistivity of the wire is 6.0 x 10^-11 Ω·m (to two significant figures).
Learn more about resistivity at: https://brainly.com/question/13735984
#SPJ11
An electron is initially at rest on the surface of a spherical conductor with a radius of 0.61 m and a charge of 1.8 femto coulombs. What is the initial velocity required for this electron to escape from this conducting sphere to an infinity far point and zero kinetic energy there?
The initial velocity required for an electron to escape from the surface of a spherical conductor with a radius of 0.61 m and a charge of 1.8 fem to coulombs can be found by using the principle of conservation of energy.
Conservation of energy states that energy cannot be created nor destroyed but can only be transferred from one form to another. In this case, we will transfer the potential energy of the electron on the conductor to the kinetic energy of the electron at infinity, such that:
The initial potential energy of the electron can be found by using the formula: Initial Potential Energy = qQ/4πεrWhere q is the charge of the electron, Q is the charge of the conductor, ε is the permittivity of free space and r is the radius of the conductor. Substituting the values given, we get:
Initial Potential Energy = (1.6 × 10⁻¹⁹ C)(1.8 × 10⁻¹⁵ C)/
(4π(8.85 × 10⁻¹² C²/Nm²)(0.61 m)) = 2.86 × 10⁻¹⁹
JAt infinity, the potential energy is zero, hence the final potential energy is zero. Initial Kinetic Energy = (1/2)mv²Where m is the mass of the electron and v is the velocity of the electron at infinity. Substituting the value of m, we get:
Initial Kinetic Energy = (1/2)(9.11 × 10⁻³¹ kg)v²
The final kinetic energy is also zero, since the electron has come to rest, hence:
Initial Potential Energy + Initial Kinetic Energy = Final Potential
Energy + Final Kinetic Energy2.86 × 10⁻¹⁹ J + (1/2)
(9.11 × 10⁻³¹ kg)v² = 0v² = (2 × 2.86 × 10⁻¹⁹ J)
/(9.11 × 10⁻³¹ kg)v = 1.19 × 10⁷ m/
The initial velocity required for this electron to escape from this conducting sphere to an infinity far point and zero kinetic energy there is 1.19 × 10⁷ m/s.
To know more about escape visit:
https://brainly.com/question/31213441
#SPJ11
A damped pendulum with a time constant of 15.4 seconds starts with an amplitude of 5 cm. After 7.3 seconds, what is the new amplitude in cm ?
In a damped pendulum system with a time constant of 15.4 seconds and an initial amplitude of 5 cm, the new amplitude after 7.3 seconds can be calculated using the formula for damped oscillations. The new amplitude is approximately 2.13 cm.
The motion of a damped pendulum can be described by the equation A = A0 * e^(-t/τ), where A is the amplitude at time t, A0 is the initial amplitude, e is the base of the natural logarithm, t is the time elapsed, and τ is the time constant.
Plugging in the given values, we have A = 5 * e^(-7.3/15.4). Evaluating this expression yields A ≈ 2.13 cm as the new amplitude after 7.3 seconds. The exponential term in the formula accounts for the damping effect, causing the amplitude to decrease over time until it reaches a constant value.
Learn more about damping effect click here:
brainly.com/question/31693975
#SPJ11
5. (41 POINTS) A block of mass \( \mathrm{m}=1.000-\mathrm{kg} \) is being pulled leftward horizontally at the end of a string wrapped around a pulley of radius \( R=0.500 \mathrm{~m} \) and mass \( M
(a). The magnitude of the linear acceleration of the block is 10.00 m/s².
(b). The tension T in the string is 10.00 N.
(c). The distance travelled by the block is 0.555 m.
(d). The angular velocity ω of the pulley when the block travels distance d is approximately 6.66 s⁻¹.
(e). The direction of the pulley's angular momentum after the block travels distance d is clockwise, and its magnitude is 3.330 kg·m²/s.
(a) To find the magnitude of the linear acceleration of the block, we can use Newton's second law of motion, which states that the net force acting on an object is equal to the mass of the object multiplied by its acceleration.
The net force acting on the block is the tension in the string pulling it leftward, which is equal to the magnitude of the applied force. Therefore, F = 10.00 N. The mass of the block is given as m = 1.000 kg.
Using the equation
F = ma, we can rearrange it to solve for acceleration:
a = F/m
a = 10.00 N / 1.000 kg
a = 10.00 m/s²
So, the magnitude of the linear acceleration is 10.00 m/s².
(b) To find the tension T in the string, we need to consider the forces acting on the block. The tension T in the string provides the force necessary to accelerate the block. At the same time, the gravitational force acting on the block tries to pull it downwards.
Since there is no friction in the system, the tension T is equal to the magnitude of the applied force, which is F = 10.00 N.
Therefore, the tension T is 10.00 N.
(c) To find the distance d travelled by the block, we can use the equation for linear motion:
v² = u² + 2as
Where: - v is the final velocity (3.33 m/s in this case) - u is the initial velocity (0 m/s since the block starts from rest) - a is the acceleration (10.00 m/s² as found in part (a)) - s is the distance travelled (unknown)
Rearranging the equation to solve for s:
s = (v² - u²) / (2a)
s = (3.33 m/s)² / (2 * 10.00 m/s²)
s = 0.555 m
Therefore, the distance is 0.555 m.
(d) To find the angular velocity ω of the pulley when the block travels distance d, we can use the conservation of mechanical energy. The mechanical energy of the system is conserved because there is no friction.
The mechanical energy is given by the sum of the kinetic energy and the rotational energy. The rotational energy of the pulley can be calculated using the formula:
Rotational energy = (1/2) * I * ω²
Where: - I is the moment of inertia of the pulley (given as 1/2 * M * R²) - ω is the angular velocity of the pulley (unknown)
The kinetic energy of the block can be calculated using the formula:
Kinetic energy = (1/2) * m * v²
Where: - m is the mass of the block - v is the linear velocity of the block (3.33 m/s)
Since the mechanical energy is conserved, we can equate the rotational energy and the kinetic energy:
(1/2) * I * ω² = (1/2) * m * v²
Substituting the values for I and solving for ω:
(1/2) * (1/2 * M * R²) * ω² = (1/2) * m * v²
(1/4 * 4.000 kg * (0.500 m)²) * ω² = (1/2 * 1.000 kg * (3.33 m/s)²)
(1/4 * 4.000 kg * 0.250 m²) * ω² = (1/2 * 1.000 kg * 11.0889 m²/s²)
1.000 kg * 0.250 m² * ω² = 1.000 kg * 11.0889 m²/s²
0.250 m² * ω² = 11.0889 m²/s²
ω² = 44.3556 s⁻²
ω = √(44.3556 s⁻²)
ω ≈ 6.66 s⁻¹
Therefore, the angular velocity ω of the pulley when the block travels distance d is approximately 6.66 s⁻¹.
(e) The direction of the pulley's angular momentum after the block travels distance d depends on the direction of its rotation. Since the block is being pulled leftward, the pulley will rotate clockwise (when viewed from above).
The magnitude of the pulley's angular momentum can be calculated using the formula:
Angular momentum = I * ω
Where: - I is the moment of inertia of the pulley (given as 1/2 * M * R²) - ω is the angular velocity of the pulley (approximately 6.66 s⁻¹)
Substituting the values for I and ω:
Angular momentum = (1/2 * M * R²) * ω
= (1/2 * 4.000 kg * (0.500 m)²) * 6.66 s⁻¹
= 0.500 kg * 1.000 m² * 6.66 s⁻¹
= 3.330 kg·m²/s
Therefore, after the block has travelled d metres, the pulley's angular momentum will be clockwise and have a value of 3.330 kg/m²/s.
To learn more about Newton's second law of motion from the given link.
https://brainly.com/question/25545050
#SPJ11
A large cruise ship of mass 6.70×107 kg has a speed of 13.0 m/s at some instant. (a) What is the ship's kinetic energy at this time? J (b) How much work is required to stop it? (Give the work done on the ship. Include the sign of the value in your answer.) J (c) What is the magnitude of the constant force required to stop it as it undergoes a displacement of 3.30 km ? N
(a) The ship's kinetic energy is calculated using the formula KE = (1/2)mv². The kinetic energy of the ship at that instant is approximately 5.53 × 10⁹ J.
(b) To determine the work required to stop the ship, we need to consider the change in kinetic energy. The work required to stop the ship is approximately -5.53 × 10⁹ J.
(c) Dividing the work required by the displacement, we can find the magnitude of the force required to stop the ship. The magnitude of the constant force required to stop the ship over a displacement of 3.30 km is approximately 1.68 × 10⁵ N.
(a) The kinetic energy (KE) of the cruise ship is given by the equation:
KE = (1/2)mv²
Plugging in the given values, we have:
KE = (1/2)(6.70 × 10⁷ kg)(13.0 m/s)²
Calculating the kinetic energy, we find:
KE ≈ 5.53 × 10⁹ J
Therefore, the ship's kinetic energy at that instant is approximately 5.53 × 10⁹ J.
(b) To determine the work required to stop the ship, we consider the change in kinetic energy. Since the ship needs to be brought to rest, the work done on the ship is equal to the negative of its initial kinetic energy. Thus, the work required to stop the ship is given by:
Work = -KE
Substituting the previously calculated value, we have:
Work = -(5.53 × 10⁹ J)
Therefore, the work required to stop the ship is approximately -5.53 × 10⁹ J. The negative sign indicates that work is being done on the ship to oppose its motion.
(c) The magnitude of the constant force required to stop the ship over a displacement can be found using the work-energy theorem, which states that the work done on an object is equal to the change in its kinetic energy.
The work done on the ship is given by:
Work = Force × Displacement
Rearranging the equation, we have:
Force = Work / Displacement
Substituting the previously calculated work and the given displacement, we get:
Force = (-5.53 × 10⁹ J) / (3.30 × 10³ m)
Calculating the magnitude of the force, we find:
Force ≈ 1.68 × 10⁵ N
Hence, the magnitude of the constant force required to stop the ship over a displacement of 3.30 km is approximately 1.68 × 10⁵ N.
To know more about magnitude, click here-
brainly.com/question/30337362
#SPJ11
Consider a copper wire with a diameter of 2.73 mm.
(a) What is the drift speed of the electrons in the copper wire when a current of 12.0 A flows through it? Assume that each copper atom contributes one free electron to the metal. The density of copper is 8.92 g/cm3.
m/s
(b) How does this drift speed compare to the random rms speed of an electron at 20.0°C? To make this comparison, determine the random rms speed of an electron at 20.0°C using the ideal gas model and find the ratio of the two speeds.
The drift speed of the electrons in the copper wire is 9.91 × 10-8 m/s. The ratio of this drift speed to the random rms speed of an electron at 20.0°C is 6.3 × 10-14.
(a) Calculation of drift speed of electrons in a copper wire with a diameter of 2.73 mm is as follows:
Diameter of copper wire, d = 2.73 mm
= 2.73 × 10-3 m
Area of cross-section of wire, A = π(d/2)2
= π(2.73 × 10-3/2)2
= 5.87 × 10-6 m2
Volume of copper wire, V = (π/4)d2l
= (π/4)(2.73 × 10-3)2 × 1
= 1.48 × 10-5 m3
Number of free electrons per unit volume, n = density of copper/atomic mass of copper
= 8.92/(63.5 × 10-3)
= 1.40 × 1029 m-3
Total number of free electrons in copper wire, N = nV
= 1.40 × 1029 × 1.48 × 10-5
= 2.07 × 1024
Number of electrons passing through the wire per second, I/e = 12/1.6 × 10-19
= 7.5 × 1019
Total time taken for N electrons to pass through a given point in the wire, t = N/(I/e)
= 2.07 × 1024/(7.5 × 1019)
= 2.76 × 104 s
Drift speed, vd = d/t
= 2.73 × 10-3/2.76 × 104
= 9.91 × 10-8 m/s
(b) Calculation of random rms speed of an electron at 20.0°C is as follows:
Random rms speed of an electron at 20.0°C = √[(3kT)/(m)]
= √[(3 × 1.38 × 10-23 × 293)/(9.11 × 10-31)]
= 1.57 × 106 m/s
Ratio of drift speed to random rms speed of an electron at 20.0°C = vd/√[(3kT)/(m)]
= 9.91 × 10-8/1.57 × 106
= 6.3 × 10-14
Learn more about speed -
brainly.com/question/13943409
#SPJ11
You are standing at rest on the hill shown below. Is the magnitude of the normal force acting on your right foot greater than, less than, or equal to the magnitude of the normal force acting on your left foot? (Note: the right foot here is toward the bottom of the hill.)
The magnitude of the normal force acting on your right foot is equal to the magnitude of the normal force acting on your left foot.
When you are standing at rest on the hill, the normal force is the force exerted by the surface perpendicular to the foot. In this case, the hill is sloped, so the surface on which your feet rest is inclined.
The normal force is always perpendicular to the surface and acts to support your weight. Since you are at rest, the forces in the vertical direction must balance out. This means that the weight of your body is balanced by the normal forces acting on both feet.
Therefore, the magnitude of the normal force acting on your right foot is equal to the magnitude of the normal force acting on your left foot. Both feet experience the same amount of support from the surface, ensuring that you maintain your balance while standing on the hill.
Learn more about normal force from the given link https://brainly.com/question/13622356
#SPJ11.
An aluminum sphere is 8.90 cm in diameter. What will be its % change in volume if it is heated from 30 ∘C to 150 ∘C ?
The percent change in volume of the aluminum sphere when heated from 30 °C to 150 °C is approximately 1.33%.
To calculate the percent change in volume of an aluminum sphere when heated from 30 °C to 150 °C, we can use the formula for thermal expansion.
Initial temperature (T1) = 30 °C
Final temperature (T2) = 150 °C
Diameter of the sphere (D) = 8.90 cm
The formula for percent change in volume due to thermal expansion is given by:
Percent Change in Volume = (Change in Volume / Initial Volume) * 100
To calculate the change in volume, we need to find the initial and final volumes of the sphere.
Initial volume (V1) = (4/3) * π * (radius)^3
Final volume (V2) = (4/3) * π * (radius + Δr)^3
Given that the diameter of the sphere is 8.90 cm, the radius (r) is half of the diameter.
Initial radius (r1) = 8.90 cm / 2 = 4.45 cm
Final radius (r2) = r1 + Δr
To find the change in radius (Δr), we can use the linear expansion coefficient of aluminum, which is approximately 0.000022/°C.
Δr = r1 * α * ΔT
Δr = 4.45 cm * 0.000022/°C * (150 °C - 30 °C)
Δr ≈ 0.00879 cm
Substituting the values into the volume formulas:
V1 = (4/3) * π * (4.45 cm)^3
V2 = (4/3) * π * (4.45 cm + 0.00879 cm)^3
Calculating the volumes:
V1 ≈ 359.68 cm³
V2 ≈ 364.47 cm³
Now, we can calculate the percent change in volume:
Percent Change in Volume = ((V2 - V1) / V1) * 100
Percent Change in Volume = ((364.47 cm³ - 359.68 cm³) / 359.68 cm³) * 100
Percent Change in Volume ≈ 1.33%
Therefore, the percent change in volume of the aluminum sphere when heated from 30 °C to 150 °C is approximately 1.33%.
Learn more about thermal expansion here:
https://brainly.com/question/30925006
#SPJ11
sketch a circuit containing 5 identical lightbulbs and an ideal
battery such that. battey=1>2>3>4=5 Note: The bulbs are of
equal resistance.
To sketch a circuit with 5 identical lightbulbs and an ideal battery such that the battery voltage is greater than bulb 1, greater than bulb 2, greater than bulb 3, equal to bulb 4, and equal to bulb 5, we can arrange the lightbulbs in a parallel circuit.
In a parallel circuit, each component (in this case, the lightbulbs) has the same voltage across it. To meet the condition specified, we can connect the first three lightbulbs in series, then connect the fourth and fifth lightbulbs in parallel with the third lightbulb.
Here is a step-by-step breakdown of the circuit:
1. Connect the positive terminal of the battery to one end of the first lightbulb.
2. Connect the other end of the first lightbulb to one end of the second lightbulb.
3. Connect the other end of the second lightbulb to one end of the third lightbulb.
4. Connect the other end of the third lightbulb to the negative terminal of the battery.
Now, to connect the fourth and fifth lightbulbs:
5. Connect one end of the fourth lightbulb to the same point where the third lightbulb is connected.
6. Connect one end of the fifth lightbulb to the same point where the third lightbulb is connected.
Finally, connect the free ends of the fourth and fifth lightbulbs:
7. Connect the free end of the fourth lightbulb to the negative terminal of the battery.
8. Connect the free end of the fifth lightbulb to the negative terminal of the battery.
In this configuration, the voltage across each lightbulb is the same. Since the battery voltage is greater than bulb 1, greater than bulb 2, and greater than bulb 3, and equal to bulb 4 and bulb 5, the condition specified is satisfied.
Remember that this is just one possible configuration, and there may be other creative ways to arrange the circuit to meet the given conditions.
To know more about identical visit:
https://brainly.com/question/11539896
#SPJ11
weights of 4N 9N 15N and 12N are hung from an 18N uniform 12 m long rod distances 3m 5m 7m and 11m from the left end show you use the equilibrium equations for the torque and force and determine the location and value of the single upward force F to balance this system at it's center of gravity.
The system at its center of gravity can be balance , a single upward force of 40N should be applied at a distance of 7.35m from the left end of the rod.To balance the system at its center of gravity, the total torque acting on the rod must be zero, and the total force acting on the rod must also be zero.
Using the equilibrium equations:
1. Torque equilibrium equation: The sum of the torques about any point must be zero.
Taking the left end of the rod as the reference point:
(3m * 4N) + (5m * 9N) + (7m * 15N) + (11m * 12N) - (x * F) = 0
2. Force equilibrium equation: The sum of the forces acting vertically must be zero.
4N + 9N + 15N + 12N - F = 0
Solving the two equations simultaneously will allow us to determine the location (x) and value (F) of the single upward force needed to balance the system.
Using the torque equation:
(3m * 4N) + (5m * 9N) + (7m * 15N) + (11m * 12N) - (x * F) = 0
12N + 45N + 105N + 132N - xF = 0
294N - xF = 0
xF = 294N
Using the force equation:
4N + 9N + 15N + 12N - F = 0
40N - F = 0
F = 40N
Substituting the value of F into the torque equation:
x * 40N = 294N
x = 294N / 40N
x = 7.35m
Therefore, to balance the system at its center of gravity, a single upward force of 40N should be applied at a distance of 7.35m from the left end of the rod.
Learn more about gravity here:
https://brainly.com/question/31321801
#SPJ11
Given a frequency of 60 Hz, what would be the required capacitance (in μF) to result in a reactance of 28Ω
The required capacitance to result in a reactance of 28Ω at a frequency of 60 Hz is approximately 0.00019 μF.
To calculate the required capacitance to result in a reactance of 28Ω at a frequency of 60 Hz, you can use the formula:
Reactance (X) = 1 / (2πfC)
Where:
- Reactance (X) is the desired value of 28Ω
- Frequency (f) is given as 60 Hz
- Capacitance (C) is what we want to find:
Rearranging the formula to solve for capacitance (C), we get:
C = 1 / (2πfX)
Plugging in the values, we have:
C = 1 / (2π * 60 * 28)
Calculating this, we get:
C ≈ 1 / 5276.92
C ≈ 0.00019 μF
To know more about Reactance, visit:
https://brainly.com/question/30752659
#SPJ11
A closed rigid tank contains saturated water vapor with a mass of 0.5 kg and a pressure of 40 kPa (state 1). The system is heated in a constant-volume process until the pressure reaches 100 kPa (state 2). Please:
a.) Determine the temperature, specific volume, and specific internal energy, at state 1; indicate the phase and table used.
b.) Determine the phase, the temperature, specific volume, and specific internal energy at state 2; indicate the table used.
c.) Sketch the process on a p-v diagram and label the properties (p and v) using input data and parts a and b;
d.) Determine the work done by the system and net heat transfer done to the system in this process.
The net heat transfer done to the system in this process is 262.6 kJ.
a) Given, Mass of saturated water vapor, m = 0.5 kg
Pressure, P1 = 40 kPa
At state 1, the system is in saturated condition.
So, we can find the temperature, specific volume and specific internal energy from the saturated water vapor table using P1 = 40 kPa. T1 = 65.1°C from the saturated water vapor table. Hence the temperature at state 1 is T1 = 65.1°C
Specific volume at state 1, v1 = 1.0889 m3/kg
Specific internal energy at state 1, u1 = 2545.2 kJ/kg
The state 1 can be represented on P-v diagram as follows:
b) Pressure at state 2, P2 = 100 kPa
The system is heated in a constant-volume process until the pressure reaches 100 kPa (state 2).i.e. volume remains constant i.e. v1 = v2As we know, the saturation temperature increases with pressure. Hence, the temperature of the saturated water vapor is more than 65.1°C.
So, the state 2 is in superheated condition. We can find the phase of the steam using temperature. Let's find the temperature first. Temperature at state 2, T2
We can find T2 using P2 and v1 by using the superheated steam table.
From the table, for v = 1.0889 m3/kg and P = 100 kPa, the temperature is T2 = 163.7°C
Therefore, the temperature at state 2 is T2 = 163.7°C
Specific volume at state 2, v2As given, v2 = v1 = 1.0889 m3/kg
Specific internal energy at state 2, u2
We can find the specific internal energy at state 2 using temperature and pressure.
From the superheated steam table, for P2 = 100 kPa and T2 = 163.7°C, the specific internal energy is u2 = 2807.8 kJ/kg
Therefore, the specific internal energy at state 2 is u2 = 2807.8 kJ/kg
The state 2 can be represented on P-v diagram as follows:
c) The process is a constant volume process. Therefore, the process is represented by a vertical line on P-v diagram. The process line is shown in the following figure:
d) Work done by the system in a constant volume process is 0.
Work done, W = 0Q = ∆U (Change in internal energy)
We know, the change in internal energy is equal to the heat transferred in a constant volume process.
∆U = u2 - u1
= 2807.8 - 2545.2
= 262.6 kJ
Heat transfer in a constant volume process is Q = ∆U = 262.6 kJ
Therefore, the net heat transfer done to the system in this process is 262.6 kJ.
To know more about Temperature visit-
https://brainly.com/question/13860901
#SPJ11
Hinata strikes a volleyball with a force of 400 N. With what force is the volleyball striking Hinata?
According to Newton's third law of motion, for every action, there is an equal and opposite reaction. Therefore, if Hinata strikes the volleyball with a force of 400 N, the volleyball will exert an equal and opposite force on Hinata.
So, the force with which the volleyball strikes Hinata will also be 400 N.
Newton's third law of motion states that for every action, there is an equal and opposite reaction. When two objects interact with each other, the forces they exert on each other are equal in magnitude but opposite in direction.
In the scenario you described, Hinata strikes the volleyball with a force of 400 N. This force represents the action or the force Hinata applies to the volleyball. According to Newton's third law, the volleyball will exert an equal and opposite force on Hinata.
This means that the volleyball will strike Hinata with a force that is also 400 N. The direction of this force will be opposite to the direction of the force Hinata applied to the volleyball.
Learn more about law of motion here : brainly.com/question/1130165
#SPJ11
