The teacher said the volume of the liquid was 500 mL when measured a student found it was 499.7 mL what is the students percent error

Answers

Answer 1

Answer:

0.06 %

Explanation:

The percentage error of a certain measurement can be found by using the formula

[tex]P(\%) = \frac{error}{actual \: \: number} \times 100\% \\ [/tex]

From the question

error = 500 - 499.7 = 0.3

actual volume = 500 mL

We have

[tex]p(\%) = \frac{0.3}{500} \times 100 \\ = \frac{3}{50} \\ [/tex]

We have the final answer as

0.06 %

Hope this helps you


Related Questions

What will the weather most likely be like if a low pressure system settles over an area

Answers

Answer:

Low-pressure systems are associated with clouds and precipitation that minimize temperature changes throughout the day.

Explanation:

Please help answer!!!​

Answers

Answer:

C stays the same ez

Explanation:

A piston contains 0.39L of air at 1.0 atm. If the pressure on the piston is increased to 5.6 atm, what is the new volume?

Answers

The new volume : 0.07 L

Further explanation

Boyle's Law  

At a constant temperature, the gas volume is inversely proportional to the pressure applied  

[tex]\rm p_1V_1=p_2.V_2\\\\\dfrac{p_1}{p_2}=\dfrac{V_2}{V_1}[/tex]

P₁=1 atm

V₁=0.39 L

P₂=5.6 atm

[tex]\tt V_2=\dfrac{P_1.V_1}{P_2}\\\\V_2=\dfrac{1\times 0.39}{5.6}\\\\v_2=\boxed{\bold{0.07~L}}[/tex]

Vsepr diagram for phcl2

Answers

Huh ???? I’m confused

what type of reactions are the following? ( single displacement, double displacement, synthesis, or decomposition)
4Mn3O4(s) + O2(g) -> 6Mn2O3(s)
Al2O3(aq) + 3C(s) ->3CO(g) + 2Al(l)
Ba(C2H3O2)2(aq) + Na2CO3(aq) -> BaCO3(s) +2NaC2H3O2(aq)
KOH(aq)+HBr(aq) -> KBr(aq)+H2O(l)

Answers

Answer:

1. synthesis

2. single displacement

3.double displacement

4.double displacement

Explanation:

1. here Mangananes (iv) oxide further reacts with oxygen to form Manganese (iii) oxide , two reactants making one product .

2. Carbon replaces aluminium from aluminium oxide to make pure aluminium and carbon monoxide and carbon dioxide.

3. sodium replaces barium to make sodium acetate , barium replaces sodium to make barium carbonate ( precipitate )

4. potassium replaces Hydrogen to produce potassium bromide, while hydrogen and hydroxide ions combine to make water .

I did a chocolate lab. It was melting chocolate. These are the tree question please answer all. Please help me ASAP

Answers

Answer:

no the mass will not change

Explanation:

For all six solutions tested during this experiment,
the
is always the same. That
means that it is a constant throughout the
experiment
You can infer from this experiment that the
difference in the solutions is due to the
which will cause different flame
colors.

Answers

Answer:

1. Chloride ion

2. Metal ion

3. The same as a sample with the identical metal ion.

Explanation: I Just took the quiz on Edge 2021

Which is a valid velocity reading for an object? 45 m/s 45 m/s north 0 m/s south 0 m/s

Answers

Answer:

45 m/s north

Explanation:

Edge 2020

Answer: (B) 45 m/s north

Explanation: right on edge 2020 (so basically the same reason as person above)

Genes can be best defined as:


A. the traits expressed by the organism

B. the DNA that make up a chromosome

C. a form of reproduction

D. section of DNA that codes for a specific trait

Answers

Answer:

D. section of DNA that codes for a specific trait

Explanation:

Genes are sections of the DNA that codes for a specific trait. They are simply defined as the basic physical and functional unit of hereditary.

Genes are usually found encoded in the DNA. The effects produced by genes result from their coordination of certain protein synthesis activities. Inheritance is attained when genes are passed from parents to offspring.

Which orbitals cannot exist?
2p 3p 4d 3f 6s 2d
Mark all that are wrong.

Answers

Answer:

The orbitals 3f and 2d cannot exist.

Explanation:

Hello!

In this case, considering the attached picture in which you find each energy level with the corresponding number of subshells, it is possible to infer level one has s subshell only, level 2 s and p, level 3 has s, p and d and from level 4 to 7 have s, p, d f, therefore, the orbitals 3f and 2d cannot exist.

Best regards!

4. An atom is neutral because it has the same number of protons as it has:
electrons
O neutrons
O Neither... An atom isn't neutral!

Answers

Neutrons the way this question is setup the atom would not be able to be neutral

Taking into account the constitution of an atom, an atom is neutral because it has the same number of protons as it has electrons.

Constitution of an atom

An atom is the smallest constituent unit of ordinary matter that has the properties of a chemical element.

Every atom consists of a nucleus in which neutrons and protons meet and energy levels where electrons are located.

The neutron is an electrically neutral subatomic particle, while the proton has a positive electrical charge. Electrons have a negative charge, move around the nucleus at different energy levels and are attracted to protons, positive in the atom through electromagnetic force.

Atom electrically neutral

An atom is considered electrically neutral when it has the same number of positive and negative charges. That is, an electrically neutral atom has the same number of protons (with a positive charge) and electrons (with a negative charge).

In summary, an atom is neutral because it has the same number of protons as it has electrons.

Learn more about atom electrically neutral:

brainly.com/question/1814899

brainly.com/question/2449569

#SPJ2

Sam read that all subsystems interact with each other. Which example shows how changes in the cryosphere can affect the geosphere?

Answers

Answer:

Land that gains weight can rise slowly.

Explanation:

:D

What mass of water can be heated from 10.0 C to 38.0 Celsius by addition of 3,500j? (Specific heat capacity of water is 4.18 j/g C)

Answers

Mass of water : 29.904 g

Further explanation

Heat can be formulated

Q=m.c.Δt

Q, heat, J

m,mass, g

c, specific heat, j/g C

Δt,temperature, C

Δt,temperature

[tex]\tt 38-10=28^oC[/tex]

mass of water

[tex]\tt m=\dfrac{Q}{c.\Delta t}\\\\m=\dfrac{3500}{4.18\times 28}\\\\m=29.904~g[/tex]

ILL GIVE BRAINLIST


How many valence electrons does boron gain when it becomes an anion?


A. 2

B. 3

C. 4

D. 5

Answers

Answer:

5

Explanation:

answer is c because if you add the them up you get 5

Sulfur (S) and oxygen gas (02) undergo a chemical
reaction to form sulfur trioxide (SO3).

Answers

Answer:

C

Explanation:

I just think it is the right answer :) Sorry if I am wrong..

Answer:

c

Explanation:

8. How much heat is released when 85.0 g of steam condense to liquid water?

Answers

Answer:

199920J

Explanation:

Given parameters:

Mass of steam  = 85g

Unknown:

Heat released when the liquid is condensed  = ?

Solution:

The heat released by the substance is given as;

         H  = mL

H is the heat released

m is the mass

L is the latent heat of steam  = 2352J/g

Heat released  = 85 x 2352  = 199920J

Which of these is the best procedure to determine the concentration of a basic solution?
Click the answer you think is right.
Titration with an acid
Flame test
Density determination
Precipitation followed by gravimetric analysis
Dilution with H20

Answers

Answer:

IM VERY SORRY HAVE A GOOD DAY\\

Explanation:

How many moles are in 8.30 X 10 to the power of 23, molecules of CO2?

Answers

Answer:

1.38 moles

Explanation:

To find the number of moles in a substance given it's number of entities we use the formula

[tex]n = \frac{N}{L} \\[/tex]

where n is the number of moles

N is the number of entities

L is the Avogadro's constant which is

6.02 × 10²³ entities

From the question we have

[tex]n = \frac{8.30 \times {10}^{23} }{6.02 \times {10}^{23} } = \frac{8.3}{6.02} \\ = 1.3787...[/tex]

We have the final answer as

1.38 moles

Hope this helps you

The attraction that nonpolar molecules have for each
other is primarily caused by the presence of

Answers

Answer:

Van der waals forces

Explanation:

I just know

20 mL of 0.25 M of NH 3 is titrated with 0.40 M HCl. Calculate the pH of the solution after 20 mL HCl is added. Kb (NH3) = 1.8 × 10 −5.
a. 12.50
b. 7.00
c. 4.74
d. 1.12

Answers

Answer:

the pH of the solution after 20 mL HCl was added is 1.12

Option d) 1.12 is the correct answer

Explanation:

Firstly; number of mmols of NH₃ before addition of HCl = M x V = 0.25 x 20 = 5

Also number of mmols pf HCl added = M x V = 0.40 x 20 = 8

Number of mmols of NH₄Cl formed

= number of mmols of NH3 before addition of HCl = 5

Number of mmoles of HCl remained = 8 – 5 = 3

Therefore Total volume of solution = 20 + 20 = 40 mL

Molarity of HCl = 3 / 40 = 0.075 M

Molarity of NH₄Cl = 5 / 40 = 0.125 M

Therefore

Ka x Kb = 10⁻¹⁴

Ka x 1.8 x 10⁻⁵ = 10⁻¹⁴

Ka (NH₄Cl) = 5.56 x 10⁻¹⁰

[H+] from HCl = 0.075 M

[H+] from NH₄Cl = (Ka x C)^1/2

= (5.56 x 10⁻¹⁰ x 0.125)^1/2 = 8.34 x 10⁻⁶

Hence, [H+] from NH₄Cl is negligible.

pH = -log 0.075

pH = 1.12

Therefore the pH of the solution after 20 mL HCl was added is 1.12

Option d) 1.12 is the correct answer

Scientists must be open to questioning everything, even the things they think they already know. Which sentence from the article provides the BEST support to the statement above? (A) Scientific discoveries do not take place overnight, and many are small and gradual. (B) Chances are, you'll stumble many times before you find your footing, and that's OK. (C) We live in a world where knowledge and uncertainty can and do coexist. (D) When we are curious about other people, we can become more compassionate.​

Answers

Answer:

The sentence that best supports the statement above is (C) We live in a world where knowledge and uncertainty can and do coexist

What mass (in g) of lithium metal can be produced by the electrolysis of molten LiCl for 23.93 hr with an electrical current of 17.7?

Answers

Answer:

1.828 g

Explanation:

The half-reaction is:

Li⁺ + 1e⁻ → Li(s)

First we calculate the coulombs:

Coulombs = Amperes * seconds23.93 hr * 60 = 1435.8 sCoulombs = 17.7 A * 1435.8 s = 25413.66 C

Then we calculate the number of lithium moles, using Faraday's constant:

25413.66 C * [tex]\frac{1mol(e^-)}{96485C} *\frac{1molLi}{1mol(e^-)}[/tex] = 0.2634 mol Li

Finally we convert moles to grams:

0.2634 mol Li * 6.941 g/mol = 1.828 g

List at least four characteristics of salts.
Please help me hurry
50points

Answers

Answer:

Salt is cubed, crystal like, grainy, and shiny

Explanation:

Answer:

salt is basic in nature

it is of diffrent type

they are of 4 type

1 is sodium hydroxide

2 is bleaching powder

3 is baking soda

4 is washing soda

It is a vocal music of Mindoro​

Answers

Answer:

instrumental music is used in festivals, rituals, etc.

Explanation:

Consider the following isomerization reactions of some simple sugars and values for their standard Gibbs free energy ΔGo:reaction A: glucose-1-phosphate rightarrow glucose-6-phosphate, ΔGo = -7.28 kJ/mol reaction B: fructose-6-phosphate rightarrow glucose-6-phosphate, ΔGo = -1.67 kJ/molCalculate for the isomerization of glucose-1-phosphate to fructose-6-phosphate.Calculate the equilibrium constant K for the isomerization of glucose-1-phosphate to fructose-6-phosphate at 298 K.

Answers

Answer:

Explanation:

glucose-1-phosphate  →  glucose-6-phosphate,  ΔGo = -7.28 kJ/mol

fructose-6-phosphate → glucose-6-phosphate,    ΔGo = -1.67 kJ/mol

subtracting the equation

glucose-1-phosphate - fructose-6-phosphate  = 0 , ΔGo =  -7.28  - ( -1.67 ) kJ / mol

glucose-1-phosphate  = fructose-6-phosphate      ΔGo  = - 5.61 kJ / mol

- ΔGo = RT lnK

5.61 x 10³ = 8.31 x 298 x lnK

lnK = 2.265

K = 9.63 .

A weight of 22.25g was obtained when 10-mL of water at 27C was pipet to empty Erlenmeyer flask. What is the volume delivered by the pipet?

Answers

Answer:

the volume delivered by the pipette = 22.32 mL

Explanation:

To calculate this, let us first note that the density of water relates it weight and its volume (density = mass ÷ volume), hence we are going to use density to determine the volume.

Density of water = mass/volume = 0.997 g/ mL

mass = 22.25g

Density = 0.997g/mL

volume = ?

[tex]density = \frac{mass}{volume}\\\therefore volume = \frac{mass}{density}\\volume = \frac{22.25}{0.997}\\volume = 22.32\ mL[/tex]

∴ the volume delivered by the pipette = 22.32 mL

Please note that this calculation is based on the fact that the weight of the empty flask has been determined and canceled out.

This is how osmium appears in the periodic table.A purple box has O s at the center and 76 above. Below it says osmium and below that 190.23.

Rounded to the nearest whole number, how many neutrons, on average, are in an atom of osmium?

76
114
190
266

Answers

Answer:

it B 114 on edge 2020

Explanation:

UwU

Answer:

it B 114

Explanation:

List three types of cyclic motion. FIRST GET BRAINLEIST

Answers

Answer:

translational, rotational, and oscillatory.

Explanation:

What does a weather map use to represent areas of high air pressure?

An "A"

An "H"

An "L"

A "P"

Answers

A weather map used an “h” to represent areas of higher air pressure

Answer:

H

Explanation:

suppose you wanted to make 100 grams of water what is the molar mass of water

Answers

18.01528 g/mol


explanation:
Other Questions
Lab: Types of Chemical ReactionsStudent GuideThis laboratory allows you to study various kinds of chemical reactions, including some that result in precipitates.Lesson Objectives Compare and contrast synthesis, single-displacement, and double-displacement reactions.PREPAREApproximate lesson time is 60 minutes.Materials Lab Instructions: Lab_5.08_Instructions_modified_2020 Lab Report: Lab_5.08_Report_modified_2020 Lab Guidelines: Lab_Guidelines_modifiedLEARNActivity 1: Types of Chemical Reactions 1InstructionsAs you read through the lesson online, use the space below to take notes.In this laboratory, you will study different kinds of chemical reactions.Knowing the types of reactions helps you interpret your observations.In a synthesis reaction, two reactants unite to form a third product.In a single-displacement reaction, one ion of a reactant bonds with the second reactant.In a double-displacement reaction, ions of both reactants change places.Activity 2: Types of Chemical Reactions 1InstructionsProcedure1. Open the Chemical Reactions Virtual Lab.2. Click View the Tutorial and complete the tutorial to learn how to conduct the lab.3. Close the tutorial and click begin the Lab.Part 1 Synthesis Reaction4. Perform the procedure, placing the magnesium strip in the flame.5. Record your reaction.6. Research the chemical reaction of magnesium and oxygen gas. Write an equation for the chemical reactionthat accounts for the observed reaction in this part of the lab.7. Answer the question: What is a synthesis reaction?8. Answer the questions on Part 1 in the Lab Report.Part 2 Single Displacement Reaction9. Place 1 scoop of zinc in Vial A and add 10 drops of copper (II) sulfate. Observe the reaction.10. Place ball of aluminum in Vial B and add 10 drops of copper (II) sulfate. Observe the reaction.11. Place 1 scoop of zinc in Vial C and add 10 drops of silver nitrate. Observe the reaction.12. Place copper wire in Vial D and add 10 drops of silver nitrate, wait 5 minutes. Observe the reaction.13. Complete the ta fixed plz help i need 100% does y-intercept and the x-intercept be the same point on a graph/ Find the slope and y-intercept of the following graph. There are 10 computers and 5 students. How many ways are there for the students to sit at the computers if no computer has more than one student and each student is seated at a computer? Evaluate if k = 21 and j = 9 Write the equation of a line that safely lands the plane. Press submit to see if the plane lands safely. What covers most of the Arabian Peninsula?A) desert B) grassy plainsC) mountains D) swamp 4. Identify the Y-Intercept from the table: When exercising or engaging in physical activity, it's important to realize that your personal decisions have little effect on your safety? ANY MATH EXPERTS PLS HELP RN I GOT 30 MIN LEFT I PUT 100 POINTS Write an equation for the line in slope-intercept form. which blood component protein is present in the greatest amounts in the plasma? If a wave is traveling at a steady speed and its frequency isdoubled, what happens to the wavelength of that wave? The climate region labeled with the letter E on the map above is the __________ region.A.humid continentalB.subarcticC.semiaridD.highlands Please help Ill mark brainliest! Chemistry Read the excerpt from "George Washington.He realized early that the best strategy was to harass the British. He reported to Congress, "we should on all occasions avoid a general action, or put anything to the risque, unless compelled by a necessity, into which we ought never to be drawn." Ensuing battles saw him fall back slowly, then strike unexpectedly. Finally in 1781 with the aid of French allieshe forced the surrender of Cornwallis at Yorktown.Which provides the best objective summary of this excerpt?Washingtons key battle strategy of harassment against the British led to the surrender of Cornwallis in 1781.If it were not for Americas French allies, Washington would not have been able to force the surrender of Cornwallis.Washington made many speeches to Congress during the war against the British while he was an army commander.Finally in 1781with the aid of French alliesWashington forced the surrender of Cornwallis at Yorktown. What change in surface area to volume is expected to result in a faster rate of diffusion? How did the environment of the americas suffer from the European contact? How did it Benifits? Can you please used these words in a sentence.1. " reincarnation" and "because" 2.polytheistic and so3. caste system and but