Answer:
Variable costing $28.3
Absorption costing $37.4
Explanation:
Calculation to determine the unit cost using variable costing and absorption costing.
VARIABLE COSTING
Material $8.10/unit
Direct labor $11.10/unit;
Variable manufacturing overhead per unit $9.10/unit
Units cost $28.3
ABSORPTION COSTING
Material $8.10/unit
Direct labor $11.10/unit;
Variable manufacturing overhead per unit $9.10/unit.
Fixed manufacturing overhead per unit $9.10/unit.
($373,100 ÷ 41,000 units)
Units cost $37.4
Therefore the unit cost using variable costing and absorption costing are:
Variable costing $28.3
Absorption costing $37.4
The Economic Order Quantity is when: holding costs equal ordering costs total costs are minimized the product cost is not considered to determine the quantity to be purchased all of the above none of the above
Answer: all of the above
Explanation:
At the Economic Order Quantity level, the company is enjoying the lowest cost possible in relation to product ordering and storage because they are ordering just enough quantities that they are able to sell them just in time to order some new goods.
For this to happen, the holding cost must be equal to the ordering costs. At the EOQ, the product cost is irrelevant when the quantity to be bought is to be determined because it is minimized.
Cantor Corporation acquired a manufacturing facility on four acres of land for a lump-sum price of $8,000,000. The building included used but functional equipment. According to independent appraisals, the fair values were $4,500,000, $3,000,000, and $2,500,000 for the building, land, and equipment, respectively. The initial values of the building, land, and equipment in the general ledger would be:
Answer:
Land= 27,000,000
Equipment= 22,500,000
Building= 4,050,000
Explanation:
The first step is to calculate the total fair value
= 4,500,000+3,000,000+2,500,000
= 10,000,000
Therefore the initial volume of the land can be calculated as follows
= 9,000,000(3,000,000/10,000,000)
= 9,000,000×3
= 27,000,000
Initial value of the equipment is
= 9,000,000(2,500,000/10,000,000)
= 9,000,000(2.5)
= 22,500,000
Initial value of the building is
= 9,000,000(4,500,000/10,000,000)
= 9,000,000(0.45)
= 4,050,000
A company is facing a class-action lawsuit in the upcoming year. It is possible, but not probable, that the company will have to pay a settlement of approximately $2,000,000. How would this fact be reported in the financial statements to be issued at the end of the current month
Answer:
Disclose the $2,000,000 as a Contingent Liability in the Notes
Explanation:
The Company shall Disclose the $2,000,000 as a Contingent Liability in the Notes.
A Contingent Liability is a Liability whose timing or amount is uncertain
MC Qu. 98 Garcia Corporation's April sales forecast... Garcia Corporation's April sales forecast projects that 6,100 units will sell at a price of $10.60 per unit. The desired ending inventory is 10% higher than the beginning inventory, which was 1,100 units. Budgeted purchases of units in April would be:
Answer:
Total budgeted purchases = $65,826
Explanation:
Budgeted purchases
Sales forecast = 6,100 units
Ending inventory 1,100 * 110% = 1,210 units
Required units = 7,310
- Beginning inventory = 1,100 units
Units to be purchased = 6,210
Cost per unit = $10.60
Total budgeted purchases = $65,826
Exercise 8-22 Evaluating efficient use of assets LO A1 Lok Co. reports net sales of $5,856,480 for Year 2 and $8,679,690 for Year 3. End-of-year balances for total assets are Year 1, $1,686,000; Year 2, $1,800,000; and Year 3, $1,982,000. (1) Compute Lok's total asset turnover for Year 2 and Year 3.
Answer:
Total asset turnover = Net sales / Average total assets
Year 2:
= 5,856,480 / (1,686,000 + 1,800,000) / 2
= 5,856,480 / 1,743,000
= 3.36
Year 3:
= 8,679,690 / (1,800,000 + 1,982,000) / 2
= 8,679,690 / 1,891,000
= 4.59
Bearington Enterprises uses an activity-based costing system to assign costs in its auto-parts division.
Activity Est. Indirect Activity Costs Allocation Base Cost Allocation Rate
Materials $60,000 Material moves $5.00/move
Assembling $175,000 Direct labor hours $5.00/dir. labor hour
Packaging $70,000 # of finished units $2.50/finished unit
The following units were produced in December with the following information:
Part # # Produced Materials Costs # Moves Dir. Labor Hrs.
Part 001 1,350 $2,500 100 500
Part 002 5,500 $5,000 400 200
Part 003 4,050 $7,000 2,800 1,550
Total manufacturing costs for Part 003 are : _______
Answer:
the Total manufacturing costs for Part 003 is $38,875
Explanation:
The computation of the Total manufacturing costs for Part 003 is given below:
= material cost + indirect cost
= $7000 + (2,800 × $5) + (1550 × $5) + (4,050 × $2.50)
= $7,000 + $14,000 + $7,750 + $10,125
= $38,875
Hence, the Total manufacturing costs for Part 003 is $38,875
The same should be considered and relevant
Riverbend Inc. received a $240,000 dividend from stock it held in Hobble Corporation. Riverbend's taxable income is $2,710,000 before deducting the dividends received deduction (DRD), a $50,500 NOL carryover, and a $153,000 charitable contribution.
Corporate Income Tax Rates
Taxable Income Tax
$50,000 15% of the taxable income
$50,000-$75,000 $7,500 + 25% of taxable income over $50,000
$75,000-$100,000 $13,750 + 34% of taxable income over $75,000
$100,000-$335,000 $22,250 + 39% of taxable income over $100,000
$335,000-$10,000,000 $113,900 + 34% of taxable income over $335,000
$10,000,000-$15,000,000 $3,400,000 + 35% of taxable income over $10,000,000
$15,000,000-$18,333,333 $5,150,000 + 38% of taxable income over $15,000,000
Over $18,333,333 35% of the taxable income
a. What is Riverbend’s deductible DRD assuming it owns 11 percent of Hobble Corporation?
b. Assuming the facts in part (a), what is Riverbend’s marginal tax rate on the dividend?
c. What is Riverbend’s DRD assuming it owns 36 percent of Hobble Corporation?
d. Assuming the facts in part (c), what is Riverbend’s marginal tax rate on the dividend?
e. What is Riverbend’s DRD assuming it owns 89 percent of Hobble Corporation (and is part of the same affiliated group)?
f. Assuming the facts in part (e), what is Riverbend’s marginal tax rate on the dividend?
The following data from the just completed year are taken from the accounting records of Mason Company:
Sales $656,000
Direct labor cost $80,000
Raw material purchases $135,000
Selling expenses $105,000
Administrative expenses $41,000
Manufacturing overhead
applied to work in process $201,000
Actual manufacturing
overhead costs $222,000
Required:
a. Prepare a schedule of cost of goods manufactured. Assume all raw materials used in production were direct materials.
b. Prepare a schedule of cost of goods sold. Assume that the company's underapplied or overapplied overhead is closed to Cost of Goods Sold.
c. Prepare an income statement.
Answer:
Mason Company
a) Schedule of Cost of Goods Manufactured:
Direct labor cost $80,000
Raw material purchases $135,000
Manufacturing overhead
applied to work in process $201,000
Cost of goods manufactured $416,000
b) Schedule of Cost of Goods Sold:
Cost of goods manufactured $416,000
Under-applied overhead 21,000
Cost of goods sold $437,000
c) Income Statement:
Sales $656,000
Cost of goods sold $437,000
Gross profit $219,000
Selling expenses $105,000
Administrative expenses $41,000
Total expenses $146,000
Net income $73,000
Explanation:
a) Data and Calculations:
Sales $656,000
Direct labor cost $80,000
Raw material purchases $135,000
Selling expenses $105,000
Administrative expenses $41,000
Manufacturing overhead
applied to work in process $201,000
Actual manufacturing
overhead costs $222,000
Under-applied overhead $21,000 ($222,000 - $201,000)
Investing $2,000,000 in TQM's Channel Support Systems initiative will at a minimum increase demand for your products 1.7% in this and in all future rounds. (Refer to the TQM Initiative worksheet in the CompXM.xls Decisions menu.) Looking at the Round 0 Inquirer for Andrews, last year's sales were $163,189,230. Assuming similar sales next year, the 1.7% increase in demand will provide $2,774,217 of additional revenue. With the overall contribution margin of 34.1%, after direct costs this revenue will add $946,008 to the bottom line. For simplicity, assume that the demand increase and margins will remain at last year's levels. How long will it take to achieve payback on the initial $2,000,000 TQM investment, rounded to the nearest month
When computer users have trouble with their machines or software, Roland is the first person they call for help. Roland helps users with their problems, or refers them to a more-experienced IT employee. Roland holds the position of __________ in the organization.
Question Completion with Options:
Support Analyst
Systems Analyst
Database Administrator
Network Administrator
Answer:
Support Analyst
Explanation:
Since Roland provides primary technical support to end-users, sorting out hardware and software problems for them, he is an IT Support Analyst. Roland should also respond to, document, and resolve service calls with the hardware or software. Some support analysts specialize in specific areas of the IT department, for example, applications. Others provide general technical support to computer end-users.
The following information relating to a company's overhead costs is available. Actual total variable overhead $ 73,000 Actual total fixed overhead $ 17,000 Budgeted variable overhead rate per machine hour $ 2.50 Budgeted total fixed overhead $ 15,000 Budgeted machine hours allowed for actual output 30,000 Based on this information, the total variable overhead variance is:
Answer: $2,000 favorable
Explanation:
Total variable overhead variance = Budgeted variable overhead - Actual total variable overhead
Budgeted variable overhead = Budgeted machine hours allowed for actual output * Budgeted variable overhead rate per machine hour
= 30,000 * 2.50
= $75,000
Total variable overhead variance = 75,000 - 73,000
= $2,000 favorable
Favorable because the actual amount was less than the budgeted one.
Crawley, Inc. has a line of credit with HNC Bank that allows the company to borrow up to $800,000 at an interest rate of 12 percent. However, Crawley, Inc. must keep a compensating balance of 18 percent of any amount borrowed on deposit at the bank. Crawley, Inc. does not normally keep a cash balance account with HNC Bank. What is the effective annual cost of credit?
Answer: 14.63%
Explanation:
Based on the information given in the question, the effective annual cost of credit will be calculated as:
Effective annual cost of credit = [Interest rate/ (100 - Deposit Rate)] x 100
= [12 /(100 - 18)] x 100
= (12 / 82) × 100
= 0.1463 × 100
= 14.63%
The effective annual cost of credit is 14.63%.
When comparing the results of using the direct, sequential, and reciprocal services methods of allocating support department costs to production departments, which of the following statements is true for a manufacturing company that has a total of $1,500,000 in support costs to allocate?
a.The reciprocal services method allocates more than $1,500,000 to the production departments.
b.The reciprocal services method can be viewed as a compromise on accuracy and difficulty in allocating the $1,500,000 because it considers some, though not all, inter-support-department services and is easier to compute than the direct method.
c.The direct method yields the most accurate allocation of the $1,500,000.
d.The sequential method can be viewed as a compromise on accuracy and difficulty in allocating the $1,500,000 because it considers some, though not all, inter-support-department services and is easier to compute than the reciprocal services method.
Answer: d. The sequential method can be viewed as a compromise on accuracy and difficulty in allocating the $1,500,000 because it considers some, though not all, inter-support-department services and is easier to compute than the reciprocal services method
Explanation:
For a a manufacturing company that has a total of $1,500,000 in support costs to allocate, it should be noted that the sequential method can be viewed as a compromise on accuracy and difficulty in allocating the $1,500,000 because it considers some, though not all, inter-support-department services and is easier to compute than the reciprocal services method
Pick a major U.S. industry, such as automobiles or computers, and discuss the lapses in technology and innovation on the domestic front that permitted foreign competitors to get a foothold and, in some cases, a dominant share of the market. Who or what do you think was to blame for this situation?
Learn more:
brainly.com/question/7443371
You wish to retire in 20 years, at which time you want to have accumulated enough money to receive an annual annuity of $30,000 for 25 years after retirement. During the period before retirement you can earn 11 percent annually, while after retirement you can earn 13 percent on your money. What annual contributions to the retirement fund will allow you to receive the $30,000 annuity
Answer:
$3,425.08
Explanation:
The computation of the annual contributions to the retirement fund is shown below:
The Present value of the annuity is
= $30,000 × [1 - (1 ÷ (1 + 13%)^25)] ÷ 13%
= $219,899.55
Now
Future value of annuity = P×[(1+r)^n-1]÷r
$219,899.55 = P×[(1+11%)^20-1]÷11%
Hence, Annual contribution required, P = $3,425.08
On StatSim, how does a firm get their market share to increase?
Answer:
I need some points please
D Corporation applies manufacturing overhead to jobs using a predetermined overhead rate of 75% of direct labor cost. Any under of overapplied manufacturing overhead cost is closed out to Cost of Goods Sold at the end of the month. During May, the following transactions were recorded by the company:
Raw materials (all direct materials):
Purchased during the month $38,000
Used in production $35,000
Labor:
Direct labor-hours worked during the month 3,150
Direct labor cost incurred $30,000
Manufacturing overhead cost Incurred (total) $24,500
Inventories:
Raw materials (all direct), May 31 $8,000
Work in process, May 1 $9,000
Work in process, May 31 $12,000
Contains $4,400 in direct labor cost.
The Cost of Goods Manufactured for May was:____.
a. $84,500.
b. $95,000.
c. $75,500.
d. $81,500.
Answer:
D Corporation
The Cost of Goods Manufactured for May was:____.
a. $84,500.
Explanation:
a) Data and Calculations:
Predetermined overhead rate = 75% of direct labor cost
Raw materials (all direct materials):
Purchased during the month $38,000
Used in production $35,000
Labor:
Direct labor-hours worked during the month 3,150
Direct labor cost incurred $30,000
Manufacturing overhead cost Incurred (total) $24,500
Inventories:
Raw materials (all direct), May 31 $8,000
Work in process, May 1 $9,000
Work in process, May 31 $12,000
Contains $4,400 in direct labor cost.
Cost of Goods Manufactured:
Work in process
Beginning balance May 1 $9,000
Raw materials used $35,000
Direct labor cost incurred $30,000
Overhead applied 22,500
Cost of goods manufactured $84,500
Work in process, May 31 $12,000
Determining Market-Based and Negotiated Transfer Prices
Carreker, Inc., has a number of divisions, including the Alamosa Division, producer of surgical blades, and the Tavaris Division, a manufacturer of medical instruments.
Alamosa Division produces a 2.6 cm steel blade that can be used by Tavaris Division in the production of scalpels. The market price of the blade is $22.00. Cost information for the blade is:
Variable product cost $ 9.60
Fixed cost 6.00
Total product cost $15.60
Tavaris needs 15,000 units of the 2.6 cm blade per year. Alamosa Division is at full capacity (90,000 units of the blade).
Required:
Round your answers to the nearest cent.
If Carreker, Inc., has a transfer pricing policy that requires transfer at full product cost, what would the transfer price be?
$ per unit
Do you suppose that Alamosa and Tavaris divisions would choose to transfer at that price?
Alamosa
Tavaris
Answer:
Carreker, Inc.
The transfer price per unit is $15.60.
Travaris would choose to transfer at this full cost price of $15.60 per unit, while Alamosa would choose to transfer at the market price of $22.00 per unit.
Explanation:
a) Data and Calculations:
Divisions: Alamosa and Tavaris
Market price of blade per unit = $22
Production costs:
Variable product cost $ 9.60
Fixed cost 6.00
Total product cost $15.60
Units of the blade required by Tavaris = 15,000
Full product cost, transfer price = $15.60 per unit
Total transfer price = $234,000 (15,000 * $15.60)
Choice price per unit:
Alamosa = $22.00
Tavaris = $15.60
True or false: Some contemporary models of communications have reconceptualized the classic Think-Feel-Do model to the Do-Think-Feel model to reflect more accurately actual communications effects given a particular type of product or purchase occasion. True Fals
Answer:
true
Explanation:
got it from quizlet.
Assuming no change in government spending, an decrease in taxes of $100 billion with an MPC of 0.90 will add a total of $_____________ billion to the economy after the multiplier effect.
A. 800
B. 400
C. 500
D. 900
Answer:
D. 900
Explanation:
MPC = 0.90
The multiplier = MPC \ {1 - MPC} = 0.90 / (1-0.90) = 0.90 / 0.10 = 9
The Effect = Decrease in taxes * Spending multiplier
The Effect = $100 * 9
The Effect = $900
So, an decrease in taxes of $100 billion with an MPC of 0.90 will add a total of $900 billion to the economy after the multiplier effect.
A manufacturing company that produces a single product has provided the following data concerning its most recent month of operations: Selling price $ 146 Units in beginning inventory 0 Units produced 2,470 Units sold 2,040 Units in ending inventory 430 Variable costs per unit: Direct materials $ 50 Direct labor $ 20 Variable manufacturing overhead $ 11 Variable selling and administrative expense $ 19 Fixed costs: Fixed manufacturing overhead $ 69,160 Fixed selling and administrative expense $ 20,400 The total gross margin for the month under absorption costing is:
Answer:
Total gross margin= $75,480
Explanation:
Giving the following information:
Selling price $ 146
Units in beginning inventory 0
Units produced 2,470
Units sold 2,040
Variable costs per unit:
Direct materials $ 50
Direct labor $ 20
Variable manufacturing overhead $ 11
Fixed costs:
Fixed manufacturing overhead $ 69,160
The absorption costing method includes all costs related to production, both fixed and variable. The unit product cost is calculated using direct material, direct labor, and total unitary manufacturing overhead.
First, we need to calculate the unitary production cost:
Unit product cost= direct material + direct labor + total unitary overhead
Unitary fixed overhead= 69,160 / 2,470= $28
Unit product cost= 50 + 20 + (11 + 28)= $109
Now, the gross margin:
Unitary Gross margin= selling price - Unit product cost
Unitary Gross margin= 146 - 109
Unitary Gross margin= $37
Total gross margin= 37*2,040
Total gross margin= $75,480
The purpose of an analysis of an account is to illustrate - in the account for the period under audit
Answer:
all changes
Explanation:
Financial accounting is an accounting technique used for analyzing, summarizing and reporting of financial transactions like sales costs, purchase costs, payables and receivables of an organization using standard financial guidelines such as Generally Accepted Accounting Principles (GAAP).
An auditor refers to an authorized individual who review, examine and verify the authenticity and accuracy of business financial records or transactions.
The purpose of an analysis of an account is to illustrate all changes in the account for the period under audit. Thus, an audit of historical financial statements most commonly includes the balance sheet, income statement, statement of cash flows, and the statement of changes in stockholders' equity.
There are two (2) main types of financial analysis;
I. Vertical analysis.
II. Horizontal analysis.
In Financial accounting, Horizontal analysis can be defined as an analysis and evaluation of a financial statement which illustrates or gives information about changes in the amount of corresponding financial statement items, benchmarks or financial ratio over a specific period of time. It is one of the most important technique that is used to measure how a business is doing financially. Hence, it is also referred to as the trend analysis.
Under the horizontal analysis of financial statement, we use the financial statements of two or more periods; earliest and latter periods.
Generally, the earliest is chosen as the base period while all other items on the statement for a latter period will be compared with the items on the statement of the base period.
On August 1, Batson Company issued a 60-day note with a face amount of $49,800 to Jergens Company for merchandise inventory. (Assume a 360-day year is used for interest calculations.) a. Determine the proceeds of the note assuming the note carries an interest rate of 8%. fill in the blank 1 b. Determine the proceeds of the note assuming the note is discounted at 8%.
Answer: See explanation
Explanation:
a. Determine the proceeds of the note assuming the note carries an interest rate of 8%.
The proceeds of the note is the face value which is $49800.
b. Determine the proceeds of the note assuming the note is discounted at 8%.
Face amount: $49800
Less: Interest = $49800 × 8% × 60/360 = $664
Proceed of the note = $49136
g provides the following income statement for 20X9: Net Sales $240,000 Cost of Goods Sold 110,000 Gross Profit $130,000 Operating Expenses: Selling Expenses 45,000 Administrative Expenses 12,000 Total Operating Expenses 57,000 Operating Income $73,000 Other Income and (Expenses): Loss on Sale of Capital Assets (29,000) Interest Expense (1000) Total Other Income and (Expenses) (30,000) Income Before Income Taxes $43,000 Income Tax Expense 5000 Net Income $38,000 Calculate the times-interest-earned ratio.
Answer: 44 times
Explanation:
Times interest earned ratio aims to show just how much the company is able to cover its interest obligations using its operating income.
Times interest earned ratio = Net income before interest / Interest expense
Net income before interest = Operating income loss on sale of capital assets
= 73,000 - 29,000
= $44,000
Times interest earned ratio = 44,000 / 1,000
= 44 times
One of the most-often sold items at a grocery store is frozen pizzas. The weekly demand for frozen pizzas at a local grocery store is 10,000 pizzas. Whenever a new order is placed for a batch of frozen pizzas, the grocery store incurs a cost of $20. The holding costs are $0.10 per frozen pizza per week. Determine the EOQ for frozen pizzas.
Answer: 2,000 pizzas
Explanation:
Economic Order Quantity (EOQ) allows a business to calculate the optimal amount of units it should order given its ordering and holding costs as well as demand.
EOQ = √((2 * Weekly demand * Ordering costs) / Holding cost)
= √(( 2 * 10,000 * 20) / 0.10
= √ (400,000 / 0.10)
= 2,000 pizzas
Which of the following are steps in process costing? Select one: A. Visualize the physical flow of units B. Calculate the equivalent units C. Determine the per-unit costs D. Calculate the Cost of Goods Manufactured and the Ending WIP Inventory E. All of the above
Answer: E. All of the above
Explanation:
In process costing, all of the above are used. Process costing is used for the production of goods that a re homogenous so the cost is the same for all the goods.
First one must visualize the flow of the goods to see the costs they incur at each stage. The equivalent units should then be calculated as this would show the number of units that the cost is being assigned to. Next is to divide the costs incurred by the equivalent units to find the cost per unit. Then calculate the cost of goods manufactured based on the manufactured and ending inventory
Which of these are good ways to find a buyer’s agent?
Answer:
1.Search online.
2.Interview agents.
EcoFabrics has budgeted overhead costs of $982,800. It has allocated overhead on a plantwide basis to its two products (wool and cotton) using direct labor hours which are estimated to be 468,000 for the current year. The company has decided to experiment with activity-based costing and has created two activity cost pools and related activity cost drivers. These two cost pools are cutting (cost driver is machine hours) and design (cost driver is number of setups). Overhead allocated to the cutting cost pool is $374,400 and $608,400 is allocated to the design cost pool. Additional information related to these pools is as follows.\
Wool Cotton Total Machine hours 104,000 104,000 208,000 Number of setups 1,040 520 1,560 Calculate the overhead rate using activity based costing. (Round answers to 2 decimal places, e.g. 12.25.)
Overhead rates for activity-based costing Cutting $________per machine hour Design $_______per setup
Determine the amount of overhead allocated to the wool product line and the cotton product line using activity-based costing.
Wool product line Cotton product line Overhead Allocated $____________ for the wool product line $__________ cotton product line.
Calculate the overhead rate using traditional approach. (Round answer to 2 decimal places, e.g. 12.25.) Overhead rates using the traditional approach $ _____________per direct labor hour
Answer:
Hence the answer is given as follows,
Calculation of Activity rate:-
What is the IRR, assuming an industrial building can be purchased for $250,000 and is expected to yield cash flows of $18,000 for each of the next five years and be sold at the end of the fifth year for $280,000
Answer:
9.2%
Explanation:
Internal rate of return is the discount rate that equates the after-tax cash flows from an investment to the amount invested
IRR can be calculated with a financial calculator
Cash flow in year 0 = $-250,000
Cash flow in year 1 = $18,000
Cash flow in year 2 = $18,000
Cash flow in year 3 = $18,000
Cash flow in year 4 = $18,000
Cash flow in year 5 = $18,000 + $280,000
IRR = 9.2%
To determine IRR using a financial calculator:
1. Input the cash flow values by pressing the CF button. After inputting the value, press enter and the arrow facing a downward direction.
2. After inputting all the cash flows, press the IRR button and then press the compute button.
Midyear on July 31st, the Digby Corporation's balance sheet reported: Total Assets of $210.761 million Total Common Stock of $6.350 million Cash of $10.050 million Retained Earnings of $47.491 million. What were the Digby Corporation's total liabilities
Answer:
the Digby Corporation's total liabilities is $156.92 million
Explanation:
The computation of the total liabilities is given below:
Total Liabilities is
= Total Asset - (Total Common Stock + Retained Earnings)
= $210.761 - ($6.350 + $47.491)
= $210.761 - $6.350 - $47.491
= $156.92 million
Hence, the Digby Corporation's total liabilities is $156.92 million
The same should be relevant
